Pick out the wrong statement: (A) Absorption factor is constant, when the equilibrium and operating lines are straight (B) In case of a stripper, the equilibrium curve is always below the operating line (C) In case of an absorber, the operating line is always above the equilibrium curve (D) In the absorption of low solubility gases, the liquid film is the controlling resistance

Pick out the wrong statement:

(A) Absorption factor is constant, when the equilibrium and operating lines

are straight

(B) In case of a stripper, the equilibrium curve is always below the operating

line

(C) In case of an absorber, the operating line is always above the equilibrium

curve

(D) In the absorption of low solubility gases, the liquid film is the controlling

resistance

by

1 Answer

Answer :

(B) In case of a stripper, the equilibrium curve is always below the operating

line


by

Related questions

Pick out the wrong statement. (A) The operating line always lies above the equilibrium solubility curve in case of a single component absorber (B) The operating line always lies below the equilibrium solubility curve in case of a single component stripper (C) The operating pressure in solvent extraction system should be below vapor pressures of all components (D) The solubility of a particular gas in ideal solution in any solvent is always the same

Description : Pick out the wrong statement. (A) The operating line always lies above the equilibrium solubility curve in case of a single component absorber (B) The operating line always lies below the equilibrium ... (D) The solubility of a particular gas in ideal solution in any solvent is always the same

Last Answer : (C) The operating pressure in solvent extraction system should be below vapor pressures of all components

In case of a desorber (stripper), the (A) Operating line always lies above the equilibrium curve (B) Operating line always lies below the equilibrium curve

Description : In case of a desorber (stripper), the (A) Operating line always lies above the equilibrium curve (B) Operating line always lies below the equilibrium curve

Last Answer : (B) Operating line always lies below the equilibrium curve

Pick out the wrong statement (A) Co-current absorbers are usually used, when the gas to be dissolved in the liquid is a pure substance (B) In case of gas absorption, HETP is equal to HTU, when both the operating line & the equilibrium lines are parallel (C) Hatta number is important in case of gas absorption with chemical reaction (D) In actual practice, absorption is an endothermic process, while stripping is an exothermic process

Description : Pick out the wrong statement (A) Co-current absorbers are usually used, when the gas to be dissolved in the liquid is a pure substance (B) In case of gas absorption, HETP is ... reaction (D) In actual practice, absorption is an endothermic process, while stripping is an exothermic process

Last Answer : (D) In actual practice, absorption is an endothermic process, while stripping is an exothermic process

Pick out the wrong statement. (A) The controlling resistance in case of heating of air by condensing steam is in the air film (B) The log mean temperature difference (LMTD) for counter flow and parallel flow can be theoretically same when any one of the fluids (hot or cold fluid) passes through the heat exchanger at constant temperature (C) In case of a 1 - 2 shell and tube heat exchanger, the LMTD correction factor value increases sharply, when a temperature cross occurs (D) Phase change in case of a pure fluid at a given pressure from liquid to vapor or vice-versa occurs at saturation temperature

Description : Pick out the wrong statement. (A) The controlling resistance in case of heating of air by condensing steam is in the air film (B) The log mean temperature difference (LMTD) for ... a pure fluid at a given pressure from liquid to vapor or vice-versa occurs at saturation temperature

Last Answer : (C) In case of a 1 - 2 shell and tube heat exchanger, the LMTD correction factor value increases sharply, when a temperature cross occurs

‘L/mG’ is the expression for (A) Absorption factor (B) Brinkman number (C) Slope of operating line in absorber (D) Slope of operating line in stripper

Description : ‘L/mG’ is the expression for (A) Absorption factor (B) Brinkman number (C) Slope of operating line in absorber (D) Slope of operating line in stripper

Last Answer : (A) Absorption factor

In case of an absorber, the operating (A) Line always lies above the equilibrium curve (B) Line always lies below the equilibrium curve (C) Line can be either above or below the equilibrium curve (D) Velocity is more than the loading velocity

Description : In case of an absorber, the operating (A) Line always lies above the equilibrium curve (B) Line always lies below the equilibrium curve (C) Line can be either above or below the equilibrium curve (D) Velocity is more than the loading velocity

Last Answer : (A) Line always lies above the equilibrium curve

For stripping of a gas in a counter current stripper, the operating line (A) Lies above the equilibrium curve (B) Lies below the equilibrium curve (C) Can lie above or below the equilibrium curve (D) Is always parallel to the equilibrium curve

Description : For stripping of a gas in a counter current stripper, the operating line (A) Lies above the equilibrium curve (B) Lies below the equilibrium curve (C) Can lie above or below the equilibrium curve (D) Is always parallel to the equilibrium curve

Last Answer : (C) Can lie above or below the equilibrium curve

The minimum liquid rate to be used in an absorber corresponds to an operating line (A) Of slope = 1 (B) Of slope = 0.1 (C) Tangential to the equilibrium curve (D) None of these

Description : The minimum liquid rate to be used in an absorber corresponds to an operating line (A) Of slope = 1 (B) Of slope = 0.1 (C) Tangential to the equilibrium curve (D) None of these

Last Answer : (C) Tangential to the equilibrium curve

Pick out the wrong statement. (A) At constant pressure, solubility of a gas in a liquid diminishes with rise in temperature (B) Normally, the gases which are easily liquefied are more soluble in common solvents (C) The gases which are capable of forming ions in aqueous solution are much more soluble in water than in other solvents (D) At constant pressure, solubility of a gas in a liquid increases with rise in temperature

Description : Pick out the wrong statement. (A) At constant pressure, solubility of a gas in a liquid diminishes with rise in temperature (B) Normally, the gases which are easily liquefied are more soluble ... (D) At constant pressure, solubility of a gas in a liquid increases with rise in temperature

Last Answer : (A) At constant pressure, solubility of a gas in a liquid diminishes with rise in temperature

Absorption accompanied by heat evolution results in (A) Increased capacity of the absorber (B) Increase in equilibrium solubility (C) Decrease in equilibrium solubility (D) None of these

Description : Absorption accompanied by heat evolution results in (A) Increased capacity of the absorber (B) Increase in equilibrium solubility (C) Decrease in equilibrium solubility (D) None of these

Last Answer : (C) Decrease in equilibrium solubility

Absorption factor method is used to calculate the number of ideal stages, when (A) Operating line lies above the equilibrium line (B) Operating line lies below the equilibrium line (C) Both operating and equilibrium lines are parallel (D) Pressure drop in the column is very high

Description : Absorption factor method is used to calculate the number of ideal stages, when (A) Operating line lies above the equilibrium line (B) Operating line lies below the equilibrium line (C) Both operating and equilibrium lines are parallel (D) Pressure drop in the column is very high

Last Answer : (C) Both operating and equilibrium lines are parallel

In case of absorption, both the operating and equilibrium lines will be straight for (A) Isothermal operation (B) Dilute solutions (C) Dilute solutions and isothermal operation (D) None of these

Description : In case of absorption, both the operating and equilibrium lines will be straight for (A) Isothermal operation (B) Dilute solutions (C) Dilute solutions and isothermal operation (D) None of these

Last Answer : (C) Dilute solutions and isothermal operation

In a packed absorption tower, if the equilibrium and operating lines are both straight lines, then the ratio, HETP/HTUOG __________ the absorption factor. (A) Increases with increase in (B) Is one at unity value of (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : In a packed absorption tower, if the equilibrium and operating lines are both straight lines, then the ratio, HETP/HTUOG __________ the absorption factor. (A) Increases with increase in (B) Is one at unity value of (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

The individual mass transfer co-efficients (moles/m2s) for absorption of a solute from a gas mixture into a liquid solvent are, KL = 4.5 and KG = 1.5. The slope of the equilibrium line is 3. Which of the following resistance (s) is (are) controlling? (A) Liquid side (B) Gas side (C) Interfacial (D) Both liquid and gas side

Description : The individual mass transfer co-efficients (moles/m2s) for absorption of a solute from a gas mixture into a liquid solvent are, KL = 4.5 and KG = 1.5. The slope of the equilibrium line is 3. Which of ... A) Liquid side (B) Gas side (C) Interfacial (D) Both liquid and gas side

Last Answer : (B) Gas side

For an absorber, both equilibrium and operating line will be straight for (A) Concentrated solution and non-isothermal operation (B) Dilute solution and non-isothermal operation (C) Dilute solution and isothermal operation (D) Concentrated solution and isothermal operation

Description : For an absorber, both equilibrium and operating line will be straight for (A) Concentrated solution and non-isothermal operation (B) Dilute solution and non-isothermal operation (C) Dilute solution and isothermal operation (D) Concentrated solution and isothermal operation

Last Answer : (C) Dilute solution and isothermal operation

Pick out the wrong statement. (A) Mechanical agitation is required, if the system has low interfacial tension (B) Sieve tray towers are generally used for systems having low interfacial tension (C) When Henry's law constant is very small, then the mass transfer rate is controlled by the gas film resistance (D) Taylor-Prandtl analogy for heat and mass transfer considers the transfer through both laminar and turbulent layers

Description : Pick out the wrong statement. (A) Mechanical agitation is required, if the system has low interfacial tension (B) Sieve tray towers are generally used for systems having low ... Prandtl analogy for heat and mass transfer considers the transfer through both laminar and turbulent layers

Last Answer : (A) Mechanical agitation is required, if the system has low interfacial tension

Pick out the wrong statement. (A) In solvent extraction, the distribution co-efficient should be as large as possible for solvent economy (B) With increase in pressure, the solubility of gases in solvent increases at a fixed temperature (C) Decrease in Murphree plate efficiency is an indication of entrainment in distillation column (D) The capacity of a distillation column is maximum at total reflux

Description : Pick out the wrong statement. (A) In solvent extraction, the distribution co-efficient should be as large as possible for solvent economy (B) With increase in pressure, the solubility of ... in distillation column (D) The capacity of a distillation column is maximum at total reflux

Last Answer : (D) The capacity of a distillation column is maximum at total reflux

Separation of a mixture of two gases by absorption in the liquid solvent depends upon the difference in their (A) Viscosity (B) Density (C) Solubility (D) Relative volatility

Description : Separation of a mixture of two gases by absorption in the liquid solvent depends upon the difference in their (A) Viscosity (B) Density (C) Solubility (D) Relative volatility

Last Answer : (C) Solubility

If G = insoluble gas in gas stream and L = non-volatile solvent in liquid stream, then the slope of the operating line for the absorber is (A) L/G (B) G/L (C) Always < 1 (D) None of these

Description : If G = insoluble gas in gas stream and L = non-volatile solvent in liquid stream, then the slope of the operating line for the absorber is (A) L/G (B) G/L (C) Always < 1 (D) None of these

Last Answer : (A) L/G

Pick out the wrong statement: (A) Change in barometric pressure does not affect the relative humidity (B) In case of a packed tower, the operating velocity is about half of the flooding velocity, generally (C) 'Elution' means the desorption of the adsorbed solute by a solvent (D) The equilibrium moisture content of the solid can be reduced by increasing the absolute humidity

Description : Pick out the wrong statement: (A) Change in barometric pressure does not affect the relative humidity (B) In case of a packed tower, the operating velocity is about half of the ... (D) The equilibrium moisture content of the solid can be reduced by increasing the absolute humidity

Last Answer : (D) The equilibrium moisture content of the solid can be reduced by increasing the absolute humidity

Pick out the wrong statement. (A) Different solids have different equilibrium moisture curves (B) Total condenser or reboiler is considered equivalent to one theoretical plate in McCabe-Thiele method of theoretical plate calculation for distillation column (C) Heat removal load on cooler remains constant, even with increase of the reflux ratio in a distillation column (D) Even a forced draft cooling tower cannot cool water below the wet bulb temperature

Description : Pick out the wrong statement. (A) Different solids have different equilibrium moisture curves (B) Total condenser or reboiler is considered equivalent to one theoretical plate in McCabe-Thiele method of ... (D) Even a forced draft cooling tower cannot cool water below the wet bulb temperature

Last Answer : (C) Heat removal load on cooler remains constant, even with increase of the reflux ratio in a distillation column

H2S is being absorbed in a gas absorber unit. The height of the transfer unit based on the overall mass transfer coefficient on the gas side is 0.4 m. The equilibrium data is given by, y = 1.5 x. The bulk concentration of H2S has to be reduced from 0.05 to 0.001 mole fraction in the gas side. The height of the tower (in metres) corresponding to an operating line given by, y = 5x + 0.001 is (A) 2.0 (B) 1.56 (C) 1.0

Description : H2S is being absorbed in a gas absorber unit. The height of the transfer unit based on the overall mass transfer coefficient on the gas side is 0.4 m. The equilibrium data is given by, y = 1.5 x. The bulk concentration of H2S ... by, y = 5x + 0.001 is (A) 2.0 (B) 1.56 (C) 1.0

Last Answer : (A) 2.0

In case of absorption & stripping, the interface of the liquid & gas phases are present in equilibrium, when the diffusional resistance of __________ is zero. (A) Interface (B) Gas phase (C) Liquid phase (D) All 'a', 'b' & 'c'

Description : In case of absorption & stripping, the interface of the liquid & gas phases are present in equilibrium, when the diffusional resistance of __________ is zero. (A) Interface (B) Gas phase (C) Liquid phase (D) All 'a', 'b' & 'c'

Last Answer : (A) Interface

For a single component absorber, the operating line is straight only when plotted in term of __________ units. (A) Partial pressure (B) Mole ratio (C) Mole fraction (D) None of these

Description : For a single component absorber, the operating line is straight only when plotted in term of __________ units. (A) Partial pressure (B) Mole ratio (C) Mole fraction (D) None of these

Last Answer : (B) Mole ratio

Pick out the wrong statement. (A) Linear polymers are formed from bifunctional groups only and are normally thermoplastic (B) Cross-linked branched chain polymers are either elastometric or thermosetting (C) Branching in case of cross-linked polymers caused by small amount of impurities in bifunctional monomer formulation reduces its solubility and increases the softening point (D) Dibasic acids reacts with dihydric alcohols to give polyesters using addition polymerisation reaction

Description : Pick out the wrong statement. (A) Linear polymers are formed from bifunctional groups only and are normally thermoplastic (B) Cross-linked branched chain polymers are either elastometric or ... (D) Dibasic acids reacts with dihydric alcohols to give polyesters using addition polymerisation reaction

Last Answer : D) Dibasic acids reacts with dihydric alcohols to give polyesters using addition polymerisation reaction

Pick out the wrong statement. (A) A particular chemical reaction is more temperature sensitive at low temperatures (B) A very high value of equilibrium constant, K (K >> 1) indicates that the reaction is practically irreversible in nature (C) The intercept of the Arrhenius plot is called the 'activation energy' (D) Non-ideal flow takes place in reactors due to recycling, channeling or by creation of stagnant regions

Description : Pick out the wrong statement. (A) A particular chemical reaction is more temperature sensitive at low temperatures (B) A very high value of equilibrium constant, K (K >> 1) indicates that the ... ) Non-ideal flow takes place in reactors due to recycling, channeling or by creation of stagnant regions

Last Answer : (C) The intercept of the Arrhenius plot is called the 'activation energy

Pick out the correct statement. (A) A chemical reaction accompanied by absorption of heat is called an exothermic reaction (B) A chemical reaction accompanied by evolution of heat is called an endothermic reaction (C) The rate constant for a first order reaction does not change on changing the concentration units (D) Chemical equilibrium state is dynamic in nature

Description : Pick out the correct statement. (A) A chemical reaction accompanied by absorption of heat is called an exothermic reaction (B) A chemical reaction accompanied by evolution of heat is called an ... does not change on changing the concentration units (D) Chemical equilibrium state is dynamic in nature

Last Answer : (C) The rate constant for a first order reaction does not change on changing the concentration units

Pick out the wrong statement regarding the solubility characteristics of high polymers. (A) Greater the degree of cross-linking in the polymer, lesser is its solubility (B) Polymers having more aliphatic character are more soluble in aliphatic solvents, while those polymers having more aromatic character are more soluble in aromatic solvents (C) Swelling tendency or solubility of polymers in a particular solvent decreases with increase in molecular weight of the solvent (D) High molecular weight polymers on dissolving gives solution of very low viscosity

Description : Pick out the wrong statement regarding the solubility characteristics of high polymers. (A) Greater the degree of cross-linking in the polymer, lesser is its solubility (B) Polymers having more ... of the solvent (D) High molecular weight polymers on dissolving gives solution of very low viscosity

Last Answer : (D) High molecular weight polymers on dissolving gives solution of very low viscosity

. The absorption factor is defined as (where, L = liquid flow rate, G = gas flow rate and, m = slope of the equilibrium line). (A) L/mG (B) G/mL (C) mL/G (D) LG/m

Description : . The absorption factor is defined as (where, L = liquid flow rate, G = gas flow rate and, m = slope of the equilibrium line). (A) L/mG (B) G/mL (C) mL/G (D) LG/m

Last Answer : (A) L/mG

HETP is numerically equal to HTU, only when the operating line (A) Lies below the equilibrium line (B) Lies above the equilibrium line (C) And equilibrium lines are parallel (D) Is far from the equilibrium line

Description : HETP is numerically equal to HTU, only when the operating line (A) Lies below the equilibrium line (B) Lies above the equilibrium line (C) And equilibrium lines are parallel (D) Is far from the equilibrium line

Last Answer : (C) And equilibrium lines are parallel

Pick out the correct statement. (A) Higher hold up of the solid in the rotary dryer results in better exposure of the solids to the gas (B) The 'Hatta number' is important in problems involving gas absorption without chemical reaction (C) For a non-reacting binary mixture of ideal gases, the partial pressure distribution of both components is linear in the case of steady state equimolal counter-diffusion (D) Total reflux in case of distillation operation requires infinite number of plates for a binary system separation

Description : Pick out the correct statement. (A) Higher hold up of the solid in the rotary dryer results in better exposure of the solids to the gas (B) The 'Hatta number' is ... reflux in case of distillation operation requires infinite number of plates for a binary system separation

Last Answer : (C) For a non-reacting binary mixture of ideal gases, the partial pressure distribution of both components is linear in the case of steady state equimolal counter-diffusion

Pick out the wrong statement. (A) Superheated steam is preferably not used for process heating because of its low heat transfer film co-efficient (B) In a shell and tube heat exchanger, the shell pressure drop is maximum for orifice baffles (C) S.I. unit of fouling factor is Watt/m2 .°K (D) Longitudinal fins are used in extended surface heat exchangers, when the direction of fluid flow is parallel to the axis of the tube

Description : Pick out the wrong statement. (A) Superheated steam is preferably not used for process heating because of its low heat transfer film co-efficient (B) In a shell and tube heat exchanger ... surface heat exchangers, when the direction of fluid flow is parallel to the axis of the tube

Last Answer : (C) S.I. unit of fouling factor is Watt/m2 .°K

Pick out the correct statement. (A) The slope of the stripping line is always less than unity (B) For a given separation in a binary distillation column, with increase in reflux ratio (above the minimum reflux ratio), the fixed cost of the distillation column first increases and then decreases (C) In Ponchon-Savarit method of no. of theoretical plate determination, the stripping and rectifying operating lines are vertical at total reflux (D) Kremser-Brown-Souder's equation is used to calculate the efficiency of a plate tower

Description : Pick out the correct statement. (A) The slope of the stripping line is always less than unity (B) For a given separation in a binary distillation column, with increase in reflux ratio ( ... (D) Kremser-Brown-Souder's equation is used to calculate the efficiency of a plate tower

Last Answer : C) In Ponchon-Savarit method of no. of theoretical plate determination, the stripping and rectifying operating lines are vertical at total reflux

In a packed tower, the value of HETP equals HTUOG, when the equilibrium and the operating lines are (where, HETP = height equivalent to a theoretical plate HTUOG = overall gas phase height of a transfer unit). (A) Straight (B) Parallel (C) Both (A) & (B) (D) Neither (A) nor (B

Description : In a packed tower, the value of HETP equals HTUOG, when the equilibrium and the operating lines are (where, HETP = height equivalent to a theoretical plate HTUOG = overall gas phase height of a transfer unit). (A) Straight (B) Parallel (C) Both (A) & (B) (D) Neither (A) nor (B

Last Answer : (C) Both (A) & (B)

If the overall efficiency and Murphree plate efficiency are equal, then both the equilibrium and operating lines are: (A) Straight (B) Parallel (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : If the overall efficiency and Murphree plate efficiency are equal, then both the equilibrium and operating lines are: (A) Straight (B) Parallel (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Pick out the wrong statement: (A) Greater is the kinematic viscosity of the liquid, greater is the thickness of the boundary layer (B) Blowers develop a maximum pressure of 2 atmospheres (C) Friction losses in pipe fittings are generally expressed in terms of velocity heads (D) Fanning friction factor in case of turbulent flow of liquids in pipe depends upon relative roughness & Reynolds number

Description : Pick out the wrong statement: (A) Greater is the kinematic viscosity of the liquid, greater is the thickness of the boundary layer (B) Blowers develop a maximum pressure of 2 atmospheres ( ... factor in case of turbulent flow of liquids in pipe depends upon relative roughness & Reynolds number

Last Answer : (C) Friction losses in pipe fittings are generally expressed in terms of velocity heads

Pick out the wrong statement (A) A horizontal line on the humidity chart indicates the temperature changes at constant molal humidity (B) When water is cooled from 80 to 70°C by exposure to the air with a wet bulb temperature of 60°C, then both the approach & the range would be 10°C (C) For unsaturated air-water vapor mixture at atmospheric conditions, the wet bulb temperature & adiabatic cooling lines are the same (D) Relative saturation of unsaturated mixture of water vapor & air cannot be increased by either reducing the mixture temperature or by increasing the total pressure

Description : Pick out the wrong statement (A) A horizontal line on the humidity chart indicates the temperature changes at constant molal humidity (B) When water is cooled from 80 to 70°C by exposure ... & air cannot be increased by either reducing the mixture temperature or by increasing the total pressure

Last Answer : (D) Relative saturation of unsaturated mixture of water vapor & air cannot be increased by either reducing the mixture temperature or by increasing the total pressure

Pick out the wrong statement. (A) Surface tension of a substance vanishes at critical point, as there is no distinction between liquid and vapour phases at its critical point (B) Entropy of a system decreases with the evolution of heat (C) Change of internal energy is negative for exothermic reactions (D) The eccentric factor for all materials is always more than one

Description : Pick out the wrong statement. (A) Surface tension of a substance vanishes at critical point, as there is no distinction between liquid and vapour phases at its critical point (B) Entropy of ... is negative for exothermic reactions (D) The eccentric factor for all materials is always more than one

Last Answer : (D) The eccentric factor for all materials is always more than one

Desirable value of absorption factor in an absorber is (A) 1 (B) < 1 (C) > 1 (D) 0.5

Description : Desirable value of absorption factor in an absorber is (A) 1 (B) < 1 (C) > 1 (D) 0.5

Last Answer : (C) > 1

Pick out the wrong statement. (A) The conversion for a gas phase reaction increases with decrease in pressure, if there is an increase in volume accompanying the reaction (B) With increase in temperature, the equilibrium constant increases for an exothermic reaction (C) The equilibrium constant of a reaction depends upon temperature only (D) The conversion for a gas phase reaction increases with increase in pressure, if there is a decrease in volume accompanying the reaction

Description : Pick out the wrong statement. (A) The conversion for a gas phase reaction increases with decrease in pressure, if there is an increase in volume accompanying the reaction (B) With ... phase reaction increases with increase in pressure, if there is a decrease in volume accompanying the reaction

Last Answer : (B) With increase in temperature, the equilibrium constant increases for an exothermic reaction

Absorption (liquid-gas system) with evolution of heat as compared to isothermal absorption results in (A) Decreased solute solubility (B) Large minimum liquid to gas (L/G) ratio (C) Large number of trays(D) All (A), (B) and (C)

Description : Absorption (liquid-gas system) with evolution of heat as compared to isothermal absorption results in (A) Decreased solute solubility (B) Large minimum liquid to gas (L/G) ratio (C) Large number of trays (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Pick out the wrong statement. (A) The mole fraction of solute is directly proportional to the molality of a 'dilute' solution (B) For a non-reacting binary mixture of ideal gases, the partial pressure distribution of both components is nonlinear in the case of steady state unimolal unidirectional diffusion (C) Azeotropes obey Raoult's law at all temperature (D) The relative volatility of a binary mixture at the Azeotropic composition is 1

Description : Pick out the wrong statement. (A) The mole fraction of solute is directly proportional to the molality of a 'dilute' solution (B) For a non-reacting binary mixture of ideal gases, the partial ... at all temperature (D) The relative volatility of a binary mixture at the Azeotropic composition is 1

Last Answer : (C) Azeotropes obey Raoult's law at all temperature

Pick out the wrong statement. (A) Activity co-efficient is dimensionless. (B) In case of an ideal gas, the fugacity is equal to its pressure. (C) In a mixture of ideal gases, the fugacity of a component is equal to the partial pressure of the component. (D) The fugacity co-efficient is zero for an ideal gas

Description : Pick out the wrong statement. (A) Activity co-efficient is dimensionless. (B) In case of an ideal gas, the fugacity is equal to its pressure. (C) In a mixture of ideal gases, the fugacity of ... equal to the partial pressure of the component. (D) The fugacity co-efficient is zero for an ideal gas

Last Answer : (D) The fugacity co-efficient is zero for an ideal gas

Pick out the wrong statement. (A) The condensing film co-efficient is about 3 times lower for vertical condenser as compared to the equivalent horizontal condenser for identical situation (B) Film co-efficient for vaporisation decreases as a result of vapor binding (C) In industrial practice, sub-cooling of condensate is required, when thecondensate is a volatile liquid and is to be transferred for storage(D) Overall heat transfer co-efficient in a heat exchanger is controlled by thevalue of the film co-efficient, which is higher

Description : Pick out the wrong statement. (A) The condensing film co-efficient is about 3 times lower for vertical condenser as compared to the equivalent horizontal condenser for identical situation ( ... in a heat exchanger is controlled by the value of the film co-efficient, which is higher

Last Answer : (D) Overall heat transfer co-efficient in a heat exchanger is controlled by the value of the film co-efficient, which is higher

Pick out the wrong statement about nucleate boiling. (A) Bubble generation is by expansion of entrapped gas/vapour at small cavities in the surface (B) Surface temperature is greater than the saturation temperature of the liquid (C) Heat transfer from the surface of the liquid is less than that in film boiling (D) The temperature is less than that of film boiling

Description : Pick out the wrong statement about nucleate boiling. (A) Bubble generation is by expansion of entrapped gas/vapour at small cavities in the surface (B) Surface temperature is greater than the saturation ... less than that in film boiling (D) The temperature is less than that of film boiling

Last Answer : (D) The temperature is less than that of film boiling

Choose the wrong statement (A) The center of buoyancy is located at the center of gravity of the displaced liquid (B) For stability of a submerged body, the center of gravity of body must lie directly below the center of buoyancy (C) If C.G. and center of buoyancy coincide, the submerged body must lie at neutral equilibrium for all positions (D) All floating bodies are stable

Description : Choose the wrong statement (A) The center of buoyancy is located at the center of gravity of the displaced liquid (B) For stability of a submerged body, the center of gravity of body must ... the submerged body must lie at neutral equilibrium for all positions (D) All floating bodies are stable

Last Answer : Answer: Option D

For water-ethanol system, the minimum reflux ratio (A) Is computed from the slope of the upper operating line that is tangent to the equilibrium curve (B) Is computed from the intercept of the operating line (C) Cannot be computed (D) Is the optimum reflux ratio

Description : For water-ethanol system, the minimum reflux ratio (A) Is computed from the slope of the upper operating line that is tangent to the equilibrium curve (B) Is computed from the intercept of the operating line (C) Cannot be computed (D) Is the optimum reflux ratio

Last Answer : (A) Is computed from the slope of the upper operating line that is tangent to the equilibrium curve