Rigid suspension system?

Rigid suspension system?
by

1 Answer

Answer :

A rigid axle suspension is simply the just opposite of an independent suspension. These type of suspensions are dependent  to adjacent wheel of a vehicle. In a rigid or solid suspension a beam or shaft is commonly connected wheels on both sides. Hence when one wheel is hitted on a bump or pothole the other wheel is also affected. This is an old kind of suspension as almost all new generation vehicles are using an independent suspension. An independent suspension has an independent system to each wheel of a vehicle.
by

Related questions

The statement the resultant of the external forces applied to a body (rigid or non-rigid) composed of a system of particles is equivalent to the vector summation of the effective forces acting on all particles-is known as a.Corollary to Newton's laws of motion b.Principle of dynamics c.D' Alembert's principle d.Nowton's law e.Mohr's principle

Description : The statement the resultant of the external forces applied to a body (rigid or non-rigid) composed of a system of particles is equivalent to the vector summation of the effective forces acting on all ... motion b.Principle of dynamics c.D' Alembert's principle d.Nowton's law e.Mohr's principle

Last Answer : c. D' Alembert's principle

Explain the major factors responsible for the rigid caste system disappearing from India. -SST 10th

Description : Explain the major factors responsible for the rigid caste system disappearing from India. -SST 10th

Last Answer : (i) Social reformers like Gandhi, Jyotiba Phule, B.R. Ambedkar and Ramaswami Naickar have worked hard for a society free of caste inequalities. (ii) Literacy, education, occupational mobility and ... spread in every group to every caste. (vi) Inter-caste marriages can also remove caste barriers

A system having a rigid boundary that energy, work and mass does not cross its boundaries  a. Specific Heat  b. Specific Gravity  c. Isolated System  d. Enthalpy

Description : A system having a rigid boundary that energy, work and mass does not cross its boundaries  a. Specific Heat  b. Specific Gravity  c. Isolated System  d. Enthalpy

Last Answer : Isolated System

A vehicle suspension system consists of a spring and a damper. Stiffness of spring is 3.5 KN/m and damping constant of damper is 400Ns/m. If mass is 50 kg, then damping factor is A 0.606 B 0.10 C 0.666 D 0.471

Description : A vehicle suspension system consists of a spring and a damper. Stiffness of spring is 3.5 KN/m and damping constant of damper is 400Ns/m. If mass is 50 kg, then damping factor is A 0.606 B 0.10 C 0.666 D 0.471

Last Answer : D 0.471

A vehicle suspension system consists of a spring and a damper. The stiffness of the spring is 3.6 kN/m and the damping constant of the damper is 400 Ns/m. If the mass is 50 kg, then the damping factor (d ) and damped natural frequency (f n ), respectively, are a) 0.471 and 1.19 Hz b) 0.471 and 7.48 Hz c) 0.666 and 1.35 Hz

Description : A vehicle suspension system consists of a spring and a damper. The stiffness of the spring is 3.6 kN/m and the damping constant of the damper is 400 Ns/m. If the mass is 50 kg, then the damping factor (d ) and damped natural ... , are a) 0.471 and 1.19 Hz b) 0.471 and 7.48 Hz c) 0.666 and 1.35 Hz

Last Answer : a) 0.471 and 1.19 Hz

A vehicle suspension system consists of a spring and a damper. The stiffness of the spring is 3.6 kN/m and the damping constant of the damper is 400 Ns/m. If the mass is 50 kg, then the damping factor (d ) and damped natural frequency (f n ), respectively, are a) 0.471 and 1.19 Hz b) 0.471 and 7.48 Hz c) 0.666 and 1.35 Hz d) 0.666 and 8.50 Hz

Description : A vehicle suspension system consists of a spring and a damper. The stiffness of the spring is 3.6 kN/m and the damping constant of the damper is 400 Ns/m. If the mass is 50 kg, then the damping factor (d ) and damped natural ... .19 Hz b) 0.471 and 7.48 Hz c) 0.666 and 1.35 Hz d) 0.666 and 8.50 Hz

Last Answer : a) 0.471 and 1.19 Hz

In disc brake, the disc is attached to the (A) wheel (B) axle (C) suspension system (D) none of the above

Description : In disc brake, the disc is attached to the (A) wheel (B) axle (C) suspension system (D) none of the above

Last Answer : (B) axle

With a leaf spring type of suspension, interference between steering and suspension system can be (a) front end of the spring is pin joined and the rear end is shackled (b) front end of the spring is shackled and the rear end is pin joined (c) both end of the spring are shackled (d) both end of the spring are pin joined

Description : With a leaf spring type of suspension, interference between steering and suspension system can be (a) front end of the spring is pin joined and the rear end is shackled (b) front end of the spring is ... joined (c) both end of the spring are shackled (d) both end of the spring are pin joined

Last Answer : (b) front end of the spring is shackled and the rear end is pin joined

Describe mono-shock regular swing arm suspension system with neat sketch.

Description : Describe mono-shock regular swing arm suspension system with neat sketch.

Last Answer : Mono-shock Regular swing arm : Original technology of mono-shock comes from the racing world where motor cycles compete in most extreme conditions. More advanced version of this technology is employed in these ... only one shock to adjust, and there is no worry about matching two shocks.   

(i) Give the detail classification of suspension system. (ii) State the necessity of suspension system.

Description : (i) Give the detail classification of suspension system. (ii) State the necessity of suspension system. 

Last Answer : i) Classification of suspension system. 1. Rigid suspension system 2. Independent suspension system a. Wishbone type parallel link type b. Mac pherson strut type c. Vertical guide type d. Trailing ... of vehicle while in motion. 4) To maintain the road wheels in contact with road surface.

State one application each for technically feasible LEM propelled transport system based on suspension used (any four).

Description : State one application each for technically feasible LEM propelled transport system based on suspension used (any four). 

Last Answer : Ans: 1) Steel wheel on steel rail --- surface transportation 2) Rubber wheel on road --- surface transportation 3) Flat surface on water --- crossing rivers 4) Levitation --- wheel less travel along pre-defined routs 

Professors or University people... would you say what you teach/learn is very rigid and directed or do you think it's fair and open?

Description : Professors or University people... would you say what you teach/learn is very rigid and directed or do you think it's fair and open?

Last Answer : I think its rigid, but its what I need to be taught. Then again, I am an engineer, which may be different from other majors.

In the workplace, is a rigid dress code close enough to a uniform?

Description : In the workplace, is a rigid dress code close enough to a uniform?

Last Answer : Yes. But my opinion and three dollars will buy you a latte at Starbucks.

In penalty approach, rigid support is considered as a spring having stiffness. a.zero b.very small c.very large d.infinite

Description : In penalty approach, rigid support is considered as a spring having stiffness. a.zero b.very small c.very large d.infinite

Last Answer : d.infinite

-------is a rigid body transformation that moves objects without deformation. a.Rotation b.Scaling c.Translation d.All of the mentioned

Description : -------is a rigid body transformation that moves objects without deformation. a.Rotation b.Scaling c.Translation d.All of the mentioned

Last Answer : c.Translation

A rigid body is suspended vertically at a point and oscillates with a small amplitude under the action of the force of gravity. Such an arrangement is called a.Simple pendulum b.Rigid pendulum c.Second's pendulum d.Compound pendulum e.Newton's pendulum

Description : A rigid body is suspended vertically at a point and oscillates with a small amplitude under the action of the force of gravity. Such an arrangement is called a.Simple pendulum b.Rigid pendulum c.Second's pendulum d.Compound pendulum e.Newton's pendulum

Last Answer : d. Compound pendulum

The locus of instantaneous centre of a moving rigid body a.Epicycloid b.Straight line c.Involute d.Cycloid e.Centrode

Description : The locus of instantaneous centre of a moving rigid body a.Epicycloid b.Straight line c.Involute d.Cycloid e.Centrode

Last Answer : e. Centrode

A rigid body is in equilibrium under the action of these forces when a.These forces are equal b.The lines of action of these forces are parallel c.The lines of action of these forces meet in a point d.(A) and (B) above e.(B) and (C) above

Description : A rigid body is in equilibrium under the action of these forces when a.These forces are equal b.The lines of action of these forces are parallel c.The lines of action of these forces meet in a point d.(A) and (B) above e.(B) and (C) above

Last Answer : e. (B) and (C) above

If three non-parallel forces hold a rigid body in equilibrium, they must a.be non-coneurrent b.be colinear c.107 dynes d.be equal in magnitude e.be concurrent

Description : If three non-parallel forces hold a rigid body in equilibrium, they must a.be non-coneurrent b.be colinear c.107 dynes d.be equal in magnitude e.be concurrent

Last Answer : e. be concurrent

A rigid square plate ABCD of unit side rotates in its own plane about the middle-point of CD until the new position of A coincides with -Maths 9th

Description : A rigid square plate ABCD of unit side rotates in its own plane about the middle-point of CD until the new position of A coincides with -Maths 9th

Last Answer : answer:

Find the work done is calorie when `65.5g` Zn reacts with excess `H_(2)SO_(4)` (aq) to form `ZnSO_(4)` & `H_(2)` in a closed rigid vessel at `300 K`.

Description : Find the work done is calorie when `65.5g` Zn reacts with excess `H_(2)SO_(4)` (aq) to form `ZnSO_(4)` & `H_(2)` in a closed rigid vessel at `300 K`.

Last Answer : Find the work done is calorie when `65.5g` Zn reacts with excess `H_(2)SO_(4)` (aq) to form `ZnSO_(4)` & `H_ ... `. A. -600 B. 0 C. `-1200` D. `-2494`

Comprehension # 1 Many lyophilic sols and few lyophobic sols when coagulated under some special conditions changes into semi rigid mass, enclosing who

Description : Comprehension # 1 Many lyophilic sols and few lyophobic sols when coagulated under some special conditions changes into semi rigid mass, enclosing who

Last Answer : Comprehension # 1 Many lyophilic sols and few lyophobic sols when coagulated under some special ... . thixotropy C. double decompostion D. peptization

Comprehension # 1 Many lyophilic sols and few lyophobic sols when coagulated under some special conditions changes into semi rigid mass, enclosing who

Description : Comprehension # 1 Many lyophilic sols and few lyophobic sols when coagulated under some special conditions changes into semi rigid mass, enclosing who

Last Answer : Comprehension # 1 Many lyophilic sols and few lyophobic sols when coagulated under some special ... B. synersis C. coagulation D. thixotropy

Comprehension # 1 Many lyophilic sols and few lyophobic sols when coagulated under some special conditions changes into semi rigid mass, enclosing who

Description : Comprehension # 1 Many lyophilic sols and few lyophobic sols when coagulated under some special conditions changes into semi rigid mass, enclosing who

Last Answer : Comprehension # 1 Many lyophilic sols and few lyophobic sols when coagulated under some special conditions ... Calcium acetate C. Hair gel D. Cheese

Assertion: Cartilage and bone are rigid connective tissues. Reason: Blood is a connective tissue.

Description : Assertion: Cartilage and bone are rigid connective tissues. Reason: Blood is a connective tissue.

Last Answer : Assertion: Cartilage and bone are rigid connective tissues. Reason: Blood is a connective tissue. A. If ... D. If both Assertion & Reason are false.

What is Young’s modulus of a rigid body?

Description : What is Young’s modulus of a rigid body?

Last Answer : What is Young’s modulus of a rigid body?

Who makes rigid tools?

Description : Who makes rigid tools?

Last Answer : The Ridge Tool Company and the "Ridgid" brand are owned byEmerson Electric Company. In 2003, Emerson Electric licensed OneWorld Technologies (OWT) to manufacture Ridgid bench top andstationary woodworking ... g., grinders, hammer drills, and jigsaw) were manufacturedat the Metabo factory in Germany.

What cell part is rigid an outer layer?

Description : What cell part is rigid an outer layer?

Last Answer : A cell wall, usually found in plant cells, is rigid.

Is there rigid motion when you flip a pancake?

Description : Is there rigid motion when you flip a pancake?

Last Answer : Feel Free to Answer

If a moving a clocks minute hand a rigid motion?

Description : If a moving a clocks minute hand a rigid motion?

Last Answer : What is the answer ?

What layers form Earth's rigid mobile tectonic plates?

Description : What layers form Earth's rigid mobile tectonic plates?

Last Answer : The lithosphere.

What happen if too much gas is pumped into a sealed rigid container?

Description : What happen if too much gas is pumped into a sealed rigid container?

Last Answer : Well, if it is a sealed rigid container and too much gas is pumped in the pressure inside the container might exceed the pressure rating of the sealed container. The tensile stress caused by the high pressure inside the tank will cause it to rupture.

Where can I order custom (preferably matte) printed professional, luxury (rip-tab) hard/rigid mailer/envelopes in low quantities?

Description : Where can I order custom (preferably matte) printed professional, luxury (rip-tab) hard/rigid mailer/envelopes in low quantities?

Last Answer : We give life to your ideas when you tell them to us! We help you to give your packages get skillfully printed by the hands of specialists. As our motto is “more than just ink on paper,” ... with the new trends of the market.Various options for customization are given to our clients. We think

Prior to Commodore Perry's visit, the country of Japan had held a rigid policy of isolation since the _______.?

Description : Prior to Commodore Perry's visit, the country of Japan had held a rigid policy of isolation since the _______.?

Last Answer : 1600s

As compared to diskettes, the hard disks are A) More expensive B) More portable C) Less rigid D) Slowly accessed

Description : As compared to diskettes, the hard disks are A) More expensive B) More portable C) Less rigid D) Slowly accessed

Last Answer : Answer : A

Which of the following statement is correct about membrane cholesterol? (A) The hydroxyl group is located near the centre of the lipid layer (B) Most of the cholesterol is in the form of a cholesterol ester (C) The steroid nucleus form forms a rigid, planar structure (D) The hydrocarbon chain of cholesterol projects into the extracellular fluid

Description : Which of the following statement is correct about membrane cholesterol? (A) The hydroxyl group is located near the centre of the lipid layer (B) Most of the cholesterol is in the form ... forms a rigid, planar structure (D) The hydrocarbon chain of cholesterol projects into the extracellular fluid

Last Answer : C

What is the external rigid carapace of arthropods called? Of which substance is it made? Which type of organic molecule is that substance?

Description : What is the external rigid carapace of arthropods called? Of which substance is it made? Which type of organic molecule is that substance?

Last Answer : The external carapace of arthropods is called exoskeleton. The arthropod exoskeleton is made of chitin, a nitrogen-containing polysaccharide. Phylum Arthropoda - Image Diversity: exoskeleton

Indian Constitution is - (1) Rigid (2) Flexible (3) Neither rigid nor flexible (4) Partly rigid and partly flexible

Description : Indian Constitution is - (1) Rigid (2) Flexible (3) Neither rigid nor flexible (4) Partly rigid and partly flexible

Last Answer : (3) Neither rigid nor flexible Explanation: Indian constitution is neither rigid nor flexible.

Government is classified as parliamentary and presidential on the basis of which of the following? (1) Relations between legislature and executive (2) Relations between politician and civil servants (3) Written or unwritten Constitutions (4) Rigid or Flexible Constitutions

Description : Government is classified as parliamentary and presidential on the basis of which of the following? (1) Relations between legislature and executive (2) Relations between politician and civil servants (3) Written or unwritten Constitutions (4) Rigid or Flexible Constitutions

Last Answer : (1) Relations between legislature and executive Explanation: Government is classified as parliamentary and presidential on the basis of relations between legislatures and executive.

The area which is resistant to any massive structural transformation is called – (1) rigid mass (2) ancient landmass (3) tectonic plate (4) shield

Description : The area which is resistant to any massive structural transformation is called – (1) rigid mass (2) ancient landmass (3) tectonic plate (4) shield

Last Answer : (4) shield Explanation: A shield is generally a large area of exposed Precambrian crystalline igneous and high-grade metamorphic rocks that form tectonically stable areas. They are resistant to geological structural transformation. They are normally the nucleus of continents.

Which of the following is considered the most frequently used transmission line? A. Two-wire open line B. Twin lead C. Rigid coaxial line D. Flexible coaxial line

Description : Which of the following is considered the most frequently used transmission line? A. Two-wire open line B. Twin lead C. Rigid coaxial line D. Flexible coaxial line

Last Answer : D. Flexible coaxial line

Thermocol is a spongy, porous, rigid or flexible foamed plastic, obtained by blowing gas/air through molten (A) Saturated polyester (B) Polyurethane (C) Polystyrene (D) Either (B) or (C)

Description : Thermocol is a spongy, porous, rigid or flexible foamed plastic, obtained by blowing gas/air through molten (A) Saturated polyester (B) Polyurethane (C) Polystyrene (D) Either (B) or (C)

Last Answer : (D) Either (B) or (C)

Acrylonitrile-butadiene-styrene (ABS) copolymer, which is produced by blending styrene-acrylonitrile copolymer with butadiene based elastomer, is a/an (A) Rigid foam (B) Engineering plastic (C) Thermosetting polymer

Description : Acrylonitrile-butadiene-styrene (ABS) copolymer, which is produced by blending styrene-acrylonitrile copolymer with butadiene based elastomer, is a/an (A) Rigid foam (B) Engineering plastic (C) Thermosetting polymer

Last Answer : (B) Engineering plastic

The sound heard after reflection from a rigid surface is called an

Description : The sound heard after reflection from a rigid surface is called an

Last Answer : echo.

Spiral spring is quite rigid. a) Yes b) No it is flexible c) It is of moderate rigidity d) Rigidity can’t be determined

Description : Spiral spring is quite rigid. a) Yes b) No it is flexible c) It is of moderate rigidity d) Rigidity can’t be determined

Last Answer : b) No it is flexible

Welded joints are a. Hinged joint b. Rigid joint c. Freely supported joint

Description : Welded joints are a. Hinged joint b. Rigid joint c. Freely supported joint

Last Answer : b. Rigid joint

Which of the following statements are true about eccentrically loaded circular base? a) All bolts are symmetrically spaced with equal angle on either side of vertical b) Bolts are not preloaded c) Bearing is rigid d) Dowel pins are used to relieve stresses

Description : Which of the following statements are true about eccentrically loaded circular base? a) All bolts are symmetrically spaced with equal angle on either side of vertical b) Bolts are not preloaded c) Bearing is rigid d) Dowel pins are used to relieve stresses

Last Answer : a) All bolts are symmetrically spaced with equal angle on either side of vertical

Find the shear stress in a flange at the junction of hub in rigid flanged coupling if torsional moment is 2980N-m and diameter of hub being 125mm. Also the thickness of flange is 25mm. a) 6.77N/mm2 b) 10.24N/mm2 c) 4.84N/mm2 d) 4.22N/mm2

Description : Find the shear stress in a flange at the junction of hub in rigid flanged coupling if torsional moment is 2980N-m and diameter of hub being 125mm. Also the thickness of flange is 25mm. a) 6.77N/mm2 b) 10.24N/mm2 c) 4.84N/mm2 d) 4.22N/mm2

Last Answer : c) 4.84N/mm2

If shaft diameter is 60mm, how many bolts are recommended for rigid flange coupling? a) 2 b) 3 c) 4 d) 5

Description : If shaft diameter is 60mm, how many bolts are recommended for rigid flange coupling? a) 2 b) 3 c) 4 d) 5

Last Answer : c) 4

Power is transmitted by only in rigid flange coupling. a) True b) False

Description : Power is transmitted by only in rigid flange coupling. a) True b) False

Last Answer : b) False