# The yearly load duration curve of a power plant is a straight line...

The yearly load duration curve of a power plant is a straight line. The maximum load is 750 MW and the minimum load is 600 Mw. The capacity of the plant is 900 MW. What is the capacity factor and utilization factor?

0.75, 0.83 is the capacity factor and utilization factor.

## Related questions

Description : The load duration curve for unity load factor will be of  (1) Rectangular shape (2) Triangular shape (3) L -shape (4) I -shape

Description : m and n are monsoon duration factor and catchment factor respectively. If P is yearly rainfall in  cm, runoff can be calculated by  (A) Velocity area method  (B) Weir or spillway method  (C) Use of venturi-meter  (D) Using power plant consumption

Last Answer : (A) Velocity area method

Description : Write short note on load duration curve?

Last Answer : When the load elements of a load curve are arranged in the order of descending magnitudes, the curve thus obtained is called load duration curve. The load curve is obtained from the same data as ... the values of load factor and diversity factor, lower will be the overall cost per unit generated.

Description : Explain with diagram load duration curve.

Last Answer : It is drawn from load curve. It is graph of load (MW/KW) arranged in descending order of magnitude with respect to time.

Description : A 60 Hz, 320 km lossless line has Bending end voltage 1.0 p.u, The receiving end voltage on no load is?

Last Answer : A 60 Hz, 320 km lossless line has Bending end voltage 1.0 p.u, The receiving end voltage on no load is 1.088 p.u.

Description : Average yearly load on the tractor should not exceed its rated load up to a) 70% b) 72% c) 75 % d) 78%

Last Answer : c) 75 %

Description : A generating station has a maximum demand of 50 Mw, a load factor of 60%, a plant capacity factor of 45% and if the plant while running as per schedule, were fully loaded. The daily energy produced will be

Last Answer : A generating station has a maximum demand of 50 Mw, a load factor of 60%, a plant capacity factor of 45% and if the plant while running as per schedule, were fully loaded. The daily energy produced will be 720 MW.

Description : A 3-phase 11 kV generator feeds power to a constant power unity power factor load of 100 MW through a 3-phase transmission line. The line-to line voltage at the terminals of the machine is maintained constant at 11 kV. The per ... 11 kV is  (A) 100 MVAR (B) 10.1 MVAR (C) -100 MVAR (D) -10.1 MVAR

Last Answer : A 3-phase 11 kV generator feeds power to a constant power unity power factor load of 100 MW through a 3-phase transmission line. The line-to line voltage at the terminals of the machine is maintained ... load to increase the line-to-line voltage at the load terminals to 11 kV is -10.1 MVAR

Description : At an industrial sub-station with a 4 MW load, a capacitor of 2 MVAR is installed to maintain the load power factor at 0.97 lagging. If the capacitor goes out of service, the load power factor becomes (A) 0.85 (B) 1.00 (C) 0.80 lag (D) 0.90 lag

Last Answer : At an industrial sub-station with a 4 MW load, a capacitor of 2 MVAR is installed to maintain the load power factor at 0.97 lagging. If the capacitor goes out of service, the load power factor becomes  0.80 lag

Description : If the reference bus is changed in two load flow runs with same system data and power obtained for reference bus taken as specified P and Q in the latter run, the system losses  A) Will be ... C) As well as complex bus voltage will changed D) As well as complex bus voltage will be unchanged

Last Answer : If the reference bus is changed in two load flow runs with same system data and power obtained for reference bus taken as specified P and Q in the latter run, the system losses Will be unchanged but complex bus voltages will change

Description : A transformer has negative voltage regulation when its load power factor is   (1) Zero (2) Unity (3) Leading (4) Lagging

Description : Generally in a power system network, the load is represented as a :  (A) Constant power in both load flow study and in stability study  (B) Constant power in load flow study and constant ... impedance in load flow study  (D) Constant impedance in both load flow study and in stability study

Last Answer : Generally in a power system network, the load is represented as a : Constant power in load flow study and constant impedance in stability study

Description : Load compensation in power systems is a process to :  (A) Maintain better voltage profile (B) Increase short circuit capacity of the system (C) Generate required harmonics for loads like arc furnaces (D) Compensate for the line reactance

Last Answer : Load compensation in power systems is a process to : Maintain better voltage profile

Description : Power station having Load factor = 70%, capacity factor = 50%, used factor = 60%, maximum demand = 20MW then annual energy production is  (1) 122.8 GWh (2) 198.55 GWh (3) 128.2 GWh (4) 188.82 GWh

Last Answer : Power station having Load factor = 70%, capacity factor = 50%, used factor = 60%, maximum demand = 20MW then annual energy production is 122.8 GWh

Description : A 3-phase, 11 kv, 50 Hz, 200 kW load has a power factor of 0.8 lag. A delta connected 3-phase capacitor is used to improve the power factor to unity. The capacitance perphase of the capacitor in micro-farads is?

Last Answer : A 3-phase, 11 kv, 50 Hz, 200 kW load has a power factor of 0.8 lag. A delta connected 3-phase capacitor is used to improve the power factor to unity. The capacitance perphase of the capacitor in micro-farads is 1.316.

Description : A power station supplies the peak load of 60 Mw, 40 MW and 70 MW to three localities. The annual load factor is 0.50 p.u. and the diversity factor of the load at the station is 1.55. The maximum demand on the station and average load respectively will be

Last Answer : A power station supplies the peak load of 60 Mw, 40 MW and 70 MW to three localities. The annual load factor is 0.50 p.u. and the diversity factor of the load at the station is 1.55. The maximum demand on the station and average load respectively will be 103.2 MW, 51.61 .

Description : If the supply curve is a straight line passing through the origin, then the price elasticity of supply will be - (1) less than unity (2) infinitely large (3) greater than unity (4) equal to unity

Last Answer : (4) equal to unity Explanation: Any straight line supply curve passing through the origin has an elasticity of supply equal to 1. The different types of price elasticity of supply are listed below:

Description : For which type of motion, the distance time graph is not a straight line and can be any kind of curve? (1) Uniform motion (2) Circular motion (3) Non-uniform motion (4) Linear motion

Last Answer : (3) Non-uniform motion Explanation: When the motion is uniform, the distance time graph is a straight line with a slope.When the motion is non-uniform, the distance time graph is not a straight line. It can be any kind of curve.

Description : Which of the following represents the plot of filtrate volume versus time for constant pressure filtration? (A) Parabola (B) Straight line (C) Hyperbola (D) Exponential curve

Description : The adiabatic saturation curve for a vapour-gas mixture is (A) Straight line (B) Slightly concave upward (C) Slightly concave downward (D) None of these

Last Answer : (B) Slightly concave upward

Description : Pick out the wrong statement: (A) Absorption factor is constant, when the equilibrium and operating lines are straight (B) In case of a stripper, the equilibrium curve is always below ... (D) In the absorption of low solubility gases, the liquid film is the controlling resistance

Last Answer : (B) In case of a stripper, the equilibrium curve is always below the operating line

Description : Graph of p against 1⁄V is A. curve B. straight line C. parabola D. hyperbola

Description : Graph of potential energy against distance is A. curve B. parabolic C. hyperbolic D. straight line

Description : An indifference curve is always A.A vertical straight line B.Convex to the origin C.Concave to the origin D.A horizontal straight line

Last Answer : B.Convex to the origin

Description : Growth of population can be conveniently represented by (A) An arithmetical curve (B) A semi-logarithmic curve (C) A logistic curve (D) A straight line curve

Last Answer : (C) A logistic curve

Description : The population growth curve is  (A) S-shaped curve  (B) Parabolic curve  (C) Circular curve  (D) Straight line

Last Answer : (A) S-shaped curve

Description : Isotherm on an enthalpy-concentration diagram, for an ideal solution will be a (A) Straight line (B) Sine curve (C) Parabola (D) Hyperbola

Last Answer : (A) Straight line

Description : Distribution of shear intensity over a rectangular section of a beam, follows: (A) A circular curve (B) A straight line (C) A parabolic curve (D) An elliptical curve

Description : The shear stress-strain graph for a Newtonian fluid is a (A) Straight line (B) Parabolic curve (C) Hyperbolic curve (D) Elliptical

Description : In one dimensional flow, the flow (A) Is steady and uniform (B) Takes place in straight line (C) Takes place in curve (D) Takes place in one direction

Description : Pick up the correct statement from the following: (A) Continuous grading is not necessary for obtaining a minimum of air voids (B) The omission of a certain size of aggregate is shown by ... in concrete increases the workability but also increases the liability to segregation (D) All the above

Description : Increase-strain curve of concrete is (a) A perfect straight line upto failure (b) Straight line up to 0.002% strain value and then parabolic upto failure (c) Nearly parabolic up to 0.002% strain ... line upto failure (d) Hyperbolic up to 0.002% strain value and then a straight line upto failure

Last Answer : (c) Nearly parabolic up to 0.002% strain value and the a straight line upto failure

Description : In a reinforced concrete beam , the shear stress distribution above the neutral axis following a (a) A straight line (b) Circular curve (c) Parabolic curve (d) All the above

Last Answer : (c) Parabolic curve

Description : The stress-strain curve concrete in compression follows [ A ] a straight line [ B ] a rectangular parabolic curve [ C ] a semi circular arc [ D ] a cubic parabola

Last Answer : [ B ] a rectangular parabolic curve

Description : The stress-strain curve concrete in compression follows [ A ] a straight line [ B ] a rectangular parabolic curve [ C ] a semi circular arc [ D ] a cubic parabola

Last Answer : [ B ] a rectangular parabolic curve

Description : Which of the following statement is true (a) Monopolist are price takers ; (b) Monopoly firm earn abnormal profits; (c) A Monopoly firm faces straight demand line ; (d) Supply curve of a monopoly firm is positive sloped

Last Answer : (a) Monopolist are price takers ;

Description : Long run supply curve of a decreasing cost industry is (a) Downward sloping curve ; (b) Upward sloping curve; (c) Straight line parallel to X axis ; (d) Straight line parallel to y axis

Last Answer : (a) Downward sloping curve ;

Description : If the supply curve is a straight line passing through the origin, then the price elasticity of supply will be (1) less than unity (2) infinitely large (3) greater than unity (4) equal to unity

Last Answer : equal to unity

Description : Exponential phase of growth curve of bacteria is of limited duration because of A.rise in cell density B.accumulation of toxic metabolites C.exhaustion of nutrients D.all of these

Last Answer : D.all of these

Description : Exponential phase of growth curve of bacteria is of limited duration because of A.rise in cell density B.accumulation of toxic metabolites C.exhaustion of nutrients D.all of these

Last Answer : D.all of these

Description : Draw and explain integrated duration curve used in system operation.

Last Answer : Diagram of integrated duration curve used in system operation: Explanation:  Integrated duration curve is obtained from load duration curve. It is drawn in between load on Y-axis in KW/MW and the X- ... a particular time of a day can also be shown on a curve which is called as mass curve.

Description : An 800 kV transmission line has a maximum power transfer capacity of P. If it is operated at 400 kV with the series reactance unchanged, the new maximum power transfer capacity is approximately (A) P (B) 2P (C) P / 2 (D) P / 4

Last Answer : An 800 kV transmission line has a maximum power transfer capacity of P. If it is operated at 400 kV with the series reactance unchanged, the new maximum power transfer capacity is approximately P / 4

Description : For enhancing the power transmission in along EHV transmission line, the most preferred method is to connect a  (A) Series inductive compensator in the line (B) Shunt inductive compensator at the ... (C) Series capacitive compensator in the line (D) Shunt capacitive compensator at the sending end

Last Answer : For enhancing the power transmission in along EHV transmission line, the most preferred method is to connect a Series capacitive compensator in the line

Description : For a fixed value of complex power flow in a transmission line having a sending and voltage V, the real power loss will be proportional to  A) V B) v2 C) 1/V2 D)1/V

Last Answer : For a fixed value of complex power flow in a transmission line having a sending and voltage V, the real power loss will be proportional to 1/V2

Description : For a 500 Hz frequency excitation, a 50 km long power line will be modeled as

Last Answer : For a 500 Hz frequency excitation, a 50 km long power line will be modeled as long line

Description : The transmission line feeding power on either side of the main transmission line is called?

Last Answer : The transmission line feeding power on either side of the main transmission line is called Secondary transmission.

Description : For a transmission line with negligible losses, the lagging reactive power (VAR) delivered at The receiving end, for a given receiving end voltage, is directly proportional to the?

Last Answer : For a transmission line with negligible losses, the lagging reactive power (VAR) delivered at The receiving end, for a given receiving end voltage, is directly proportional to the line voltage drop.

Description : If a voltage-controlled bus is treated as load bus, then which one of the following limits would be violated?   (a) Active power (b) Reactive power (c) Voltage (d) Phase angle

Last Answer : If a voltage-controlled bus is treated as load bus, then which one of the following limits would be violated?   (a) Active power (b) Reactive power (c) Voltage (d) Phase angle

Description : In load flow Study, a PV bus is treated as a PQ bus when

Last Answer : Voltage at the bus becomes high

Description : Load factor is the  (1) Ratio of maximum load on the station to sum of consumer's maximum load.  (2) Ratio of average demand to maximum demand.  (3) Factor used for increasing load.  (4) Reciprocal of (1).

Last Answer : Load factor is the Ratio of average demand to maximum demand.