“The enthalpy change for any chemical reaction is independent of the intermediate stages, provided the initial and final conditions are the same for each route.” This statement is known as:

“The enthalpy change for any chemical reaction is independent of the intermediate stages, provided the initial and final conditions are the same for each route.” This statement is known as:
 A. Dulong’s Law
 B. Dalton’s Law
 C. Hess’s Law
 D. Petit Law
by

1 Answer

Answer :

Hess’s Law
by

Related questions

What is the energy absorbed during chemical reaction under constant volume conditions?  A. Entropy  B. Ion exchange  C. Enthalpy  D. Enthalpy of reaction

Description : What is the energy absorbed during chemical reaction under constant volume conditions?  A. Entropy  B. Ion exchange  C. Enthalpy  D. Enthalpy of reaction

Last Answer : Enthalpy

The total change in the enthalpy of a system is independent of the (A) Number of intermediate chemical reactions involved (B) Pressure and temperature (C) State of combination and aggregation in the beginning and at the end of the reaction (D) None of these

Description : The total change in the enthalpy of a system is independent of the (A) Number of intermediate chemical reactions involved (B) Pressure and temperature (C) State of combination and aggregation in the beginning and at the end of the reaction (D) None of these

Last Answer : (A) Number of intermediate chemical reactions involved

Burning of Gasoline initially requires heat before it burns spontaneously. Which of the following does not give a good explanation of this phenomenon?  a. the initial heat rises the enthalpy of the reactant  b. the initial heat lowers the activation of energy of the reactants  c. the enthalpy of reactants is lower than the enthalpy of products.  d. The enthalpy of the product is lower than the enthalpy of the reactant

Description : Burning of Gasoline initially requires heat before it burns spontaneously. Which of the following does not give a good explanation of this phenomenon?  a. the initial heat rises the enthalpy of the reactant ... of products.  d. The enthalpy of the product is lower than the enthalpy of the reactant

Last Answer : the enthalpy of reactants is lower than the enthalpy of products.

Pick out the wrong statement. (A) 'Hold back' is defined as the fraction of material that stays longer than the mean residence time (B) Study of non-ideal flow reactor is done experimentally by stimulus￾response technique (C) For studying a chemical reaction, it is desirable to monitor the reactants during initial stages and the products during the final stages of reaction (D) A batch reactor cannot be used to study the kinetics of catalytic reaction

Description : Pick out the wrong statement. (A) 'Hold back' is defined as the fraction of material that stays longer than the mean residence time (B) Study of non-ideal flow reactor is done experimentally ... final stages of reaction (D) A batch reactor cannot be used to study the kinetics of catalytic reaction

Last Answer : (D) A batch reactor cannot be used to study the kinetics of catalytic reaction

A series of operations, which takes place in a certain order and restore the initial conditions at the end, is known as  A. reversible cycle  B. irreversible cycle  C. thermodynamic cycle  D. none of these

Description : A series of operations, which takes place in a certain order and restore the initial conditions at the end, is known as  A. reversible cycle  B. irreversible cycle  C. thermodynamic cycle  D. none of these

Last Answer : Answer: C

Carnot cycle efficiency is maximum when  (a) initial temperature is 0°K  (b) final temperature is 0°K  (c) difference between initial and final temperature is 0°K  (d) final temperature is 0°C  (e) initial temperature is minimum possible.

Description : Carnot cycle efficiency is maximum when  (a) initial temperature is 0°K  (b) final temperature is 0°K  (c) difference between initial and final temperature is 0°K  (d) final temperature is 0°C  (e) initial temperature is minimum possible.

Last Answer : Answer : b

The change that the system that undergoes from one equilibrium state to another is known as  a. oath  b. process  c. enthalpy change  d. entropy change

Description : The change that the system that undergoes from one equilibrium state to another is known as  a. oath  b. process  c. enthalpy change  d. entropy change

Last Answer : process

The first law of thermodynamics is based on which of the following principles?  a. conservation of mass  b. the enthalpy-entropy relationship  c. action – reaction  d. conservation of energy

Description : The first law of thermodynamics is based on which of the following principles?  a. conservation of mass  b. the enthalpy-entropy relationship  c. action – reaction  d. conservation of energy

Last Answer : conservation of energy

Entropy is the measure of:  a. The internal energy of a gas  b. The heat capacity of a substance  c. Randomness or disorder  d. The change of enthalpy of a system

Description : Entropy is the measure of:  a. The internal energy of a gas  b. The heat capacity of a substance  c. Randomness or disorder  d. The change of enthalpy of a system

Last Answer : Randomness or disorder

An ideal gas is compresses isothermally. The enthalpy change is  a. Always negative  b. Always positive  c. zero  d. undefined

Description : An ideal gas is compresses isothermally. The enthalpy change is  a. Always negative  b. Always positive  c. zero  d. undefined

Last Answer : zero

Which of the following occurs in a reversible polytrophic process?  a. Enthalpy remains constant  b. Internal energy does not change  c. Some heat transfer occurs  d. Entropy remains constant

Description : Which of the following occurs in a reversible polytrophic process?  a. Enthalpy remains constant  b. Internal energy does not change  c. Some heat transfer occurs  d. Entropy remains constant

Last Answer : Some heat transfer occurs

A state occurs in isentropic process  a. The change in entropy is 0  b. The change in entropy is 1  c. The change in enthalpy is 0  d. The change in enthalpy is 1

Description : A state occurs in isentropic process  a. The change in entropy is 0  b. The change in entropy is 1  c. The change in enthalpy is 0  d. The change in enthalpy is 1

Last Answer : The change in entropy is 0

Regardless of the process, the change in enthalpy firm moles of ideal gas is  a. Heat  b. Enthalpy  c. Entropy  d. Density

Description : Regardless of the process, the change in enthalpy firm moles of ideal gas is  a. Heat  b. Enthalpy  c. Entropy  d. Density

Last Answer : Heat

An adiabatic process in which there is no change in system enthalpy but for which there is a significant decrease in pressure is called _____.  A. Isochoric process  B. Isobaric process  C. Throttling process  D. Quasistatic process

Description : An adiabatic process in which there is no change in system enthalpy but for which there is a significant decrease in pressure is called _____.  A. Isochoric process  B. Isobaric process  C. Throttling process  D. Quasistatic process

Last Answer : Throttling process

In an isothermal process,  A. there is no change in temperature  B. there is no change in enthalpy  C. there is no change in internal energy  D. all of these

Description : In an isothermal process,  A. there is no change in temperature  B. there is no change in enthalpy  C. there is no change in internal energy  D. all of these

Last Answer : Answer: D

If heat be exchanged in a reversible manner, which of the following property of the working substance will change accordingly  (a) temperature  (b) enthalpy  (c) internal energy  (d) entropy  (e) all of the above.

Description : If heat be exchanged in a reversible manner, which of the following property of the working substance will change accordingly  (a) temperature  (b) enthalpy  (c) internal energy  (d) entropy  (e) all of the above.

Last Answer : Answer : d

Change in enthalpy in a closed system is equal to heat transferred if the reversible process takes place at constant  (a) pressure  (b) temperature  (c) volume  (d) internal energy  (e) entropy.

Description : Change in enthalpy in a closed system is equal to heat transferred if the reversible process takes place at constant  (a) pressure  (b) temperature  (c) volume  (d) internal energy  (e) entropy.

Last Answer : Answer : a

Change in enthalpy of a system is the heat supplied at  (a) constant pressure  (b) constant temperature  (c) constant volume  (d) constant entropy  (e) N.T.P. condition.

Description : Change in enthalpy of a system is the heat supplied at  (a) constant pressure  (b) constant temperature  (c) constant volume  (d) constant entropy  (e) N.T.P. condition.

Last Answer : Answer : a

What is known as the total heat and heat content at various times in the history?  a. enthalpy  b. entropy  c. internal energy  d. latent heat

Description : What is known as the total heat and heat content at various times in the history?  a. enthalpy  b. entropy  c. internal energy  d. latent heat

Last Answer : enthalpy

The sum of internal energy (U) and the product of pressure and volume (p.v) is known as  A. workdone  B. entropy  C. enthalpy  D. none of these

Description : The sum of internal energy (U) and the product of pressure and volume (p.v) is known as  A. workdone  B. entropy  C. enthalpy  D. none of these

Last Answer : Answer: C

Total heat of a substance is also known as  (a) internal energy  (b) entropy  (c) thermal capacity  (d) enthalpy  (e) thermal conductance.

Description : Total heat of a substance is also known as  (a) internal energy  (b) entropy  (c) thermal capacity  (d) enthalpy  (e) thermal conductance.

Last Answer : Answer : d

If value of n is infinitely large in a polytropic process pV” = C, then the process is known as constant  (a) volume  (b) pressure  (c) temperature  (d) enthalpy  (e) entropy

Description : If value of n is infinitely large in a polytropic process pV” = C, then the process is known as constant  (a) volume  (b) pressure  (c) temperature  (d) enthalpy  (e) entropy

Last Answer : Answer : a

If you need to reverse the following reaction and multiply it by 2 in order for it to be an intermediate reaction in a Hess's law problem what would be the final value for the enthalpy of reaction yo?

Description : If you need to reverse the following reaction and multiply it by 2 in order for it to be an intermediate reaction in a Hess's law problem what would be the final value for the enthalpy of reaction yo?

Last Answer : 2820 kJ

If you need to reverse the following reaction in order for it to be an intermediate reaction in a Hess's law problem what would be the final value for the enthalpy of rea?

Description : If you need to reverse the following reaction in order for it to be an intermediate reaction in a Hess's law problem what would be the final value for the enthalpy of rea?

Last Answer : 286 kJ

If a system after undergoing a series of processes, returns to the initial state then  (a) process is thermodynamically in equilibrium  (b) process is executed in closed system cycle  (c) its entropy will change due to irreversibility  (d) sum of heat and work transfer will be zero  (e) no work will be done by the system.

Description : If a system after undergoing a series of processes, returns to the initial state then  (a) process is thermodynamically in equilibrium  (b) process is executed in closed system cycle  (c) its entropy will ... sum of heat and work transfer will be zero  (e) no work will be done by the system.

Last Answer : Answer : d

Which of the following is the other term used for enthalpy-entropy diagram?  a. Enthalpy diagram  b. Mollier diagram  c. Steam diagram  d. Entropy chart

Description : Which of the following is the other term used for enthalpy-entropy diagram?  a. Enthalpy diagram  b. Mollier diagram  c. Steam diagram  d. Entropy chart

Last Answer : Mollier diagram

Which of the following values characterize the state of the system?  a. cycle  b. process  c. property  d. enthalpy

Description : Which of the following values characterize the state of the system?  a. cycle  b. process  c. property  d. enthalpy

Last Answer : enthalpy

What happens to the internal energy of water at reference temperature where enthalpy is zero?  a. Becomes negative  b. Becomes positive  c. Remains constant  d. Cannot be defined

Description : What happens to the internal energy of water at reference temperature where enthalpy is zero?  a. Becomes negative  b. Becomes positive  c. Remains constant  d. Cannot be defined

Last Answer : Becomes negative

What is the measure of the energy that is no longer available to perform useful work within the current environment?  a. enthalpy  b. entropy  c. internal energy  d. latent heat

Description : What is the measure of the energy that is no longer available to perform useful work within the current environment?  a. enthalpy  b. entropy  c. internal energy  d. latent heat

Last Answer : entropy

Sum of the internal energy of a substance and the product of pressure and volume.  a. Specific Heat  b. Specific Gravity  c. Isolated System  d. Enthalpy

Description : Sum of the internal energy of a substance and the product of pressure and volume.  a. Specific Heat  b. Specific Gravity  c. Isolated System  d. Enthalpy

Last Answer : Enthalpy

A system having a rigid boundary that energy, work and mass does not cross its boundaries  a. Specific Heat  b. Specific Gravity  c. Isolated System  d. Enthalpy

Description : A system having a rigid boundary that energy, work and mass does not cross its boundaries  a. Specific Heat  b. Specific Gravity  c. Isolated System  d. Enthalpy

Last Answer : Isolated System

The 1st Law of Thermodynamics on what principle?  a. Conservation of Energy  b. Conservation of mass  c. Enthalpy  d. Isometric

Description : The 1st Law of Thermodynamics on what principle?  a. Conservation of Energy  b. Conservation of mass  c. Enthalpy  d. Isometric

Last Answer : Conservation of Energy

Gas being heated at constant volume is undergoing the process of.  a. isometric  b. specific heat  c. enthalpy  d. isothermal

Description : Gas being heated at constant volume is undergoing the process of.  a. isometric  b. specific heat  c. enthalpy  d. isothermal

Last Answer : isometric

Composite property applicable to all fluids  a. Entropy  b. Enthalpy  c. Specific Heat  d. None of the above

Description : Composite property applicable to all fluids  a. Entropy  b. Enthalpy  c. Specific Heat  d. None of the above

Last Answer : Enthalpy

_____ is that property of a substance which remains constant if no heat enters or leaves the substance, while it does work or alters its volume, but which increases or diminishes should a small amount of heat enter or leave.  a. Entrophy  b. Enthalpy  c. Specific Heat  d. None of the above

Description : _____ is that property of a substance which remains constant if no heat enters or leaves the substance, while it does work or alters its volume, but which increases or diminishes should a small amount of heat enter or leave.  a. Entrophy  b. Enthalpy  c. Specific Heat  d. None of the above

Last Answer : Entrophy

Steam is throttled to 0.1 MPa with 20 degrees of superheat. (a) What is the quality of throttled steam if its pressure is 0.75 MPa (b) What is the enthalpy of the process?  a) 97.6%,2713 kJ/kg  b) -97.6%, 2713 kJ/kg  c) 87.6%,3713 kJ/kg  d) -87.6%, 3713 kJ/kg

Description : Steam is throttled to 0.1 MPa with 20 degrees of superheat. (a) What is the quality of throttled steam if its pressure is 0.75 MPa (b) What is the enthalpy of the process?  a) 97.6%,2713 kJ/kg  b) -97.6%, 2713 kJ/kg  c) 87.6%,3713 kJ/kg  d) -87.6%, 3713 kJ/kg

Last Answer : 97.6%,2713 kJ/kg

Steam at 1000 lbf/ft^2 pressure and 300˚R has specific volume of 6.5 ft^3/lbm and a specific enthalpy of 9800 lbf-ft/lbm. Find the internal energy per pound mass of steam.  A.2500 lbf-ft/lbm  B.3300 lbf-ft/lbm  C.5400 lbf-ft/lbm  D.6900 lbf-ft/lbm Formula: h= u+ pV u= h– pV

Description : Steam at 1000 lbf/ft^2 pressure and 300˚R has specific volume of 6.5 ft^3/lbm and a specific enthalpy of 9800 lbf-ft/lbm. Find the internal energy per pound mass of steam.  A.2500 lbf-ft/lbm  B.3300 lbf-ft/lbm  C.5400 lbf-ft/lbm  D.6900 lbf-ft/lbm Formula: h= u+ pV u= h– pV

Last Answer : 3300 lbf-ft/lbm

A function of state that is associated with disorder in the system and environment.  a. enthalpy  b. entropy  c. law of diminishing return  d. Lenz’ Law

Description : A function of state that is associated with disorder in the system and environment.  a. enthalpy  b. entropy  c. law of diminishing return  d. Lenz’ Law

Last Answer : entropy

What predicts the approximate molar specific heat at high temperatures from the atomic weight?  A. Third law of thermodynamics  B. Law of Dulong and Petit  C. Mollier diagram  D. Pressure-enthalpy diagram

Description : What predicts the approximate molar specific heat at high temperatures from the atomic weight?  A. Third law of thermodynamics  B. Law of Dulong and Petit  C. Mollier diagram  D. Pressure-enthalpy diagram

Last Answer : Law of Dulong and Petit

The term “enthalpy” comes from Greek “enthalpen” which means ______.  A. Warm  B. Hot  C. Heat  D. Cold

Description : The term “enthalpy” comes from Greek “enthalpen” which means ______.  A. Warm  B. Hot  C. Heat  D. Cold

Last Answer : Heat

What refers to the measure of the disorder present in a given substance or system?  A. Enthalpy  B. Entropy  C. Heat capacity  D. Molar heat

Description : What refers to the measure of the disorder present in a given substance or system?  A. Enthalpy  B. Entropy  C. Heat capacity  D. Molar heat

Last Answer : Entropy

What is considered as the heat content of a system?  A. Enthalpy  B. Entropy  C. Internal heat  D. Molar heat

Description : What is considered as the heat content of a system?  A. Enthalpy  B. Entropy  C. Internal heat  D. Molar heat

Last Answer : Enthalpy

The free expansion process is a constant enthalpy process.  A. Correct  B. Incorrect

Description : The free expansion process is a constant enthalpy process.  A. Correct  B. Incorrect

Last Answer : Answer: A

According to first law of thermodynamics  (a) work done by a system is equal to heat transferred by the system  (b) total internal energy of a system during a process remains constant  (c) internal energy, enthalpy and entropy during a process remain constant  (d) total energy of a system remains constant

Description : According to first law of thermodynamics  (a) work done by a system is equal to heat transferred by the system  (b) total internal energy of a system during a process remains constant  ( ... , enthalpy and entropy during a process remain constant  (d) total energy of a system remains constant

Last Answer : Answer : d

For which of the following substances, the internal energy and enthalpy are the functions of temperature only  (a) any gas  (b) saturated steam  (c) water  (d) perfect gas  (e) superheated steam.

Description : For which of the following substances, the internal energy and enthalpy are the functions of temperature only  (a) any gas  (b) saturated steam  (c) water  (d) perfect gas  (e) superheated steam.

Last Answer : Answer : d

Which of the following parameters is constant for a mole for most of the gases at a given temperature and pressure  (a) enthalpy  (b) volume  (c) mass  (d) entropy  (e) specific volume.

Description : Which of the following parameters is constant for a mole for most of the gases at a given temperature and pressure  (a) enthalpy  (b) volume  (c) mass  (d) entropy  (e) specific volume.

Last Answer : Answer : b

Which of the following is the property of a system  (a) pressure and temperature  (b) internal energy  (c) volume and density  (d) enthalpy and entropy  (e) all of the above.

Description : Which of the following is the property of a system  (a) pressure and temperature  (b) internal energy  (c) volume and density  (d) enthalpy and entropy  (e) all of the above.

Last Answer : Answer : e

Which of the following events is heat exchange involved?  a. when there is a phase change  b. when there is a chemical reaction  c. when the gas expands adiabatically  d. when there is difference in temperature

Description : Which of the following events is heat exchange involved?  a. when there is a phase change  b. when there is a chemical reaction  c. when the gas expands adiabatically  d. when there is difference in temperature

Last Answer : when the gas expands adiabatically

A system is in ______ equilibrium of its chemical composition does not change with time, i.e., no chemical reaction occurs.  A. Chemical  B. Thermal  C. Mechanical  D. Phase

Description : A system is in ______ equilibrium of its chemical composition does not change with time, i.e., no chemical reaction occurs.  A. Chemical  B. Thermal  C. Mechanical  D. Phase

Last Answer : Chemical

_________ is the transition of a given substance from the solid to the gas phase with no intermediate liquid stage.  a. Convection  b. Conduction  c. Radiation  d. Sublimation

Description : _________ is the transition of a given substance from the solid to the gas phase with no intermediate liquid stage.  a. Convection  b. Conduction  c. Radiation  d. Sublimation

Last Answer : Sublimation