Which of the following statements is correct for any closed loop system ? (a) All the co-efficients can have zero value (6) All the co-efficients are always non-zero (c) Only one of the static error co-efficients has a finite non-zero value (d) None of the above

Which of the following statements is correct for any closed loop system ? (a) All the co-efficients can have zero value (6) All the co-efficients are always non-zero (c) Only one of the static error co-efficients has a finite non-zero value (d) None of the above
by

1 Answer

Answer :

Ans: C
by
selected by

Related questions

Static error co-efficients are used as a measure of the effectiveness of...

Description : Static error co-efficients are used as a measure of the effectiveness of closed loop systems for specified ________ input signal.

Last Answer : acceleration , velocity, position 

A first order gaseous phase reaction is catalysed by a non-porous solid. The kinetic rate constant and the external mass transfer co-efficients are k and kg respectively. The effective rate constant (ke ff) is given by (A) ke ff = k + kg (B) ke ff = (k+ kg )/2 (C) ke ff = (kkg ) 1/2 (D) 1/ke ff = 1/k + 1/kg

Description : A first order gaseous phase reaction is catalysed by a non-porous solid. The kinetic rate constant and the external mass transfer co-efficients are k and kg respectively. The effective rate constant (ke ff) is given by (A) ke ff = k + kg ( ... + kg )/2 (C) ke ff = (kkg ) 1/2 (D) 1/ke ff = 1/k + 1/kg

Last Answer : (D) 1/ke ff = 1/k + 1/kg

Van Laar equation deals with the activity co-efficients in (A) Binary solutions (B) Ternary solutions (C) Azeotropic mixture only (D) None of these

Description : Van Laar equation deals with the activity co-efficients in (A) Binary solutions (B) Ternary solutions (C) Azeotropic mixture only (D) None of these

Last Answer : (A) Binary solutions

Which of the following is true for Virial equation of state? (A) Virial co-efficients are universal constants (B) Virial co-efficients 'B' represents three body interactions (C) Virial co-efficients are function of temperature only (D) For some gases, Virial equations and ideal gas equations are the same

Description : Which of the following is true for Virial equation of state? (A) Virial co-efficients are universal constants (B) Virial co-efficients 'B' represents three body interactions (C) Virial co-efficients ... of temperature only (D) For some gases, Virial equations and ideal gas equations are the same

Last Answer : (C) Virial co-efficients are function of temperature only

When the work done in moving a particle round a closed loop in a field is zero, the forces in the field are called A. Zero forces B. Non-Conservative forces C. Conservative forces D. Viscous forces

Description : When the work done in moving a particle round a closed loop in a field is zero, the forces in the field are called A. Zero forces B. Non-Conservative forces C. Conservative forces D. Viscous forces

Last Answer : Conservative forces

The relation among various mass transfer co-efficients (M.T.C) for ideal gases is given by (where, Kc & Km are M.T.C. for equimolar counter diffusion with concentration & mole fraction respectively as the driving force. and, Kp= M.T.C. for diffusion of a gas through a stagnant inert gas with pressure as driving force.) (A) Kc = Kp = Km (B) Kc = Kp /RT = Km . RT/P (C) Kc = Kp . RT = Km . RT/p (D) None of these

Description : The relation among various mass transfer co-efficients (M.T.C) for ideal gases is given by (where, Kc & Km are M.T.C. for equimolar counter diffusion with concentration & mole fraction respectively as the driving ... (C) Kc = Kp . RT = Km . RT/p (D) None of these

Last Answer : (C) Kc = Kp . RT = Km . RT/p

The individual mass transfer co-efficients (moles/m2s) for absorption of a solute from a gas mixture into a liquid solvent are, KL = 4.5 and KG = 1.5. The slope of the equilibrium line is 3. Which of the following resistance (s) is (are) controlling? (A) Liquid side (B) Gas side (C) Interfacial (D) Both liquid and gas side

Description : The individual mass transfer co-efficients (moles/m2s) for absorption of a solute from a gas mixture into a liquid solvent are, KL = 4.5 and KG = 1.5. The slope of the equilibrium line is 3. Which of ... A) Liquid side (B) Gas side (C) Interfacial (D) Both liquid and gas side

Last Answer : (B) Gas side

In a vapor-liquid contacting equipment, the overall gas phase mass transfer co-efficient (M.T.C), KG is related to individual co-efficients (KG and KL ) as (A) KG = 1/KG + m/KL (B) 1/KG = 1/KG + m/KL (C) 1/KG = 1/KL + m/KG (D) KG = 1/KL + m/KG

Description : In a vapor-liquid contacting equipment, the overall gas phase mass transfer co-efficient (M.T.C), KG is related to individual co-efficients (KG and KL ) as (A) KG = 1/KG + m/KL (B) 1/KG = 1/KG + m/KL (C) 1/KG = 1/KL + m/KG (D) KG = 1/KL + m/KG

Last Answer : (B) 1/KG = 1/KG + m/KL

The advantage of backward feed multiple effect evaporators over forward feed units is that (A) Heat sensitive material can be handled (B) There is no additional cost of pumping (C) Most concentrated liquid is at highest temperature (D) Equal heat transfer co-efficients exist in various effects

Description : The advantage of backward feed multiple effect evaporators over forward feed units is that (A) Heat sensitive material can be handled (B) There is no additional cost of pumping ... liquid is at highest temperature (D) Equal heat transfer co-efficients exist in various effects

Last Answer : (C) Most concentrated liquid is at highest temperature

For condensation of pure vapors, if the heat transfer co-efficients in filmwise and drop-wise condensation are respectively hf and hd , then (A) hf = hd (B) hf > hd (C) hf < hd (D) hf could be greater or smaller than hd

Description :  For condensation of pure vapors, if the heat transfer co-efficients in filmwise and drop-wise condensation are respectively hf and hd , then (A) hf = hd (B) hf > hd (C) hf < hd (D) hf could be greater or smaller than hd

Last Answer : (C) hf < hd

In an interphase heat transfer process, the equilibrium state corresponds to equality of temperature in the two phases, while the condition for equilibrium in an interphase mass transfer process is equality of (A) Concentrations (B) Chemical potentials (C) Activity co-efficients (D) Mass transfer co-efficients

Description : In an interphase heat transfer process, the equilibrium state corresponds to equality of temperature in the two phases, while the condition for equilibrium in an interphase mass transfer process is ... B) Chemical potentials (C) Activity co-efficients (D) Mass transfer co-efficients

Last Answer : (A) Concentrations

On which of the following factors does the sensitivity of a closed loop system to gain changes and load disturbances depend? a) Frequency b) Loop gain c) Forward gain d) All of the mentioned

Description : On which of the following factors does the sensitivity of a closed loop system to gain changes and load disturbances depend? a) Frequency b) Loop gain c) Forward gain d) All of the mentioned

Last Answer : Ans: D

Closed loop and Open loop Control System Advantages and Disadvantages

Description : Closed loop and Open loop Control System Advantages and Disadvantages

Last Answer : Open Loop Control System: Control System in which output quantity has no effect on the input quantity is called Open Loop Control System. Open Loop Control System has no facility to correct automatically the ... in the closed loop system and more care is needed to design a stable closed loop system

To solve the FEM problem, it subdivides a large problem into smaller, simpler parts that arecalled a.static elements b.dynamic elements c.infinite elements d.finite elements

Description : To solve the FEM problem, it subdivides a large problem into smaller, simpler parts that arecalled a.static elements b.dynamic elements c.infinite elements d.finite elements

Last Answer : d.finite elements

Consider the following statements related to compiler construction: I. Lexical Analysis is specified by context-free grammars and implemented by pushdown automata. II. Syntax Analysis is specified by regular expressions and implemented by finite-state machine. Which of the above statement(s) is/are correct? (1) Only l (2) Only ll (3) Both I and II (4) Neither I nor Il

Description : Consider the following statements related to compiler construction: I. Lexical Analysis is specified by context-free grammars and implemented by pushdown automata. II. Syntax Analysis is specified by regular expressions and implemented by ... Only l (2) Only ll (3) Both I and II (4) Neither I nor Il

Last Answer : Answer: 4

G(s) = (1-s)/s(s+2) then closed loop transfer function is a) Unstable b) Stable c) Marginally stable d) All

Description : G(s) = (1-s)/s(s+2) then closed loop transfer function is a) Unstable b) Stable c) Marginally stable d) All

Last Answer : Ans: Stable

A field in which a test charge around any closed surface in static path is zero is called a) Solenoidal b) Rotational c) Irrotational d) Conservativ

Description : A field in which a test charge around any closed surface in static path is zero is called a) Solenoidal b) Rotational c) Irrotational d) Conservativ

Last Answer : d) Conservative

Materials, whose resistivity at very low temperatures plunges from a finite value to zero and remains there...

Description : Materials, whose resistivity at very low temperatures plunges from a finite value to zero and remains there upon further cooling, are known as

Last Answer : Materials, whose resistivity at very low temperatures plunges from a finite value to zero and remains there upon further cooling, are known as Superconductors

Which of the following statements concerning AC circuits is correct? A. The power factor of a resistive circuit is always zero. B. True power in an inductive circuit always equals apparent power. C. Inductive reactance varies directly with the frequency and the inductance. D. Total opposition to the flow of alternating current depends upon the amount of reactive power.

Description : Which of the following statements concerning AC circuits is correct? A. The power factor of a resistive circuit is always zero. B. True power in an inductive circuit always equals apparent power. ... . D. Total opposition to the flow of alternating current depends upon the amount of reactive power.

Last Answer : Answer: C

Which one of the following is not the law of dry friction? a.If friction is neglected, the reactions are always normal to the surfaces on contact b.Friction always acts to oppose the relative motion of the free body c.If static friction is acting, the value of the friction force may vary from zero to its maximum value d.The force of friction is always normal to the surface e.All of the above

Description : Which one of the following is not the law of dry friction? a.If friction is neglected, the reactions are always normal to the surfaces on contact b.Friction always acts to oppose the relative motion of ... its maximum value d.The force of friction is always normal to the surface e.All of the above

Last Answer : d. The force of friction is always normal to the surface

With reference to NC machines, which of the following statements is wrong a.Both closed-loop and open-loop control systems are used b.Paper tapes, floppy tapes and cassettes are used for data storage c.Digitizers may be used as interactive input devices d.Post processor is an item of hardware

Description : With reference to NC machines, which of the following statements is wrong a.Both closed-loop and open-loop control systems are used b.Paper tapes, floppy tapes and cassettes are used for data storage c.Digitizers may be used as interactive input devices d.Post processor is an item of hardware

Last Answer : c.Digitizers may be used as interactive input devices

In closed loop control system, with positive value of feedback gain the overall gain of the system will

Description : In closed loop control system, with positive value of feedback gain the overall gain of the system will

Last Answer : In closed loop control system, with positive value of feedback gain the overall gain of the system will decrease.

A non inverting closed loop op amp circuit generally has a gain factor

Last Answer : A non inverting closed loop op amp circuit generally has a gain factor Greater than one.

After drawing the Root-Locus, the closed-loop poles corresponding to a specified value of gain K can be

Description : After drawing the Root-Locus, the closed-loop poles corresponding to a specified value of gain K can be determined from which of the following criterion ? (A) Magnitude criterion alone (B) Angle criterion alone (C) Both Magnitude and Angle criteria (D) Angle of departure and angle of arrival.

Last Answer : After drawing the Root-Locus, the closed-loop poles corresponding to a specified value of gain K can be determined from which of the following criterion ? (A) Magnitude criterion alone (B) Angle ... (C) Both Magnitude and Angle criteria (D) Angle of departure and angle of arrival.

Finite element analysis deals with . a.approximate numerical solution b.non-boundary value problems c.Laplace equations d.All of the above

Description : Finite element analysis deals with . a.approximate numerical solution b.non-boundary value problems c.Laplace equations d.All of the above

Last Answer : a.approximate numerical solution

select the correct response from the choices given in the parentheses. Q-20. In a closed-loop configuration the output signal is determined by (the input signal, the feedback signal, both).

Description : select the correct response from the choices given in the parentheses. Q-20. In a closed-loop configuration the output signal is determined by (the input signal, the feedback signal, both).

Last Answer : Both the input signal and the feedback signal.

With respect to a loop in the transportation table, which one of the following is not correct? (1) Every loop has an odd no. of cells and at least 5. (2) Closed loops may or may not b square in shape. (3) All the cells in the loop that have a plus or minus sign, except the starting cell, must be occupied cells. (4) Every loop has an even no. of cells and at least four.

Description : With respect to a loop in the transportation table, which one of the following is not correct? (1) Every loop has an odd no. of cells and at least 5. (2) Closed loops may or may not b square in ... starting cell, must be occupied cells. (4) Every loop has an even no. of cells and at least four.

Last Answer : Every loop has an odd no. of cells and at least 5.

A switchboard ammeter indicates a reading slightly above 'zero' when the leads are disconnected, this is caused by _____________. A. mechanical misalignment of the meter pointer B. a poor ground for the meter case C. static electricity in the air D. capacitors inside the meter storing charges

Description : A switchboard ammeter indicates a reading slightly above 'zero' when the leads are disconnected, this is caused by _____________. A. mechanical misalignment of the meter pointer B. a poor ground for the meter case C. static electricity in the air D. capacitors inside the meter storing charges

Last Answer : Answer: A

An ammeter reads slightly above 'zero' when its leads are disconnected, this is a result of ___________. A. mechanical misalignment of the meter pointer B. a poor ground for the meter case C. static electricity in the air D. resistors inside the meter storing charges

Description : An ammeter reads slightly above 'zero' when its leads are disconnected, this is a result of ___________. A. mechanical misalignment of the meter pointer B. a poor ground for the meter case C. static electricity in the air D. resistors inside the meter storing charges

Last Answer : Answer: A

In a free vortex motion, the radial component of velocity everywhere is (A) Maximum (B) Minimum(C) Zero (D) Nonzero and finite

Description : In a free vortex motion, the radial component of velocity everywhere is (A) Maximum (B) Minimum (C) Zero (D) Nonzero and finite

Last Answer : Answer: Option C

In a forced vortex, the velocity of flow everywhere within the fluid is (A) Maximum (B) Minimum (C) Zero (D) Nonzero finite

Description : In a forced vortex, the velocity of flow everywhere within the fluid is (A) Maximum (B) Minimum (C) Zero (D) Nonzero finite

Last Answer : Answer: Option D

Source of information depending on finite no of outputs is called a. A. markov b. B. finite memory source c. C. zero source d. D. Both A and B

Description : Source of information depending on finite no of outputs is called a. A. markov b. B. finite memory source c. C. zero source d. D. Both A and B

Last Answer : d. D. Both A and B

Resistance of an ideal insulator is a. Infinite b. Zero c. Finite d. depends upon nature

Description : Resistance of an ideal insulator is a. Infinite b. Zero c. Finite d. depends upon nature

Last Answer : a. Infinite

Resistance of a super conductor is a. Finite b. Infinite c. Zero d. changes with every conductor

Description : Resistance of a super conductor is a. Finite b. Infinite c. Zero d. changes with every conductor

Last Answer : c. Zero

Which of the following identities is always zero for static fields? a) Grad(Curl V) b) Curl(Div V) c) Div(Grad V) d) Curl(Grad V)

Description : Which of the following identities is always zero for static fields? a) Grad(Curl V) b) Curl(Div V) c) Div(Grad V) d) Curl(Grad V)

Last Answer : d) Curl(Grad V)

Which of the following statements is correct relating to the auditor’s consideration of fraud? a. The auditor’s interest in fraud consideration relates to fraudulent acts that cause a material misstatement of financial statements. b. A primary factor that distinguishes fraud from error is that fraud is always intentional, while errors are generally, but not always, intentional. c. While an auditor should be aware of the possibility of fraud, management, and not the auditor, is responsible for detecting fraud. d. Fraud always involves a pressure or incentive to commit fraud, and a misappropriation of assets

Description : Which of the following statements is correct relating to the auditor's consideration of fraud? a. The auditor's interest in fraud consideration relates to fraudulent acts that cause a material ... d. Fraud always involves a pressure or incentive to commit fraud, and a misappropriation of assets

Last Answer : The auditor’s interest in fraud consideration relates to fraudulent acts that cause a material misstatement of financial statements.

In which system we get feedback? a.Open-loop system b.Machine control system c.Closed-loop system d.None of the above

Description : In which system we get feedback? a.Open-loop system b.Machine control system c.Closed-loop system d.None of the above

Last Answer : c.Closed-loop system

What basic requirement of a closed-loop system (not present in open-loops) enables present load position to be sensed?

Description : What basic requirement of a closed-loop system (not present in open-loops) enables present load position to be sensed?

Last Answer : Feedback.

Explain Closed loop and Open loop system with sketch.

Description : Explain Closed loop and Open loop system with sketch. 

Last Answer : Closed Loop System: [1] The name indicates that the closed loop control system has a loop that is closed as shown in figure. [2] A feedback device is used for this purpose. This makes ... system is generally used in point-to-point systems where the accuracy requirements are not critical. 

With the help of block diagram explain closed loop control CNC system.

Description : With the help of block diagram explain closed loop control CNC system. 

Last Answer : Special motors called servos are used for executing machine movements in closed loop system. The name indicates that the closed loop control system has a loop that is closed as shown in fig. ... to the drive unit and the cycle repeats until there is no error signal from the comparator.

Describe open loop and closed loop system.

Description : Describe open loop and closed loop system.

Last Answer : Open loop and closed loop system: Open system: When the input is independent of the output, the system is called open- loop system. The control action is based on only some ... system is called closed- loop control system. The output is continuously measured and fed to the input. 

Difference between open loop and closed loop control system

Description : Difference between open loop and closed loop control system

Last Answer : Difference between open loop and closed loop control system : Sr No. Open loop control system Closed loop control system  1 Feedback doesn't exists Feedback exists 2 ... and hence costly 9 Highly affected by nonlinearities Reduced effect of non-linearity

The characteristic equation for a closed loop system with forward gain K is s4 + 4s3 + 8s2 + 6s + K = 0.

Description : The characteristic equation for a closed loop system with forward gain K is s4 + 4s3 + 8s2 + 6s + K = 0. The critical gain value Kc for stability should not exceed  (a) 3.25 (b) 9.75 (c) 13.0 (d) 23.3

Last Answer : The characteristic equation for a closed loop system with forward gain K is s4 + 4s3 + 8s2 + 6s + K = 0. The critical gain value Kc for stability should not exceed  (a) 3.25 (b) 9.75 (c) 13.0 (d) 23.3

Negative feedback in a closed-loop control system DOES NOT

Description : Negative feedback in a closed-loop control system DOES NOT (A) reduce the overall gain (B) reduce bandwidth (C) improve disturbance rejection (D) reduce sensitivity to parameter variation

Last Answer : Negative feedback in a closed-loop control system DOES NOT reduce bandwidth

In a closed loop control system ...

Description : In a closed loop control system  (a) control action depends upon the output and also on the input command (b) output signal is fed back to be compared with the reference signal (c) the accuracy is better than in the open loop system (d) all of the above

Last Answer : In a closed loop control system control action depends upon the output and also on the input command , output signal is fed back to be compared with the reference signal , the accuracy is better than in the open loop system. 

If the characteristics equation of a closed loop system is s2+2s+2=0, then the system is...

Description : If the characteristics equation of a closed loop system is s2+2s+2=0, then the system is  (A) Over damped (B) Critically damped (C) Under damped (D) Undamped 

Last Answer : C. Solving the above character equation gives complex roots -1+i and -1-i. If we plot that roots on real and imaginary axis plane(s-plane), it will be completely on left side of s-plane. So, the oscillations of the above conjugate roots are underdamped and are absolutely stable.

In a closed-loop system in which the output is the speed of a motor, the output rate control can be used to_________.

Last Answer : In a closed-loop system in which the output is the speed of a motor, the output rate control can be used to limit the acceleration of the motor.