A space velocity of 5 hr -1 means that (A) Five reactor volumes of feed (at specified conditions) are being fed into the reactor per hour (B) After every 5 hours, reactor is being filled with the feed (C) Cent per cent conversion can be achieved in at least 5 hours (D) A fixed conversion of a given batch of feed takes 5 hours

A space velocity of 5 hr
-1 means that
(A) Five reactor volumes of feed (at specified conditions) are being fed into
the reactor per hour
(B) After every 5 hours, reactor is being filled with the feed
(C) Cent per cent conversion can be achieved in at least 5 hours
(D) A fixed conversion of a given batch of feed takes 5 hours
by

1 Answer

Answer :

(A) Five reactor volumes of feed (at specified conditions) are being fed into
the reactor per hour
by

Related questions

A space time of 3 hours for a flow reactor means that (A) The time required to process one reactor volume of feed (measured at specified conditions) is 3 hours (B) Three reactor volumes of feed can be processed every hour (C) It takes three hours to dump the entire volume of the reactor with feed (D) Conversion is cent per cent after three hours

Description : A space time of 3 hours for a flow reactor means that (A) The time required to process one reactor volume of feed (measured at specified conditions) is 3 hours (B) Three reactor volumes of feed ... to dump the entire volume of the reactor with feed (D) Conversion is cent per cent after three hours

Last Answer : (A) The time required to process one reactor volume of feed (measured at specified conditions) is 3 hours

Pick out the wrong statement pertaining to space velocity of flow reactors. (A) The unit of space velocity is (time) -1 (B) The space velocity of 3 hr -1 means that three reactor volumes of feed at specified conditions are being fed into the reactor every hour (C) The space velocity of 3 hr -1 means that one third reactor volume of feed at specified conditions are being fed into the reactor (D) None of these

Description : Pick out the wrong statement pertaining to space velocity of flow reactors. (A) The unit of space velocity is (time) -1 (B) The space velocity of 3 hr -1 means that three reactor volumes of ... one third reactor volume of feed at specified conditions are being fed into the reactor (D) None of these

Last Answer : (C) The space velocity of 3 hr -1 means that one third reactor volume of feed at specified conditions are being fed into the reactor

A high space velocity means that a given (A) Reaction can be accomplished with small reactor (B) Conversion can be obtained with a high feed rate (C) Both (A) and (B) (D) None of these

Description : A high space velocity means that a given (A) Reaction can be accomplished with small reactor (B) Conversion can be obtained with a high feed rate (C) Both (A) and (B) (D) None of these

Last Answer : (C) Both (A) and (B)

Space velocity (A) Describes the extensive operating characteristics of a tubular flow reactor (B) Is the maximum feed rate per unit volume of reactor for a given conversion (C) Is a measure of the ease of the reaction (D) All (A), (B) and (C)

Description : Space velocity (A) Describes the extensive operating characteristics of a tubular flow reactor (B) Is the maximum feed rate per unit volume of reactor for a given conversion (C) Is a measure of the ease of the reaction (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

A batch reactor is suitable for (A) Achieving cent percent conversion of reactants into products (B) Large scale gaseous phase reactions (C) Liquid phase reactions(D) Obtaining uniform polymerisation products in highly exothermicreactions

Description : A batch reactor is suitable for (A) Achieving cent percent conversion of reactants into products (B) Large scale gaseous phase reactions (C) Liquid phase reactions (D) Obtaining uniform polymerisation products in highly exothermic reactions

Last Answer : (C) Liquid phase reactions

Pick out the wrong statement. (A) The integral method of analysing kinetic data is used when the data is scattered (B) The differential method of analysing kinetic data requires more accurate or larger amounts of data (C) When the reaction rate is independent of temperature, the reaction is said to be of zero order (D) The ratio of volumes of plug flow reactor to that of mixed reactor is always less than one for identical feed composition, flow rate, conversion and for all positive reaction orders

Description : Pick out the wrong statement. (A) The integral method of analysing kinetic data is used when the data is scattered (B) The differential method of analysing kinetic data requires more accurate ... less than one for identical feed composition, flow rate, conversion and for all positive reaction orders

Last Answer : (C) When the reaction rate is independent of temperature, the reaction is said to be of zero order

With the same reaction time, initial concentration and feed rate, the reaction 2A → B is carried out separately in CSTR and P.F. reactor of equal volumes. The conversion will be (A) Higher in P.F. reactor (B) Higher in CSTR (C) Same in both the reactors (D) Data insufficient; can't be predicted

Description : With the same reaction time, initial concentration and feed rate, the reaction 2A → B is carried out separately in CSTR and P.F. reactor of equal volumes. The conversion will be (A) Higher in P.F. reactor (B) Higher in CSTR (C) Same in both the reactors (D) Data insufficient; can't be predicted

Last Answer : (A) Higher in P.F. reactor

Which of the following fixes the volume of a batch reactor for a particular conversion and production rate? (A) Operating conditions (e.g. pressure and temperature) (B) Rate constant (C) Density of mixture (D) None of these

Description : Which of the following fixes the volume of a batch reactor for a particular conversion and production rate? (A) Operating conditions (e.g. pressure and temperature) (B) Rate constant (C) Density of mixture (D) None of these

Last Answer : (C) Density of mixture

In a semi-batch reactor (A) Velocity of reaction can be controlled (B) Maximum conversion can be controlled (C) Both the reactants flow counter-currently (D) Residence time is constant

Description : In a semi-batch reactor (A) Velocity of reaction can be controlled (B) Maximum conversion can be controlled (C) Both the reactants flow counter-currently (D) Residence time is constant

Last Answer : (A) Velocity of reaction can be controlled

A batch adiabatic reactor at an initial temperature of 373°K is being used for the reaction, A → B. Assume the heat of reaction is - 1kJ/mole at 373°K and heat capacity of both A and B to be constant and equal to 50J/mole.K. The temperature rise after a conversion of 0.5 will be: (A) 5°C (B) 10°C (C) 20°C (D) 100°C

Description : A batch adiabatic reactor at an initial temperature of 373°K is being used for the reaction, A → B. Assume the heat of reaction is - 1kJ/mole at 373°K and heat capacity of both A and B to be constant and equal ... rise after a conversion of 0.5 will be: (A) 5°C (B) 10°C (C) 20°C (D) 100°C

Last Answer : (B) 10°C

In a semi-batch reactor, (A) Mixing takes place in axial direction only (B) Velocity of reaction can be controlled (C) Condition similar to plug flow reactor exists (D) Residence time is constant

Description : In a semi-batch reactor, (A) Mixing takes place in axial direction only (B) Velocity of reaction can be controlled (C) Condition similar to plug flow reactor exists (D) Residence time is constant

Last Answer : (B) Velocity of reaction can be controlled

A this usual rowing rate, Mohit can travel 12 miles downstream in a certain river in 6 hours less than it takes him to travel the same distance upstream. But if he could double his usual rowing rate for his 24 miles round trip, the downstream 12 miles would then take only one hour less than the upstream 12 miles. What is the speed of the current in miles per hour? A.2.5m/hr B.4 m/hr C.8/3 m/hr D. 5/3m/hr

Description : A this usual rowing rate, Mohit can travel 12 miles downstream in a certain river in 6 hours less than it takes him to travel the same distance upstream. But if he could double his usual rowing rate for his 24 miles round trip, ... current in miles per hour? A.2.5m/hr B.4 m/hr C.8/3 m/hr D. 5/3m/hr

Last Answer : Answer-C Basic Formula: Speed of the stream = ½ (a-b) km/hr Explanation: Let the speed in still water be x m/hr Speed of stream be y m/hr Then, speed upstream = x-y m/hr and Speed downstream = x+y m/hr 12/x-y - ... 1] 3y^2 = 8 y so, y = 8/3 speed of the current = 8/3 m/hr = 2 (2/3) m/hr

Pick out the wrong statement. (A) In a batch reactor, which is exclusively used for liquid phase reactions; temperature pressure and composition may vary with time (B) In a semi-batch reactor, one reactant is charged batch wise, while the other reactant is fed continuously (C) In a continuous flow reactor, uniform concentration cannot be maintained throughout the vessel even in a well agitated system (D) In a continuous flow reactor, both the reactants and the products flow out continuously

Description : Pick out the wrong statement. (A) In a batch reactor, which is exclusively used for liquid phase reactions; temperature pressure and composition may vary with time (B) In a semi-batch reactor, ... system (D) In a continuous flow reactor, both the reactants and the products flow out continuously

Last Answer : (C) In a continuous flow reactor, uniform concentration cannot be maintained throughout the vessel even in a well agitated system

A second order liquid phase reaction, A → B, is carried out in a mixed flow reactor operated in semi batch mode (no exit stream). The reactant A at concentration CAF is fed to the reactor at a volumetric flow rate of F. The volume of the reacting mixture is V and the density of the liquid mixture is constant. The mass balance for A is (A) d(VCA )/dt = -F (CAF - CA ) - kCA 2V (B) d(VCA )/dt = F (CAF - CA ) - kCA 2V (C) d(VCA )/dt = -FCA - kCA 2V (D) d(VCA )/dt = FCAF - kCA 2V

Description : A second order liquid phase reaction, A → B, is carried out in a mixed flow reactor operated in semi batch mode (no exit stream). The reactant A at concentration CAF is fed to the reactor at a volumetric flow rate of F. The volume ... 2V (C) d(VCA )/dt = -FCA - kCA 2V (D) d(VCA )/dt = FCAF - kCA 2V

Last Answer : (D) d(VCA )/dt = FCAF - kCA 2V

The minimum amount of------------------,irrespective of such private participation,could be specified at a minimum 17.5 per cent of project costs by lending institutions. A. bank loans B. promotors contribution C. fixed capital D. working capital

Description : The minimum amount of------------------,irrespective of such private participation,could be specified at a minimum 17.5 per cent of project costs by lending institutions. A. bank loans B. promotors contribution C. fixed capital D. working capital

Last Answer : B. promotors contribution

The reaction A → B is conducted in an adiabatic plug flow reactor (PFR). Pure A at a concentration of 2 kmol/m3 is fed to the reactor at the rate of 0.01 m3 /s and at a temperature of 500 K. If the exit conversion is 20%, then the exit temperature (in k) is (Data: Heat of reaction at 298 K = - 50000 kJ/ kmole of A reacted Heat capacities CPA = CPB = 100kJ/kmole. K (may be assumed to be independent of temperature)) (A) 400 (B) 500 (C) 600 (D) 1000

Description : The reaction A → B is conducted in an adiabatic plug flow reactor (PFR). Pure A at a concentration of 2 kmol/m3 is fed to the reactor at the rate of 0.01 m3 /s and at a temperature of 500 K. If the exit ... /kmole. K (may be assumed to be independent of temperature)) (A) 400 (B) 500 (C) 600 (D) 1000

Last Answer : (C) 600

The reaction A → B is conducted in an isothermal batch reactor. If the conversion of A increases linearly with holding time, then the order of the reaction is (A) 0 (B) 1 (C) 1.5 (D) 2

Description : The reaction A → B is conducted in an isothermal batch reactor. If the conversion of A increases linearly with holding time, then the order of the reaction is (A) 0 (B) 1 (C) 1.5 (D) 2

Last Answer : (A) 0

. A job is budgeted to require 3,300 productive hours after incurring 25% idle time. If the total labour cost budgeted for the job is Rs36,300. What is the labour cost per hour( to the nearest cent)? (a) Rs 8.25 (b) Rs 8.80 (c) Rs 11.00 (d) Rs 14.67

Description : . A job is budgeted to require 3,300 productive hours after incurring 25% idle time. If the total labour  cost budgeted for the job is Rs36,300. What is the labour cost per hour( to the nearest cent)? (a) Rs 8.25 (b) Rs 8.80 (c) Rs 11.00 (d) Rs 14.67

Last Answer : (a) Rs 8.25

A batch reactor is (A) Suitable for gas-phase reactions on commercial scale (B) Suitable for liquid phase reactions involving small production rate (C) Least expensive to operate for a given rate (D) Most suitable for very large production rate

Description : A batch reactor is (A) Suitable for gas-phase reactions on commercial scale (B) Suitable for liquid phase reactions involving small production rate (C) Least expensive to operate for a given rate (D) Most suitable for very large production rate

Last Answer : (B) Suitable for liquid phase reactions involving small production rate

. A batch reactor is characterised by (A) Constant residence time(B) Variation in extent of reaction and properties of the reaction mixture withtime(C) Variation in reactor volume(D) Very low conversion

Description : . A batch reactor is characterised by (A) Constant residence time (B) Variation in extent of reaction and properties of the reaction mixture with time (C) Variation in reactor volume (D) Very low conversion

Last Answer : (B) Variation in extent of reaction and properties of the reaction mixture with time

CG Co manufactures a single product T. Budgeted production output of product T during June is 200 units. Each unit of product T requires 6 labour hours for completion and CG Co anticipates 20 per cent idle time. Labour is paid at a rate of Rs7 per hour. The direct labour cost budget for March is (a) Rs 6,720 (b) 8,400 (c) 10,080 (d) 10,500

Description : CG Co manufactures a single product T. Budgeted production output of product T during June is  200 units. Each unit of product T requires 6 labour hours for completion and CG Co anticipates 20 per  cent idle time. Labour is paid at ... for March is (a) Rs 6,720 (b) 8,400 (c) 10,080 (d) 10,500

Last Answer : (d) 10,500

Which of the following is the most suitable for isothermal operation? (A) Batch reactor (B) Back-mix reactor (C) Plug-flow reactor (D) Fixed bed reactor

Description : Which of the following is the most suitable for isothermal operation? (A) Batch reactor (B) Back-mix reactor (C) Plug-flow reactor (D) Fixed bed reactor

Last Answer : (B) Back-mix reactor

For nearly isothermal operation involving large reaction time in a liquid-phase reaction, the most suitable reactor is a __________ reactor. (A) Stirred tank (B) Tubular flow (C) Batch (D) Fixed bed

Description : For nearly isothermal operation involving large reaction time in a liquid-phase reaction, the most suitable reactor is a __________ reactor. (A) Stirred tank (B) Tubular flow (C) Batch (D) Fixed bed

Last Answer : (A) Stirred tank

Oil is hydrogenated using nickel catalyst in a __________ reactor. (A) Batch (B) Slurry (C) Fluidised bed (D) Fixed bed

Description : Oil is hydrogenated using nickel catalyst in a __________ reactor. (A) Batch (B) Slurry (C) Fluidised bed (D) Fixed bed

Last Answer : (B) Slurry

Maintain 850 OC for 1 hour (soaking time).  Cool the material to 60 OC in 4 hours. a) Calculate the efficiency of the furnace, if the specific heat of steel is 0.12 kcal/kgOC and fuel oil consumption per batch is 1400 litres.  GCV of fuel oil - 10200 kcal/kg,  Cost of fuel oil - Rs. 46,000/kL,  Sp. gr. of fuel oil - 0.92. b) Due to high cost of oil, the plant management decides to convert to a lower operating cost LPG fired furnace lined on the inside with ceramic fibre insulation and with an operating efficiency of 80%, for same requirement. The investment towards installation of the new furnace is Rs. 50 lakhs. Calculate the Return on Investment, if the plant operates two batches per day and 250 days in a year.  Cost of LPG - Rs. 75/kg,  GCV of LPG - 12500 kcal/kg.

Description : In a heat treatment shop, steel components are heat-treated in batches of 80 Tons. The  heat treatment cycle is as follows;  Increase temperature from 30 OC to 850 OC in 3 hours.  ... efficiency of 80%, for same requirement. The investment towards installation of  the new furnace is Rs. 50

Last Answer : Quantity of steel treated per batch - 80 Tons a. Efficiency of Furnace: Useful heat supplied to steel - 80000 x 0.12 x (850 - 30)   = 7872000 kcal/batch .1 mark Total heat ... = Rs. 64400/batch Efficiency of new LPG furnace - 80% Heat supplied in new LPG furnace - 7872000/0.8

Raghu starts a bike at 40 km/hr and he increases his speed in every hour by 4 km/hr. Then the maximum distance covered by him in 12 hours is: a) 744 km b) 658 km c) 436 km d) 512 km

Description : Raghu starts a bike at 40 km/hr and he increases his speed in every hour by 4 km/hr. Then the maximum distance covered by him in 12 hours is: a) 744 km b) 658 km c) 436 km d) 512 km

Last Answer : A Speed of the rider = 40km/hr. Distance covered in 1st hour = 40 km. He increased his speed in every 1 hour by 4 km/hr. Distance covered in every 1 hours will be, 44, 48, ,... upto 12 terms.(for 12 hours). ... (2(40)+(11)4) = 6(80 + 44) = 6(124) = 744. Hence, he covers 744 km in 12 hours.

Under normal operating conditions, the bearings are filled with the proper type of lubricant after every hours of working about a) 6 hours b) 8 hoursc) 10 hours d) 12 hours

Description : Under normal operating conditions, the bearings are filled with the proper type of lubricant after every hours of working about a) 6 hours b) 8 hoursc) 10 hours d) 12 hours

Last Answer : c) 10 hours

Choking in case of pipe flow means that a (A) Specified mass flow rate cannot be achieved (B) Valve is closed in the line (C) Restriction in flow cross-section area occurs (D) None of these

Description : Choking in case of pipe flow means that a (A) Specified mass flow rate cannot be achieved (B) Valve is closed in the line (C) Restriction in flow cross-section area occurs (D) None of these

Last Answer : (B) Valve is closed in the line

Thanu can travel 24 miles downstream in a certain river in 12hrs less than it takes him to travel the same distance upstream. But if he could double his usual rowing rate for his 48 mile round trip, the downstream 24 miles would then take only 2hr less than the upstream 24miles. What is the speed of the current in miles per hour? A) 2 / 3 miles/hr B) 8 / 3 miles/hr C) 7 / 5 miles/hr D) 3 / 5 miles/hr

Description : Thanu can travel 24 miles downstream in a certain river in 12hrs less than it takes him to travel the same distance upstream. But if he could double his usual rowing rate for his 48 mile round trip, the downstream 24 miles would ... 3 miles/hr B) 8 / 3 miles/hr C) 7 / 5 miles/hr D) 3 / 5 miles/hr 

Last Answer : ANSWER : B 

An isothermal aqueous phase reversible reaction, P ⇌ R, is to be carried out in a mixed flow reactor. The reaction rate in k.mole/m3 .h is given by, r = 0.5CP - 0.125CR. A stream containing only P enters the reactor. The residence time required (in hours) for 40% conversion of P is (A) 0.80 (B) 1.33 (C) 1.60 (D) 2.67

Description : An isothermal aqueous phase reversible reaction, P ⇌ R, is to be carried out in a mixed flow reactor. The reaction rate in k.mole/m3 .h is given by, r = 0.5CP - 0.125CR. A stream containing only P enters the reactor. The ... (in hours) for 40% conversion of P is (A) 0.80 (B) 1.33 (C) 1.60 (D) 2.67

Last Answer : (C) 1.60

An isothermal irreversible reaction is being carried out in an ideal tubular flow reactor. The conversion in this case will __________ with decrease in space time. (A) Increase (B) Increase exponentially (C) Decrease (D) Remain unchanged

Description : An isothermal irreversible reaction is being carried out in an ideal tubular flow reactor. The conversion in this case will __________ with decrease in space time. (A) Increase (B) Increase exponentially (C) Decrease (D) Remain unchanged

Last Answer : (C) Decrease

With increase in the space time of an irreversible isothermal reaction being carried out in a P.F. reactor, the conversion will (A) Increase (B) Decrease (C) Remain same (D) Data in insufficient; can't be predicted

Description : With increase in the space time of an irreversible isothermal reaction being carried out in a P.F. reactor, the conversion will (A) Increase (B) Decrease (C) Remain same (D) Data in insufficient; can't be predicted

Last Answer : (A) Increase

The use of space time is preferred over the mean residence time in the design of a/an (A) Batch reactor (B) Ideal tubular-flow reactor (C) Slurry reactor (D) CSTR

Description : The use of space time is preferred over the mean residence time in the design of a/an (A) Batch reactor (B) Ideal tubular-flow reactor (C) Slurry reactor (D) CSTR

Last Answer : (B) Ideal tubular-flow reactor

The gas phase reaction 2A ⇌ B is carried out in an isothermal plug flow reactor. The feed consists of 80 mole % A and 20 mole % inerts. If the conversion of A at the reactor exit is 50%, then CA/CA0 at the outlet of the reactor is (A) 2/3 (B) 5/8 (C) 1/3 (D) 3/8

Description : The gas phase reaction 2A ⇌ B is carried out in an isothermal plug flow reactor. The feed consists of 80 mole % A and 20 mole % inerts. If the conversion of A at the reactor exit is 50%, then CA/CA0 at the outlet of the reactor is (A) 2/3 (B) 5/8 (C) 1/3 (D) 3/8

Last Answer : (B) 5/8

For the liquid phase zero order irreversible reaction A → B, the conversion of A in a CSTR is found to be 0.3 at a space velocity of 0.1min -1 . What will be the conversion for a PFR with a space velocity of 0.2 min -1? Assume that all the other operating conditions are the same for CSTR and PFR. (A) 0.15(B) 0.30 (C) 0.60 (D) 0.90

Description : For the liquid phase zero order irreversible reaction A → B, the conversion of A in a CSTR is found to be 0.3 at a space velocity of 0.1min -1 . What will be the conversion for a PFR with a space velocity of 0.2 min ... conditions are the same for CSTR and PFR. (A) 0.15 (B) 0.30 (C) 0.60 (D) 0.90

Last Answer : (C) 0.60

The ratio of volume of mixed reactor to the volume of P.F.R. (for identical flow rate, feed composition and conversion) for zero order reaction is: (A) ∞(B) 0 (C) 1 (D) > 1

Description : The ratio of volume of mixed reactor to the volume of P.F.R. (for identical flow rate, feed composition and conversion) for zero order reaction is: (A) ∞ (B) 0 (C) 1 (D) > 1

Last Answer : (C) 1

With increase in the order of reaction (for all positive reaction orders), the ratio of the volume of mixed reactor to the volume of plug flow reactor (for identical feed composition, flow rate and conversion). (A) Increases (B) Decreases (C) Remain same (D) Increases linearly

Description : With increase in the order of reaction (for all positive reaction orders), the ratio of the volume of mixed reactor to the volume of plug flow reactor (for identical feed composition, flow rate and conversion). (A) Increases (B) Decreases (C) Remain same (D) Increases linearly

Last Answer : (A) Increases

The main purpose of control rod in a nuclear reactor is to control the (A) Chain reaction and hence the power output by regulating the number of secondary neutrons causing fission (B) Emission of hazardous radiation (C) Conversion of fissile material into fertile material (D) Velocity of the secondary neutrons

Description : The main purpose of control rod in a nuclear reactor is to control the (A) Chain reaction and hence the power output by regulating the number of secondary neutrons causing fission (B) ... radiation (C) Conversion of fissile material into fertile material (D) Velocity of the secondary neutrons

Last Answer : (A) Chain reaction and hence the power output by regulating the number of secondary neutrons causing fission

For high conversion in a highly exothermic solid catalysed reaction, use a __________ bed reactor. (A) Fixed (B) Fluidised bed reactor followed by a fixed (C) Fixed bed reactor followed by a fluidised (D) Fluidised

Description : For high conversion in a highly exothermic solid catalysed reaction, use a __________ bed reactor. (A) Fixed (B) Fluidised bed reactor followed by a fixed (C) Fixed bed reactor followed by a fluidised (D) Fluidised

Last Answer : (B) Fluidised bed reactor followed by a fixed

Which of the following will give maximum gas conversion? (A) Fixed bed reactor (B) Fluidised bed reactor (C) Semi-fluidised bed reactor (D) Plug-flow catalytic reactor

Description : Which of the following will give maximum gas conversion? (A) Fixed bed reactor (B) Fluidised bed reactor (C) Semi-fluidised bed reactor (D) Plug-flow catalytic reactor

Last Answer : (C) Semi-fluidised bed reactor

Seiko takes pottery classes from two different studios. Paulas pottery charges $18 for clay and charges $10 per hour. Sallys ceramics charges $4 for clay and charges $12 per hour. After how many hours will the studios cost the same?

Description : Seiko takes pottery classes from two different studios. Paulas pottery charges $18 for clay and charges $10 per hour. Sallys ceramics charges $4 for clay and charges $12 per hour. After how many hours will the studios cost the same?

Last Answer : .

An exothermic reaction takes place in an adiabatic reactor. The product temperature __________ reactor feed temperature. (A) Is always equal to (B) Is always greater than (C) Is always less than (D) May be greater or less than

Description : An exothermic reaction takes place in an adiabatic reactor. The product temperature __________ reactor feed temperature. (A) Is always equal to (B) Is always greater than (C) Is always less than (D) May be greater or less than

Last Answer : (B) Is always greater than

Which one of the following statements is correct with respect to AIDS? (a) The HIV can be transmitted through eating food together with an infected person. (b) Drug addicts are least susceptible to HIV infection.(c) AIDS patients are being fully cured cent per cent with proper care and nutrition. (d) The causative HIV retrovirus enters helper T-lymphocytes thus reducing their numbers.

Description : Which one of the following statements is correct with respect to AIDS? (a) The HIV can be transmitted through eating food together with an infected person. (b) Drug addicts are least ... and nutrition. (d) The causative HIV retrovirus enters helper T-lymphocytes thus reducing their numbers.

Last Answer : (d) The causative HIV retrovirus enters helper T-lymphocytes thus reducing their numbers.

A stream line is (A) Fixed in space in steady flow (B) Always the path of particle (C) Drawn normal to the velocity vector at every point (D) A line connecting the mid points of flow cross-section

Description : A stream line is (A) Fixed in space in steady flow (B) Always the path of particle (C) Drawn normal to the velocity vector at every point (D) A line connecting the mid points of flow cross-section

Last Answer : (A) Fixed in space in steady flow

Theoretical capacity of crushing rolls in tons/hr is given by (where, V = peripheral velocity, m/sec. W = width of rolls, m Dr = distance between rolls ρ = density of material to be crushed, kg/m3 here, V =πND where, N = speed of the rolls in rotation per second (rps) D = diameter of rolls, m). (A) 3.6 V.W.Dr.ρ (B) 3.6 V.W. ρ (C) 3.6 W.Dr.ρ (D) 3.6 V.W.Dr/ρ

Description : Theoretical capacity of crushing rolls in tons/hr is given by (where, V = peripheral velocity, m/sec. W = width of rolls, m Dr = distance between rolls ρ = density of material to be crushed, kg/m3 here, V =πND where, N = speed of the rolls ... V.W.Dr.ρ (B) 3.6 V.W. ρ (C) 3.6 W.Dr.ρ (D) 3.6 V.W.Dr/ρ

Last Answer : (A) 3.6 V.W.Dr.ρ

What specific type of bacteria reproduces through binary fission every hour. If there are three bacteria cells to begin with how many bacterial cells will there be in five hours?

Description : What specific type of bacteria reproduces through binary fission every hour. If there are three bacteria cells to begin with how many bacterial cells will there be in five hours?

Last Answer : 32

The first order gas phase reaction as shown in the bellow figure is conducted isothermally in batch mode. The rate of change of conversion with time is given by (A) dXA /dt = k1 (1 - XA ) 2 (1 + 2XA ) (B) dXA /dt = k1 (1 - XA ) (1 + 0.5XA ) (C) dXA /dt = k1 (1 - XA ) (D) dXA /dt = k1 (1 - XA )/(1 + XA )

Description : The first order gas phase reaction as shown in the bellow figure is conducted isothermally in batch mode. The rate of change of conversion with time is given by (A) dXA /dt = k1 (1 - XA ) 2 (1 + 2XA ) (B) dXA /dt = k1 (1 - XA ... 5XA ) (C) dXA /dt = k1 (1 - XA ) (D) dXA /dt = k1 (1 - XA )/(1 + XA )

Last Answer : (C) dXA /dt = k1 (1 - XA

Sometimes, batch process is preferred over continuous process, when the product (A) Quality & yield cannot be achieved in continuous processes, because of long residence time (B) Sales demand is fluctuating (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Sometimes, batch process is preferred over continuous process, when the product (A) Quality & yield cannot be achieved in continuous processes, because of long residence time (B) Sales demand is fluctuating (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)