Define filter. State its types. Draw any one filter with input and output waveform.

Define filter. State its types. Draw any one filter with input and output waveform.
by

1 Answer

Answer :

Defination : Filter is a circuit which remove or filtered out the AC component (ripple)

Types of filter

1. Shunt Capacitor filter (C filter)

2. Series Inductor filter (L filter)

3. LC filter

4. filter (CLC filter)

Shunt Capacitor filter (C filter)

image


OR


Waveforms:

image

image

by

Related questions

Describe the operation of inductor with sinusoidal AC voltage as input. Draw waveform for voltage across and current through the inductor. Draw its phasor representation.

Description : Describe the operation of inductor with sinusoidal AC voltage as input. Draw waveform for voltage across and current through the inductor. Draw its phasor representation.

Last Answer : An alternating voltage is applied to a purely inductive coil, a back e.m.f. is produced due to self-inductance of the coil. The back e.m.f. at every step, opposes the rise of fall of current through the coil ... drop, the applied voltage has to overcome this self induced e.m.f. only.

Define RMS value and Average value of AC waveform.

Description : Define RMS value and Average value of AC waveform.

Last Answer : 1. RMS value:- For an alternating current, the RMS value is defined as that value of steady current (DC) which produces the same heat or power as is produced by the alternating current during the ... by averaging all the instantaneous values of its wave over a period of half cycle. Iav=0.637 Imax

Define the following with respect to BJT. (i) Input resistance (ii) Output resistance

Description : Define the following with respect to BJT. (i) Input resistance (ii) Output resistance

Last Answer : Input resistance: It is the ratio of small change in emitter -to-base voltage(∆VEB) to the resulting change in emitter current (∆IE) for a constant collector to base voltage(VCB) ... of BJT is ratio of voltage between output terminal and common terminal to current through output terminal. 

(i) Draw the time domain and frequency domain representation of sine wave and triangular wave. (ii) Define frequency and wavelength.

Description : (i) Draw the time domain and frequency domain representation of sine wave and triangular wave. (ii) Define frequency and wavelength.

Last Answer : (i)Time domain and frequency domain representation of sine wave time domain and frequency domain representation of triangular wave.   ii) Define frequency and wavelength. Frequency ... : Wavelength can be defined as the distance between two successive crests troughs of a wave. 

Draw the circuit diagram of bridge rectifier with π filter. Draw its input and output waveform.

Description : Draw the circuit diagram of bridge rectifier with π filter. Draw its input and output waveform. 

Last Answer : Circuit diagram of bridge rectifier with π filter : Input and output waveform:

State the need for filter circuits in power supply.

Description : State the need for filter circuits in power supply.

Last Answer : Ripple must be kept away from the load and it should be removed from the rectified output. Therefore , there is a necessity of filter circuit for removing i.e. smoothing or filtering the ripple and allowing the (pure or steady) d.c. voltage to reach the load.

Draw the construction of BJT (NPN) and explain its working principle. State and explain different operating regions.

Description : Draw the construction of BJT (NPN) and explain its working principle. State and explain different operating regions.

Last Answer : Construction of BJT (NPN): Working of NPN Transistor : The circuit diagram of the NPN transistor is shown in the figure below. The forward biased is applied across the emitter-base ... Zero with input current is Zero transistor in cut off. In this region transistor act as open switch

Draw and describe power triangle. State its significance.

Description : Draw and describe power triangle. State its significance.

Last Answer :  Power Triangle:   OR   Power Triangle is a right angled triangle whose sides represent the active, reactive and apparent power. It is obtained by multiplying the circuit current I ... loss due to different load. This is very important for designing the energy efficient electrical system. 

Draw the circuit diagram and describe the working principle of full wave bridge rectifier. Draw its waveforms.

Description : Draw the circuit diagram and describe the working principle of full wave bridge rectifier. Draw its waveforms. 

Last Answer : During the first half cycle : During the first half cycle of the input voltage, the upper end of the transformer secondary winding is positive with respect to the lower end. Thus during the first ... , terminal D, diode D4, and terminal A back to transformer and output will positive half cycle.

Draw the diagram of transistor operating regions

Description : Draw the diagram of transistor operating regions

Last Answer : diagram of transistor operating regions

State the different types of transformers. Describe the construction and general principle of transformer.

Description : State the different types of transformers. Describe the construction and general principle of transformer.

Last Answer : Different types of transformer are core type shell type Berry type Construction of transformer: OR Shell Type construction can be consider for diagram Transformer ... is based on the principle of mutual induction between two circuits linked by a common magnetic field. 

Define α. Give the relationship between α and β.

Description : Define α. Give the relationship between α and β.

Last Answer : Alpha (α )– It is ratio of collector current IC to emitter current IE of a transistor.

Define active components. Give two examples.

Description : Define active components. Give two examples. 

Last Answer : The component which requires power supply for its operation is called as Active component. e.g. Diode, Transistor, ICs, SCRs. OR Active Component: The component which rely on source of ... is called active component example diode , transistor, FET, and so on. They are semiconductor component

Define- (i) Current (ii) Potential difference

Description : Define- (i) Current (ii) Potential difference

Last Answer : i) Current :- electric current is defined as the movement of electronics or flow of electronics inside the conducting material. Unit-ampere(A)  ii) Potential Difference: The difference between the ... the electrical circuit is known as potential difference between those points. Unit:- volt (V) 

Define self induced Emf. Write equation of self induced Emf.

Description : Define self induced Emf. Write equation of self induced Emf. 

Last Answer : Definition: Self-induced emf is the e.m.f induced in the coil due to the change of flux produced by linking it with its own turns. Or Self induced emf is that which is induced in a coil, due to the change in its own current or flux. Self induced emf equation. E = - N (dΦ/dt) volts

Draw the circuit diagram of shunt capacitor filter along with full wave rectifier. Draw the waveform of full wave rectifier output and shunt capacitor filter output.

Description : Draw the circuit diagram of shunt capacitor filter along with full wave rectifier. Draw the waveform of full wave rectifier output and shunt capacitor filter output.

Last Answer : Fig: Shunt capacitor filter along with full wave rectifier Fig: Waveform of full wave rectifier output and shunt capacitor filter output.

State the condition for RC differentiator. Draw the output waveform of RC integrator for square wave input.

Description : State the condition for RC differentiator. Draw the output waveform of RC integrator for square wave input.

Last Answer : Condition for RC differentiator: If the time duration T of the input waveform is comparable with the RC time constant (product of R and C) then the output waveform of the differentiator gets distorted. Hence for proper differentiator the condition is as follows: T >>RC

Write the Emf equation of transformer. State the meaning of each term in it.

Description : Write the Emf equation of transformer. State the meaning of each term in it. 

Last Answer : EMF equation of Transformer:- E1 = 4.44 f ØmN1 OR E1 = 4.44 f BmAN1 E2 = 4.44 f ØmN2 OR E2 = 4.44 f Bm AN2 Let, E1 = Primary emf E2 = Secondary emf N1= Number of turns in the primary N2 ... flux in core (wb) Bm= Flux density (wb/m2 /Tesla) A= Area of cross section of core m2 F = Frequency 

State applications of single phase AC motors.

Description : State applications of single phase AC motors. 

Last Answer : Water pumps ceiling fan & air conditioners. lathe machine washing machines. Blowers Mixers & grinders Compressors Conveyers Refrigerators.

State Lenz’s law.

Description : State Lenz’s law.

Last Answer : Lenz’s Law: It states that the direction of electromagnetically induced emf is such that it always opposes the main cause of its production. Or It is expressed by equation E = - N (dΦ/dt) volts Where – sign indicate the direction EMF is induced opposite to rate of change of flux. 

Explain the working of Half wave rectifier with suitable diagram

Description : Explain the working of Half wave rectifier with suitable diagram

Last Answer : The half-wave rectifier circuit using a semiconductor diode (D) with a load resistance RL but no smoothing filter is given in the figure. The diode is connected in series with the secondary of the ... . Since only half-cycles of the input wave are used, it is called a half wave rectifier. 

Explain with neat diagram how transistor can be used as a switch.

Description : Explain with neat diagram how transistor can be used as a switch.

Last Answer : In Bipolar Transistor as a Switch the biasing of the transistor, either NPN or PNP is arranged to operate the transistor at both sides of the I-V characteristics curves. The areas ... possible and maximum current flowing through the transistor. Therefore the transistor is switched Fully-ON .

Explain Zener diode as voltage regulator.

Description : Explain Zener diode as voltage regulator. 

Last Answer : Zener Diodes can be used to produce a stabilised voltage output with low ripple under varying load current conditions. By passing a small current through the diode from a voltage source, via a ... across the load in spite of variations in the input voltage or changes in the load current. 

Explain the construction details of LED

Description : Explain the construction details of LED

Last Answer : The construction of LED differs from normal standard diode in many aspects. As shown in the figure the p-n junction of the LED bulb is enclosed by a transparent, hard plastic epoxy resin hemispherical- ... that much light. Due to this, the brightest light will be emitted at the top of the LED.

(i) Discuss ideal and practical voltage source (ii) Compare CB, CC and CE configuration

Description : (i) Discuss ideal and practical voltage source (ii) Compare CB, CC and CE configuration

Last Answer : (i) Discuss ideal and practical voltage source Ideal voltage source The ideal voltage source has a constant voltage across its terminal, irrespective of the current drawn from the source. Ideal Voltage Source have zero ... to reduce. (ii) Compare CB, CC and CE configuration

Describe the operation of transistor as a switch with suitable diagram.

Description : Describe the operation of transistor as a switch with suitable diagram.

Last Answer : In Bipolar Transistor as a Switch the biasing of the transistor, either NPN or PNP is arranged to operate the transistor at both sides of the I-V characteristics curves. The areas of operation for a transistor ... . OR Open switch Table indicating transistor as switch

Compare between active and passive components.

Description : Compare between active and passive components.

Last Answer : active component passive component  It is a device which amplify by producing an output signal with more power in it than that of input signal It is a device which ... bidirectional function semiconductor materials are used Non-semiconductor or semiconductor material is used

Describe the construction and working principle of single phase AC motor.

Description : Describe the construction and working principle of single phase AC motor.

Last Answer : construction and working principle of single phase AC motor : Single phase induction motors have a phase distributed winding on the stator and a squirrel cage short-circuited winding on the rotor. ... is the basic working principle of induction motor of either type, single phase of 3 phase.

Describe the construction and working principle of auto transformer.

Description : Describe the construction and working principle of auto transformer.

Last Answer : An auto transformer has single winding which is used as primary and secondary winding. This winding is wound on laminated enameled magnetic core.   OR   As shown in fig. 1 the input is ... this construction we can step up the voltage. So this transformer known as step up autotransformer.  

Explain with circuit diagram operation of zener diode as a voltage regulator.

Description : Explain with circuit diagram operation of zener diode as a voltage regulator.

Last Answer : The function of a regulator is to provide a constant output voltage to a load connected in parallel with it in spite of the ripples in the supply voltage or the variation in the load ... V0 = VZ is obtained across RL, whenever the input voltage remains within a minimum and maximum voltage.

Draw and describe circuit diagram of centre tapped rectifier with LC filter along with its input and output waveforms.

Description : Draw and describe circuit diagram of centre tapped rectifier with LC filter along with its input and output waveforms.

Last Answer : Explanation: A centre- tap full wave rectifier drive produces the rectified voltage and it drives the LC filter. We know that the series inductor filter is preferred for low values of load resistance ( ... load RL. The output voltage waveforms are similar to that as shown in figure above.  

Explain the operation of a full wave bridge rectifier with π filter using a neat diagram. Draw input and output waveforms.

Description : Explain the operation of a full wave bridge rectifier with π filter using a neat diagram. Draw input and output waveforms.

Last Answer : During positive half-cycle of input, the secondary voltage VAB is positive, so diodes D1 and D2 forward biased and D3 and D4 reverse biased. The load current flows from terminal A ... smooth DC voltage appears across the load. The input and output waveforms are shown in the figure.

Explain full wave bridged rectifier with the help of circuit diagram and input output waveform.

Description : Explain full wave bridged rectifier with the help of circuit diagram and input output waveform.

Last Answer : 1. In positive half cycle (0 to Π): The end A of the secondary winding becomes positive and end B negative. This makes diode D1 and D4 forward biased while diode D2 and D3 are reverse biased. These two diodes will ... D2 and D3 when it is conducting is as follows.  B - D2 - RL - D3 - A 

Define rectifier. Draw circuit diagram and input-output waveforms of bridge type full wave rectifier

Description : Define rectifier. Draw circuit diagram and input-output waveforms of bridge type full wave rectifier 

Last Answer : Rectifier - This circuit convert AC signal into DC.

With help of circuit diagram and waveform, explain working of CLC or π- filter.

Description : With help of circuit diagram and waveform, explain working of CLC or π- filter.

Last Answer : Circuit diagram CLC or Π filter:   Working : It consist of a filter capacitor C1 connected across the rectifier o/p , a choke L is series and another filter capacitor C2 connected across the load. ... to block. Therefore, only d.c component appears across the load and that is what we desire.  

With help of circuit diagram and waveform, explain shunt capacitor filter.

Description : With help of circuit diagram and waveform, explain shunt capacitor filter.

Last Answer : Circuit diagram and Waveform: OR Explanation: A filter circuit is one which removes the ac component present in the rectified output and allows the dc component to reach the ... which allows ac components. The remaining dc components present in the signal are collected at the output. 

What provides a visual representation of any waveform applied to the input terminals?

Description : What provides a visual representation of any waveform applied to the input terminals?

Last Answer : cathode ray oscilloscope (CRO)

The input voltage to an OP AMP is a large voltage step. The icetttput is an exponential waveform that...

Description : The input voltage to an OP AMP is a large voltage step. The output is an exponential waveform that changes to 0.25 V in 0.1µs (microsecond). The slew rate of the OP AMP is : -  a) 5V/µs b) 2.5 V/ µs c) 3V/µs d) 4.5V/ µs

Last Answer : The input voltage to an OP AMP is a large voltage step. The output is an exponential waveform that changes to 0.25 V in 0.1µs (microsecond). The slew rate of the OP AMP is : - 2.5 V/ µs

Explain auxiliary commutation with a neat diagram. Also draw its waveform.

Description : Explain auxiliary commutation with a neat diagram. Also draw its waveform.

Last Answer : Auxiliary Commutation At start, the Ta is triggered and turned on to carry the load current. Due to the resonant circuit R-L-C, the current initially rises, attains peak and then falls to ... , the firing of auxiliary SCR commutates the main SCR, hence name is auxiliary commutation.

Give the operation of single phase full wave bridge controlled converter with RL load with a neat diagram. Also draw its waveform.

Description : Give the operation of single phase full wave bridge controlled converter with RL load with a neat diagram. Also draw its waveform.

Last Answer : Single phase fully control bridge converter with RL load: 1. During positive half cycle of input voltage, T1 and T2 are forward biased and during negative half cycle, T3 and T4 are forward biased. Therefore, T1-T2 ... cycle till the firing of next pair of SCRs as shown in the waveform.

If the inductance of a choke-input filter is increased, will the output ripple voltage amplitude (Er) increase or decrease?

Description : If the inductance of a choke-input filter is increased, will the output ripple voltage amplitude (Er) increase or decrease?

Last Answer : Decrease.

In a certain electronic circuit the output is positive if input 1 is positive and input 2 is zero. If both inputs are positive the output is zero. This is: w) an AND circuit x) a NOR circuit y) an OR circuit z) a high-pass filter

Description : In a certain electronic circuit the output is positive if input 1 is positive and input 2 is zero. If both inputs are positive the output is zero. This is: w) an AND circuit x) a NOR circuit y) an OR circuit z) a high-pass filter

Last Answer : ANSWER: Y -- AN OR CIRCUIT

An artificial neurons receives n inputs x1, x2,...,xn with weights w1,w2,...,wn attached to the input links. The weighted sum ............... is computed to be passed on to a non-linear filter ϕ called activation function to release the output. (A) Σ wi (B) Σ xi (C) Σ wi + Σ xi (D) Σ wi . Σ xi

Description : An artificial neurons receives n inputs x1, x2,...,xn with weights w1,w2,...,wn attached to the input links. The weighted sum ............... is computed to be passed on to a non-linear filter ϕ called activation function to release the output. (A) Σ wi (B) Σ xi (C) Σ wi + Σ xi (D) Σ wi . Σ xi

Last Answer : (D) Σ wi . Σ xi

Draw block diagram of Dual slope integrating voltmeter and also draw waveform for voltage V/s time.

Description : Draw block diagram of Dual slope integrating voltmeter and also draw waveform for voltage V/s time. 

Last Answer : Block diagram

Draw waveform for standing waves on an open and shorted line. Prove that impedance is inverted at every quarter wavelength interval.

Description : Draw waveform for standing waves on an open and shorted line. Prove that impedance is inverted at every quarter wavelength interval.

Last Answer : Waveform- Explanation When the transmission line is short circuited voltage is zero and current is maximum.The variation is according to the wavelength. When the ... The pattern repeats for every half wavelength. Thus impedance is inverted at every quarter wavelength interval.

Draw amplitude modulated waveform in time domain and frequency domain with proper labeling.

Description : Draw amplitude modulated waveform in time domain and frequency domain with proper labeling.

Last Answer : AM in Time domain  AM in frequency domain

For R-C series circuit draw (i) Circuit diagram (ii) Vector diagram (iii) Waveform of voltage and current

Description : For R-C series circuit draw (i) Circuit diagram (ii) Vector diagram (iii) Waveform of voltage and current

Last Answer : i) Circuit diagram ii)Vector diagram iii)Waveform of voltage and current

Draw sinusoidal waveform of 3 phase emf and indicate the phase sequence.

Description : Draw sinusoidal waveform of 3 phase emf and indicate the phase sequence.

Last Answer : Phase sequence is R-Y-B.

What type damper (with bias) clamps the most negative extremity of the output waveform to a negative potential?

Description : What type damper (with bias) clamps the most negative extremity of the output waveform to a negative potential?

Last Answer : Positive clamper with negative bias.

To which polarity does a positive damper with positive bins clamp the most negative extremity of the output waveform (positive or negative)?

Description : To which polarity does a positive damper with positive bins clamp the most negative extremity of the output waveform (positive or negative)?

Last Answer : Positive potential.