Description : In the metallurgy of iron, when limestone is added to the blast furnace,the calcium ions end up in
Last Answer : In the metallurgy of iron, when limestone is added to the blast furnace,the calcium ions end up ... B. Gangue C. Metallic calcium D. Calcium Carbonate
Description : Pick out the wrong statement. (A) Dry process is used for the manufacture of cement, when the raw material is blast furnace slag (B) Portland cement is made employing wet process (C) Gypsum is added to Portland cement to lengthen its setting time (D) None of these
Last Answer : (D) None of these
Description : Limestone is added in the blast furnace (during pig iron manufacture) to (A) Form slag by combining with impurities (B) Supply heat by undergoing exothermic reaction with impurities (C) Reduce the coke consumption (D) Reduce slag viscosity
Last Answer : Option A
Description : Consider the follwing complexes ion `P,Q` and `R` `P =[FeF_(6)]^(3-), Q=[V(H_(2)O)_(6)]^(2+)` and `R=[Fe(H_(2)O)_(6)]^(2+)` The correct order of the c
Last Answer : Consider the follwing complexes ion `P,Q` and `R` `P =[FeF_(6)]^(3-), Q=[V(H_(2)O)_(6)]^(2+)` and `R=[Fe( ... lt P` C. `R lt P lt Q` D. `Q lt P lt R`
Description : The hybridisation and unpaired electrons in `[Fe(H_(2)O)_(6)^(2+)]` ion are :
Last Answer : The hybridisation and unpaired electrons in `[Fe(H_(2)O)_(6)^(2+)]` ion are : A. `sp^(3)d^(2)`,4 B. `d^(2)sp^ ... . `d^(2)sp^(3)`,4 D. `sp^(3)d^(2),2`
Description : In nitroprusside ion the iron and NO exist as Fe (II) and `NO^(+)` rather than the Fe(III) and NO. these forms can be differentiated by
Last Answer : In nitroprusside ion the iron and NO exist as Fe (II) and `NO^(+)` rather than the ... state magnetic moment. D. thermally decomposing the compound.
Description : The acidic aqueous solution of ferrous ion forms a brown complex in the presence of `NO_(3)^(Θ)` by the follwing two steps: `[Fe(H_(2)O)_(6)]^(2+) +NO
Last Answer : The acidic aqueous solution of ferrous ion forms a brown complex in the presence of `NO_(3)^(Θ)` ... + H_(2)O` Complete and balance the equations .
Description : Sulphide ion reacts with `[Fe(CN)_(5)NO]` to form a purple coloured compound (X). In this reaction oxidation state of iron .
Last Answer : Sulphide ion reacts with `[Fe(CN)_(5)NO]` to form a purple coloured compound (X). In this reaction ... . changes from +2 to +4 D. does not change.
Description : Most bacteria do not require the ion a. Mg2+ b. Ca2+ c. Na+ d. Fe+2
Last Answer : Ans: C
Description : Extraction of copper is done using copper pyrites. After roasting, the ore is mixed with silica and coke and then smelted in a blast furnace. The matt
Last Answer : Extraction of copper is done using copper pyrites. After roasting, the ore is mixed with silica and coke and ... D. `Cu_(2)O +FeO`(large amount).
Last Answer : Extraction of copper is done using copper pyrites. After roasting, the ore is mixed with silica and coke and then ... CaSiO_(3)` D. `Cu_(2)O.SiO_(2)`
Last Answer : Extraction of copper is done using copper pyrites. After roasting, the ore is mixed with silica and coke and ... (3)` D. To check the reduction of FeO
Last Answer : Extraction of copper is done using copper pyrites. After roasting, the ore is mixed with silica and coke and then ... O` D. `CuCO_(3).Cu(OH)_(2)`
Description : During the extraction of iron in the blast furnace ,
Last Answer : During the extraction of iron in the blast furnace , A. Coke acts as reducing agent in the lower ... and Coke acts as reducing agent in the upper zone
Description : Near the top of the blast furnace, iron oxides are reduced to …… by carbon monoxide .
Last Answer : Near the top of the blast furnace, iron oxides are reduced to …… by carbon monoxide . A. C B. CO C. `CO_(2)` D. `CaCO_(3)`
Description : In the extraction of iron in the blast furnace, the reducing agent for the ore is
Last Answer : In the extraction of iron in the blast furnace, the reducing agent for the ore is A. Carbon monoxide B. Carbon dioxide C. Carbon D. Silica
Description : The main reactions occuring in blast furnace during extraction of iron from haematite ore…..
Last Answer : The main reactions occuring in blast furnace during extraction of iron from haematite ore .. A. `Fe_(2)O_ ... 3Cto2Fe+3CO` D. `CaO+SiO_(2)toCaSiO_(2)`
Description : In the extraction of copper the smelt formed in the blast furnace contians
Last Answer : In the extraction of copper the smelt formed in the blast furnace contians A. `CuS+"little"FeS` B. `Cu_(2) ... )O+"little"FeS` D. `Cu_(2)O+"little"FeO
Description : The flux used in the extraction of iron from Haematite in te blast furnace is `"["EAM(ENG)2014"]"`
Last Answer : The flux used in the extraction of iron from Haematite in te blast furnace is `"["EAM(ENG)2014"]"` A. Lime stone B. Silica C. Coke D. CO
Description : The iron formed in blast furnace is calle d
Last Answer : The iron formed in blast furnace is calle d A. Pig iron B. Wrought iron C. Steel D. Cast iron
Description : The slag formed in the blast furnace during the extraction of iron from haematite is
Last Answer : The slag formed in the blast furnace during the extraction of iron from haematite is A. `Ca_(3)(PO_(4))_(2)` ... (3)` C. `FeSiO_(3)` D. `MnSiO_(3)`
Description : A mixture of haematite, coke and limestone on heating in blast furnace gives molten iron metal. This is known as
Last Answer : A mixture of haematite, coke and limestone on heating in blast furnace gives molten iron metal. ... Smelting B. Calcination C. Roasting D. Liquition
Description : In the extraction of copper, the slag formed in the blast furnace is
Last Answer : In the extraction of copper, the slag formed in the blast furnace is A. `CaSiO_(3)` B. `FeSiO_(3)` C. `FeSiO_(3)` D. `MnSiO_(3)`
Description : What is the viscosity of slag of blast furnace?
Last Answer : What is the answer ?
Description : What is top pressure in blast furnace?
Description : The iron obtained direct from the blast furnace is called?
Last Answer : Pig iron
Description : Petroleum coke is used mainly in the (A) Discoloration of yellow glycerine (B) Sugar refining (C) Manufacture of carbon electrode (D) Blast furnace for reduction of iron ore
Last Answer : (C) Manufacture of carbon electrode
Description : The most efficient equipment for the removal of sub-micronic dust particles from blast furnace gas is the (A) Venturi atomiser (B) Gravity settling chamber (C) Electro-static precipitator (D) Cyclone separator
Last Answer : (C) Electro-static precipitator
Description : Raw materials are charged in the iron blast furnace using (A) Bucket elevator (B) Skip hoist (C) Screw conveyor (D) None of these
Last Answer : (B) Skip hoist
Description : The impure iron (pig iron) that is tapped out from blast furnace contains about __________ percent carbon. (A) 0.2 (B) 2 (C) 4 (D) 8
Last Answer : (C) 4
Description : Why is flux used in the blast furnace?
Last Answer : Flux in extraction of iron is limestone. Limestone reacts with the sand present as impurity in the ore forming calcium silicate which is taken out of the blast furnace as slag.
Description : Out of the following fuels used in a furnace exhausting flue gas at a temperature of 600°C, the percentage stack loss will be maximum in case ofcomplete combustion of (A) Furnace oil with air (B) Furnace oil with oxygen (C) Blast furnace gas with air (D) Blast furnace gas with oxygen
Last Answer : (C) Blast furnace gas with air
Description : Coke ovens in steel plant are heated by (A) Electricity (B) Blast furnace gas/mixed gas (C) Coke oven gas (D) Both (B) and (C)
Last Answer : (D) Both (B) and (C)
Description : __________ atmosphere is maintained inside an iron blast furnace. (A) Oxidising (B) Reducing (C) Inert (D) Decarburising
Last Answer : (B) Reducing
Description : Thermal efficiency of blast furnace stoves used for heating blast (air) may be about __________ percent. (A) 20 (B) 40 (C) 60 (D) 80
Last Answer : (D) 80
Description : Which one is not an induced draught furnace? (A) Blast furnace stove (B) Sintering furnace (C) High pressure boiler (D) None of these
Last Answer : (A) Blast furnace stove
Description : Heat transfer takes place through a liquid medium surrounding the submerged material under heating, in case of a/an (A) Blast furnace (B) Steam boiler (C) Salt bath furnace (D) Annealing furnace
Last Answer : (C) Salt bath furnace
Description : Reducing atmosphere is maintained in a (A) Calcination kiln (B) Blast furnace (C) Soaking pit (D) L.D. converter
Last Answer : (B) Blast furnace
Description : Blast furnace stoves are meant for heating (A) Air (B) Blast furnace gas (C) Steam (D) None of these
Last Answer : (A) Air
Description : Operation of blast furnace stove is based on the principles of a __________ furnace. (A) Regenerative (B) Recuperative (C) Both (A) and (B) (D) Neither (A) nor (B)
Last Answer : (A) Regenerative
Description : Regenerators are used for waste heat recovery in (A) By-product coke ovens (B) Beehive coke oven (C) Blast furnace stoves (D) Soaking pits
Last Answer : (A) By-product coke ovens
Description : Fuel used in B.F. stove is (A) Pulverised coal (B) Furnace oil (C) Blast furnace gas/mixed gas (D) Coke oven gas
Last Answer : (C) Blast furnace gas/mixed gas
Description : Which furnace employs an I.D. fan for the removal of flue gases from the furnace? (A) Coke oven (B) Blast furnace stoves (C) Beehive coke oven (D) High pressure boiler
Last Answer : (D) High pressure boiler
Description : An example of shaft furnace is the (A) L.D. converter (B) Glass melting tank (C) Blast furnace (D) Soaking pit
Last Answer : (C) Blast furnace
Description : . An example of a periodic furnace is the (A) Blast furnace stoves (B) Blast furnace (C) Coke oven heating chamber (D) Rotary kilns
Last Answer : (A) Blast furnace stoves
Description : Size of blast furnace grade coke is __________ mm. (A) 25-80 (B) 0-15 (C) 15-25 (D) > 100
Last Answer : (A) 25-80
Description : Which of the following is not a by-product fuel? (A) Producer gas (B) Blast furnace gas (C) Coke oven gas (D) Refinery gas
Last Answer : (A) Producer gas
Description : Which of the following has the least calorific value (kcal/Nm3 )? (A) Blast furnace gas (B) Coke oven gas (C) Sewage gas (D) Natural gas
Last Answer : (A) Blast furnace gas
Description : Which of the following gaseous fuels has the lowest calorific value? (A) Gobar gas (B) Refinery gas (C) Converter gas (D) Blast furnace gas
Last Answer : (D) Blast furnace gas
Description : Which of the following is the most reactive (as regards the formation of CO + H2 from C + H2O)? (A) Blast furnace coke (B) Low temperature coke (C) Anthracite coal (D) Sub-bituminous coa
Last Answer : (B) Low temperature coke