Draw symbol of (i) Tray Dryer (ii) Plate column (iii) Packed column (iv) Jaw crusher (v) Strirrer (vi) Ball mill.

Draw symbol of (i) Tray Dryer (ii) Plate column (iii) Packed column (iv) Jaw crusher (v) Strirrer (vi) Ball mill.
by

1 Answer

Answer :

i)Tray dryer:

image 

ii)Plate column: 

image 

iii)Packed column:

image 


iv) Jaw crusher:

image 

v) Stirrer:

image 

vi) Ball mill

image  

by

Related questions

Run of mine (ROM) coal is crushed by a __________ for use in domestic ovens. (A) Jaw crusher (B) Hammer crusher (C) Ball mill (D) Tube mil

Description : Run of mine (ROM) coal is crushed by a __________ for use in domestic ovens. (A) Jaw crusher (B) Hammer crusher (C) Ball mill (D) Tube mil

Last Answer : (B) Hammer crusher

Which of the following crushers can be considered as a combination of a jaw crusher and a roller crusher? (A) Rod mill (B) Fluid energy mill (C) Gyratory crusher (D) Ball mill

Description : Which of the following crushers can be considered as a combination of a jaw crusher and a roller crusher? (A) Rod mill (B) Fluid energy mill (C) Gyratory crusher (D) Ball mill

Last Answer : (C) Gyratory crusher

Energy requirement (per unit mass of material crushed/ground) is highest for (A) Jaw crusher (B) Rod mill (C) Ball mill (D) Fluid energy mil

Description : Energy requirement (per unit mass of material crushed/ground) is highest for (A) Jaw crusher (B) Rod mill (C) Ball mill (D) Fluid energy mil

Last Answer : (D) Fluid energy mil

Out of the following size reduction equipments, the maximum feed size can be accepted by the (A) Tube mill (B) Ball mill (C) Jaw crusher (D) Jet pulveriser

Description : Out of the following size reduction equipments, the maximum feed size can be accepted by the (A) Tube mill (B) Ball mill (C) Jaw crusher (D) Jet pulveriser

Last Answer : (C) Jaw crusher

Arrange the following size reduction equipment in the decreasing order of the average particle size produced by each of them. (A) Jaw crusher, Ball mill, Fluid energy mill(B) Ball mill, Jaw crusher, Fluid energy mill(C) Fluid energy mill, Jaw crusher, Ball mill(D) Fluid energy mill, Ball mill, Jaw crusher

Description : Arrange the following size reduction equipment in the decreasing order of the average particle size produced by each of them. (A) Jaw crusher, Ball mill, Fluid energy mill (B) Ball mill, Jaw crusher, Fluid ... C) Fluid energy mill, Jaw crusher, Ball mill (D) Fluid energy mill, Ball mill, Jaw crusher

Last Answer : (A) Jaw crusher, Ball mill, Fluid energy mill

Feed size of ≥ 25 cms can be accepted by (A) Ball mill (B) Rod mill (C) Fluid energy mill (D) Jaw crusherFeed size of ≥ 25 cms can be accepted by(A) Ball mill(B) Rod mill(C) Fluid energy mill(D) Jaw crusher

Description : Feed size of ≥ 25 cms can be accepted by (A) Ball mill (B) Rod mill (C) Fluid energy mill (D) Jaw crusher

Last Answer : (D) Jaw crusher

To get a fine talc powder from its granules, the equipment used is (A) Roller crusher (B) Ball mill (C) Jaw crusher (D) Gyratory crusher

Description : To get a fine talc powder from its granules, the equipment used is (A) Roller crusher (B) Ball mill (C) Jaw crusher (D) Gyratory crusher

Last Answer : (B) Ball mill

Write the safety measure in the following accidental cases: (i) Eye injury (chemical) (ii) Burn (iii) Skin contact (iv) Inhalation of toxic fumes.

Description : Write the safety measure in the following accidental cases: (i) Eye injury (chemical) (ii) Burn (iii) Skin contact (iv) Inhalation of toxic fumes.

Last Answer : Safety measures for: i)Eye injury : a) Have the person immediately rinse the eye with clean water. b) Flush with lukewarm water for 15-30 minutes c) Flush the eye to ... symptoms such as head ache, nose or throat irritation, dizziness or drowsiness persists, seek immediate medical attention.

Explain the following unit operations: (i) Mixing (ii) Drying (iii) Evaporation (iv) Absorption.

Description : Explain the following unit operations: (i) Mixing (ii) Drying (iii) Evaporation (iv) Absorption.

Last Answer : i)Mixing: Mixing is carried out for producing simple mixtures, accomplishing dispersions and promoting chemical reactions. It is a process in which two separate materials such as two different ... ammonia mixture by water 2) Removal of hydrogen sulfide from naturally occurring hydrocarbon gases.

Size reduction of fibrous materials like wood, asbestos, mica etc. is done by a disintegrator exemplified by the(A) Blake jaw crusher(B) Cage mill(C) Stamp mill(D) Bradford's breaker

Description : Size reduction of fibrous materials like wood, asbestos, mica etc. is done by a disintegrator exemplified by the (A) Blake jaw crusher (B) Cage mill (C) Stamp mill (D) Bradford's breaker

Last Answer : (B) Cage mill

Describe the following unit processes: (i) Pyrolysis (ii) Hydration (iii) Hydrogenation.

Description : Describe the following unit processes: (i) Pyrolysis (ii) Hydration (iii) Hydrogenation.

Last Answer : i)Pyrolysis: The decomposition of a compound by heat is called pyrolysis. Large alkane molecules are broken down to give lower molecular weight alkanes, alkenes and hydrogen. Eg: When ethane is heated to 500 ... Chemical Reaction for hydrogenation: CH2= CH2 + H2 → CH3-CH3 C6H6 + 3H2→C6H12

Explain the principle of the following – (i) Distillation (ii) Drying (iii) Crystallization

Description : Explain the principle of the following – (i) Distillation (ii) Drying (iii) Crystallization

Last Answer : Distillation:-Distillation is an operation in which the components of a liquid mixture are separated using thermal energy. It depends upon the difference in boiling points of the individual components. The ... temperature. The solute then comes out of the solution in the form of pure crystals.  

Explain following unit process with example. (i) Reduction (ii) Calcination (iii) Nitration

Description : Explain following unit process with example. (i) Reduction (ii) Calcination (iii) Nitration

Last Answer : Reduction: Reduction is defined as the addition of hydrogen, removal of oxygen, addition of metallic element or addition of electrons. Eg. Reduction of ethyl bromide Nitrobenzene can be reduced ... Sulfuric acid and con. Nitric acid.  Nitrating mixture is used in nitration reaction.

Explain following unit processes with suitable example. (i) Sulphonation (ii) Hydrogenation (iii) Esterification

Description : Explain following unit processes with suitable example. (i) Sulphonation (ii) Hydrogenation (iii) Esterification

Last Answer : (i) Sulfonation reactions : It is the reaction with sulfuric acid to introduce sulfonic (SO3H) group into a compound.   (ii) Hydrogenation: Hydrogenation may be defined as the chemical ... of ethyl acetate. Sulphuric acid and hydrochloric acids are the catalysts used for esterification.  

Draw a neat sketch of Electro-dialysis.

Description : Draw a neat sketch of Electro-dialysis.

Last Answer : Electro- dialysis:

Check whether the following are quadratic equations: (i) (x+ 1)2=2(x-3) (ii) x – 2x = (- 2) (3-x) (iii) (x – 2) (x + 1) = (x – 1) (x + 3) (iv) (x – 3) (2x + 1) = x (x + 5) (v) (2x – 1) (x – 3) = (x + 5) (x – 1) (vi) x2 + 3x + 1 = (x – 2)2 (vii) (x + 2)3 = 2x(x2 – 1) (viii) x3 -4x2 -x + 1 = (x-2)3 -Maths 10th

Description : Check whether the following are quadratic equations: (i) (x+ 1)2=2(x-3) (ii) x - 2x = (- 2) (3-x) (iii) (x - 2) (x + 1) = (x - 1) (x + 3) (iv) (x - 3) (2x + 1) = x (x + 5) (v) (2x - 1) (x - 3) = (x ... vi) x2 + 3x + 1 = (x - 2)2 (vii) (x + 2)3 = 2x(x2 - 1) (viii) x3 -4x2 -x + 1 = (x-2)3 -Maths 10th

Last Answer : this is the correct answer!

I have some matchsticks set up like this: I + XI = X. If you do not know Roman numerals, here is a quick starter: I=1 II=2 III=3 IV=4 V=5 VI=6 VII=7 VIII=8 IX=9 X=10 XI=11 XII=12 XIII=13 XIV=14 XV=15...... Of course, I + XI = X is wrong. You are told to move the minimum number of matchsticks to make the question correct. So, how many do you have to move? -Riddles

Description : I have some matchsticks set up like this: I + XI = X. If you do not know Roman numerals, here is a quick starter: I=1 II=2 III=3 IV=4 V=5 VI=6 VII=7 VIII=8 IX=9 X=10 XI=11 ... are told to move the minimum number of matchsticks to make the question correct. So, how many do you have to move? -Riddles

Last Answer : Most people would get to one move at the least, but the real answer is zero moves. If you rotate the whole question around 180 degrees, it will display this: X = IX + I

In ΔABC and ΔDEF, AB = DE, AB || DE, BC = EF and BC || EF. Vertices A, B and C are joined to vertices D, E and F respectively (see Fig. 8.22). Show that (i) quadrilateral ABED is a parallelogram (ii) quadrilateral BEFC is a parallelogram (iii) AD || CF and AD = CF (iv) quadrilateral ACFD is a parallelogram (v) AC = DF (vi) ΔABC ≅ ΔDEF. -Maths 9th

Description : In ΔABC and ΔDEF, AB = DE, AB || DE, BC = EF and BC || EF. Vertices A, B and C are joined to vertices D, E and F respectively (see Fig. 8.22). Show that (i) quadrilateral ABED is a parallelogram ( ... CF and AD = CF (iv) quadrilateral ACFD is a parallelogram (v) AC = DF (vi) ΔABC ≅ ΔDEF. -Maths 9th

Last Answer : . Solution: (i) AB = DE and AB || DE (Given) Two opposite sides of a quadrilateral are equal and parallel to each other. Thus, quadrilateral ABED is a parallelogram (ii) Again BC = EF and BC || EF ... (Given) BC = EF (Given) AC = DF (Opposite sides of a parallelogram) , ΔABC ≅ ΔDEF [SSS congruency]

For the complex [Fe(en)2Cl2], Cl, (en = ethylene diamine), identify (i) the oxidation number of iron, (ii) the hybrid orbitals and the shape of the complex, (iii) the magnetic behaviour of the complex, (iv) the number of geometrical isomers, (v) whether there is an optical isomer also, and (vi) name of the complex. (At. no. of Fe = 26) \ -Chemistry

Description : For the complex [Fe(en)2Cl2], Cl, (en = ethylene diamine), identify (i) the oxidation number of iron, (ii) the hybrid orbitals and the shape of the complex, (iii) the magnetic behaviour of the complex, (iv) ... an optical isomer also, and (vi) name of the complex. (At. no. of Fe = 26) \ -Chemistry

Last Answer : i) [Fe(en)2Cl2] Cl or x + 0 + 2 (-1) + (-1) = 0 x + (- 3) = 0 or x = + 3 ∴ Oxidation number of iron, x = + 3 (ii) The complex has two bidentate ligands and two ... )2Cl2] Cl, only cis-isomer shows optical isomerism. (vi) Name of complex: Dichloridobis (ethane-1, 2- diamine) Iron (III) chloride

What percentage is (i) Rs 15 of Rs 120? (ii) 36 minutes of 2 hours? (iii) 8 hours of 2 days (iv) 160 metres of 4 km? (v) 175 mL of 1 litre? (vi) 25 paise of Rs 4? -Maths

Description : What percentage is (i) Rs 15 of Rs 120? (ii) 36 minutes of 2 hours? (iii) 8 hours of 2 days (iv) 160 metres of 4 km? (v) 175 mL of 1 litre? (vi) 25 paise of Rs 4? -Maths

Last Answer : answer:

Find: (i) 25% of Rs 76 (ii) 20% of Rs 132 (iii) 7.5% of 600 m (iv) 313% of 90 km (v) 8.5% of 5 kg (vi) 20% of 12 litres -Maths

Description : Find: (i) 25% of Rs 76 (ii) 20% of Rs 132 (iii) 7.5% of 600 m (iv) 313% of 90 km (v) 8.5% of 5 kg (vi) 20% of 12 litres -Maths

Last Answer : answer:

Find: (i) 32% of 425 (ii) 1623% of 16 (iii) 6.5% of 400 (iv) 136% of 70 (v) 2.8% of 35 (vi) 0.6% of 45 -Maths

Description : Find: (i) 32% of 425 (ii) 1623% of 16 (iii) 6.5% of 400 (iv) 136% of 70 (v) 2.8% of 35 (vi) 0.6% of 45 -Maths

Last Answer : answer:

Convert each of the following fraction into a percentage: (i) 47 100 (ii) 9 20 (iii) 3 8 (iv) 8 125 (v) 19 500 (vi) 4 15 (vii) 2 3 (viii) 1 3 5 -Maths

Description : Convert each of the following fraction into a percentage: (i) 47 100 (ii) 9 20 (iii) 3 8 (iv) 8 125 (v) 19 500 (vi) 4 15 (vii) 2 3 (viii) 1 3 5 -Maths

Last Answer : We have the following: (i) 47100=47100×100% = 47% (ii) 920=920×100% =9×5%= 45% (iii) 38=38×100% =3×252%=752%=3712% (iv) 8125=8125×100%=8×45%=325%=6.4% (v) ... ;203%=803%=2623% (vii) 23=23×100%=2003%=6623% (viii) 135=85=85×100%=(8×20)%=160%

Convert each of the following into a fraction: (i) 32% (ii) 614% (iii) 2623% (iv) 120% (v) 6.25% (vi) 0.8% (vii) 0.06% (viii) 22.75% -Maths

Description : Convert each of the following into a fraction: (i) 32% (ii) 614% (iii) 2623% (iv) 120% (v) 6.25% (vi) 0.8% (vii) 0.06% (viii) 22.75% -Maths

Last Answer : answer:

Evaluate each of the following: (i) (103)3 (ii) (98)3 (iii) (9.9)3 (iv) (10.4)3 (v) (598)3 (vi) (99)3 -Maths 9th

Description : Evaluate each of the following: (i) (103)3 (ii) (98)3 (iii) (9.9)3 (iv) (10.4)3 (v) (598)3 (vi) (99)3 -Maths 9th

Last Answer : answer:

Cold dil. `H_(2)SO_(4)` will completely dissolve : (i) Pb (ii) `Fe_(3)O_(4)` (iii) Fe (iv) Cu (v) Mg (vi) MgO (vii) `CoCO_(3)` (viii) `CuCO_(2)` (ix)

Description : Cold dil. `H_(2)SO_(4)` will completely dissolve : (i) Pb (ii) `Fe_(3)O_(4)` (iii) Fe (iv) Cu (v) Mg (vi) MgO (vii) `CoCO_(3)` (viii) `CuCO_(2)` (ix)

Last Answer : Cold dil. `H_(2)SO_(4)` will completely dissolve : (i) Pb (ii) `Fe_(3)O_(4)` (iii) Fe (iv) Cu (v) ... ) `CoCO_(3)` (viii) `CuCO_(2)` (ix) `SrCO_(3)`

Cold conc. `HNO_(3)` will completely dissolve: (i) Pb (ii) `Pb_(3)O_(4)` (iii) Fe (iv) Sn (v) Mg (vi) MgO (vii) Hg (viii) Au (ix) Ag (x) Pt

Description : Cold conc. `HNO_(3)` will completely dissolve: (i) Pb (ii) `Pb_(3)O_(4)` (iii) Fe (iv) Sn (v) Mg (vi) MgO (vii) Hg (viii) Au (ix) Ag (x) Pt

Last Answer : Cold conc. `HNO_(3)` will completely dissolve: (i) Pb (ii) `Pb_(3)O_(4)` (iii) Fe (iv) Sn (v) Mg (vi) MgO (vii) Hg (viii) Au (ix) Ag (x) Pt

(i) `NH_(3)` (ii) `N_(2)H_(4)` (iii) `HN_(3)` (iv) `PH_(3)` (v) `H_(2)S` (vi) `AsH_(3)` (vii) `SbH_(3)` (viii) `H_(2)Se` (ix) `H_(2)Te` Number of mole

Description : (i) `NH_(3)` (ii) `N_(2)H_(4)` (iii) `HN_(3)` (iv) `PH_(3)` (v) `H_(2)S` (vi) `AsH_(3)` (vii) `SbH_(3)` (viii) `H_(2)Se` (ix) `H_(2)Te` Number of mole

Last Answer : (i) `NH_(3)` (ii) `N_(2)H_(4)` (iii) `HN_(3)` (iv) `PH_(3)` (v) `H_(2) ... lone pair of electrons on the central atom is present in pure s-orbital

Cold dil. `H_(2)SO_(4)` will completely dissolve : (i) Pb (ii) `Fe_(3)O_(4)` (iii) Fe (iv) Cu (v) Mg (vi) MgO (vii) `CoCO_(3)` (viii) `CuCO_(2)` (ix)

Description : Cold dil. `H_(2)SO_(4)` will completely dissolve : (i) Pb (ii) `Fe_(3)O_(4)` (iii) Fe (iv) Cu (v) Mg (vi) MgO (vii) `CoCO_(3)` (viii) `CuCO_(2)` (ix)

Last Answer : Cold dil. `H_(2)SO_(4)` will completely dissolve : (i) Pb (ii) `Fe_(3)O_(4)` (iii) Fe (iv) Cu (v) ... ) `CoCO_(3)` (viii) `CuCO_(2)` (ix) `SrCO_(3)`

Cold conc. `HNO_(3)` will completely dissolve: (i) Pb (ii) `Pb_(3)O_(4)` (iii) Fe (iv) Sn (v) Mg (vi) MgO (vii) Hg (viii) Au (ix) Ag (x) Pt

Description : Cold conc. `HNO_(3)` will completely dissolve: (i) Pb (ii) `Pb_(3)O_(4)` (iii) Fe (iv) Sn (v) Mg (vi) MgO (vii) Hg (viii) Au (ix) Ag (x) Pt

Last Answer : Cold conc. `HNO_(3)` will completely dissolve: (i) Pb (ii) `Pb_(3)O_(4)` (iii) Fe (iv) Sn (v) Mg (vi) MgO (vii) Hg (viii) Au (ix) Ag (x) Pt

(i) `NH_(3)` (ii) `N_(2)H_(4)` (iii) `HN_(3)` (iv) `PH_(3)` (v) `H_(2)S` (vi) `AsH_(3)` (vii) `SbH_(3)` (viii) `H_(2)Se` (ix) `H_(2)Te` Number of mole

Description : (i) `NH_(3)` (ii) `N_(2)H_(4)` (iii) `HN_(3)` (iv) `PH_(3)` (v) `H_(2)S` (vi) `AsH_(3)` (vii) `SbH_(3)` (viii) `H_(2)Se` (ix) `H_(2)Te` Number of mole

Last Answer : (i) `NH_(3)` (ii) `N_(2)H_(4)` (iii) `HN_(3)` (iv) `PH_(3)` (v) `H_(2) ... lone pair of electrons on the central atom is present in pure s-orbital

How many of following metals impart a characteristic colour to the Bunsen flame ? `(i) Na " " (ii) Li " " (iii) K " " (iv) Ba` `(v) Sr " " (vi) Mg " "

Description : How many of following metals impart a characteristic colour to the Bunsen flame ? `(i) Na " " (ii) Li " " (iii) K " " (iv) Ba` `(v) Sr " " (vi) Mg " "

Last Answer : How many of following metals impart a characteristic colour to the Bunsen flame ? `(i) Na " " (ii) Li " " (iii) K ... ix) `Be " " (x )Ca " " (x i)Cu`

Number of oxide orwesd among , (i) Cassiterite (ii) pyrolusite (iii) Kieserite (iv) Azurite (V) chromite (vi) siderite are.

Description : Number of oxide orwesd among , (i) Cassiterite (ii) pyrolusite (iii) Kieserite (iv) Azurite (V) chromite (vi) siderite are.

Last Answer : Number of oxide orwesd among , (i) Cassiterite (ii) pyrolusite (iii) Kieserite (iv) Azurite (V) chromite (vi) siderite are.

How many of the following are oxides ores (i) Carnalite (ii) Cuprite (iii) Cassiterite (iv) Chromite (v) Cinnabar (vi) Calamine (vii) Cerussite (Viii)

Description : How many of the following are oxides ores (i) Carnalite (ii) Cuprite (iii) Cassiterite (iv) Chromite (v) Cinnabar (vi) Calamine (vii) Cerussite (Viii)

Last Answer : How many of the following are oxides ores (i) Carnalite (ii) Cuprite (iii) Cassiterite (iv) ... (vii) Cerussite (Viii) Chalocopyrite (ix) Chalcocite

Differentiate between any five of the following. (i) Artery and vein (ii) Hard water and soft water (iii) E-mail and Snail mail (iv) Apes and monkey (v) Hydrostatics and hydrodynamics (vi) Comet and meteor (vii) Barrage and dam (viii) Electron and hole (ix) Isobars and isotopes (x) Autopsy and biopsy

Description : Differentiate between any five of the following. (i) Artery and vein (ii) Hard water and soft water (iii) E-mail and Snail mail (iv) Apes and monkey (v) Hydrostatics and hydrodynamics (vi) Comet and ... (vii) Barrage and dam (viii) Electron and hole (ix) Isobars and isotopes (x) Autopsy and biopsy

Last Answer : Answers: (i) Artery and vein: Arteries: Muscular blood vessels that carry blood away from the heart. All arteries, with the exception of the pulmonary and umbilical arteries, carry oxygenated blood ... to determine cause of death Biopsy: Removal and study of a tissue sample for diagnostic purposes

Name the quantities which are measured by the following units. (i) Newton (ii) Joule (iii) Watt (iv) Volt (v) Light year (vi) Angstrom (vii) Acre-foot (viii) Becquerel (ix) Hertz (x) Cusec

Description : Name the quantities which are measured by the following units. (i) Newton (ii) Joule (iii) Watt (iv) Volt (v) Light year (vi) Angstrom (vii) Acre-foot (viii) Becquerel (ix) Hertz (x) Cusec

Last Answer : Answers: (i) Force (ii) Work Energy (iii) Power of electricity (iv) Potential difference (v) Distance of stars and planets (vi) Length (vii) Volume (viii) Radioactivity (ix) Frequency (x) Rate of flow of water

Which quantity do the following units measure: (i) Volt (ii) Coulomb (iii) Walt (iv) Ohm (v) Mho (vi) Ampere (vii) Dyne (viii) Celsius (ix) Joule (x) Calorie

Description : Which quantity do the following units measure: (i) Volt (ii) Coulomb (iii) Walt (iv) Ohm (v) Mho (vi) Ampere (vii) Dyne (viii) Celsius (ix) Joule (x) Calorie

Last Answer : Answers: (i) Voltage (ii) Charge of Electricity (iii) Power (iv) Resistance (v) Conductivity (vi) Current (vii) Force (viii) Temperature (ix) Energy (x) Heat

Arrange the following steps to form a basic Engineering Process Model.i. Test ii. Design iii. Install iv. Specification v. Manufacture vi. Maintain a) 2, 4, 5, 1, 6, 3 b) 4, 2, 5, 1, 3, 6 c) 2, 4, 5, 1, 3, 6 d) 4, 2, 5, 1, 6, 3

Description : Arrange the following steps to form a basic Engineering  Process Model. i. Test ii. Design iii. Install iv. Specification v. Manufacture vi. Maintain a) 2, 4, 5, 1, 6, 3 b) 4, 2, 5, 1, 3, 6 c) 2, 4, 5, 1, 3, 6 d) 4, 2, 5, 1, 6, 3

Last Answer : a) 2, 4, 5, 1, 6, 3

The figure given below depicts a diagrammatic sectional view of the human female reproductive system. Which set of three parts out of I-VI have been correctly identified? I II III V VI IV (a) (II) Endometrium, (III) Infundibulum, (IV) Fimbriae (b) (III) Infundibulum, (IV) Fimbriae, (V) Cervix (c) (IV) Oviducal funnel, (V) Uterus, (VI) Cervix (d) (I) Perimetrium, (II) Myometrium, (III) Fallopian tube

Description : The figure given below depicts a diagrammatic sectional view of the human female reproductive system. Which set of three parts out of I-VI have been correctly identified? I II III V VI IV (a) (II) ... , (V) Uterus, (VI) Cervix (d) (I) Perimetrium, (II) Myometrium, (III) Fallopian tube

Last Answer : (b) (III) Infundibulum, (IV) Fimbriae, (V) Cervix

Identify the components labelled A, B, C and D in the diagram below from the list (i) to (viii) given along withComponents : (i) Cristae of mitochondria (ii) Inner membrane of mitochondria (iii) Cytoplasm (iv) Smooth endoplasmic reticulum (v) Rough endoplasmic reticulum (vi) Mitochondrial matrix (vii) Cell vacuole (viii) Nucleus The correct components are: A B C D (a) (v) (iv) (viii) (iii) (b) (i) (iv) (viii) (vi) (c) (vi) (v) (iv) (vii) (d) (v) (i) (iii) (ii)

Description : Identify the components labelled A, B, C and D in the diagram below from the list (i) to (viii) given along with Components : (i) Cristae of mitochondria (ii) Inner membrane of mitochondria (iii) Cytoplasm (iv) Smooth endoplasmic ... viii) (vi) (c) (vi) (v) (iv) (vii) (d) (v) (i) (iii) (ii)

Last Answer : (a) (v) (iv) (viii) (iii)

Which of the following instruction is of logical instructions? i) CPL A ii) JC rel iii) DA A iv) ANL A, Rn v) RR A vi) CPL bit a) i, v b) v, iii, I c) iv, ii d) v, iii, ii

Description : Which of the following instruction is of logical instructions? i) CPL A ii) JC rel iii) DA A iv) ANL A, Rn v) RR A vi) CPL bit a) i, v b) v, iii, I c) iv, ii d) v, iii, ii

Last Answer : c) iv, i

A company has to choose between two projects whose cash flows are as indicated below; Project 1: i. Investment – Rs. 15 Lakhs ii. Annual cost savings – Rs. 4 lakhs. iii. Bi-annual maintenance cost – Rs. 50,000/- iv. Reconditioning and overhaul during 5th year: 6 lakhs v. Life of the project – 8 years vi. Salvage value – Rs. 5 lakhs Project 2: vii. Investment – Rs. 14 Lakhs viii. Annual cost savings – Rs. 3.5 lakhs. ix. Annual Maintenance cost – Rs. 20,000/- x. Reconditioning and overhaul during 4th year: 5 lakhs xi. Life of the project – 8 years xii. Salvage Value- 2 lakhs Which project should the company choose? The annual discount rate is 12

Description :  A company has to choose between two projects whose cash flows are as indicated  below; Project 1:  i. Investment - Rs. 15 Lakhs ii. Annual cost savings - Rs. 4 lakhs. iii. Bi-annual ... years xii. Salvage Value- 2 lakhs Which project should the company choose? The annual discount rate is 12

Last Answer : Year Project 1 Project 2 Outgo Saving NPV Outgo Saving NPV 0 15.0 0 =-15.0 14.0 0 = -14 1 0 4.0 = (4 / (1+.12)1 = 3.571 0.2 3.5 = (3.3 / (1+.12)1 = 2.95 2 0.5 4.0 = (3.5 / (1+.12)2 = 2.79 0.2 3.5 ... (1+.12)8 = 3.43 0.2 5.5  (3.5+2) = (5.3 / (1+.12)8 = 2.14 NPV = + 2.301 @12% = + 0.15

Write the suitable cutter for carrying following operations on milling machine (i) Gear Tooth (ii) Parting off (iii) Keyway (iv) V-grooves (v) Rounding of corner (vi) Cutting of narrow slot and groove

Description : Write the suitable cutter for carrying following operations on milling machine (i) Gear Tooth (ii) Parting off (iii) Keyway (iv) V-grooves (v) Rounding of corner (vi) Cutting of narrow slot and groove

Last Answer : (i) Gear Tooth : Form milling cutter, Cylindrical type or End mill type, Gear cutter. (ii) Parting off: Slitting Cutter (iii) Keyway : Staggered teeth side milling cutter, End mill cutter, key ... milling cutter. Selection of a cutter depends upon type and size of slot or groove to be produced. 

Write type of chip formed with following factors. (i) High rake angle (ii) High cutting speed (iii) Small depth of cut (iv) Low cutting speed (v) Large depth of cut (vi) Low rake angle

Description : Write type of chip formed with following factors. (i) High rake angle (ii) High cutting speed (iii) Small depth of cut (iv) Low cutting speed (v) Large depth of cut (vi) Low rake angle

Last Answer : (i) High rake angle : Continuous chips (ii) High cutting speed : Continuous chips (iii) Small depth of cut : Continuous chips (iv) Low cutting speed :Continuous chips with built up edge (v) ... cut : Continuous chips with built up edge (vi) Low rake angle :Continuous chips with built up edge

Compare detonation and diesel knock on the basis of (i) Fuel Ignition Temperature (ii) Compression Ratio (iii) Speed (iv) inlet temperature (v) inlet pressure (vi) cylinder wall temperature (vii) cylinder size

Description : Compare detonation and diesel knock on the basis of (i) Fuel Ignition Temperature (ii) Compression Ratio (iii) Speed (iv) inlet temperature (v) inlet pressure (vi) cylinder wall temperature (vii) cylinder size 

Last Answer : Comparison between detonation and diesel knock: Parameter To avoid Detonation in SI Engine  To avoid Diesel knock i) Fuel Ignition Temperature High Low ii) Compression Ratio ... Cylinder wall temperature Low High viii) Cylinder size Small Large