What is top pressure in blast furnace?

1 Answer

Answer :

What is the answer ?

Related questions

Description : Near the top of the blast furnace, iron oxides are reduced to …… by carbon monoxide .

Last Answer : Near the top of the blast furnace, iron oxides are reduced to …… by carbon monoxide . A. C B. CO C. `CO_(2)` D. `CaCO_(3)`

Description : Which one is not an induced draught furnace? (A) Blast furnace stove (B) Sintering furnace (C) High pressure boiler (D) None of these

Last Answer : (A) Blast furnace stove

Description : Which furnace employs an I.D. fan for the removal of flue gases from the furnace? (A) Coke oven (B) Blast furnace stoves (C) Beehive coke oven (D) High pressure boiler

Last Answer : (D) High pressure boiler

Description : Extraction of copper is done using copper pyrites. After roasting, the ore is mixed with silica and coke and then smelted in a blast furnace. The matt

Last Answer : Extraction of copper is done using copper pyrites. After roasting, the ore is mixed with silica and coke and ... D. `Cu_(2)O +FeO`(large amount).

Description : Extraction of copper is done using copper pyrites. After roasting, the ore is mixed with silica and coke and then smelted in a blast furnace. The matt

Last Answer : Extraction of copper is done using copper pyrites. After roasting, the ore is mixed with silica and coke and then ... CaSiO_(3)` D. `Cu_(2)O.SiO_(2)`

Description : Extraction of copper is done using copper pyrites. After roasting, the ore is mixed with silica and coke and then smelted in a blast furnace. The matt

Last Answer : Extraction of copper is done using copper pyrites. After roasting, the ore is mixed with silica and coke and ... (3)` D. To check the reduction of FeO

Description : Extraction of copper is done using copper pyrites. After roasting, the ore is mixed with silica and coke and then smelted in a blast furnace. The matt

Last Answer : Extraction of copper is done using copper pyrites. After roasting, the ore is mixed with silica and coke and then ... O` D. `CuCO_(3).Cu(OH)_(2)`

Description : During the extraction of iron in the blast furnace ,

Last Answer : During the extraction of iron in the blast furnace , A. Coke acts as reducing agent in the lower ... and Coke acts as reducing agent in the upper zone

Description : In the metallurgy of iron, when limestone is added to the blast furnace,the calcium ions end up in

Last Answer : In the metallurgy of iron, when limestone is added to the blast furnace,the calcium ions end up ... B. Gangue C. Metallic calcium D. Calcium Carbonate

Description : In the extraction of iron in the blast furnace, the reducing agent for the ore is

Last Answer : In the extraction of iron in the blast furnace, the reducing agent for the ore is A. Carbon monoxide B. Carbon dioxide C. Carbon D. Silica

Description : The main reactions occuring in blast furnace during extraction of iron from haematite ore…..

Last Answer : The main reactions occuring in blast furnace during extraction of iron from haematite ore .. A. `Fe_(2)O_ ... 3Cto2Fe+3CO` D. `CaO+SiO_(2)toCaSiO_(2)`

Description : In the extraction of copper the smelt formed in the blast furnace contians

Last Answer : In the extraction of copper the smelt formed in the blast furnace contians A. `CuS+"little"FeS` B. `Cu_(2) ... )O+"little"FeS` D. `Cu_(2)O+"little"FeO

Description : The flux used in the extraction of iron from Haematite in te blast furnace is `"["EAM(ENG)2014"]"`

Last Answer : The flux used in the extraction of iron from Haematite in te blast furnace is `"["EAM(ENG)2014"]"` A. Lime stone B. Silica C. Coke D. CO

Description : The iron formed in blast furnace is calle d

Last Answer : The iron formed in blast furnace is calle d A. Pig iron B. Wrought iron C. Steel D. Cast iron

Description : The slag formed in the blast furnace during the extraction of iron from haematite is

Last Answer : The slag formed in the blast furnace during the extraction of iron from haematite is A. `Ca_(3)(PO_(4))_(2)` ... (3)` C. `FeSiO_(3)` D. `MnSiO_(3)`

Description : A mixture of haematite, coke and limestone on heating in blast furnace gives molten iron metal. This is known as

Last Answer : A mixture of haematite, coke and limestone on heating in blast furnace gives molten iron metal. ... Smelting B. Calcination C. Roasting D. Liquition

Description : In the metallurgy of Fe, when `CaCo_(3)` is added to blast furnace, calcicum ion appears as

Last Answer : In the metallurgy of Fe, when `CaCo_(3)` is added to blast furnace, calcicum ion appears as A. CaO B. metallic C. ggangue D. slag

Description : In the extraction of copper, the slag formed in the blast furnace is

Last Answer : In the extraction of copper, the slag formed in the blast furnace is A. `CaSiO_(3)` B. `FeSiO_(3)` C. `FeSiO_(3)` D. `MnSiO_(3)`

Description : What is the viscosity of slag of blast furnace?

Last Answer : What is the answer ?

Description : The iron obtained direct from the blast furnace is called?

Last Answer : Pig iron

Description : Petroleum coke is used mainly in the (A) Discoloration of yellow glycerine (B) Sugar refining (C) Manufacture of carbon electrode (D) Blast furnace for reduction of iron ore

Last Answer : (C) Manufacture of carbon electrode

Description : The most efficient equipment for the removal of sub-micronic dust particles from blast furnace gas is the (A) Venturi atomiser (B) Gravity settling chamber (C) Electro-static precipitator (D) Cyclone separator

Last Answer : (C) Electro-static precipitator

Description : Raw materials are charged in the iron blast furnace using (A) Bucket elevator (B) Skip hoist (C) Screw conveyor (D) None of these

Last Answer : (B) Skip hoist

Description : The impure iron (pig iron) that is tapped out from blast furnace contains about __________ percent carbon. (A) 0.2 (B) 2 (C) 4 (D) 8

Last Answer : (C) 4

Description : Why is flux used in the blast furnace?

Last Answer : Flux in extraction of iron is limestone. Limestone reacts with the sand present as impurity in the ore forming calcium silicate which is taken out of the blast furnace as slag.

Description : Out of the following fuels used in a furnace exhausting flue gas at a temperature of 600°C, the percentage stack loss will be maximum in case ofcomplete combustion of (A) Furnace oil with air (B) Furnace oil with oxygen (C) Blast furnace gas with air (D) Blast furnace gas with oxygen

Last Answer : (C) Blast furnace gas with air

Description : Coke ovens in steel plant are heated by (A) Electricity (B) Blast furnace gas/mixed gas (C) Coke oven gas (D) Both (B) and (C)

Last Answer : (D) Both (B) and (C)

Description : __________ atmosphere is maintained inside an iron blast furnace. (A) Oxidising (B) Reducing (C) Inert (D) Decarburising

Last Answer : (B) Reducing

Description : Thermal efficiency of blast furnace stoves used for heating blast (air) may be about __________ percent. (A) 20 (B) 40 (C) 60 (D) 80

Last Answer : (D) 80

Description : Heat transfer takes place through a liquid medium surrounding the submerged material under heating, in case of a/an (A) Blast furnace (B) Steam boiler (C) Salt bath furnace (D) Annealing furnace

Last Answer : (C) Salt bath furnace

Description : Reducing atmosphere is maintained in a (A) Calcination kiln (B) Blast furnace (C) Soaking pit (D) L.D. converter

Last Answer : (B) Blast furnace

Description : Blast furnace stoves are meant for heating (A) Air (B) Blast furnace gas (C) Steam (D) None of these

Last Answer : (A) Air

Description : Operation of blast furnace stove is based on the principles of a __________ furnace. (A) Regenerative (B) Recuperative (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (A) Regenerative

Description : Regenerators are used for waste heat recovery in (A) By-product coke ovens (B) Beehive coke oven (C) Blast furnace stoves (D) Soaking pits

Last Answer : (A) By-product coke ovens

Description : Fuel used in B.F. stove is (A) Pulverised coal (B) Furnace oil (C) Blast furnace gas/mixed gas (D) Coke oven gas

Last Answer : (C) Blast furnace gas/mixed gas

Description : An example of shaft furnace is the (A) L.D. converter (B) Glass melting tank (C) Blast furnace (D) Soaking pit

Last Answer : (C) Blast furnace

Description : . An example of a periodic furnace is the (A) Blast furnace stoves (B) Blast furnace (C) Coke oven heating chamber (D) Rotary kilns

Last Answer : (A) Blast furnace stoves

Description : Size of blast furnace grade coke is __________ mm. (A) 25-80 (B) 0-15 (C) 15-25 (D) > 100

Last Answer : (A) 25-80

Description : Which of the following is not a by-product fuel? (A) Producer gas (B) Blast furnace gas (C) Coke oven gas (D) Refinery gas

Last Answer : (A) Producer gas

Description : Which of the following has the least calorific value (kcal/Nm3 )? (A) Blast furnace gas (B) Coke oven gas (C) Sewage gas (D) Natural gas

Last Answer : (A) Blast furnace gas

Description : Which of the following gaseous fuels has the lowest calorific value? (A) Gobar gas (B) Refinery gas (C) Converter gas (D) Blast furnace gas

Last Answer : (D) Blast furnace gas

Description : Which of the following is the most reactive (as regards the formation of CO + H2 from C + H2O)? (A) Blast furnace coke (B) Low temperature coke (C) Anthracite coal (D) Sub-bituminous coa

Last Answer : (B) Low temperature coke

Description : Explosion limit of blast furnace gas is 37 to 71% gas in gas-air mixture. It means that the blast furnace gas will explode when burnt in a confined space, if its concentration in the gas-air mixture is __________ percent. (A) < 37% (B) > 71% (C) In between 37 & 71% (D) None of these

Last Answer : (C) In between 37 & 71%

Description : Blast furnace gas burns with a bluish flame, because of the presence of (A) CO (B) CH4 (C) CO2 (D) S

Last Answer : (A) CO

Description : Gross & net calorific value is the same for (A) Blast furnace gas (B) Coke oven gas (C) L.D. converter gas (D) None of these

Last Answer : (C) L.D. converter gas

Description : Mixed gas' used in steel plants is a mixture of (A) B.F. gas and coke oven gas (B) Coke oven gas and converter gas (C) Coke oven gas and L.P.G (D) Blast furnace gas and naphtha vapor

Last Answer : (A) B.F. gas and coke oven gas

Description : Dust content in raw blast furnace gas is about __________ gm/Nm3 ; hence it is cleaned to the dust level of about < 10 mg /Nm3 before use. (A) 15-30 (B) 1-2 (C) 70-100 (D) 150-200

Last Answer : (A) 15-30

Description : Which of the following is the most poisonous gas? (A) Coke oven gas (B) Producer gas (C) Blast furnace gas (D) L.D. converter gas

Last Answer : (D) L.D. converter gas

Description : Increase in ash content of blast furnace coke (A) Reduces its consumption in the furnace (B) Increases its consumption in the furnace (C) Does not affect its consumption in the furnace (D) Decreases its hardness and abrasion resistance

Last Answer : (B) Increases its consumption in the furnace

Description : Coke oven gas compared to blast furnace gas is (A) More explosive and inflammable (B) Less poisonous (C) Lighter (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)