The sill of a common wooden partition is (A) Vertical wooden member on either end (B) Lower horizontal wooden member (C) Upper horizontal wooden member (D) Intermediate horizontal wooden member

The sill of a common wooden partition is
(A) Vertical wooden member on either end
(B) Lower horizontal wooden member
(C) Upper horizontal wooden member
(D) Intermediate horizontal wooden member
by

1 Answer

Answer :

Answer: Option B
by

Related questions

Nogging of a common wooden partition is (A) Upper horizontal wooden member (B) Lower horizontal wooden member (C) Intermediate horizontal wooden member (D) Vertical wooden member

Description : Nogging of a common wooden partition is (A) Upper horizontal wooden member (B) Lower horizontal wooden member (C) Intermediate horizontal wooden member (D) Vertical wooden member

Last Answer : Answer: Option C

Stud(s) of a common wooden partition (A) Are vertical wooden members (B) Is the upper horizontal wooden member (C) Is the lower horizontal wooden member (D) Are the intermediate horizontal wooden members

Description : Stud(s) of a common wooden partition (A) Are vertical wooden members (B) Is the upper horizontal wooden member (C) Is the lower horizontal wooden member (D) Are the intermediate horizontal wooden members

Last Answer : Answer: Option A

The upper surface of a weir over which water flows is known is (A) Crest (B) Nappy (C) Sill (D) Weir top

Description : The upper surface of a weir over which water flows is known is (A) Crest (B) Nappy (C) Sill (D) Weir top

Last Answer : Answer: Option C

For a beam having fixed ends, the unknown element of the reactions, is (A) Horizontal components at either end (B) Vertical components at either end (C) Horizontal component at one end and vertical component at the other (D) Horizontal and vertical components at both the ends

Description : For a beam having fixed ends, the unknown element of the reactions, is  (A) Horizontal components at either end  (B) Vertical components at either end  (C) Horizontal component at one end and vertical component at the other  (D) Horizontal and vertical components at both the ends 

Last Answer : (D) Horizontal and vertical components at both the ends 

The incisal guidance on the articulator is the:** A. Mechanical equivalent of horizontal and vertical overlap of upper and lower incisors B. Mechanical equivalent of the compensating curve C. Same as condylar guidance D. Estimated by the equation: Incisal guidance = 1/8 of condylar guidance

Description : The incisal guidance on the articulator is the:** A. Mechanical equivalent of horizontal and vertical overlap of upper and lower incisors B. Mechanical equivalent of the compensating curve C. Same as condylar guidance D. Estimated by the equation: Incisal guidance = 1/8 of condylar guidance

Last Answer : A. Mechanical equivalent of horizontal and vertical overlap of upper and lower incisors

Horizontal construction joints in concrete walls are generally provided at (A) Soffit level (B) Window sill level (C) Floor level (D) All the above

Description : Horizontal construction joints in concrete walls are generally provided at (A) Soffit level (B) Window sill level (C) Floor level (D) All the above

Last Answer : Answer: Option D

Brick nogging type of partition wall, is constructed by (A) Laying bricks as stretchers in cement mortar (B) Laying bricks as headers in cement mortar (C) Reinforcing brick wall with iron straps (D) Constructing brick work within a wooden framework

Description : Brick nogging type of partition wall, is constructed by (A) Laying bricks as stretchers in cement mortar (B) Laying bricks as headers in cement mortar (C) Reinforcing brick wall with iron straps (D) Constructing brick work within a wooden framework

Last Answer : Answer: Option D

In a square beam loaded longitudinally, shear develops (A) On middle fibre along horizontal plane (B) On lower fibre along horizontal plane (C) On top fibre along vertical plane (D) Equally on each fibre along horizontal plane

Description : In a square beam loaded longitudinally, shear develops (A) On middle fibre along horizontal plane (B) On lower fibre along horizontal plane (C) On top fibre along vertical plane (D) Equally on each fibre along horizontal plane

Last Answer : (D) Equally on each fibre along horizontal plane (D) Equally on each fibre along horizontal plane

.In an X ray the mesio buccal root of upper first molars is elongated because of: A. Mesio angular horizontal B. Too big vertical angulation C. Too small vertical angulation D. High angulation

Description : .In an X ray the mesio buccal root of upper first molars is elongated because of: A. Mesio angular horizontal B. Too big vertical angulation C. Too small vertical angulation D. High angulation

Last Answer : C. Too small vertical angulation

On the ladder resting on the ground and leaning against a smooth vertical wall, the force of friction will be (A) Downwards at its upper end (B) Upwards at its upper end (C) Perpendicular to the wall at its upper end (D) Zero at its upper end

Description : On the ladder resting on the ground and leaning against a smooth vertical wall, the force of  friction will be  (A) Downwards at its upper end  (B) Upwards at its upper end  (C) Perpendicular to the wall at its upper end  (D) Zero at its upper end 

Last Answer : (D) Zero at its upper end 

On a ladder resting on smooth ground and leaning against vertical wall, the force of friction will be (A) Towards the wall at its upper end (B) Away from the wall at its upper end (C) Upwards at its upper end (D) Downwards at its upper end

Description : On a ladder resting on smooth ground and leaning against vertical wall, the force of friction will be (A) Towards the wall at its upper end (B) Away from the wall at its upper end (C) Upwards at its upper end (D) Downwards at its upper end

Last Answer : (C) Upwards at its upper end

In a theodolite the line passing through the intersection of the horizontal and vertical cross hairs and the optical centre of the object glass and its continuation, is known as (a) Horizontal axis (b) Vertical axis (c) Line of collination (d) Line of sight (e) Either of c or d above*

Description : In a theodolite the line passing through the intersection of the horizontal and vertical cross hairs and the optical centre of the object glass and its continuation, is known as (a) Horizontal axis (b) Vertical axis (c) Line of collination (d) Line of sight (e) Either of c or d above*

Last Answer : e) Either of c or d above*

With regard to the lacrimal drainage system: a. the upper lacrimal punctum is lateral to the lower punctum b. the lacrimal canaliculi are lined by stratified squamous epithelium c. nasolacrimal duct is narrowest at the lowest end d. nasolacrimal duct runs downwards, lateral and forwards to the anterior part of inferior meatus e. congenital blockage is due mainly to delay development of common canaliculus

Description : With regard to the lacrimal drainage system: a. the upper lacrimal punctum is lateral to the lower punctum b. the lacrimal canaliculi are lined by stratified squamous epithelium c. ... part of inferior meatus e. congenital blockage is due mainly to delay development of common canaliculus

Last Answer : the upper lacrimal punctum is lateral to the lower punctum

In a bar of large length when held vertically and subjected to a load at its lower end, its own￾weight produces additional stress. The maximum stress will be (A) At the lower cross-section (B) At the built-in upper cross-section (C) At the central cross-section (D) At every point of the bar

Description : In a bar of large length when held vertically and subjected to a load at its lower end, its own￾weight produces additional stress. The maximum stress will be (A) At the lower cross-section (B) At the built-in upper cross-section (C) At the central cross-section (D) At every point of the bar

Last Answer : (B) At the built-in upper cross-section

A 2 m long wooden plank of mass 20 kg is pivoted (supported from below) at 0.5 m from either end. A person of mass 40 kg

Description : A 2 m long wooden plank of mass 20 kg is pivoted (supported from below) at 0.5 m from either end. A person of mass 40 kg

Last Answer : A 2 m long wooden plank of mass 20 kg is pivoted (supported from below) at 0.5 m from ... How far can the person walk before the plank topples?

If the PM belonged to the upper House of Parliament? (1) He will not be able to vote in his favour in the event of a no-confidence motion. (2) He will not be able to speak on the budget in the Lower House. (3) He can make statements only in the Upper House. (4) He has to become a member of the Lower House within six months after swearing in as the PM.

Description : If the PM belonged to the upper House of Parliament? (1) He will not be able to vote in his favour in the event of a no-confidence motion. (2) He will not be able to speak on the budget in the ... House. (4) He has to become a member of the Lower House within six months after swearing in as the PM.

Last Answer : (1) He will not be able to vote in his favour in the event of a noconfidence motion Explanation: He will not be able to vote in his favour in the event of a no-confidence motion.

09. According to Bazin, the coefficient of discharge varies with the height of water over the sill of a weir. A) Correct B) Incorrect

Description : 09. According to Bazin, the coefficient of discharge varies with the height of water over the sill of a weir. A) Correct B) Incorrect

Last Answer : A

The top of the weir over which the water flows is known as (A) Sill or crest (B) Nappe or vein (C) Orifice (D) None of these

Description : The top of the weir over which the water flows is known as (A) Sill or crest (B) Nappe or vein (C) Orifice (D) None of these

Last Answer : Answer: Option A

The discharge over a rectangular notch is (where b = Width of notch, and H = Height of liquid, above the sill of the notch) (A) (2/3) Cd × b × gH) (B) (2/3) Cd × b × g) × H (C) (2/3) Cd × b × g) × H 3/2 (D) (2/3) Cd × b × g) × H

Description : The discharge over a rectangular notch is (where b = Width of notch, and H = Height of liquid, above the sill of the notch) (A) (2/3) Cd × b × gH) (B) (2/3) Cd × b × g) × H (C) (2/3) Cd × b × g) × H 3/2 (D) (2/3) Cd × b × g) × H

Last Answer : Answer: Option C

4 The sheet of water flowing over a notch or a weir is known as (A) Sill or crest (B) Nappe or vein (C) Orifice (D) None of thes

Description : 4 The sheet of water flowing over a notch or a weir is known as (A) Sill or crest (B) Nappe or vein (C) Orifice (D) None of thes

Last Answer : Answer: Option B

The length of a liquid stream while flowing over a weir __________ at the ends of the sill. (A) Expands (B) Does not change (C) Contracts (D) None of these

Description : The length of a liquid stream while flowing over a weir __________ at the ends of the sill. (A) Expands (B) Does not change (C) Contracts (D) None of these

Last Answer : Answer: Option C

The projections of head or sill of a door or window frame are (A) Transoms (B) Horns (C) Stops (D) Chock

Description : The projections of head or sill of a door or window frame are (A) Transoms (B) Horns (C) Stops (D) Chock

Last Answer : Answer: Option B

A depth-discharge relationship of the canal section is maintained at a notch fall because the sill of the notches is : a) Level with downstream canal bed b) Below the upstream canal bed c) Level with upstream canal bed d) Above the upstream canal bed

Description : A depth-discharge relationship of the canal section is maintained at a notch fall because the sill of the notches is : a) Level with downstream canal bed b) Below the upstream canal bed c) Level with upstream canal bed d) Above the upstream canal bed

Last Answer : c) Level with upstream canal bed

The absolute percentage error in the computed discharge over a rectangular weir corresponding to an absolute error of 1.5 % in the measurement of head over the sill of the weir would be : (a) 1.5 (b) 2.25 (c) 2.5 (d) 3.75

Description : The absolute percentage error in the computed discharge over a rectangular weir corresponding to an absolute error of 1.5 % in the measurement of head over the sill of the weir would be : (a) 1.5 (b) 2.25 (c) 2.5 (d) 3.75

Last Answer : (b) 2.25

Pick out the wrong statement. (A) The condensing film co-efficient is about 3 times lower for vertical condenser as compared to the equivalent horizontal condenser for identical situation (B) Film co-efficient for vaporisation decreases as a result of vapor binding (C) In industrial practice, sub-cooling of condensate is required, when thecondensate is a volatile liquid and is to be transferred for storage(D) Overall heat transfer co-efficient in a heat exchanger is controlled by thevalue of the film co-efficient, which is higher

Description : Pick out the wrong statement. (A) The condensing film co-efficient is about 3 times lower for vertical condenser as compared to the equivalent horizontal condenser for identical situation ( ... in a heat exchanger is controlled by the value of the film co-efficient, which is higher

Last Answer : (D) Overall heat transfer co-efficient in a heat exchanger is controlled by the value of the film co-efficient, which is higher

The vertical flow of communication from lower level to one or more higher levels is _____________. (a) Upward communication ; (b) Downward communication ; (c) Formal Communication (d) Horizontal communication

Description : The vertical flow of communication from lower level to one or more higher levels is _____________. (a) Upward communication ; (b) Downward communication ; (c) Formal Communication (d) Horizontal communication 

Last Answer : (a) Upward communication ; 

Pick up the correct statement from the following: (A) A pile is a slender member which transfers the load through its lower end on a strong strata (B) A pile is a slender member which transfers its load to the surrounding soil (C) A pile is a slender member which transfers its load by friction (D) A pile is a cylindrical body of concrete which transfers the load at a depth greater than its width

Description : Pick up the correct statement from the following: (A) A pile is a slender member which transfers the load through its lower end on a strong strata (B) A pile is a slender member which ... A pile is a cylindrical body of concrete which transfers the load at a depth greater than its width

Last Answer : Answer: Option B

A square surface 3 m × 3 m lies in a vertical line in water pipe its upper edge at water surface. The hydrostatic force on square surface is (A) 9,000 kg (B) 13,500 kg (C) 18,000 kg (D) 27,000 kg

Description : A square surface 3 m × 3 m lies in a vertical line in water pipe its upper edge at water surface. The hydrostatic force on square surface is (A) 9,000 kg (B) 13,500 kg (C) 18,000 kg (D) 27,000 kg

Last Answer : Answer: Option B

A beam is called fixed beam if end slopes remain a. horizontal b.vertical c.inclined d.parabolic

Description : A beam is called fixed beam if end slopes remain a. horizontal b.vertical c.inclined d.parabolic

Last Answer : a. horizontal

In periodontitis, the most common finding is, (Main feature of suprabony pocket) A. Horizontal bone resorption B. Vertical bone resorption C. Angular bone loss

Description : In periodontitis, the most common finding is, (Main feature of suprabony pocket) A. Horizontal bone resorption B. Vertical bone resorption C. Angular bone loss

Last Answer : A. Horizontal bone resorption

While rotating the theodolite in the horizontal plane, the bubble of the bubble tube takes up the same position in its tube, it indicates (A) The rotation axis is vertical (B) The trunnion axis is horizontal (C) The line of collimation is perpendicular to vertical axis (D) None of the above

Description : While rotating the theodolite in the horizontal plane, the bubble of the bubble tube takes up the  same position in its tube, it indicates  (A) The rotation axis is vertical  (B) The trunnion ... (C) The line of collimation is perpendicular to vertical axis  (D) None of the above

Last Answer : (A) The rotation axis is vertical

The diaphragm of a stadia theodolite is fitted with two additional (A) Horizontal hairs (B) Vertical hairs (C) Horizontal and two vertical hairs (D) None of these

Description : The diaphragm of a stadia theodolite is fitted with two additional (A) Horizontal hairs (B) Vertical hairs (C) Horizontal and two vertical hairs (D) None of these

Last Answer : (A) Horizontal hairs

If the intercept on a vertical staff is observed as 0.75 m from a tachometer, the horizontal distance between tachometer and staff (A) 7.5 m (B) 25 m (C) 50 m (D) 75 m

Description : If the intercept on a vertical staff is observed as 0.75 m from a tachometer, the horizontal distance between tachometer and staff (A) 7.5 m (B) 25 m (C) 50 m (D) 75 m

Last Answer : (D) 75 m

In a perfect prismatic compass (A) Magnetic axis and geometric axis of the needle coincide (B) Ends of the needle and pivot are in same vertical and horizontal planes (C) Pivot is vertically over the centre of the graduated circle (D) All the above

Description : In a perfect prismatic compass (A) Magnetic axis and geometric axis of the needle coincide (B) Ends of the needle and pivot are in same vertical and horizontal planes (C) Pivot is vertically over the centre of the graduated circle (D) All the above

Last Answer : (D) All the above

The instrument which is used in plane tabling for obtaining horizontal and vertical distances directly without resorting to chaining, is known as (A) Plane alidade (B) Telescopic alidade (C) Clinometer (D) Tacheometer

Description : The instrument which is used in plane tabling for obtaining horizontal and vertical distances directly without resorting to chaining, is known as (A) Plane alidade (B) Telescopic alidade (C) Clinometer (D) Tacheometer

Last Answer : (B) Telescopic alidade

The branch of surveying in which both horizontal and vertical positions of a point, are determined by making instrumental observations, is known (A) Tacheometry (B) Tachemetry (C) Telemetry (D) All the above

Description : The branch of surveying in which both horizontal and vertical positions of a point, are determined by making instrumental observations, is known (A) Tacheometry (B) Tachemetry (C) Telemetry (D) All the above

Last Answer : (D) All the above

The constant vertical distance between two adjacent contours, is called (A) Horizontal interval (B) Horizontal equivalent (C) Vertical equivalent (D) Contour interval

Description : The constant vertical distance between two adjacent contours, is called (A) Horizontal interval (B) Horizontal equivalent (C) Vertical equivalent (D) Contour interval

Last Answer : (D) Contour interval

The vertical angle between longitudinal axis of a freely suspended magnetic needle and a horizontal line at its pivot, is known (A) Declination (B) Azimuth (C) Dip (D) Bearing

Description : The vertical angle between longitudinal axis of a freely suspended magnetic needle and a horizontal line at its pivot, is known (A) Declination (B) Azimuth (C) Dip (D) Bearing

Last Answer : (C) Dip

The line of sight is kept as high above ground surface as possible to minimise the error in the observed angles due to (A) Shimmering (B) Horizontal refraction (C) Vertical refraction (D) Both shimmering and horizontal refraction

Description : The line of sight is kept as high above ground surface as possible to minimise the error in the observed angles due to (A) Shimmering (B) Horizontal refraction (C) Vertical refraction (D) Both shimmering and horizontal refraction

Last Answer : (D) Both shimmering and horizontal refraction

The line normal to the plumb line is known as (A) Horizontal line (B) Level line (C) Datum line (D) Vertical line

Description : The line normal to the plumb line is known as (A) Horizontal line (B) Level line (C) Datum line (D) Vertical line

Last Answer : (B) Level line

In direct method of contouring, the process of locating or identifying points lying on a contour is called (A) Ranging (B) Centring (C) Horizontal control (D) Vertical control

Description : In direct method of contouring, the process of locating or identifying points lying on a contour is called (A) Ranging (B) Centring (C) Horizontal control (D) Vertical control

Last Answer : (D) Vertical control

Contour interval is (A) The vertical distance between two consecutive contours (B) The horizontal distance between two consecutive contours (C) The vertical distance between two points on same contour (D) The horizontal distance between two points on same contour

Description : Contour interval is (A) The vertical distance between two consecutive contours (B) The horizontal distance between two consecutive contours (C) The vertical distance between two points on same contour (D) The horizontal distance between two points on same contour

Last Answer : (A) The vertical distance between two consecutive contours

Reactions at the supports of a structure can be determined by equating the algebraic sum of (A) Horizontal forces to zero (B) Vertical forces to zero (C) Moment about any point to zero (D) All the above

Description : Reactions at the supports of a structure can be determined by equating the algebraic sum of (A) Horizontal forces to zero (B) Vertical forces to zero (C) Moment about any point to zero (D) All the above

Last Answer : (D) All the above

A projectile is fired at an angle to the vertical. Its horizontal range will be maximum when is (A) 0° (B) 30° (C) 45° (D) 60°

Description : A projectile is fired at an angle to the vertical. Its horizontal range will be maximum when is (A) 0° (B) 30° (C) 45° (D) 60°

Last Answer : (C) 45°

In the triaxial compression test, the application of additional axial stress (i.e. deviator stress) on the soil specimen produces shear stress on (A) Horizontal plane only (B) Vertical plane only (C) Both horizontal and vertical planes (D) All planes except horizontal and vertical planes

Description : In the triaxial compression test, the application of additional axial stress (i.e. deviator stress) on the soil specimen produces shear stress on (A) Horizontal plane only (B) Vertical plane only (C) Both horizontal and vertical planes (D) All planes except horizontal and vertical planes

Last Answer : (D) All planes except horizontal and vertical planes

In non-cohesive soil in passive state of plastic equilibrium (A) Major principal stress is horizontal (B) Minor principal stress is vertical (C) Major principal stress is vertical (D) Minor and major principal stresses are equally inclined to the horizontal

Description : In non-cohesive soil in passive state of plastic equilibrium (A) Major principal stress is horizontal (B) Minor principal stress is vertical (C) Major principal stress is vertical (D) Minor and major principal stresses are equally inclined to the horizontal

Last Answer : (B) Minor principal stress is vertical

A retaining wall 6m high supports a backfill with a surcharge angle of 10°. The back of the wall is inclined to the vertical at a positive batter angle of 5°. If the angle of wall friction is 7°, then the resultant active earth pressure will act at a distance of 2 m above the base and inclined to the horizontal at an angle of (A) 7° (B) 10° (C) 12° (D) 17

Description : A retaining wall 6m high supports a backfill with a surcharge angle of 10°. The back of the wall is inclined to the vertical at a positive batter angle of 5°. If the angle of wall friction is 7°, then the resultant ... inclined to the horizontal at an angle of (A) 7° (B) 10° (C) 12° (D) 17

Last Answer : (C) 12°

If a cohesive soil specimen is subjected to a vertical compressive load, the inclination of the cracks to the horizontal is (A) 90° (B) 45° (C) 22.5° (D) 0

Description : If a cohesive soil specimen is subjected to a vertical compressive load, the inclination of the cracks to the horizontal is (A) 90° (B) 45° (C) 22.5° (D) 0

Last Answer : (B) 45°

A failure wedge develops if a retaining wall (A) Moves away from the backfill (B) Moves towards the backfill (C) Sinks downwards (D) Stresses equally by vertical and horizontal forces

Description : A failure wedge develops if a retaining wall (A) Moves away from the backfill (B) Moves towards the backfill (C) Sinks downwards (D) Stresses equally by vertical and horizontal forces

Last Answer : Answer: Option A

A cylindrical specimen of saturated soil failed under an axial vertical stress of 100kN/m² when it was laterally unconfmed. The failure plane was inclined to the horizontal plane at an angle of 45°. The values of cohesion and angle of internal friction for the soil are respectively (A) 0.5 N/mm² and 30° (B) 0.05 N/mm² and 0° (C) 0.2 N/mm² and 0° (D) 0.05 N/mm² and 45°

Description : A cylindrical specimen of saturated soil failed under an axial vertical stress of 100kN/m² when it was laterally unconfmed. The failure plane was inclined to the horizontal plane at an angle of 45°. The values of cohesion and angle of ... N/mm² and 0° (C) 0.2 N/mm² and 0° (D) 0.05 N/mm² and 45°

Last Answer : Answer: Option B