What basic requirement of a closed-loop system (not present in open-loops) enables present load position to be sensed?

What basic requirement of a closed-loop system (not  present in open-loops) enables present load position to be  sensed?
by

1 Answer

Answer :

Feedback.
by

Related questions

In an open-loop control system, what action reduces the input to zero so the load is stopped at the desired position?

Description : In an open-loop control system, what action reduces the input to zero so the load is stopped at the desired position?

Last Answer : Usually the operator senses the desired load movement and reduces the input to stop the motor.

With respect to a loop in the transportation table, which one of the following is not correct? (1) Every loop has an odd no. of cells and at least 5. (2) Closed loops may or may not b square in shape. (3) All the cells in the loop that have a plus or minus sign, except the starting cell, must be occupied cells. (4) Every loop has an even no. of cells and at least four.

Description : With respect to a loop in the transportation table, which one of the following is not correct? (1) Every loop has an odd no. of cells and at least 5. (2) Closed loops may or may not b square in ... starting cell, must be occupied cells. (4) Every loop has an even no. of cells and at least four.

Last Answer : Every loop has an odd no. of cells and at least 5.

Loop unrolling is a code optimization technique: (A) that avoids tests at every iteration of the loop (B) that improves performance by decreasing the number of instructions in a basic block. (C) that exchanges inner loops with outer loops (D) that reorders operations to allow multiple computations to happen in parallel.

Description : Loop unrolling is a code optimization technique: (A) that avoids tests at every iteration of the loop (B) that improves performance by decreasing the number of instructions in a basic block. ... loops with outer loops (D) that reorders operations to allow multiple computations to happen in parallel.

Last Answer : (A) that avoids tests at every iteration of the loop

What is the advantage of using a closed-servo loop to control load velocity?

Description : What is the advantage of using a closed-servo loop to control load velocity?

Last Answer : The closed-servo loop can regulate load speed under changing conditions.

How do closed-loop capstan drive tape transports overcome the disadvantages of the open-loop drive design?

Description : How do closed-loop capstan drive tape transports overcome the disadvantages of the open-loop drive design?

Last Answer : Closed loop capstan drive transports use more than one capstan to clamp the tape in the area around the magnetic head.

There are two types of tape transport configurations, open loop capstan drive and closed-loop capstan drive. What are two major disadvantages of open-loop capstan drive tape transports?

Description : There are two types of tape transport configurations, open loop capstan drive and closed-loop capstan drive. What are two major disadvantages of open-loop capstan drive tape transports?

Last Answer : a. Only operates in one direction. b. The tape tension and head-to-tape contact can vary.

In a typical velocity servo block diagram what device is placed in the feedback loop that is not present in the position servo?

Description : In a typical velocity servo block diagram what device is placed in the feedback loop that is not present in the position servo?

Last Answer : Tachometer.

Why is it important to initialize the loop control variable for WHILE loops?

Description : Why is it important to initialize the loop control variable for WHILE loops?

Last Answer : Uninitialised variables take on whatever value happens to resideat the memory address to which the variable was allocated at thepoint of instantiation. It is a "garbage value" because we cannotpredict ... loop and ultimately tells us how many characters wereread into the buffer (such that index

What is an auto-associative network? a) a neural network that contains no loops b) a neural network that contains feedback c) a neural network that has only one loop d) a single layer feed-forward neural network with pre-processing

Description : What is an auto-associative network? a) a neural network that contains no loops b) a neural network that contains feedback c) a neural network that has only one loop d) a single layer feed-forward neural network with pre-processing

Last Answer : b) a neural network that contains feedback

An auto-associative network is: a) a neural network that contains no loops b) a neural network that contains feedback c) a neural network that has only one loop d) a single layer feed-forward neural network with pre-processing

Description : An auto-associative network is: a) a neural network that contains no loops b) a neural network that contains feedback c) a neural network that has only one loop d) a single layer feed-forward neural network with pre-processing

Last Answer : b) a neural network that contains feedback

In .............., the bodies of the two loops are merged together to form a single loop provided that they do not make any references to each other. (A) Loop unrolling (B) Strength reduction (C) Loop concatenation (D) Loop jamming

Description : In .............., the bodies of the two loops are merged together to form a single loop provided that they do not make any references to each other. (A) Loop unrolling (B) Strength reduction (C) Loop concatenation (D) Loop jamming

Last Answer : (D) Loop jamming

select the correct response from the choices given in the parentheses. Q-20. In a closed-loop configuration the output signal is determined by (the input signal, the feedback signal, both).

Description : select the correct response from the choices given in the parentheses. Q-20. In a closed-loop configuration the output signal is determined by (the input signal, the feedback signal, both).

Last Answer : Both the input signal and the feedback signal.

What does the term "closed-loop" mean in the closed-loop configuration of an operational amplifier?

Description : What does the term "closed-loop" mean in the closed-loop configuration of an operational amplifier?

Last Answer : The use of degenerative (negative) feed-back

What are the three most common closed-loop capstan drive designs?

Description : What are the three most common closed-loop capstan drive designs?

Last Answer : a. Differential velocity capstans. b. Dual motors dual capstans. c. Peripheral drive capstans.

A typical liquid-cooling system is composed of what loops?

Description : A typical liquid-cooling system is composed of what loops?

Last Answer : Primary and secondary.

On which of the following factors does the sensitivity of a closed loop system to gain changes and load disturbances depend? a) Frequency b) Loop gain c) Forward gain d) All of the mentioned

Description : On which of the following factors does the sensitivity of a closed loop system to gain changes and load disturbances depend? a) Frequency b) Loop gain c) Forward gain d) All of the mentioned

Last Answer : Ans: D

Kirchhoff's current law is applicable to 1. Closed loops in a circuit 2. Junction in a circuit 3. Magnetic circuits ...

Description : Kirchhoff's current law is applicable to 1. Closed loops in a circuit 2. Junction in a circuit 3. Magnetic circuits Which of the above is/are correct ?  (a) 1 only (b) 2 only (c) 3 only (d) 1, 2 and 3

Last Answer : Kirchhoff's current law is applicable to 1. Closed loops in a circuit 2. Junction in a circuit 3. Magnetic circuits Which of the above is/are correct ?  (a) 1 only (b) 2 only (c) 3 only (d) 1, 2 and 3

Name the two current loops in a transistor.

Description : Name the two current loops in a transistor.

Last Answer : The base current loop and the collector current loop

In which system we get feedback? a.Open-loop system b.Machine control system c.Closed-loop system d.None of the above

Description : In which system we get feedback? a.Open-loop system b.Machine control system c.Closed-loop system d.None of the above

Last Answer : c.Closed-loop system

Closed loop and Open loop Control System Advantages and Disadvantages

Description : Closed loop and Open loop Control System Advantages and Disadvantages

Last Answer : Open Loop Control System: Control System in which output quantity has no effect on the input quantity is called Open Loop Control System. Open Loop Control System has no facility to correct automatically the ... in the closed loop system and more care is needed to design a stable closed loop system

Explain Closed loop and Open loop system with sketch.

Description : Explain Closed loop and Open loop system with sketch. 

Last Answer : Closed Loop System: [1] The name indicates that the closed loop control system has a loop that is closed as shown in figure. [2] A feedback device is used for this purpose. This makes ... system is generally used in point-to-point systems where the accuracy requirements are not critical. 

Describe open loop and closed loop system.

Description : Describe open loop and closed loop system.

Last Answer : Open loop and closed loop system: Open system: When the input is independent of the output, the system is called open- loop system. The control action is based on only some ... system is called closed- loop control system. The output is continuously measured and fed to the input. 

Difference between open loop and closed loop control system

Description : Difference between open loop and closed loop control system

Last Answer : Difference between open loop and closed loop control system : Sr No. Open loop control system Closed loop control system  1 Feedback doesn't exists Feedback exists 2 ... and hence costly 9 Highly affected by nonlinearities Reduced effect of non-linearity

Remote sensing techniques make use of the properties of ___________ emitted, reflected or diffracted by the sensed objects: (A) Electric waves (B) Sound waves (C) Electromagnetic waves (D) Wind waves

Description : Remote sensing techniques make use of the properties of ___________ emitted, reflected or diffracted by the sensed objects: (A) Electric waves (B) Sound waves (C) Electromagnetic waves (D) Wind waves

Last Answer : Answer: Option C

The sensed data communicated ___________________. A. Cloud-based servers/storage. B. I/O interfaces. C. Internet connectivity. D. None of the above

Description : The sensed data communicated ___________________. A. Cloud-based servers/storage. B. I/O interfaces. C. Internet connectivity. D. None of the above

Last Answer : A. Cloud-based servers/storage. 

If the load requirement consists of both positive and negative voltages, what technique is used in the voltage divider to supply the loads from a single voltage source?

Description : If the load requirement consists of both positive and negative voltages, what technique is used in the voltage divider to supply the loads from a single voltage source?

Last Answer : The ground (reference point) is placed in the proper point in the voltage divider so that positive and negative voltages are supplied

With reference to NC machines, which of the following statements is wrong a.Both closed-loop and open-loop control systems are used b.Paper tapes, floppy tapes and cassettes are used for data storage c.Digitizers may be used as interactive input devices d.Post processor is an item of hardware

Description : With reference to NC machines, which of the following statements is wrong a.Both closed-loop and open-loop control systems are used b.Paper tapes, floppy tapes and cassettes are used for data storage c.Digitizers may be used as interactive input devices d.Post processor is an item of hardware

Last Answer : c.Digitizers may be used as interactive input devices

Order of the open loop transfer function is_____ to order of closed loop transfer function

Description : Order of the open loop transfer function is _____ to order of closed loop transfer function   (a) not equal (b) equal (c) less than (d) greater than 

Last Answer : Order of the open loop transfer function is equal to order of closed loop transfer function 

An OP amp has an open loop gain of 1,00,000. If the feedback fraction is 0.02, the approximate closed loop...

Description : An OP amp has an open loop gain of 1,00,000. If the feedback fraction is 0.02, the approximate closed loop gain is (a) 1 (b) 1,00,000 (c) 50 (d) 0.02

Last Answer : The closed loop gain Ag = G/(1+G*f) Where G is the open loop gain and f is the feedback fraction  So Ag = 49.975

Basic C programming question about while loops.

Description : Basic C programming question about while loops.

Last Answer : The logic falls out of the loop and continues on…

What characteristic of sound enables a person to distinguish one musical instrument from another, if they are all playing the same note?

Description : What characteristic of sound enables a person to distinguish one musical instrument from another, if they are all playing the same note?

Last Answer : Quality.

A, what logic element enables FF3 to toggle with the clock?

Description : A, what logic element enables FF3 to toggle with the clock?

Last Answer : The AND gate

What method for encoding digital data enables you to store more data in less space by limiting the distance between pulses on a hard disk?

Description : What method for encoding digital data enables you to store more data in less space by limiting the distance between pulses on a hard disk?

Last Answer : Run length-limited (RLL) encoding.

which device prevents the oscillation of the moving system and enables the latter to reach its final position quickly?

Last Answer : A damping device prevents the oscillation of the moving system and enables the latter to reach its final position quickly.

Loops of Henle present in

Description : Loops of Henle present in

Last Answer : Loops of Henle present in A. Cortex B. Medulla C. Pelvis D. Ureter

What are the terms used to describe an open or closed telegraph circuit?

Description : What are the terms used to describe an open or closed telegraph circuit?

Last Answer : Space and mark.

The alarm system for an engine order telegraph uses small selsyn motors attached to the indicators. The alarm sounds when the rotors are _____________. A. in synchronous position, no current is flowing, and the relays are open B. in synchronous position, no current is flowing, and the relays are closed C. not synchronized, current is flowing, and the relays are open D. not synchronized, current is flowing, and the relays are closed

Description : The alarm system for an engine order telegraph uses small selsyn motors attached to the indicators. The alarm sounds when the rotors are _____________. A. in synchronous position, no current is flowing, ... and the relays are open D. not synchronized, current is flowing, and the relays are closed

Last Answer : Answer: D

The output of the sum point must contain information that controls what two factors of load movement in a position servo?

Description : The output of the sum point must contain information that controls what two factors of load movement in a position servo?

Last Answer : Amount and direction of rotation.

If fuse 'F-1' in the illustrated schematic diagram opens, ____________. EL-0017 A. the motor will run slowly B. 'A-1' and 'A-2' will open C. the motor will not start D. the start button will jam in the closed position

Description : If fuse 'F-1' in the illustrated schematic diagram opens, ____________. EL-0017 A. the motor will run slowly B. 'A-1' and 'A-2' will open C. the motor will not start D. the start button will jam in the closed position

Last Answer : Answer: C

If a circuit breaker that utilizes built-in, current limiting fuses (CLF's) cannot be closed, the problem may be traced to __________. A. a blown CLF plunger holding the trip bar in the open position B. a missing CLF C. a misaligned limiter housing assembly D. all of the above

Description : If a circuit breaker that utilizes built-in, current limiting fuses (CLF's) cannot be closed, the problem may be traced to __________. A. a blown CLF plunger holding the trip bar in the open position B. a missing CLF C. a misaligned limiter housing assembly D. all of the above

Last Answer : Answer: D

When 'selector switch' 'SEL8' shown in the illustration is in the 'TEST' position, contacts '3,4' and '7,8' are respectively ____________. EL-0100 A. open; closed B. closed; open C. open; open D. closed; closed

Description : When 'selector switch' 'SEL8' shown in the illustration is in the 'TEST' position, contacts '3,4' and '7,8' are respectively ____________. EL-0100 A. open; closed B. closed; open C. open; open D. closed; closed

Last Answer : Answer: B

When 'selector switch' 'SEL8' shown in the illustration is in the 'OFF' position, contacts '3,4' and '7,8' are respectively ____________. EL-0100 A. open; closed B. closed; open C. open; open D. closed; closed

Description : When 'selector switch' 'SEL8' shown in the illustration is in the 'OFF' position, contacts '3,4' and '7,8' are respectively ____________. EL-0100 A. open; closed B. closed; open C. open; open D. closed; closed

Last Answer : Answer: A

When 'selector switch' 'SEL8' shown in the illustration is in the 'ON' position, contacts '3,4' and '7,8' are respectively ______________. EL-0100 A. open; closed B. closed; open C. open; open D. closed; closed

Description : When 'selector switch' 'SEL8' shown in the illustration is in the 'ON' position, contacts '3,4' and '7,8' are respectively ______________. EL-0100 A. open; closed B. closed; open C. open; open D. closed; closed

Last Answer : Answer: D

As shown in the illustration, what happens when 'A' is closed, 'B' is in position '2' and component 'E2' burns out? EL-0058 A. 'H' energizes and 'D' makes contact. B. 'F' goes out allowing 'G' to disconnect. C. 'G' sounds an alarm and 'F' illuminates. D. 'C' opens causing 'A' to also open.

Description : As shown in the illustration, what happens when 'A' is closed, 'B' is in position '2' and component 'E2' burns out? EL-0058 A. 'H' energizes and 'D' makes contact. B. 'F' goes out allowing 'G' to disconnect. C. 'G' sounds an alarm and 'F' illuminates. D. 'C' opens causing 'A' to also open.

Last Answer : Answer: C

Which of the following statements is correct for any closed loop system ? (a) All the co-efficients can have zero value (6) All the co-efficients are always non-zero (c) Only one of the static error co-efficients has a finite non-zero value (d) None of the above

Description : Which of the following statements is correct for any closed loop system ? (a) All the co-efficients can have zero value (6) All the co-efficients are always non-zero (c) Only one of the static error co-efficients has a finite non-zero value (d) None of the above

Last Answer : Ans: C

With the help of block diagram explain closed loop control CNC system.

Description : With the help of block diagram explain closed loop control CNC system. 

Last Answer : Special motors called servos are used for executing machine movements in closed loop system. The name indicates that the closed loop control system has a loop that is closed as shown in fig. ... to the drive unit and the cycle repeats until there is no error signal from the comparator.

The characteristic equation for a closed loop system with forward gain K is s4 + 4s3 + 8s2 + 6s + K = 0.

Description : The characteristic equation for a closed loop system with forward gain K is s4 + 4s3 + 8s2 + 6s + K = 0. The critical gain value Kc for stability should not exceed  (a) 3.25 (b) 9.75 (c) 13.0 (d) 23.3

Last Answer : The characteristic equation for a closed loop system with forward gain K is s4 + 4s3 + 8s2 + 6s + K = 0. The critical gain value Kc for stability should not exceed  (a) 3.25 (b) 9.75 (c) 13.0 (d) 23.3

Negative feedback in a closed-loop control system DOES NOT

Description : Negative feedback in a closed-loop control system DOES NOT (A) reduce the overall gain (B) reduce bandwidth (C) improve disturbance rejection (D) reduce sensitivity to parameter variation

Last Answer : Negative feedback in a closed-loop control system DOES NOT reduce bandwidth

In a closed loop control system ...

Description : In a closed loop control system  (a) control action depends upon the output and also on the input command (b) output signal is fed back to be compared with the reference signal (c) the accuracy is better than in the open loop system (d) all of the above

Last Answer : In a closed loop control system control action depends upon the output and also on the input command , output signal is fed back to be compared with the reference signal , the accuracy is better than in the open loop system.