_____is a closed loop system.

1 Answer

Answer :

Auto-pilot for an aircraft is a closed loop system.

Related questions

Description : _____is an open loop control system.

Last Answer : Field controlled D.C. motor is an open loop control system.

Description : The characteristic equation for a closed loop system with forward gain K is s4 + 4s3 + 8s2 + 6s + K = 0. The critical gain value Kc for stability should not exceed  (a) 3.25 (b) 9.75 (c) 13.0 (d) 23.3

Last Answer : The characteristic equation for a closed loop system with forward gain K is s4 + 4s3 + 8s2 + 6s + K = 0. The critical gain value Kc for stability should not exceed  (a) 3.25 (b) 9.75 (c) 13.0 (d) 23.3

Description : Negative feedback in a closed-loop control system DOES NOT (A) reduce the overall gain (B) reduce bandwidth (C) improve disturbance rejection (D) reduce sensitivity to parameter variation

Last Answer : Negative feedback in a closed-loop control system DOES NOT reduce bandwidth

Description : In a closed loop control system  (a) control action depends upon the output and also on the input command (b) output signal is fed back to be compared with the reference signal (c) the accuracy is better than in the open loop system (d) all of the above

Last Answer : In a closed loop control system control action depends upon the output and also on the input command , output signal is fed back to be compared with the reference signal , the accuracy is better than in the open loop system. 

Last Answer : In a closed-loop system in which the output is the speed of a motor, the output rate control can be used to limit the acceleration of the motor.

Description : In closed loop control system, with positive value of feedback gain the overall gain of the system will

Last Answer : In closed loop control system, with positive value of feedback gain the overall gain of the system will decrease.

Description : What are some examples of a closed loop system?

Last Answer : C.L s/m. EX. Air conditioner (AC), rocket launcher, radar system, voltage stabilizer etc.

Description : Order of the open loop transfer function is _____ to order of closed loop transfer function   (a) not equal (b) equal (c) less than (d) greater than 

Last Answer : Order of the open loop transfer function is equal to order of closed loop transfer function 

Description : After drawing the Root-Locus, the closed-loop poles corresponding to a specified value of gain K can be determined from which of the following criterion ? (A) Magnitude criterion alone (B) Angle criterion alone (C) Both Magnitude and Angle criteria (D) Angle of departure and angle of arrival.

Last Answer : After drawing the Root-Locus, the closed-loop poles corresponding to a specified value of gain K can be determined from which of the following criterion ? (A) Magnitude criterion alone (B) Angle ... (C) Both Magnitude and Angle criteria (D) Angle of departure and angle of arrival.

Description : What will happen to the gain margin if the gain of the open loop system is doubled? A) Doubled B) Becomes half C) Is not affected D) Becomes one-fourth 

Last Answer : What will happen to the gain margin if the gain of the open loop system is doubled? A) Doubled B) Becomes half C) Is not affected D) Becomes one-fourth 

Description : The open loop control system is one in which _____.

Last Answer : the output is independent of output

Description : The loop transfer of a system is G(s) H(s) = 5/(s+1) (2s+1)(3s+1) which has the phase crossover frequency fc = 0.16 Hz. The gain margin (dB) of the system is  (a) 6 (b) 4 (c) 2 (d) 0

Last Answer : The loop transfer of a system is G(s) H(s) = 5/(s+1) (2s+1)(3s+1) which has the phase crossover frequency fc = 0.16 Hz. The gain margin (dB) of the system is 6

Description : If the gain of the open loop system is doubled, the gain margin  (1) Is not affected (2) Gets doubled (3) Becomes half (4) Becomes one -forth

Last Answer : If the gain of the open loop system is doubled, the gain margin Becomes half

Description : An automatic toaster is a ______ loop control system.

Last Answer : An automatic toaster is an open loop control system.

Description : In open loop system

Last Answer : In open loop system the control action is independent of the output.

Last Answer : In an open loop control system Output is independent of control input.

Description : What is an example of an open loop system?

Last Answer : Open loop system. Ex. Electric heater, washing machine, fan, electric switch, etc

Description : What are the advantages of open loop control system?

Last Answer : Open loop control system are simple to design. Open loop control system are generally stable.

Description : what is open loop and close loop control system?

Last Answer : A) In open loop system the input is independent         of output but output is depends on input. A-1. no feedback path in open loop s/m    -2. less accuracy than close loop s/m. Ex. Washing ...    -3. high accuracy. Ex. Air conditioner ( AC ), rocket launcher, radar          system, etc

Description : In root locus plot, a point on the real axis lies on the locus, if the number of open loop poles plus zeros on real axis to the a) left of the point is odd b) left of the point is even . c) right of the pointis odd d) right of the point is even

Last Answer : In root locus plot, a point on the real axis lies on the locus, if the number of open loop poles plus zeros on real axis to the right of the pointis odd

Description : _____is the process of finding errors in software code. 1) Compiling 2) Testing 3) Running 4) Debugging 6 5) None of these

Last Answer : Answer :4

Description : _____is the science that attempts to produce machines that display the same type of intelligence that humans do. 1) Nano science 2) Nanotechnology 3) Simulation 4) Artificial intelligence (AI) 5) None of these

Last Answer : Answer :4

Description : _____is not an allotrope of carbon. (1) Buckminsterfullerene (2) Carbon Doxide (3) Diamond (4) Graphite

Last Answer : (2) Carbon Doxide Explanation: Carbon is capable of forming many allotropes due to its valency. Well-known forms of carbon include diamond and graphite. Other allotropes in clude: include buckyballs (fullerenes), amorphous carbon, glassy carbon, carbon nanofoam, nanotubes,and others.

Description : _____is the nematode that causes the blackhead disease in banana crop? A. Pratylenchus coffee B. Heterodera oryzicola C. Radopholus similis D. Helicotylenchus multicinctus

Last Answer : C. Radopholus similis

Description : _____is a computer program that is loaded into a computer without the owner's knowledge: a) Hack Material b) Viruses c) Both of Above d) None of These

Last Answer : b) Viruses

Description : _____is an abbreviation for binary digit: a) bingit b) base c) bit d) None of The Above

Last Answer : c) bit

Description : _____is the product of data processing: a) Data b) Information c) A Computer d) None of The Above

Last Answer : b) Information

Description : A _____is defined as "some sort of hardware architecture or software framework (including application frameworks), that allows software to run: a) Antalogy b) Platforms c) Toylogy d) None of These

Last Answer : b) Platforms

Description : _____is referred as both fund based and fee based financial service.(a) Higher purchase b) underwriting c) Factoring)

Last Answer : b) underwriting

Description : _____is used to detect wireless networks on the windows platform a) Medusa b) NetStumbler c) SQLMap d) Iraon WASP

Last Answer : b) NetStumbler

Last Answer : Hygroscopicity is the property of absorbing moisture from atmosphere.

Description : _____is viscoelastic.

Last Answer : Rubber is viscoelastic.

Description : In which system we get feedback? a.Open-loop system b.Machine control system c.Closed-loop system d.None of the above

Last Answer : c.Closed-loop system

Description : Which of the following statements is correct for any closed loop system ? (a) All the co-efficients can have zero value (6) All the co-efficients are always non-zero (c) Only one of the static error co-efficients has a finite non-zero value (d) None of the above

Last Answer : Ans: C

Description : On which of the following factors does the sensitivity of a closed loop system to gain changes and load disturbances depend? a) Frequency b) Loop gain c) Forward gain d) All of the mentioned

Last Answer : Ans: D

Description : Closed loop and Open loop Control System Advantages and Disadvantages

Last Answer : Open Loop Control System: Control System in which output quantity has no effect on the input quantity is called Open Loop Control System. Open Loop Control System has no facility to correct automatically the ... in the closed loop system and more care is needed to design a stable closed loop system

Description : What basic requirement of a closed-loop system (not present in open-loops) enables present load position to be sensed?

Last Answer : Feedback.

Description : Explain Closed loop and Open loop system with sketch. 

Last Answer : Closed Loop System: [1] The name indicates that the closed loop control system has a loop that is closed as shown in figure. [2] A feedback device is used for this purpose. This makes ... system is generally used in point-to-point systems where the accuracy requirements are not critical. 

Description : With the help of block diagram explain closed loop control CNC system. 

Last Answer : Special motors called servos are used for executing machine movements in closed loop system. The name indicates that the closed loop control system has a loop that is closed as shown in fig. ... to the drive unit and the cycle repeats until there is no error signal from the comparator.

Description : Describe open loop and closed loop system.

Last Answer : Open loop and closed loop system: Open system: When the input is independent of the output, the system is called open- loop system. The control action is based on only some ... system is called closed- loop control system. The output is continuously measured and fed to the input. 

Description : Difference between open loop and closed loop control system

Last Answer : Difference between open loop and closed loop control system : Sr No. Open loop control system Closed loop control system  1 Feedback doesn't exists Feedback exists 2 ... and hence costly 9 Highly affected by nonlinearities Reduced effect of non-linearity

Description : If the characteristics equation of a closed loop system is s2+2s+2=0, then the system is  (A) Over damped (B) Critically damped (C) Under damped (D) Undamped 

Last Answer : C. Solving the above character equation gives complex roots -1+i and -1-i. If we plot that roots on real and imaginary axis plane(s-plane), it will be completely on left side of s-plane. So, the oscillations of the above conjugate roots are underdamped and are absolutely stable.

Description : Would this not be a good example of a closed loop paradox?

Last Answer : No, it’s a disgusting example of a closed loop paradox.

Description : With reference to NC machines, which of the following statements is wrong a.Both closed-loop and open-loop control systems are used b.Paper tapes, floppy tapes and cassettes are used for data storage c.Digitizers may be used as interactive input devices d.Post processor is an item of hardware

Last Answer : c.Digitizers may be used as interactive input devices

Description : A rectangular loop consists of N closed wrapped turns and has dimendions `a xx b`. The loop is hinged along the Y-axis. What is the magnitude of the t

Last Answer : A rectangular loop consists of N closed wrapped turns and has dimendions `a xx b`. The loop is hinged along the Y- ... . `(-2Ni_(0)abB_(0)hat(j))/(5)`

Description : A current l flows through a closed loop as shown in figure .The magnetic field at the centre O is

Last Answer : A current l flows through a closed loop as shown in figure .The magnetic field at the centre O is A. ... )l)/(2piR)(theta+sintheta)` D. None of these

Description : When the work done in moving a particle round a closed loop in a field is zero, the forces in the field are called A. Zero forces B. Non-Conservative forces C. Conservative forces D. Viscous forces

Last Answer : Conservative forces

Description : G(s) = (1-s)/s(s+2) then closed loop transfer function is a) Unstable b) Stable c) Marginally stable d) All

Last Answer : Ans: Stable

Description : select the correct response from the choices given in the parentheses. Q-20. In a closed-loop configuration the output signal is determined by (the input signal, the feedback signal, both).

Last Answer : Both the input signal and the feedback signal.

Description : What does the term "closed-loop" mean in the closed-loop configuration of an operational amplifier?

Last Answer : The use of degenerative (negative) feed-back