Description : Railway tracks are banked on curves so that (a) Necessary centrifugal force may be obtained from the horizontal component of the weight of the train (b) Frictional force can be avoided between the tracks ... of the weight of the train (d) The train may not fly off in the opposite direction
Last Answer : Ans:(c)
Description : A car is moving along a straight horizontal road at a speed of 20 meters per second. The brakes are applied and a constant force of 5000 Newtons decelerates the car to a stop in 10 seconds. The mass of the car is: w) 1250 kilograms x) 2500 kilograms y) 5000 kilograms z) 10,000 kilograms
Last Answer : ANSWER: X -- 2500 KILOGRAMS
Description : Railway tracks are banked on curves so that : (1) the train may not fall down inwards. (2) the weight of the train may be reduced. (3) necessary centripetal force may be obtained from the ... normal reaction due to track. (4) no frictional force may be produced between the wheels and the track.
Last Answer : (3) necessary centripetal force may be obtained from the horizontal component of the normal reaction due to track. Explanation: A vehicle moving at a fast speed on a straight rail/ road has ... it experiences an additional force, termed as centripetal force, acting towards the centre of the circle.
Description : Railway tracks are banked on curves so that - (1) Necessary centrifugal force may be obtained from the horizontal component of the weight of the train (2) No frictional force may be produced between the ... the horizontal component of the weight of the train (4) The train may not fall down inwards
Last Answer : (3) Necessary centripetal force may be obtained from the horizontal component of the weight of the train
Description : Railway tracks are banked on curves so that (1) Necessary centrifugal force may be obtained from the horizontal component of the weight of the train (2) No frictional force may be produced between the ... the horizontal component of the weight of the train (4) The train may not fall down inwards
Last Answer : Necessary centripetal force may be obtained from the horizontal component of the weight of the train
Description : If the engine of a motor car moving up with an angle of 45 slope with a speed of 63kmh stops working suddenly how car move before coming to rest if it weighs 19600 and frictional force is 2000?
Last Answer : Need answer
Description : Direction of momentum is direction of object's A. mass B. acceleration C. velocity D. frictional force
Last Answer : velocity
Description : why does adjusting the camber in the front and rear of your car enable race tires to last longer? I race a Porsche 911 and am hearing differing things about the benifits of camber settings.
Last Answer : race tires are usually made of a softer rubber than normal street tires to enable better traction. changing the camber changes the weight distribution of the vehicle over the tire - and given that the ... sure that the right amount of pressure is being put on the tire to prevent uneven wear...
Description : _________ is affected by your brakes, tires, the road surface, and speed. -General Knowledge
Last Answer : Friction is affected by your brakes, tires, the road surface, and speed.
Description : Yes No
Last Answer : Yes
Description : A car moving at a speed 10 m/s on a straight road is ahead of car B moving in the same direction at 6 m/s. Find the velocity of A relative
Last Answer : A car moving at a speed 10 m/s on a straight road is ahead of car B moving in the same ... Find the velocity of A relative to B and vice-versa.
Description : In frictional fluid flow, the quantity, (P/ρ) + (V 2 /2gc) + gz/gc) is (A) Constant along a streamline (B) Not constant along a streamline (C) Increased in the direction of flow (D) None of these
Last Answer : (B) Not constant along a streamline
Description : The traction on rear wheels can be increased by increasing a) Weight on rear wheels b) Weight on front wheels c) Decreasing inflation pressure d) Both a and c Ans. d
Last Answer : ans d
Description : Extra widening required at a horizontal curve on a single lane hill road of radius 80 m for a design speed of 50 km ph and for a vehicle with wheel base 6.0 m is (A) 0.225 m (B) 0.589 m (C) 1.250 m (D) None of these
Last Answer : Answer: Option B
Description : The total value of extra widening required at a horizontal curve on a two lane hill road of radius 42 m for a design speed of 50 kmph and for vehicles with wheel base 6 m, is (A) 0.500 m (B) 0.589 m (C) 1.089 m (D) 0.089 m
Last Answer : Answer: Option C
Description : A district road with a bituminous pavement has a horizontal curve of 1000 m for a design speed of 75 km ph. The super-elevation is (A) 1 in 40 (B) 1 in 50 (C) 1 in 60 (D) 1 in 70
Last Answer : Answer: Option A
Description : Design of horizontal curves on highways, is based on (A) Design speed of vehicles (B) Permissible friction on the road surface (C) Permissible centrifugal ratio (D) All the above
Last Answer : Answer: Option D
Description : When frequency of occurrence of overload is less and magnitude of overload is also less than safety device used is a) Safety jump clutch b) Shear device c) Frictional device d) V-belt drive
Last Answer : a) Safety jump clutch
Description : When frequency of occurrence of overload is less but the mangnitude of overload is large than safety device used is: a) Safety jump clutch b) Shear device c) Frictional device d) V-belt drive
Last Answer : b) Shear device
Description : The coefficient of friction is a.The tangent of the angle between the normal reaction and direction of limiting friction b.The tangent of the angle between the normal reaction and the resultant ... e.The angle between the normal reaction and the resultant of normal reaction and the limiting friction
Last Answer : a. The tangent of the angle between the normal reaction and direction of limiting friction
Description : A car is running on a road at a uniform speed of 60 km/hr. What is the net resultant force on the car?
Last Answer : Equal to zero
Description : The angle of friction is a.The angle which frictional force makes with the normal b.The anle at which the force applied from external souce will cause movement c.The angle at which fictional ... the normal reaction and the resultant of normal reaction and the limiting friction e.None of the above
Last Answer : d. The angle between the normal reaction and the resultant of normal reaction and the limiting friction
Description : Kinetic friction is a.Maximum value of frictional force when a body is about to move b.Friction between two well lubricated bodies c.Friction force acting when the body is in motion d.Driction force which keeps a body in motion e.None of the above
Last Answer : c. Friction force acting when the body is in motion
Description : The maximum frictional force which comes into play when a body just begins to slide over the surface of another body is known as a.Kinetic friction b.Rolling friction c.Dynamic friction d.Limiting friction e.Sliding friction
Last Answer : d. Limiting friction
Description : What type of frictional force works when parachuting ?
Last Answer : Flowing friction force works when parachuting down.
Description : Is the frictional force to slow an object in motion?
Last Answer : Kinetic
Description : With increase of temperature, the frictional force acting between two surfaces (a) Increase (b) Remain the same (c) Decreases (d) becomes zero
Last Answer : Ans:(b)
Description : When milk is churned, the cream from it is separated due to (a) Gravitational force (b) Centrifugal force (c) Frictional force (d) Heat
Description : Cream gets separated out of milk when it is churned. This is due to– (1) gravitational force (2) centripetal force (3) centrifugal force (4) frictional force
Last Answer : (3) centrifugal force Explanation: During the churning of buttermilk, many particles of curd undergo rotatory motion: Then the particles with less weight experience more centripetal force and hence those particles ... force and so they are forced to the walls of the container away from the centre.
Description : The force which makes a vehicle to stop when break is applied is called – (1) gravitational force (2) vanderwalls force (3) frictional force (4) covalent force
Last Answer : (3) frictional force Explanation: A brake is a mechanical device that inhibits motion by absorbing energy from a moving system. It is used for slowing or stopping a moving vehicle, wheel, axle, or ... When the brakes are applied, work is done by the friction force between the brakes and the wheels.
Description : When the milk is churned vigorously the cream from it is separated out clue to – (1) Centripetal force (2) Gravitational force (3) Frictional force (4) Centrifugal force
Last Answer : (4) Centrifugal force Explanation: The separation of cream from milk is based on the fact that when liquids of different specific gravity revolve around the same centre at the same distance with the ... the lighter one. Milk consists of two liquids of different specific gravity: fat and milk serum.
Description : When milk is churned, the cream separates from it clue to: (1) Frictional force (2) Centrifugal force (3) Gravitation al force (4) Viscous forces
Last Answer : (2) Centrifugal force Explanation: The extraction of cream happens because of the work of centrifugal force which works outward. The separation of cream from milk is based on the fact that when liquids ... . Milk can be regarded as two liquids of different specific gravities, the serum and the fat.
Description : An Athlets runs before long jump to get advantage on – (1) Inertia of motion (2) Frictional force (3) Moment of a force (4) Principle of moments
Last Answer : (1) Inertia of motion Explanation: An athlete does so to build up forward momentum so that when he jumps he already has a forward motion that would be greater than that of a jump made from standing in ... in terms of inertia of motion which is the tendency of an object to resist a change in motion.
Description : Frictional force acting between parallel layers of a liquid is called?
Last Answer : Viscosity
Description : In order to slip one surface over another, maximum frictional force has to be overcome, this maximum frictional force between the two surfaces is also known as A. kinetic frictional force B. maximal frictional force C. limiting frictional force D. resisting force
Last Answer : limiting frictional force
Description : Reduction in vibration amplitude after one complete cycle of single degree free vibration with dry friction damping is_____, if where F"= frictional force between mass and surface and k =stiffness of the system. a)4F/k a b) 2f/K C) 3F/k D)8F/k
Last Answer : a)4F/k
Description : Frictional force encountered after commencement of motion is called (A) Post friction (B) Limiting friction (C) Kinematic friction (D) Dynamic friction
Last Answer : (D) Dynamic friction
Description : The maximum frictional force which comes into play when a body just begins to slide over another surface is called (A) Limiting friction (B) Sliding friction (C) Rolling friction (D) Kinematic friction
Last Answer : (A) Limiting friction
Description : In order that flow takes place between two points in a pipeline, the differential pressure between these points must be more than (A) Frictional force (B) Viscosity (C) Surface friction (D) All of the above
Description : Unemployment that is caused by a mismatch between the composition of the labor force (in terms of skills, occupation, industries, or geographic location) and the make-up of the ... . Real wage unemployment B. Deficient-demand unemployment C. Frictional unemployment D. Structural Unemployment
Last Answer : D. Structural Unemployment
Description : Unemployment that is caused by a mismatch between the composition of the labor force (in terms of skills, occupation, industries, or geographic location) and the make-up of the demand for ... unemployment ; (b) Deficient-demand unemployment ; (c) Frictional unemployment ; (d) Structural Unemployment
Last Answer : (d) Structural Unemployment
Description : A man exerts a northward force of 100 newtons on a 50 kilogram box which sits on a level floor. If the frictional force is 80 newtons, what is the magnitude of the northward acceleration of the box?
Last Answer : ANSWER: 0.4 METERS PER SECOND SQUARED
Description : Which of the following forces is nonconservative? w) gravitational force x) electrostatic force y) sliding frictional force z) restorative force of a spring
Last Answer : ANSWER: Y -- SLIDING FRICTIONAL FORCE
Description : Cream gets separated out of milk when it is churned. This is due to (1) gravitational force (2) centripetal force (3) centrifugal force (4) frictional force
Last Answer : centrifugal force
Description : The force which makes a vehicle to stop when break is applied is called (1) gravitational force (2) vanderwalls force (3) frictional force (4) covalant force
Last Answer : frictional force
Description : When the milk is churned vigorously the cream from it is separated out due to (3) Centripetal force (2) Gravitational force (3) Frictional force (4) Centrifugal force
Last Answer : Centrifugal force
Description : When milk is churned, the cream separates from it due to: (1) Frictional force (2) Centrifugal force (3) Gravitational force (4) Viscous forces
Description : An athlete runs before long jump to get advantage on (1) Inertia of motion (2) Frictional force (3) Moment of a force (4) Principle of moments
Last Answer : Inertia of motion
Description : Frictional force encountered after commencement of motion is called?
Last Answer : Frictional force encountered after commencement of motion is called dynamic friction.