Description : __________ is used as a flux in the extraction of iron from iron ore (haematite) in blast furnace. (A) Bauxite (B) Limestone (C) Quartz (D) Manganese
Last Answer : (B) Limestone
Description : The main reactions occuring in blast furnace during extraction of iron from haematite ore…..
Last Answer : The main reactions occuring in blast furnace during extraction of iron from haematite ore .. A. `Fe_(2)O_ ... 3Cto2Fe+3CO` D. `CaO+SiO_(2)toCaSiO_(2)`
Description : The slag formed in the blast furnace during the extraction of iron from haematite is
Last Answer : The slag formed in the blast furnace during the extraction of iron from haematite is A. `Ca_(3)(PO_(4))_(2)` ... (3)` C. `FeSiO_(3)` D. `MnSiO_(3)`
Description : A mixture of haematite, coke and limestone on heating in blast furnace gives molten iron metal. This is known as
Last Answer : A mixture of haematite, coke and limestone on heating in blast furnace gives molten iron metal. ... Smelting B. Calcination C. Roasting D. Liquition
Description : During the extraction of iron in the blast furnace ,
Last Answer : During the extraction of iron in the blast furnace , A. Coke acts as reducing agent in the lower ... and Coke acts as reducing agent in the upper zone
Description : In the extraction of iron in the blast furnace, the reducing agent for the ore is
Last Answer : In the extraction of iron in the blast furnace, the reducing agent for the ore is A. Carbon monoxide B. Carbon dioxide C. Carbon D. Silica
Description : Extraction of copper is done using copper pyrites. After roasting, the ore is mixed with silica and coke and then smelted in a blast furnace. The matt
Last Answer : Extraction of copper is done using copper pyrites. After roasting, the ore is mixed with silica and coke and ... D. `Cu_(2)O +FeO`(large amount).
Last Answer : Extraction of copper is done using copper pyrites. After roasting, the ore is mixed with silica and coke and then ... CaSiO_(3)` D. `Cu_(2)O.SiO_(2)`
Last Answer : Extraction of copper is done using copper pyrites. After roasting, the ore is mixed with silica and coke and ... (3)` D. To check the reduction of FeO
Last Answer : Extraction of copper is done using copper pyrites. After roasting, the ore is mixed with silica and coke and then ... O` D. `CuCO_(3).Cu(OH)_(2)`
Description : In the extraction of copper the smelt formed in the blast furnace contians
Last Answer : In the extraction of copper the smelt formed in the blast furnace contians A. `CuS+"little"FeS` B. `Cu_(2) ... )O+"little"FeS` D. `Cu_(2)O+"little"FeO
Description : In the extraction of copper, the slag formed in the blast furnace is
Last Answer : In the extraction of copper, the slag formed in the blast furnace is A. `CaSiO_(3)` B. `FeSiO_(3)` C. `FeSiO_(3)` D. `MnSiO_(3)`
Description : The reaction (s) which does (do) not occur in the reduction zone in the extraction of iron from haematite ore is (are)
Last Answer : The reaction (s) which does (do) not occur in the reduction zone in the extraction of iron from haematite ore ... ` D. `CaO + SiO_(2) rarr CaSiO_(3)`
Description : Consider the following statements and arrange in the order of true/false as given in the codes.`S_(1)`: In extraction of iron from haematite ore, the
Last Answer : Consider the following statements and arrange in the order of true/false as given in the codes.`S_(1)`: In ... `. A. TFTT B. FTFF C. FFTT D. TFFT
Last Answer : The reaction (s) which does (do) not occur in the reduction zone in the extraction of iron from haematite ore ... ` D. `CaO + SiO_(2) rarr CaSiO_(2)`
Description : Consider the following statements in the extraction of iron from haematite: (I) `CO`is the main reducing agent (II) `Fe_(2)O_(3)`is used to oxidise th
Last Answer : Consider the following statements in the extraction of iron from haematite: (I) `CO`is the main reducing agent (II) ... I, II and III D. I, II and IV
Description : In the extraction of iron from haematitie, the charge used is haematite, coke and lime stone in the following weight ration
Last Answer : In the extraction of iron from haematitie, the charge used is haematite, coke and lime stone in the following weight ration ... C. `8:1:4` D. `1:4:8`
Description : State the role of lime stone in the extraction of iron from haematite. Or Why is lime stone added during the extraction of iron?
Last Answer : Limestone reacts with the sand present as impurity in the ore forming calcium silicate which is taken out of the blast furnace as slag.
Description : Why is flux used in the blast furnace?
Last Answer : Flux in extraction of iron is limestone. Limestone reacts with the sand present as impurity in the ore forming calcium silicate which is taken out of the blast furnace as slag.
Description : Limestone addition in the blast furnace is done to flux __________ present in the raw materials. (A) SiO2 (B) Al2O3 (C) MnO2 (D) P
Last Answer : Limestone addition in the blast furnace is done to flux __________ present in the raw materials. (A) SiO2 (B) Al2O3 (C) MnO2 (D) P
Description : Assertion: Wrough iron is prepared from cast iron by oxidising impurities in a reverberatory furnace lined with haematite. Reason: Haematite oxidises
Last Answer : Assertion: Wrough iron is prepared from cast iron by oxidising impurities in a reverberatory furnace lined ... -1 is false but Statement -2 is true
Description : In the metallurgy of iron, when limestone is added to the blast furnace,the calcium ions end up in
Last Answer : In the metallurgy of iron, when limestone is added to the blast furnace,the calcium ions end up ... B. Gangue C. Metallic calcium D. Calcium Carbonate
Description : Near the top of the blast furnace, iron oxides are reduced to …… by carbon monoxide .
Last Answer : Near the top of the blast furnace, iron oxides are reduced to …… by carbon monoxide . A. C B. CO C. `CO_(2)` D. `CaCO_(3)`
Description : The iron formed in blast furnace is calle d
Last Answer : The iron formed in blast furnace is calle d A. Pig iron B. Wrought iron C. Steel D. Cast iron
Description : The iron obtained direct from the blast furnace is called?
Last Answer : Pig iron
Description : Petroleum coke is used mainly in the (A) Discoloration of yellow glycerine (B) Sugar refining (C) Manufacture of carbon electrode (D) Blast furnace for reduction of iron ore
Last Answer : (C) Manufacture of carbon electrode
Description : Raw materials are charged in the iron blast furnace using (A) Bucket elevator (B) Skip hoist (C) Screw conveyor (D) None of these
Last Answer : (B) Skip hoist
Description : The impure iron (pig iron) that is tapped out from blast furnace contains about __________ percent carbon. (A) 0.2 (B) 2 (C) 4 (D) 8
Last Answer : (C) 4
Description : __________ atmosphere is maintained inside an iron blast furnace. (A) Oxidising (B) Reducing (C) Inert (D) Decarburising
Last Answer : (B) Reducing
Description : Yield of blast furnace gas is about __________ Nm3 /ton of pig iron. (A) 300 (B) 2000 (C) 5000 (D) 10000
Last Answer : (B) 2000
Description : Main use of hard coke produced by high temperature carbonisation is in the (A) Iron blast furnace (B) Cupola in foundries (C) Sinter making (D) Domestic ovens
Last Answer : (A) Iron blast furnace
Description : Which is the main reducing agent during production of iron from iron ore in a blast furnace? (A) C (B) CO (C) CO2 (D) H2
Last Answer : (B) CO
Description : The main charge in blast furnace is usually (A) Iron ore & coke (B) Iron ore, coke & air (C) Limestone, coke & iron ore (D) Limestone, sand & iron ore
Last Answer : Limestone, coke & iron ore
Description : Which of the following contributes maximum as main source of sulphur in the blast furnace charge? (A) Sinter (B) Coke (C) Iron ore (D) Limestone
Last Answer : Coke
Description : Specific gravity of hot metal (pig iron) is __________ times that of the blast furnace slag. (A) 2 (B) 3 (C) 0.8 (D) 6
Last Answer : (B) 3
Description : Limestone is added in the blast furnace (during pig iron manufacture) to (A) Form slag by combining with impurities (B) Supply heat by undergoing exothermic reaction with impurities (C) Reduce the coke consumption (D) Reduce slag viscosity
Last Answer : Option A
Description : Volume of blast furnace slag is about __________ times the volume of hot metal (pig iron) of the same weight (A) 1.5 (B) 3 (C) 5
Last Answer : Option B
Description : The main reducing agent in iron blast furnace is(A) Carbon dioxide (B) Carbon monoxide (C) Oxygen (D) Air
Description : Pick out the wrong statement. (A) Cold cracking of a weld is due to the presence of hydrogen gas in the weld (B) True stress is given by, σ = σE (1 + εE), where σE and εE ... in the iron blast furnace (D) High residual stress at the surface is beneficial for fatigue properties of a material
Last Answer : Option C
Description : The blast furnace gas is a byproduct in the production of pig iron in the blast furnace. A. Yes B. No
Last Answer : Answer: A
Description : Which of the following materials is used along with iron ore and limestone to produce iron in a modern blast furnace? w) coke x) cementite y) coal z) bauxite
Last Answer : ANSWER: W -- COKE
Description : 5. In "Imperial Smelting Process" for extraction of zinc, zinc vapour thus produced is quenched in the external condenser by the use of the following: (A) Jet of water at high pressure (B) Blast of air (C) Mixture of water and air (D) Rain of molten lead
Last Answer : Option D
Description : In the metallurgy of Fe, when `CaCo_(3)` is added to blast furnace, calcicum ion appears as
Last Answer : In the metallurgy of Fe, when `CaCo_(3)` is added to blast furnace, calcicum ion appears as A. CaO B. metallic C. ggangue D. slag
Description : What is the viscosity of slag of blast furnace?
Last Answer : What is the answer ?
Description : What is top pressure in blast furnace?
Description : The most efficient equipment for the removal of sub-micronic dust particles from blast furnace gas is the (A) Venturi atomiser (B) Gravity settling chamber (C) Electro-static precipitator (D) Cyclone separator
Last Answer : (C) Electro-static precipitator
Description : Out of the following fuels used in a furnace exhausting flue gas at a temperature of 600°C, the percentage stack loss will be maximum in case ofcomplete combustion of (A) Furnace oil with air (B) Furnace oil with oxygen (C) Blast furnace gas with air (D) Blast furnace gas with oxygen
Last Answer : (C) Blast furnace gas with air
Description : Coke ovens in steel plant are heated by (A) Electricity (B) Blast furnace gas/mixed gas (C) Coke oven gas (D) Both (B) and (C)
Last Answer : (D) Both (B) and (C)
Description : Thermal efficiency of blast furnace stoves used for heating blast (air) may be about __________ percent. (A) 20 (B) 40 (C) 60 (D) 80
Last Answer : (D) 80