When the initial conditions of a system are specified to be zero it implies that the system is

When the initial conditions of a system are specified to be zero it implies that the system is?

by

1 Answer

Answer :

When the initial conditions of a system are specified to be zero it implies that the system is at rest but stores energy.

by

Related questions

In a system zero initial condition means that?

Description : In a system zero initial condition means that?

Last Answer : In a system zero initial condition means that The system is at rest and no energy is stored in any of its components.

Zero initial condition for a system means?

Description : Zero initial condition for a system means?

Last Answer : Zero initial condition for a system means system is at rest and no energy is stored in any of its components.

Regenerative feedback implies feedback with?

Description : Regenerative feedback implies feedback with?

Last Answer : Regenerative feedback implies feedback with a positive sign.

After drawing the Root-Locus, the closed-loop poles corresponding to a specified value of gain K can be

Description : After drawing the Root-Locus, the closed-loop poles corresponding to a specified value of gain K can be determined from which of the following criterion ? (A) Magnitude criterion alone (B) Angle criterion alone (C) Both Magnitude and Angle criteria (D) Angle of departure and angle of arrival.

Last Answer : After drawing the Root-Locus, the closed-loop poles corresponding to a specified value of gain K can be determined from which of the following criterion ? (A) Magnitude criterion alone (B) Angle ... (C) Both Magnitude and Angle criteria (D) Angle of departure and angle of arrival.

Vygotsky theory implies Options: A) child will learn best in the company of children having IQ lesser than his/her own. B) collaborative problem solving C) individual assignments to each student D) after initial explanation, do not support a child in solving difficult questions

Description : Vygotsky theory implies Options: A) child will learn best in the company of children having IQ lesser than his/her own. B) collaborative problem solving C) individual assignments to each student D) after initial explanation, do not support a child in solving difficult questions

Last Answer : B) collaborative problem solving 

Generality is the measure of _____________ a) Ease with which the method can be adapted to different domains of application b) The average time required to construct the target knowledge structures from some specified initial structures c) A learning system to function with unreliable feedback and with a variety of training examples d) The overall power of the system

Description : Generality is the measure of _____________ a) Ease with which the method can be adapted to different domains of application b) The average time required to construct the target knowledge structures ... unreliable feedback and with a variety of training examples d) The overall power of the system

Last Answer : a) Ease with which the method can be adapted to different domains of application

A unit step voltage is applied at t = 0 to a series RL circuit with zero initial conditions

Description : A unit step voltage is applied at t = 0 to a series RL circuit with zero initial conditions  A) It is possible for the current to be oscillatory B) The voltage across the resistor at t ... The energy stored in the inductor in the steady state is zero D) Theresistor current eventually falls to zero 

Last Answer : A

An inductor at t = 0+ with zero initial conditions acts as

Description : An inductor at t = 0+ with zero initial conditions acts as   (a) short circuit (b) open circuit (c) current source (d) voltage source 

Last Answer : short circuit, because as time goes an indicator gains low resistance to steady voltage

The initial response when the output is not equal to input is called?

Description : The initial response when the output is not equal to input is called?

Last Answer : The initial response when the output is not equal to input is called Transient response.

An astronaut inside a spacecraft is in a state of weightlessness. This implies that A. The mass of the astronaut is reduced to zero B. Gravity inside the spacecraft ceases to act C. The astronaut is outside the D. The astronaut and the spacecraft are both in a free-falling state

Description : An astronaut inside a spacecraft is in a state of weightlessness. This implies that A. The mass of the astronaut is reduced to zero B. Gravity inside the spacecraft ceases to act C. The astronaut is outside the D. The astronaut and the spacecraft are both in a free-falling state

Last Answer : ANSWER: D

Zero permeability/permittivity implies which state? a) No ions are allowed in the medium b) No current is generated in the medium c) No magnetic or electric energy is permitted in the medium d) No resistivity

Description : Zero permeability/permittivity implies which state? a) No ions are allowed in the medium b) No current is generated in the medium c) No magnetic or electric energy is permitted in the medium d) No resistivity

Last Answer : c) No magnetic or electric energy is permitted in the medium

One dimensional fluid flow implies the (A) Flow in straight lines only (B) Uniform flow (C) Steady uniform flow (D) Flow in which transverse components are zero

Description : One dimensional fluid flow implies the (A) Flow in straight lines only (B) Uniform flow (C) Steady uniform flow (D) Flow in which transverse components are zero

Last Answer : (D) Flow in which transverse components are zero

A double rule applied to accounts in the ledger during the closing process implies that a. the account is an income statement account. b. the account is a balance sheet account. c. the account balance is not zero. d. a mistake has been made, since double ruling is prescribed.

Description : A double rule applied to accounts in the ledger during the closing process implies that a. the account is an income statement account. b. the account is a balance sheet account. c. the account balance is not zero. d. a mistake has been made, since double ruling is prescribed.

Last Answer : a. the account is an income statement account.

In order to regulate steady state error to zero, in a negative feedback control system, one employs

Description : In order to regulate steady state error to zero, in a negative feedback control system, one employs

Last Answer : In order to regulate steady state error to zero, in a negative feedback control system, one employs Integral control

The driving point impedance with poles at ω = 0(zero) and ω = ∞ (infinity) must have the

Description : The driving point impedance with poles at ω = 0(zero) and ω = ∞ (infinity) must have the  (a) s term in the denominator and an excess term in the numerator (b) s term in the ... the numerator and denominator (d) s term in the denominator and equal number of terms in the numerator and denominator

Last Answer : The driving point impedance with poles at ω = 0(zero) and ω = ∞ (infinity) must have the s term in the denominator and an excess term in the numerator

Which of the following is not a function of the Board of Accountancy as specified in the Philippine Accountancy Act of 2004? a. To investigate violations of the Accountancy Law and the rules and regulations promulgated therewith. b. To look from time to time into the conditions affecting the practice of the accountancy profession. c. To create and direct accrediting agencies that are entrusted the functions of reviewing higher educational institutions' policies and practices leading to accreditation/reaccreditation of BSA program. d. To determine and prescribe minimum requirements leading to the admission of candidates to the CPA licensure examination

Description : Which of the following is not a function of the Board of Accountancy as specified in the Philippine Accountancy Act of 2004? a. To investigate violations of the Accountancy Law ... determine and prescribe minimum requirements leading to the admission of candidates to the CPA licensure examination

Last Answer : To create and direct accrediting agencies that are entrusted the functions of reviewing higher educational institutions' policies and practices leading to accreditation/reaccreditation of BSA program.

A space time of 3 hours for a flow reactor means that (A) The time required to process one reactor volume of feed (measured at specified conditions) is 3 hours (B) Three reactor volumes of feed can be processed every hour (C) It takes three hours to dump the entire volume of the reactor with feed (D) Conversion is cent per cent after three hours

Description : A space time of 3 hours for a flow reactor means that (A) The time required to process one reactor volume of feed (measured at specified conditions) is 3 hours (B) Three reactor volumes of feed ... to dump the entire volume of the reactor with feed (D) Conversion is cent per cent after three hours

Last Answer : (A) The time required to process one reactor volume of feed (measured at specified conditions) is 3 hours

A space velocity of 5 hr -1 means that (A) Five reactor volumes of feed (at specified conditions) are being fed into the reactor per hour (B) After every 5 hours, reactor is being filled with the feed (C) Cent per cent conversion can be achieved in at least 5 hours (D) A fixed conversion of a given batch of feed takes 5 hours

Description : A space velocity of 5 hr -1 means that (A) Five reactor volumes of feed (at specified conditions) are being fed into the reactor per hour (B) After every 5 hours, reactor is being filled with the feed ... be achieved in at least 5 hours (D) A fixed conversion of a given batch of feed takes 5 hours

Last Answer : (A) Five reactor volumes of feed (at specified conditions) are being fed into the reactor per hour

Pick out the wrong statement pertaining to space velocity of flow reactors. (A) The unit of space velocity is (time) -1 (B) The space velocity of 3 hr -1 means that three reactor volumes of feed at specified conditions are being fed into the reactor every hour (C) The space velocity of 3 hr -1 means that one third reactor volume of feed at specified conditions are being fed into the reactor (D) None of these

Description : Pick out the wrong statement pertaining to space velocity of flow reactors. (A) The unit of space velocity is (time) -1 (B) The space velocity of 3 hr -1 means that three reactor volumes of ... one third reactor volume of feed at specified conditions are being fed into the reactor (D) None of these

Last Answer : (C) The space velocity of 3 hr -1 means that one third reactor volume of feed at specified conditions are being fed into the reactor

Where are icing conditions on route specified? a. TAF and METAR b. METAR and SIGMET c. SWC (sig. weather chart) and SIGMET d. SPECI and TREND

Description : Where are icing conditions on route specified? a. TAF and METAR  b. METAR and SIGMET  c. SWC (sig. weather chart) and SIGMET  d. SPECI and TREND

Last Answer : c. SWC (sig. weather chart) and SIGMET 

Where are icing conditions on route specified? a. TAF and METAR b. METAR and SIGMET c. SWC (sig. weather chart) and SIGMET d. SPECI and TREND

Description : Where are icing conditions on route specified? a. TAF and METAR b. METAR and SIGMET c. SWC (sig. weather chart) and SIGMET d. SPECI and TREND

Last Answer : c. SWC (sig. weather chart) and SIGMET

Strategic planning: (a) Addresses the organization's basic mission or business, issuing broad statements of purpose or direction that have a long lead time. (b) Involves managers in each unit of an organization who are responsible for achieving the unit's objectives within a specified period of time. (c) Looks specifically at resources, finances, and market conditions to determine ways to accomplish the overall plans of the organization. (d) Determines the day-to-day operations within an organization.

Description : Strategic planning: (a) Addresses the organization's basic mission or business, issuing broad statements of purpose or direction that have a long lead time. (b) Involves managers in each unit of ... overall plans of the organization. (d) Determines the day-to-day operations within an organization.

Last Answer : (a) Addresses the organization's basic mission or business, issuing broad statements of purpose or direction that have a long lead time.

Transition curves are introduced at either end of a circular curve, to obtain (A) Gradually decrease of curvature from zero at the tangent point to the specified quantity at the junction of the transition curve with main curve (B) Gradual increase of super-elevation from zero at the tangent point to the specified amount at the junction of the transition curve with main curve (C) Gradual change of gradient from zero at the tangent point to the specified amount at the junction of the transition curve with main curve (D) None of these

Description : Transition curves are introduced at either end of a circular curve, to obtain (A) Gradually decrease of curvature from zero at the tangent point to the specified quantity at the junction of the ... specified amount at the junction of the transition curve with main curve (D) None of these

Last Answer : (B) Gradual increase of super-elevation from zero at the tangent point to the specified amount at the junction of the transition curve with main curve

Pick up the correct statement from the following: (A) Phase of a wave is expressed as a fraction of a period with respect to a reference (B) Phase is usually specified by angular measure with one period being 360° (C) The reference for finding the phase of a wave is taken from the previous passage through zero from the negative to the positive direction (D) All of these

Description : Pick up the correct statement from the following: (A) Phase of a wave is expressed as a fraction of a period with respect to a reference (B) Phase is usually specified by angular measure with ... from the previous passage through zero from the negative to the positive direction (D) All of these

Last Answer : Answer: Option D

If a system after undergoing a series of processes, returns to the initial state then  (a) process is thermodynamically in equilibrium  (b) process is executed in closed system cycle  (c) its entropy will change due to irreversibility  (d) sum of heat and work transfer will be zero  (e) no work will be done by the system.

Description : If a system after undergoing a series of processes, returns to the initial state then  (a) process is thermodynamically in equilibrium  (b) process is executed in closed system cycle  (c) its entropy will ... sum of heat and work transfer will be zero  (e) no work will be done by the system.

Last Answer : Answer : d

At equilibrium the concentration of water in vapour phase (C* ) in kg/m3 of air space and the amount of water (m) adsorbed per kg of dry silica gel are related by, C* = 0.0667m. To maintain dry conditions in a room of air space 100m3 containing 2.2 kg of water vapour initially, 10 kg of dry silica gel is kept in the room. The fraction of initial water remaining in the air space after a long time (during which the temperature is maintained constant) is (A) 0.0 (B) 0.2 (C) 0.4 (D) 1.0

Description : At equilibrium the concentration of water in vapour phase (C* ) in kg/m3 of air space and the amount of water (m) adsorbed per kg of dry silica gel are related by, C* = 0.0667m. To maintain dry conditions in a room ... which the temperature is maintained constant) is (A) 0.0 (B) 0.2 (C) 0.4 (D) 1.0

Last Answer : (C) 0.4

“The enthalpy change for any chemical reaction is independent of the intermediate stages, provided the initial and final conditions are the same for each route.” This statement is known as:

Description : “The enthalpy change for any chemical reaction is independent of the intermediate stages, provided the initial and final conditions are the same for each route.” This statement is known as:  A. Dulong’s Law  B. Dalton’s Law  C. Hess’s Law  D. Petit Law

Last Answer : Hess’s Law

A series of operations, which takes place in a certain order and restore the initial conditions at the end, is known as  A. reversible cycle  B. irreversible cycle  C. thermodynamic cycle  D. none of these

Description : A series of operations, which takes place in a certain order and restore the initial conditions at the end, is known as  A. reversible cycle  B. irreversible cycle  C. thermodynamic cycle  D. none of these

Last Answer : Answer: C

Explain the concept of initial and final conditions in switching circuits for elements R and L.

Description : Explain the concept of initial and final conditions in switching circuits for elements R and L. 

Last Answer : Concept of Initial and final condition in switching circuits for R:  Consider a resistor is connected to a voltage source, using a switch as shown in fig below The switch is closed ... of value Io in parallel with short circuit.(I0 is the current in inductor just before switching)

Explain the concept of initial and final conditions in switching for L and C.

Description : Explain the concept of initial and final conditions in switching for L and C.

Last Answer : i) Inductor: The current through an inductor cannot change instantly. If the inductor current is zero just before switching, then whatever may be the applied voltage, just after switching the inductor ... open-circuit.  The initial and final conditions are summarized in following table:

Why is the initial velocity zero in the case of a falling object ?

Description : Why is the initial velocity zero in the case of a falling object ?

Last Answer : Because the falling object starts falling from a fixed position. So its forward velocity is taken to be zero.

Can the initial value of a function be zero?

Description : Can the initial value of a function be zero?

Last Answer : Yes. In general, both the input and the output of a function canbe zero.

When a megohmmeter is used to test the insulation of a large motor, the initial dip of the pointer toward 'zero' is caused by ____________. A. good insulation B. the capacitance of the windings C. the leakage of the current along the surface of dirty insulation D. the dielectric-absorption effect of the insulation

Description : When a megohmmeter is used to test the insulation of a large motor, the initial dip of the pointer toward 'zero' is caused by ____________. A. good insulation B. the capacitance of the ... of the current along the surface of dirty insulation D. the dielectric-absorption effect of the insulation

Last Answer : Answer: B

When a megohmmeter is used to test the dielectric strength of wire insulation, the initial dip of the pointer toward 'zero' is caused by _____________. A. good insulation B. the leakage of current along the surface of dirty insulation C. the capacitance of the circuit D. the dielectric absorption effect of the insulation

Description : When a megohmmeter is used to test the dielectric strength of wire insulation, the initial dip of the pointer toward 'zero' is caused by _____________. A. good insulation B. the leakage of ... of dirty insulation C. the capacitance of the circuit D. the dielectric absorption effect of the insulation

Last Answer : Answer: C

In the initial stage of the project the probability of comple(C) Low (D) Any of the aboveting the project is ___ . (A) Zero (B) High

Description : In the initial stage of the project the probability of completing the project is ___ . (A) Zero (B) High (C) Low (D) Any of the above

Last Answer : (C) Low

In the initial stage of the project the probability of completing the project is . (A)Zero (B)High (C)Low (D)Any of the above

Description : In the initial stage of the project the probability of completing the  project is . (A)Zero (B)High (C)Low (D)Any of the above

Last Answer : (C)Low

.In the initial stage of the project the probability of completing the project is ___ . A.Zero B.High C.Low D.Medium

Description : .In the initial stage of the project the probability of completing the project is ___ .   A.Zero  B.High  C.Low  D.Medium

Last Answer : C.Low

For a zero order chemical reaction, the (A) Half life period is directly proportion to the initial concentration of the reactants (B) Plot of products concentration with time is a straight line through the origin (C) Products concentration increases linearly with time (D) All (A), (B) and (C)

Description : For a zero order chemical reaction, the (A) Half life period is directly proportion to the initial concentration of the reactants (B) Plot of products concentration with time is a straight line through the origin (C) Products concentration increases linearly with time (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

The knowledge of initial concentration and rate constant is necessary to determine the half life time of a reaction of __________ order. A) Zero (B) First (C) Second (D) None of these

Description : The knowledge of initial concentration and rate constant is necessary to determine the half life time of a reaction of __________ order. A) Zero (B) First (C) Second (D) None of these

Last Answer : (C) Second

If the time required to change the concentration of reactant to half its original value is independent of the initial concentration, the order of reaction is: (A) Zero (B) One (C) Two (D) Three

Description : If the time required to change the concentration of reactant to half its original value is independent of the initial concentration, the order of reaction is: (A) Zero (B) One (C) Two (D) Three

Last Answer : (B) One

For a __________ order chemical reaction as shown in the bellow figure, the half life period is independent of the initial concentration of the reactant A(A) Zero(B) First(C) Second(D) Third.

Description : For a __________ order chemical reaction as shown in the bellow figure, the half life period is independent of the initial concentration of the reactant A. (A) Zero (B) First (C) Second (D) Third

Last Answer : (B) First

For a zero order reaction, the concentration of product increases with the (A) Increase of reaction time (B) Increase in initial concentration (C) Total pressure (D) Decrease in total pressure

Description : For a zero order reaction, the concentration of product increases with the (A) Increase of reaction time (B) Increase in initial concentration (C) Total pressure (D) Decrease in total pressure

Last Answer : (A) Increase of reaction time

. In a zero order reaction, reactants concentration does not change with time and the (A) Time for half change is half the time taken for completion of the reaction (B) Time for half change is independent of the initial concentration (C) Time for completion of the reaction is independent of the initial concentration (D) Reaction rate is trebled when the initial concentration is trebled

Description : . In a zero order reaction, reactants concentration does not change with time and the (A) Time for half change is half the time taken for completion of the reaction (B) Time for ... is independent of the initial concentration (D) Reaction rate is trebled when the initial concentration is trebled

Last Answer : (A) Time for half change is half the time taken for completion of the reaction

Consider the following salient points in a stress-strain curve of a mild steel bar: 1. Yield point 2. Braking point 3. Yield plateau 4 . Proportionality limit 5. Ultimate point The correct sequence in which they occur while testing the mild steel bar in tension from initial zero strain to failure is (a) 4, 1, 2, 3 and 5 (b) 1, 4, 3, 5 and 2 (c) 4, 1, 3, 5 and 2 (d) 1, 4, 2, 3 and 5

Description : Consider the following salient points in a stress-strain curve of a mild steel bar: 1. Yield point 2. Braking point 3. Yield plateau 4 . Proportionality limit 5. Ultimate point The correct sequence in which they occur while testing the mild ... , 5 and 2 (c) 4, 1, 3, 5 and 2 (d) 1, 4, 2, 3 and 5

Last Answer : (c) 4, 1, 3, 5 and 2

Initial gap between two turns of a close coil helical tension spring should be a. 0.5 mm b. based on the maximum deflection c. 1 mm d. zero

Description : Initial gap between two turns of a close coil helical tension spring should be a. 0.5 mm b. based on the maximum deflection c. 1 mm d. zero

Last Answer : d. zero

The President of India is elected by a proportional representation system through single transferable vote. This implies that - (1) each elected MP or MLA has an equal number of votes (2) MPs and MLAs of a State have the same number of votes (3) all MPs and MLAs have one vote each (4) MPs and MLAs of different States have different numbers of votes

Description : The President of India is elected by a proportional representation system through single transferable vote. This implies that - (1) each elected MP or MLA has an equal number of votes (2) MPs and ... and MLAs have one vote each (4) MPs and MLAs of different States have different numbers of votes

Last Answer : (3) all MPs and MLAs have one vote each Explanation: Irrespective of the fact that a number of seats may have to be filled, this system postulates one vote for each voter with the reservation ... to other candidates. This is the reason why this system is known as "single transferable vote system."