A 2 m long wooden plank of mass 20 kg is pivoted (supported from below) at 0.5 m from either end. A person of mass 40 kg

A 2 m long wooden plank of mass 20 kg is pivoted (supported from below) at 0.5 m from either end. A person of mass 40 kg
by

1 Answer

Answer :

A 2 m long wooden plank of mass 20 kg is pivoted (supported from below) at 0.5 m from ... How far can the person walk before the plank topples?
by
selected by

Related questions

If the maximum shear stress at the end of a simply supported R.C.C. beam of 6 m effective span is 10 kg/cm2 , the share stirrups are provided for a distance from either end where, is (A) 50 cm (B) 100 cm(C) 150 cm (D) 200 cm

Description : If the maximum shear stress at the end of a simply supported R.C.C. beam of 6 m effective span is 10 kg/cm2 , the share stirrups are provided for a distance from either end where, is (A) 50 cm (B) 100 cm (C) 150 cm (D) 200 cm

Last Answer : Answer: Option C

A simply supported wooden beam 150 cm long and having a cross section 16 cm × 24 cm carries a concentrated load, at the centre. If the permissible stress ft = 75 kg/cm2 and fs= 10 kg/cm2 the safe load is (A) 3025 kg (B) 3050 kg (C) 3075 kg (D) 3100 kg

Description : A simply supported wooden beam 150 cm long and having a cross section 16 cm × 24 cm carries a  concentrated load, at the centre. If the permissible stress ft = 75 kg/cm2  and fs= 10 kg/cm2  the safe  load is  (A) 3025 kg  (B) 3050 kg  (C) 3075 kg  (D) 3100 kg 

Last Answer : (C) 3075 kg 

Supporting legs of a plate and frame filter is normally made of (A) Stainless steel (B) Cast iron (C) High speed steel (D) Wooden plank

Description : Supporting legs of a plate and frame filter is normally made of (A) Stainless steel (B) Cast iron (C) High speed steel (D) Wooden plank

Last Answer : (B) Cast iron

It is a wooden plank used for smoothening the soil and crushing the weed. a. Spring tooth harrow b. Acme tooth harrow d. None of the above

Description : It is a wooden plank used for smoothening the soil and crushing the weed. a. Spring tooth harrow b. Acme tooth harrow d. None of the above

Last Answer : Ans - c. Patela

it is made of wooden plank used for smoothing the soil and crushing the Weeds . A) Triangular harrow C Blade harrow B) Patela D Guntaka

Description : it is made of wooden plank used for smoothing the soil and crushing the Weeds . A) Triangular harrow C Blade harrow B) Patela D Guntaka

Last Answer : Patela 

If the maximum shear stress at the end of a simply supported R.C.C. beam of 16 m effective span is 10 kg/cm2 , the length of the beam having nominal reinforcement, is (A) 8 cm (B) 6 m (C) 8 m (D) 10 m

Description : If the maximum shear stress at the end of a simply supported R.C.C. beam of 16 m effective span is 10 kg/cm2 , the length of the beam having nominal reinforcement, is (A) 8 cm (B) 6 m (C) 8 m (D) 10 m

Last Answer : Answer: Option C

In a 2-mass 3 spring vibrating system the two masses each are of 9.8 kg coupling spring is having a stiffness of 3430 N/m whereas the other two springs have each a stiffness of 8820 N/m. The two natural frequencies in rad /sec are A) 10 & 20 B) 20 & 30 C) 30 & 40D) 40 & 50

Description : In a 2-mass 3 spring vibrating system the two masses each are of 9.8 kg coupling spring is having a stiffness of 3430 N/m whereas the other two springs have each a stiffness of 8820 N/m. The two natural frequencies in rad /sec are A) 10 & 20 B) 20 & 30 C) 30 & 40D) 40 & 50

Last Answer : C) 30 & 40

A simply supported beam 6 m long and of effective depth 50 cm, carries a uniformly distributed load 2400 kg/m including its self weight. If the lever arm factor is 0.85 and permissible tensile stress of steel is 1400 kg/cm2 , the area of steel required, is (A) 14 cm(B) 15 cm2(C) 16 cm2(D) 17 cm

Description : A simply supported beam 6 m long and of effective depth 50 cm, carries a uniformly distributed load 2400 kg/m including its self weight. If the lever arm factor is 0.85 and permissible tensile stress of steel is 1400 kg/cm2 ... area of steel required, is (A) 14 cm (B) 15 cm2 (C) 16 cm2 (D) 17 cm

Last Answer : Answer: Option C

The pole pieces of the magnet used in a pivoted coil galvanometer are

Description : The pole pieces of the magnet used in a pivoted coil galvanometer are

Last Answer : The pole pieces of the magnet used in a pivoted coil galvanometer are A. plane surfaces of a ... magnet D. cylindrical sufaces of a horse-shoe magnet

The galvanometer used in school and college laboratories is a __________ galvanometer. a) pivoted type b) astatic c) mirror d) none of these

Description : The galvanometer used in school and college laboratories is a __________ galvanometer. a) pivoted type b) astatic c) mirror d) none of these

Last Answer : a) pivoted type

A 8 metre long simply supported rectangular beam which carries a distributed load 45 kg/m. experiences a maximum fibre stress 160 kg/cm2 . If the moment of inertia of the beam is 640 cm4 , the overall depth of the beam is (A) 10 cm (B) 12 cm (C) 15 cm (D) 18 cm

Description : A 8 metre long simply supported rectangular beam which carries a distributed load 45 kg/m. experiences a maximum fibre stress 160 kg/cm2 . If the moment of inertia of the beam is 640 cm4 , the overall depth of the beam is (A) 10 cm (B) 12 cm (C) 15 cm (D) 18 cm

Last Answer : (A) 10 cm

The resultant of the following three couples 20 kg force, 0.5 m arm, +ve sense 30 kg force, 1 m arm, -ve sense 40 kg force, 0.25 m arm, +ve sense having arm of 0.5 m will be (A) 20 kg, -ve sense (B) 20 kg, +ve sense (C) 10 kg, +ve sense (D) 10 kg, -ve sense

Description : The resultant of the following three couples 20 kg force, 0.5 m arm, +ve sense 30 kg force, 1 m  arm, -ve sense 40 kg force, 0.25 m arm, +ve sense having arm of 0.5 m will be  (A) 20 kg, -ve sense  (B) 20 kg, +ve sense  (C) 10 kg, +ve sense  (D) 10 kg, -ve sense 

Last Answer : (A) 20 kg, -ve sense

A reinforced concrete cantilever beam is 3.6 m long, 25 cm wide and has its lever arm 40 cm. It carries a load of 1200 kg at its free end and vertical stirrups can carry 1800 kg. Assuming concrete to carry one-third of the diagonal tension and ignoring the weight of the beam, the number of shear stirrups required, is (A) 30 (B) 35 (C) 40 (D) 45

Description : A reinforced concrete cantilever beam is 3.6 m long, 25 cm wide and has its lever arm 40 cm. It carries a load of 1200 kg at its free end and vertical stirrups can carry 1800 kg. Assuming concrete to carry one- ... beam, the number of shear stirrups required, is (A) 30 (B) 35 (C) 40 (D) 45

Last Answer : Answer: Option C

The sill of a common wooden partition is (A) Vertical wooden member on either end (B) Lower horizontal wooden member (C) Upper horizontal wooden member (D) Intermediate horizontal wooden member

Description : The sill of a common wooden partition is (A) Vertical wooden member on either end (B) Lower horizontal wooden member (C) Upper horizontal wooden member (D) Intermediate horizontal wooden member

Last Answer : Answer: Option B

A cantilever shaft having 50 mm diameter and a length of 300mm has a disc of mass 100 kg at its free end. The Young’s modulus for the shaft material is 200 GN/m^2. Determine the static deflection of shaft in mm. A 0.144 B 0.244 C 0.344 D 0.444

Description : A cantilever shaft having 50 mm diameter and a length of 300mm has a disc of mass 100 kg at its free end. The Young’s modulus for the shaft material is 200 GN/m^2. Determine the static deflection of shaft in mm. A 0.144 B 0.244 C 0.344 D 0.444

Last Answer : A 0.144

A cantilever shaft having 50 mm diameter and a length of 300 mm has a disc of mass 100 kg at its free end. The Young’s modulus for the shaft material is 200 GN/m 3 . Determine the static deflection of the shaft in mm. a) 0.147 b) 0.213 c) 0.132 d) 0.112

Description : A cantilever shaft having 50 mm diameter and a length of 300 mm has a disc of mass 100 kg at its free end. The Young’s modulus for the shaft material is 200 GN/m 3 . Determine the static deflection of the shaft in mm. a) 0.147 b) 0.213 c) 0.132 d) 0.112

Last Answer : a) 0.147

A force of 100 Newtons acts for 0.5 seconds on a body of mass 20 kg which is initially at rest. The velocity attained by the body is a.20 m/s b.5 m/s c.2.5 m/s d.0.5 m/s e.107 dynes

Description : A force of 100 Newtons acts for 0.5 seconds on a body of mass 20 kg which is initially at rest. The velocity attained by the body is a.20 m/s b.5 m/s c.2.5 m/s d.0.5 m/s e.107 dynes

Last Answer : c. 2.5 m/s

A well penetrates to 30 m below the static water table. After 24 hours of pumping at 31.40 litres/minute, the water level in a test well at a distance of 80 m is lowered by 0.5 m and in a well 20 m away water is lowered by 1.0 m. The transmissibility of the aquifer, is (A) 1.185 m2 /minute(B) 1.285 m2/minute (C) 1.385 m2/minute (D) 1.485 m2/minute

Description : A well penetrates to 30 m below the static water table. After 24 hours of pumping at 31.40 litres/minute, the water level in a test well at a distance of 80 m is lowered by 0.5 m and in a well 20 m away water is ... 1.185 m2 /minute (B) 1.285 m2 /minute (C) 1.385 m2 /minute (D) 1.485 m2 /minute

Last Answer : Answer: Option C

The maximum deflection of (A) A simply supported beam carrying a uniformly increasing load from either end and having the apex at the mid span is WL3 /60EI (B) A fixed ended beam carrying a distributed load over the span is WL3 /384EI (C) A fixed ended beam carrying a concentrated load at the mid span is WL3 /192EI (D) All the above

Description : The maximum deflection of  (A) A simply supported beam carrying a uniformly increasing load from either end and having  the apex at the mid span is WL3 /60EI (B) A fixed ended beam ... ended beam carrying a concentrated load at the mid span is WL3 /192EI (D) All the above 

Last Answer : (D) All the above 

A cantilever is a beam whose (a) Both ends are supported either on rollers or hinges (b) One end is fixed and other end is free (c) Both ends are fixed (d) Whose both or one of the end has overhang

Description : A cantilever is a beam whose (a) Both ends are supported either on rollers or hinges (b) One end is fixed and other end is free (c) Both ends are fixed (d) Whose both or one of the end has overhang

Last Answer : b) One end is fixed and other end is free

Acceleration of a rocket having mass 5000 kg and resultant force acting on it is 200,000 N is A. 50 m s-2 B. 56 m s-2 C. 70 m s-2 D. 40 m s-2

Description : Acceleration of a rocket having mass 5000 kg and resultant force acting on it is 200,000 N is A. 50 m s-2 B. 56 m s-2 C. 70 m s-2 D. 40 m s-2

Last Answer : . 40 m s-2

Determine natural frequency of a system, which has equivalent spring stiffness of 43200 N/m and mass of 12 kg. A 40.22 rad/sec B 40 Hz C 60 Hz D 60 rad/sec

Description : Determine natural frequency of a system, which has equivalent spring stiffness of 43200 N/m and mass of 12 kg. A 40.22 rad/sec B 40 Hz C 60 Hz D 60 rad/sec

Last Answer : D 60 rad/sec

A gun barrel of mass 600 Kg has a recoil spring of stiffness 294 KN/m. If the barrel recoils 1.3 m on firing, what will be the initial recoil velocity of the barrel? (A) 28.77 m/s (B) 32.77 m/s (C) 35.77 m/s (D) 40.77 m/s

Description : A gun barrel of mass 600 Kg has a recoil spring of stiffness 294 KN/m. If the barrel recoils 1.3 m on firing, what will be the initial recoil velocity of the barrel? (A) 28.77 m/s (B) 32.77 m/s (C) 35.77 m/s (D) 40.77 m/s

Last Answer : (A) 28.77 m/s

A shaft 9 m long is subjected to a torque 30 t-m at a point 3 m distant from either end. The reactive torque at the nearer end will be (A) 5 tonnes metre (B) 10 tonnes metre (C) 15 tonnes metre (D) 20 tonnes metre

Description : A shaft 9 m long is subjected to a torque 30 t-m at a point 3 m distant from either end. The reactive torque at the nearer end will be (A) 5 tonnes metre (B) 10 tonnes metre (C) 15 tonnes metre (D) 20 tonnes metre

Last Answer : (D) 20 tonnes metre

In Joule's experiment, an insulated container contains 20 kg of waterinitially at 25°C. It is stirred by an agitator, which is made to turn by aslowly falling body weighing 40 kg through a height of 4 m. The process isrepeated 500 times. The acceleration due to gravity is 9.8 ms-2. Neglectingthe heat capacity of agitator, the temperature of water (in °C) is(A) 40.5(B) 34.4(C) 26.8(D) 25

Description : In Joule's experiment, an insulated container contains 20 kg of waterinitially at 25°C. It is stirred by an agitator, which is made to turn by a slowly falling body weighing 40 kg through a height of 4 m. The process is repeated ... temperature of water (in °C) is (A) 40.5 (B) 34.4 (C) 26.8 (D) 25

Last Answer : (B) 34.4

If the width of a pavement slab is 7.5 m, thickness 20 cm and working stress 1400 kg/cm2 , spacing of 10 mm tie bars for the longitudinal joint, is (A) 10 cm (B) 20 cm (C) 30 cm (D) 40 cm

Description : If the width of a pavement slab is 7.5 m, thickness 20 cm and working stress 1400 kg/cm2 , spacing of 10 mm tie bars for the longitudinal joint, is (A) 10 cm (B) 20 cm (C) 30 cm (D) 40 cm

Last Answer : Answer: Option C

A steel bar 20 mm in diameter simply-supported at its ends over a total span of 40 cm carries a load at its centre. If the maximum stress induced in the bar is limited to N/mm2, the bending strain energy stored in the bar, is (A) 411 N mm (B) 511 N mm (C) 611 N mm (D) 711 N mm

Description : A steel bar 20 mm in diameter simply-supported at its ends over a total span of 40 cm carries a  load at its centre. If the maximum stress induced in the bar is limited to N/mm2, the bending  strain energy stored in the ... (A) 411 N mm  (B) 511 N mm  (C) 611 N mm  (D) 711 N mm 

Last Answer : (C) 611 N mm 

A cantilever shaft having 50 mm diameter and length of 300 mm has a disc of mass 100 kg at its free enD. The Young’s modulus for the shaft material is 200 GN/m 2 . Calculate the natural longitudinal frequency in Hz. A. 575B. 625 C. 525 D. 550

Description : A cantilever shaft having 50 mm diameter and length of 300 mm has a disc of mass 100 kg at its free enD. The Young’s modulus for the shaft material is 200 GN/m 2 . Calculate the natural longitudinal frequency in Hz. A. 575B. 625 C. 525 D. 550

Last Answer : A. 575

A cantilever shaft having 50 mm diameter and a length of 300 mm has a disc of mass 100 kg at its free end. The Young’s modulus for the shaft material is 200 GN/m 2 . Determine the frequency of transverse vibrations of the shaft. a) 31 b) 35 c) 37 d) 41

Description : A cantilever shaft having 50 mm diameter and a length of 300 mm has a disc of mass 100 kg at its free end. The Young’s modulus for the shaft material is 200 GN/m 2 . Determine the frequency of transverse vibrations of the shaft. a) 31 b) 35 c) 37 d) 41

Last Answer : d) 41

A cantilever shaft having 50 mm diameter and length of 300 mm has a disc of mass 100 kg at its free end. The Young’s modulus for the shaft material is 200 GN/m 2 . Calculate the natural longitudinal frequency in Hz. a) 575 b) 625 c) 525 d) 550

Description : A cantilever shaft having 50 mm diameter and length of 300 mm has a disc of mass 100 kg at its free end. The Young’s modulus for the shaft material is 200 GN/m 2 . Calculate the natural longitudinal frequency in Hz. a) 575 b) 625 c) 525 d) 550

Last Answer : a) 575

Certain force acting on a 20 Kg mass changes its velocity from 5 m/s to 2 m/s. Calculate the work done by the force ? -Physics 9th

Description : Certain force acting on a 20 Kg mass changes its velocity from 5 m/s to 2 m/s. Calculate the work done by the force ? -Physics 9th

Last Answer : Certain force acting on 20 kg mass changes its velocity from 5 m s-1 to 2 m s-1. Calculate the work done by the force. (E k)2 = (1 )/2x 20 — (2)2 = 40 J.

Mass of Earth when it's radius is 6400 km and gravitational field strength is 9.81 N kg-1 is A. 6.0 × 1024 kg B. 5 × 1023 kg C. 40 × 109 kg D. 9 × 1024 kg

Description : Mass of Earth when it's radius is 6400 km and gravitational field strength is 9.81 N kg-1 is A. 6.0 × 1024 kg B. 5 × 1023 kg C. 40 × 109 kg D. 9 × 1024 kg

Last Answer : 5 × 1023 kg

While testing a cast iron beam (2.5 cm × 2.5 cm) in section and a metre long simply supported at the ends failed when a 100 kg weight is applied at the centre. The maximum stress induced is: (A) 960 kg/cm2 (B) 980 kg/cm2 (C) 1000 kg/cm2 (D) 1200 kg/cm2 Answer: Option

Description : While testing a cast iron beam (2.5 cm × 2.5 cm) in section and a metre long simply supported at  the ends failed when a 100 kg weight is applied at the centre. The maximum stress induced is:  (A) 960 kg/cm2 (B) 980 kg/cm2 (C) 1000 kg/cm2 (D) 1200 kg/c

Last Answer : (A) 960 kg/cm

A mass of 1 kg is attached to two identical springs each with stiffness k = 20 kN/m as shown in the figure. Under frictionless condition, the natural frequency of the system in Hz is close to * 1 point (A) 32 (B) 23 (C) 16 (D) 11

Description : A mass of 1 kg is attached to two identical springs each with stiffness k = 20 kN/m as shown in the figure. Under frictionless condition, the natural frequency of the system in Hz is close to * 1 point (A) 32 (B) 23 (C) 16 (D) 11

Last Answer : (A) 32

Determine natural frequency of a system, which has equivalent spring stiffness of 30000 N/m and mass of 20 kg? A 12.32 Hz B 4.10 Hz C 6.16 HzD None of the above

Description : Determine natural frequency of a system, which has equivalent spring stiffness of 30000 N/m and mass of 20 kg? A 12.32 Hz B 4.10 Hz C 6.16 HzD None of the above

Last Answer : C 6.16 Hz

Determine natural frequency of a system, which has equivalent spring stiffness of 30000 N/m and mass of 20 kg? A. 12.32 Hz B. 4.10 Hz C. 6.16 Hz D. None of the above

Description : Determine natural frequency of a system, which has equivalent spring stiffness of 30000 N/m and mass of 20 kg? A. 12.32 Hz B. 4.10 Hz C. 6.16 Hz D. None of the above

Last Answer : C. 6.16 Hz

Determine natural frequency of a system, which has equivalent spring stiffness of 30000 N/m and mass of 20 kg? A) 12.32 Hz B) 4.10 Hz C) 6.16 Hz D) None of the above

Description : Determine natural frequency of a system, which has equivalent spring stiffness of 30000 N/m and mass of 20 kg? A) 12.32 Hz B) 4.10 Hz C) 6.16 Hz D) None of the above

Last Answer : C) 6.16 Hz

Determine natural frequency of a system, which has equivalent spring stiffness of 30000 N/m and mass of 20 kg? C ( A )12.32 Hz (B) 4.10 Hz ( C )6.16 Hz (D)None of the above

Description : Determine natural frequency of a system, which has equivalent spring stiffness of 30000 N/m and mass of 20 kg? C ( A )12.32 Hz (B) 4.10 Hz ( C )6.16 Hz (D)None of the above

Last Answer : ( C )6.16 Hz

Determine natural frequency of a system, which has equivalent spring stiffness of 30000 N/m mass of 20 kg? a. 12.32 Hz b. 4.10 Hz c. 6.16 Hz d. None of the above

Description : Determine natural frequency of a system, which has equivalent spring stiffness of 30000 N/m mass of 20 kg? a. 12.32 Hz b. 4.10 Hz c. 6.16 Hz d. None of the above

Last Answer : c. 6.16 Hz

Two masses, one of the 10kg and the other unknown, are placed on a scale in a region where g = 9.67 m/sec2 . The combined weight of these two masses is 174.06 N. Find the unknown mass in kg.  a. 20 kg  b. 19 kg  c. 18 kg  d. 17 kg formula: m=Fg k / g

Description : Two masses, one of the 10kg and the other unknown, are placed on a scale in a region where g = 9.67 m/sec2 . The combined weight of these two masses is 174.06 N. Find the unknown mass in kg.  a. 20 kg  b. 19 kg  c. 18 kg  d. 17 kg formula: m=Fg k / g

Last Answer : 18 kg

The section modulus of a rectangular light beam 25 metres long is 12.500 cm3 . The beam is simply supported at its ends and carries a longitudinal axial tensile load of 10 tonnes in addition to a point load of 4 tonnes at the centre. The maximum stress in the bottom most fibre at the mid span section, is (A) 13.33 kg/cm2 tensile (B) 13.33 kg/cm2 compressive (C) 26.67 kg/cm2 tensile (D) 26.67 kg/cm2 compressive

Description : The section modulus of a rectangular light beam 25 metres long is 12.500 cm3 . The beam is simply supported at its ends and carries a longitudinal axial tensile load of 10 tonnes in addition to a point load of ... 13.33 kg/cm2 compressive (C) 26.67 kg/cm2 tensile (D) 26.67 kg/cm2 compressive

Last Answer : (C) 26.67 kg/cm2 tensile

For treating the patient with congestive heart failure (CHF), which of the following dosages of dopamine is selected for its positive inotropic effects? (a) 2.0 mg/kg/min (b) 5–10 mg/kg/min (c) 10–20 mg/kg/min (d) 40 mg/kg/min (e) 40 mg/kg/min

Description : For treating the patient with congestive heart failure (CHF), which of the following dosages of dopamine is selected for its positive inotropic effects? (a) 2.0 mg/kg/min (b) 5–10 mg/kg/min (c) 10–20 mg/kg/min (d) 40 mg/kg/min (e) 40 mg/kg/min

Last Answer : Ans: B

The total and effective stresses at a depth of 5 m below the top level of water in a swimming pool are respectively (A) Zero and zero (B) 0.5 kg/cm² and zero (C) 0.5 kg/cm² and 0.5 kg/cm² (D) 1.0 kg/cm² and 0.5 kg/cm²

Description : The total and effective stresses at a depth of 5 m below the top level of water in a swimming pool are respectively (A) Zero and zero (B) 0.5 kg/cm² and zero (C) 0.5 kg/cm² and 0.5 kg/cm² (D) 1.0 kg/cm² and 0.5 kg/cm²

Last Answer : (B) 0.5 kg/cm² and zero

The total pressure on the surface of a vertical sluice gate 2 m x 1 m with its top 2 m surface being 0.5 m below the water level will be (A) 500 kg (B) 1000 kg (C) 1500 kg (D) 2000 kg

Description : The total pressure on the surface of a vertical sluice gate 2 m x 1 m with its top 2 m surface being 0.5 m below the water level will be (A) 500 kg (B) 1000 kg (C) 1500 kg (D) 2000 kg

Last Answer : Answer: Option D

If the atmospheric pressure on the surface of an oil tank (sp. gr. 0.8) is 0.2 kg/cm", the pressure at a depth of 50 m below the oil surface will be (A) 2 meters of water column (B) 3 meters of water column (C) 5 meters of water column (D) 6 meters of water Column

Description : If the atmospheric pressure on the surface of an oil tank (sp. gr. 0.8) is 0.2 kg/cm", the pressure at a depth of 50 m below the oil surface will be (A) 2 meters of water column (B) 3 meters of water column (C) 5 meters of water column (D) 6 meters of water Column

Last Answer : Answer: Option D

The pressure in the air space above an oil (sp. gr. 0.8) surface in a tank is 0.1 kg/cm". The pressure at 2.5 m below the oil surface will be (A) 2 metres of water column (B) 3 metres of water column (C) 3.5 metres of water column (D) 4 m of water column

Description : The pressure in the air space above an oil (sp. gr. 0.8) surface in a tank is 0.1 kg/cm". The pressure at 2.5 m below the oil surface will be (A) 2 metres of water column (B) 3 metres of water column (C) 3.5 metres of water column (D) 4 m of water column

Last Answer : Answer: Option B

A crate weighing 40 kg rests on a cart moving with an acceleration W. The coefficient of friction between the cart and the crate is a.2.45 m/sec2 b.4.00 m/sec2 c.0.25 m/sec2 d.4.16 m/sec2 e.1.25 m/sec2

Description : A crate weighing 40 kg rests on a cart moving with an acceleration W. The coefficient of friction between the cart and the crate is a.2.45 m/sec2 b.4.00 m/sec2 c.0.25 m/sec2 d.4.16 m/sec2 e.1.25 m/sec2

Last Answer : a. 2.45 m/sec2

A standard steel tape of length 30 m and cross-section 15 × 1.0 mm was standardised at 25°C and at 30 kg pull. While measuring a base line at the same temperature, the pull applied was 40 kg. If the modulus of elasticity of steel tape is 2.2 × 106 kg/cm2 , the correction to be applied is (A) - 0.000909 m (B) + 0.0909 m (C) 0.000909 m (D) None of these

Description : A standard steel tape of length 30 m and cross-section 15 1.0 mm was standardised at 25°C and at 30 kg pull. While measuring a base line at the same temperature, the pull applied was 40 kg. If the modulus of elasticity of ... (A) - 0.000909 m (B) + 0.0909 m (C) 0.000909 m (D) None of these

Last Answer : (A) - 0.000909 m

A simply supported beam carries uniformly distributed load of 20 kN/m over the length of 5 m. If flexural rigidity is 30000 kN.m2, what is the maximum deflection in the beam? a. 5.4 mm b. 1.08 mm c. 6.2 mm d. 8.6 mm

Description : A simply supported beam carries uniformly distributed load of 20 kN/m over the length of 5 m. If flexural rigidity is 30000 kN.m2, what is the maximum deflection in the beam? a. 5.4 mm b. 1.08 mm c. 6.2 mm d. 8.6 mm

Last Answer : a. 5.4 mm