Write the suitable cutter for carrying following operations on milling machine (i) Gear Tooth (ii) Parting off (iii) Keyway (iv) V-grooves (v) Rounding of corner (vi) Cutting of narrow slot and groove

Write the suitable cutter for carrying following operations on milling machine (i) Gear Tooth (ii) Parting off (iii) Keyway (iv) V-grooves (v) Rounding of corner (vi) Cutting of narrow slot and groove
by

1 Answer

Answer :

(i) Gear Tooth : Form milling cutter, Cylindrical type or End mill type, Gear cutter.

(ii) Parting off: Slitting Cutter

(iii) Keyway : Staggered teeth side milling cutter, End mill cutter, key way cutter

(iv) V-grooves : Angular milling cutter

(v) Rounding of corner : Profile milling cutter, Formed cutter, Corner Rounding Milling Cutters.

(vi) Cutting of narrow slot and groove : Slot milling operation can use any type of milling cutter like plain milling cutter, metal slitting saw or side milling cutter. Selection of a cutter depends upon type and size of slot or groove to be produced. 
by

Related questions

Write type of chip formed with following factors. (i) High rake angle (ii) High cutting speed (iii) Small depth of cut (iv) Low cutting speed (v) Large depth of cut (vi) Low rake angle

Description : Write type of chip formed with following factors. (i) High rake angle (ii) High cutting speed (iii) Small depth of cut (iv) Low cutting speed (v) Large depth of cut (vi) Low rake angle

Last Answer : (i) High rake angle : Continuous chips (ii) High cutting speed : Continuous chips (iii) Small depth of cut : Continuous chips (iv) Low cutting speed :Continuous chips with built up edge (v) ... cut : Continuous chips with built up edge (vi) Low rake angle :Continuous chips with built up edge

In finish machining of an island on a casting with CNC milling machine, an end mill with 10 mm diameter is employed. The corner points of the island are represented by (0, 0), (0, 30), (50, 30) and (50, 0). By applying cutter radius right compensation, the trajectory of the cutter will be a.(-5, 0), (-5, 35), (55, 35), (55,-5), (-5,-5) b.(0,-5), (55,-5), (55, 35), (-5, 35), (-5,-5) c.(5, 5), (5, 25), (45, 25), (45, 5), (5, 5) d.(5, 5), (45, 5), (45, 25), (5, 25), (5, 5)

Description : In finish machining of an island on a casting with CNC milling machine, an end mill with 10 mm diameter is employed. The corner points of the island are represented by (0, 0), (0, 30), (50, 30) and (50, 0). By applying cutter radius right ... , 5), (5, 5) d.(5, 5), (45, 5), (45, 25), (5, 25), (5, 5)

Last Answer : a.(-5, 0), (-5, 35), (55, 35), (55,-5), (-5,-5)

Identify type of BJT configuration having following features : (i) BJT configuration having the least current gain. (ii) KIT configuration called as voltage follower. (iii) BJT configuration having current gain less than one. (iv) BJT configuration suitable for impedance matching. (v) BIT configuration suitable for voltage amplification. (vi) BJT configuration having the least output impedance.

Description : Identify type of BJT configuration having following features : (i) BJT configuration having the least current gain. (ii) KIT configuration called as voltage follower. (iii) BJT ... configuration suitable for voltage amplification. (vi) BJT configuration having the least output impedance.  

Last Answer : (i) BJT configuration having the least current gain : Common Base Configuration  (ii) KIT configuration called as voltage follower: Common Collector Configuration  (iii) BJT ... Emitter Configuration  (vi) BJT configuration having the least output impedance: Common Collector Configuration

Choose proper machine tool and explain operation method for the following: (i) Producing a hole (ii) Finishing previously drilled hole

Description : Choose proper machine tool and explain operation method for the following: (i) Producing a hole (ii) Finishing previously drilled hole

Last Answer : MACHINE TOOL : Drilling Machine (i) Producing a hole: Drilling operation (Fig 1 mark ,explanation 2 mark) : It is an operation of producing a circular hole in a work piece by forcing a drill against ... is held in the tailstock and it is fed into the hole in the similar way as for drilling.  

Describe the single point cutting tool with nomenclature.

Description : Describe the single point cutting tool with nomenclature. 

Last Answer : Terminology used in Single Point Cutting Tool: Size: It is determined by the width of shank, height of shank and overall length. Shank: Shank is main body of a tool. It is held in a holder. Flank : ... If the slope is away from the cutting edge, it is positive side rake angle. OR

Describe the mechanism of chip formation during metal cutting with the help of sketch.

Description : Describe the mechanism of chip formation during metal cutting with the help of sketch.

Last Answer : Mechanism of chip formation : In Fig. the tool is considered stationary, and the work piece moves to the right. The metal is severely compressed in the area in front of the cutting tool. This causes ... movement transferred to the next element. The process is repetitive and a chip is formed. 

Explain the nomenclature of a single point cutting tool.

Description : Explain the nomenclature of a single point cutting tool.

Last Answer : 1. Back Rake Angle: Back rake angle is the angle between the face of the single point cutting tool and a line parallel with base of the tool measured in a perpendicular plane through the side cutting ... the side of the shank. It is responsible for turning the chip away from the finished surface. 

State any four properties of cutting fluid.

Description : State any four properties of cutting fluid.

Last Answer : Properties of cutting fluid:  1. High heat absorption 2. Good lubricating qualities to produce low coefficient of friction 3. Low viscosity to permit free flow of liquid 4. Non-corrosive to the ... to the skin of operator 8. Transparency so that the cutting action of the tool may be observed

Define cutting speed and feed in metal cutting process.

Description : Define cutting speed and feed in metal cutting process.

Last Answer : Cutting Speed: Cutting speed is defined as the speed at which the work moves with respect to the tool (usually measured in feet per minute).  Feed : Feed is defined as the distance the tool travels during one revolution of the part. 

State four operations performed by the lathe.

Description : State four operations performed by the lathe.

Last Answer : Operations performed on lathe machine  1. Facing, 2. Plain turning, 3. Step turning, 4. Taper turning, 5. Drilling, 6. Reaming, 7. Boring, 8. Undercutting, 9. Threading, 10. Knurling

Define following terms (i) Kinematic link (ii) Kinematic pair (iii) Kinematic chain (iv) Mechanism (v) Machine (vi) Inversion

Description : Define following terms (i) Kinematic link (ii) Kinematic pair (iii) Kinematic chain (iv) Mechanism (v) Machine (vi) Inversion

Last Answer : (i) Kinematic link: Each part of a machine, which moves relative to some other part, is known as a kinematic link.  (ii) Kinematic pair: The two links or elements of a machine, ... obtaining different mechanisms by fixing different links in a kinematic chain is known as inversion of the mechanism.

Explain the use of following tools in carrying out electrical wiring installation: (i) Nose pliers (ii) Test lamps (iii) Crimping tools (iv) Cutter.

Description : Explain the use of following tools in carrying out electrical wiring installation: (i) Nose pliers (ii) Test lamps (iii) Crimping tools (iv) Cutter. 

Last Answer : (i) Nose pliers : To hold and tight the wires (ii) Test lamps: Verification of voltage & current in the system and also check the open circuit (iii) Crimping tools: for crimping of the lugs for wires and cables (iv) Cutter: To cut the wire and remove the insulation 

Use suitable pattern for producing circular part in foundry.

Description : Use suitable pattern for producing circular part in foundry.

Last Answer : Sweep pattern: Sweep patterns are used for forming large circular moulds of symmetric kind by revolving a sweep attached to a spindle as shown in Fig. Actually a sweep is a template of wood or metal and is ... use of a central pivot. A segment pattern for a wheel rim is shown in fig. 

Use suitable pattern allowance to compensate the shrinkage problem during casting process.

Description : Use suitable pattern allowance to compensate the shrinkage problem during casting process.

Last Answer : Shrinkage Allowance: As metal solidifies and cools, it shrinks and contracts in size. To compensate for this, a pattern is made larger than the finished casting by means of a shrinkage or ... are reduced by gates & risers Solid contraction can be reduced by providing more allowance on pattern 

Explain keyway milling process with standard milling cutters.

Description : Explain keyway milling process with standard milling cutters.

Last Answer : Keyway Milling Operation: This milling process produce keyway slot. The cutter use if thin size. This operation suited for long keyways. The position of the cutter is shown in figure. Standard ... and then the cut is taken. Woodruff key is produced by using a woodruff key slot cutter.

In cell formation using production flow analysis, the following process will be left out of theanalysis a.Grinding b.Milling c.Drilling d.Gear cutting

Description : In cell formation using production flow analysis, the following process will be left out of theanalysis a.Grinding b.Milling c.Drilling d.Gear cutting

Last Answer : d.Gear cutting

Describe with neat sketch specification of lathe machine.

Description : Describe with neat sketch specification of lathe machine.

Last Answer : 1. The height of the centers measured from the lathe bed. 2. The swing diameter over bed. This is the largest diameter of work that will revolve without touching the bed and is twice the height of ... 6. The length of bed. This indicates the approximate floor space occupied by the lathe. 

List any four drilling machine used in industrial sector.

Description : List any four drilling machine used in industrial sector.

Last Answer : Classification of drilling machine: 1. Portable drilling machine 2. Bench drilling machine 3. Sensitive drilling machine 4. Upright or column drilling machine 5. Radial drilling machine 6. ... machine 8. Vertical drilling machine 9. Automatic drilling machine 10. Deep hole drilling machine

Define machine tool.

Description : Define machine tool.

Last Answer : A machine tool is a power driven machine form making articles of a given shape , size and accuracy( according to blueprints) by removing metal from workpieces in the form of chips. Most machine tools perform the ... one or both of these( 1 and 2) 4. Provide a feeding motion to one of these.

Check whether the following are quadratic equations: (i) (x+ 1)2=2(x-3) (ii) x – 2x = (- 2) (3-x) (iii) (x – 2) (x + 1) = (x – 1) (x + 3) (iv) (x – 3) (2x + 1) = x (x + 5) (v) (2x – 1) (x – 3) = (x + 5) (x – 1) (vi) x2 + 3x + 1 = (x – 2)2 (vii) (x + 2)3 = 2x(x2 – 1) (viii) x3 -4x2 -x + 1 = (x-2)3 -Maths 10th

Description : Check whether the following are quadratic equations: (i) (x+ 1)2=2(x-3) (ii) x - 2x = (- 2) (3-x) (iii) (x - 2) (x + 1) = (x - 1) (x + 3) (iv) (x - 3) (2x + 1) = x (x + 5) (v) (2x - 1) (x - 3) = (x ... vi) x2 + 3x + 1 = (x - 2)2 (vii) (x + 2)3 = 2x(x2 - 1) (viii) x3 -4x2 -x + 1 = (x-2)3 -Maths 10th

Last Answer : this is the correct answer!

I have some matchsticks set up like this: I + XI = X. If you do not know Roman numerals, here is a quick starter: I=1 II=2 III=3 IV=4 V=5 VI=6 VII=7 VIII=8 IX=9 X=10 XI=11 XII=12 XIII=13 XIV=14 XV=15...... Of course, I + XI = X is wrong. You are told to move the minimum number of matchsticks to make the question correct. So, how many do you have to move? -Riddles

Description : I have some matchsticks set up like this: I + XI = X. If you do not know Roman numerals, here is a quick starter: I=1 II=2 III=3 IV=4 V=5 VI=6 VII=7 VIII=8 IX=9 X=10 XI=11 ... are told to move the minimum number of matchsticks to make the question correct. So, how many do you have to move? -Riddles

Last Answer : Most people would get to one move at the least, but the real answer is zero moves. If you rotate the whole question around 180 degrees, it will display this: X = IX + I

In ΔABC and ΔDEF, AB = DE, AB || DE, BC = EF and BC || EF. Vertices A, B and C are joined to vertices D, E and F respectively (see Fig. 8.22). Show that (i) quadrilateral ABED is a parallelogram (ii) quadrilateral BEFC is a parallelogram (iii) AD || CF and AD = CF (iv) quadrilateral ACFD is a parallelogram (v) AC = DF (vi) ΔABC ≅ ΔDEF. -Maths 9th

Description : In ΔABC and ΔDEF, AB = DE, AB || DE, BC = EF and BC || EF. Vertices A, B and C are joined to vertices D, E and F respectively (see Fig. 8.22). Show that (i) quadrilateral ABED is a parallelogram ( ... CF and AD = CF (iv) quadrilateral ACFD is a parallelogram (v) AC = DF (vi) ΔABC ≅ ΔDEF. -Maths 9th

Last Answer : . Solution: (i) AB = DE and AB || DE (Given) Two opposite sides of a quadrilateral are equal and parallel to each other. Thus, quadrilateral ABED is a parallelogram (ii) Again BC = EF and BC || EF ... (Given) BC = EF (Given) AC = DF (Opposite sides of a parallelogram) , ΔABC ≅ ΔDEF [SSS congruency]

For the complex [Fe(en)2Cl2], Cl, (en = ethylene diamine), identify (i) the oxidation number of iron, (ii) the hybrid orbitals and the shape of the complex, (iii) the magnetic behaviour of the complex, (iv) the number of geometrical isomers, (v) whether there is an optical isomer also, and (vi) name of the complex. (At. no. of Fe = 26) \ -Chemistry

Description : For the complex [Fe(en)2Cl2], Cl, (en = ethylene diamine), identify (i) the oxidation number of iron, (ii) the hybrid orbitals and the shape of the complex, (iii) the magnetic behaviour of the complex, (iv) ... an optical isomer also, and (vi) name of the complex. (At. no. of Fe = 26) \ -Chemistry

Last Answer : i) [Fe(en)2Cl2] Cl or x + 0 + 2 (-1) + (-1) = 0 x + (- 3) = 0 or x = + 3 ∴ Oxidation number of iron, x = + 3 (ii) The complex has two bidentate ligands and two ... )2Cl2] Cl, only cis-isomer shows optical isomerism. (vi) Name of complex: Dichloridobis (ethane-1, 2- diamine) Iron (III) chloride

What percentage is (i) Rs 15 of Rs 120? (ii) 36 minutes of 2 hours? (iii) 8 hours of 2 days (iv) 160 metres of 4 km? (v) 175 mL of 1 litre? (vi) 25 paise of Rs 4? -Maths

Description : What percentage is (i) Rs 15 of Rs 120? (ii) 36 minutes of 2 hours? (iii) 8 hours of 2 days (iv) 160 metres of 4 km? (v) 175 mL of 1 litre? (vi) 25 paise of Rs 4? -Maths

Last Answer : answer:

Find: (i) 25% of Rs 76 (ii) 20% of Rs 132 (iii) 7.5% of 600 m (iv) 313% of 90 km (v) 8.5% of 5 kg (vi) 20% of 12 litres -Maths

Description : Find: (i) 25% of Rs 76 (ii) 20% of Rs 132 (iii) 7.5% of 600 m (iv) 313% of 90 km (v) 8.5% of 5 kg (vi) 20% of 12 litres -Maths

Last Answer : answer:

Find: (i) 32% of 425 (ii) 1623% of 16 (iii) 6.5% of 400 (iv) 136% of 70 (v) 2.8% of 35 (vi) 0.6% of 45 -Maths

Description : Find: (i) 32% of 425 (ii) 1623% of 16 (iii) 6.5% of 400 (iv) 136% of 70 (v) 2.8% of 35 (vi) 0.6% of 45 -Maths

Last Answer : answer:

Convert each of the following fraction into a percentage: (i) 47 100 (ii) 9 20 (iii) 3 8 (iv) 8 125 (v) 19 500 (vi) 4 15 (vii) 2 3 (viii) 1 3 5 -Maths

Description : Convert each of the following fraction into a percentage: (i) 47 100 (ii) 9 20 (iii) 3 8 (iv) 8 125 (v) 19 500 (vi) 4 15 (vii) 2 3 (viii) 1 3 5 -Maths

Last Answer : We have the following: (i) 47100=47100×100% = 47% (ii) 920=920×100% =9×5%= 45% (iii) 38=38×100% =3×252%=752%=3712% (iv) 8125=8125×100%=8×45%=325%=6.4% (v) ... ;203%=803%=2623% (vii) 23=23×100%=2003%=6623% (viii) 135=85=85×100%=(8×20)%=160%

Convert each of the following into a fraction: (i) 32% (ii) 614% (iii) 2623% (iv) 120% (v) 6.25% (vi) 0.8% (vii) 0.06% (viii) 22.75% -Maths

Description : Convert each of the following into a fraction: (i) 32% (ii) 614% (iii) 2623% (iv) 120% (v) 6.25% (vi) 0.8% (vii) 0.06% (viii) 22.75% -Maths

Last Answer : answer:

Evaluate each of the following: (i) (103)3 (ii) (98)3 (iii) (9.9)3 (iv) (10.4)3 (v) (598)3 (vi) (99)3 -Maths 9th

Description : Evaluate each of the following: (i) (103)3 (ii) (98)3 (iii) (9.9)3 (iv) (10.4)3 (v) (598)3 (vi) (99)3 -Maths 9th

Last Answer : answer:

Cold dil. `H_(2)SO_(4)` will completely dissolve : (i) Pb (ii) `Fe_(3)O_(4)` (iii) Fe (iv) Cu (v) Mg (vi) MgO (vii) `CoCO_(3)` (viii) `CuCO_(2)` (ix)

Description : Cold dil. `H_(2)SO_(4)` will completely dissolve : (i) Pb (ii) `Fe_(3)O_(4)` (iii) Fe (iv) Cu (v) Mg (vi) MgO (vii) `CoCO_(3)` (viii) `CuCO_(2)` (ix)

Last Answer : Cold dil. `H_(2)SO_(4)` will completely dissolve : (i) Pb (ii) `Fe_(3)O_(4)` (iii) Fe (iv) Cu (v) ... ) `CoCO_(3)` (viii) `CuCO_(2)` (ix) `SrCO_(3)`

Cold conc. `HNO_(3)` will completely dissolve: (i) Pb (ii) `Pb_(3)O_(4)` (iii) Fe (iv) Sn (v) Mg (vi) MgO (vii) Hg (viii) Au (ix) Ag (x) Pt

Description : Cold conc. `HNO_(3)` will completely dissolve: (i) Pb (ii) `Pb_(3)O_(4)` (iii) Fe (iv) Sn (v) Mg (vi) MgO (vii) Hg (viii) Au (ix) Ag (x) Pt

Last Answer : Cold conc. `HNO_(3)` will completely dissolve: (i) Pb (ii) `Pb_(3)O_(4)` (iii) Fe (iv) Sn (v) Mg (vi) MgO (vii) Hg (viii) Au (ix) Ag (x) Pt

(i) `NH_(3)` (ii) `N_(2)H_(4)` (iii) `HN_(3)` (iv) `PH_(3)` (v) `H_(2)S` (vi) `AsH_(3)` (vii) `SbH_(3)` (viii) `H_(2)Se` (ix) `H_(2)Te` Number of mole

Description : (i) `NH_(3)` (ii) `N_(2)H_(4)` (iii) `HN_(3)` (iv) `PH_(3)` (v) `H_(2)S` (vi) `AsH_(3)` (vii) `SbH_(3)` (viii) `H_(2)Se` (ix) `H_(2)Te` Number of mole

Last Answer : (i) `NH_(3)` (ii) `N_(2)H_(4)` (iii) `HN_(3)` (iv) `PH_(3)` (v) `H_(2) ... lone pair of electrons on the central atom is present in pure s-orbital

Cold dil. `H_(2)SO_(4)` will completely dissolve : (i) Pb (ii) `Fe_(3)O_(4)` (iii) Fe (iv) Cu (v) Mg (vi) MgO (vii) `CoCO_(3)` (viii) `CuCO_(2)` (ix)

Description : Cold dil. `H_(2)SO_(4)` will completely dissolve : (i) Pb (ii) `Fe_(3)O_(4)` (iii) Fe (iv) Cu (v) Mg (vi) MgO (vii) `CoCO_(3)` (viii) `CuCO_(2)` (ix)

Last Answer : Cold dil. `H_(2)SO_(4)` will completely dissolve : (i) Pb (ii) `Fe_(3)O_(4)` (iii) Fe (iv) Cu (v) ... ) `CoCO_(3)` (viii) `CuCO_(2)` (ix) `SrCO_(3)`

Cold conc. `HNO_(3)` will completely dissolve: (i) Pb (ii) `Pb_(3)O_(4)` (iii) Fe (iv) Sn (v) Mg (vi) MgO (vii) Hg (viii) Au (ix) Ag (x) Pt

Description : Cold conc. `HNO_(3)` will completely dissolve: (i) Pb (ii) `Pb_(3)O_(4)` (iii) Fe (iv) Sn (v) Mg (vi) MgO (vii) Hg (viii) Au (ix) Ag (x) Pt

Last Answer : Cold conc. `HNO_(3)` will completely dissolve: (i) Pb (ii) `Pb_(3)O_(4)` (iii) Fe (iv) Sn (v) Mg (vi) MgO (vii) Hg (viii) Au (ix) Ag (x) Pt

(i) `NH_(3)` (ii) `N_(2)H_(4)` (iii) `HN_(3)` (iv) `PH_(3)` (v) `H_(2)S` (vi) `AsH_(3)` (vii) `SbH_(3)` (viii) `H_(2)Se` (ix) `H_(2)Te` Number of mole

Description : (i) `NH_(3)` (ii) `N_(2)H_(4)` (iii) `HN_(3)` (iv) `PH_(3)` (v) `H_(2)S` (vi) `AsH_(3)` (vii) `SbH_(3)` (viii) `H_(2)Se` (ix) `H_(2)Te` Number of mole

Last Answer : (i) `NH_(3)` (ii) `N_(2)H_(4)` (iii) `HN_(3)` (iv) `PH_(3)` (v) `H_(2) ... lone pair of electrons on the central atom is present in pure s-orbital

How many of following metals impart a characteristic colour to the Bunsen flame ? `(i) Na " " (ii) Li " " (iii) K " " (iv) Ba` `(v) Sr " " (vi) Mg " "

Description : How many of following metals impart a characteristic colour to the Bunsen flame ? `(i) Na " " (ii) Li " " (iii) K " " (iv) Ba` `(v) Sr " " (vi) Mg " "

Last Answer : How many of following metals impart a characteristic colour to the Bunsen flame ? `(i) Na " " (ii) Li " " (iii) K ... ix) `Be " " (x )Ca " " (x i)Cu`

Number of oxide orwesd among , (i) Cassiterite (ii) pyrolusite (iii) Kieserite (iv) Azurite (V) chromite (vi) siderite are.

Description : Number of oxide orwesd among , (i) Cassiterite (ii) pyrolusite (iii) Kieserite (iv) Azurite (V) chromite (vi) siderite are.

Last Answer : Number of oxide orwesd among , (i) Cassiterite (ii) pyrolusite (iii) Kieserite (iv) Azurite (V) chromite (vi) siderite are.

How many of the following are oxides ores (i) Carnalite (ii) Cuprite (iii) Cassiterite (iv) Chromite (v) Cinnabar (vi) Calamine (vii) Cerussite (Viii)

Description : How many of the following are oxides ores (i) Carnalite (ii) Cuprite (iii) Cassiterite (iv) Chromite (v) Cinnabar (vi) Calamine (vii) Cerussite (Viii)

Last Answer : How many of the following are oxides ores (i) Carnalite (ii) Cuprite (iii) Cassiterite (iv) ... (vii) Cerussite (Viii) Chalocopyrite (ix) Chalcocite

Differentiate between any five of the following. (i) Artery and vein (ii) Hard water and soft water (iii) E-mail and Snail mail (iv) Apes and monkey (v) Hydrostatics and hydrodynamics (vi) Comet and meteor (vii) Barrage and dam (viii) Electron and hole (ix) Isobars and isotopes (x) Autopsy and biopsy

Description : Differentiate between any five of the following. (i) Artery and vein (ii) Hard water and soft water (iii) E-mail and Snail mail (iv) Apes and monkey (v) Hydrostatics and hydrodynamics (vi) Comet and ... (vii) Barrage and dam (viii) Electron and hole (ix) Isobars and isotopes (x) Autopsy and biopsy

Last Answer : Answers: (i) Artery and vein: Arteries: Muscular blood vessels that carry blood away from the heart. All arteries, with the exception of the pulmonary and umbilical arteries, carry oxygenated blood ... to determine cause of death Biopsy: Removal and study of a tissue sample for diagnostic purposes

Name the quantities which are measured by the following units. (i) Newton (ii) Joule (iii) Watt (iv) Volt (v) Light year (vi) Angstrom (vii) Acre-foot (viii) Becquerel (ix) Hertz (x) Cusec

Description : Name the quantities which are measured by the following units. (i) Newton (ii) Joule (iii) Watt (iv) Volt (v) Light year (vi) Angstrom (vii) Acre-foot (viii) Becquerel (ix) Hertz (x) Cusec

Last Answer : Answers: (i) Force (ii) Work Energy (iii) Power of electricity (iv) Potential difference (v) Distance of stars and planets (vi) Length (vii) Volume (viii) Radioactivity (ix) Frequency (x) Rate of flow of water

Which quantity do the following units measure: (i) Volt (ii) Coulomb (iii) Walt (iv) Ohm (v) Mho (vi) Ampere (vii) Dyne (viii) Celsius (ix) Joule (x) Calorie

Description : Which quantity do the following units measure: (i) Volt (ii) Coulomb (iii) Walt (iv) Ohm (v) Mho (vi) Ampere (vii) Dyne (viii) Celsius (ix) Joule (x) Calorie

Last Answer : Answers: (i) Voltage (ii) Charge of Electricity (iii) Power (iv) Resistance (v) Conductivity (vi) Current (vii) Force (viii) Temperature (ix) Energy (x) Heat

Arrange the following steps to form a basic Engineering Process Model.i. Test ii. Design iii. Install iv. Specification v. Manufacture vi. Maintain a) 2, 4, 5, 1, 6, 3 b) 4, 2, 5, 1, 3, 6 c) 2, 4, 5, 1, 3, 6 d) 4, 2, 5, 1, 6, 3

Description : Arrange the following steps to form a basic Engineering  Process Model. i. Test ii. Design iii. Install iv. Specification v. Manufacture vi. Maintain a) 2, 4, 5, 1, 6, 3 b) 4, 2, 5, 1, 3, 6 c) 2, 4, 5, 1, 3, 6 d) 4, 2, 5, 1, 6, 3

Last Answer : a) 2, 4, 5, 1, 6, 3

The figure given below depicts a diagrammatic sectional view of the human female reproductive system. Which set of three parts out of I-VI have been correctly identified? I II III V VI IV (a) (II) Endometrium, (III) Infundibulum, (IV) Fimbriae (b) (III) Infundibulum, (IV) Fimbriae, (V) Cervix (c) (IV) Oviducal funnel, (V) Uterus, (VI) Cervix (d) (I) Perimetrium, (II) Myometrium, (III) Fallopian tube

Description : The figure given below depicts a diagrammatic sectional view of the human female reproductive system. Which set of three parts out of I-VI have been correctly identified? I II III V VI IV (a) (II) ... , (V) Uterus, (VI) Cervix (d) (I) Perimetrium, (II) Myometrium, (III) Fallopian tube

Last Answer : (b) (III) Infundibulum, (IV) Fimbriae, (V) Cervix

Identify the components labelled A, B, C and D in the diagram below from the list (i) to (viii) given along withComponents : (i) Cristae of mitochondria (ii) Inner membrane of mitochondria (iii) Cytoplasm (iv) Smooth endoplasmic reticulum (v) Rough endoplasmic reticulum (vi) Mitochondrial matrix (vii) Cell vacuole (viii) Nucleus The correct components are: A B C D (a) (v) (iv) (viii) (iii) (b) (i) (iv) (viii) (vi) (c) (vi) (v) (iv) (vii) (d) (v) (i) (iii) (ii)

Description : Identify the components labelled A, B, C and D in the diagram below from the list (i) to (viii) given along with Components : (i) Cristae of mitochondria (ii) Inner membrane of mitochondria (iii) Cytoplasm (iv) Smooth endoplasmic ... viii) (vi) (c) (vi) (v) (iv) (vii) (d) (v) (i) (iii) (ii)

Last Answer : (a) (v) (iv) (viii) (iii)

Which of the following instruction is of logical instructions? i) CPL A ii) JC rel iii) DA A iv) ANL A, Rn v) RR A vi) CPL bit a) i, v b) v, iii, I c) iv, ii d) v, iii, ii

Description : Which of the following instruction is of logical instructions? i) CPL A ii) JC rel iii) DA A iv) ANL A, Rn v) RR A vi) CPL bit a) i, v b) v, iii, I c) iv, ii d) v, iii, ii

Last Answer : c) iv, i

A company has to choose between two projects whose cash flows are as indicated below; Project 1: i. Investment – Rs. 15 Lakhs ii. Annual cost savings – Rs. 4 lakhs. iii. Bi-annual maintenance cost – Rs. 50,000/- iv. Reconditioning and overhaul during 5th year: 6 lakhs v. Life of the project – 8 years vi. Salvage value – Rs. 5 lakhs Project 2: vii. Investment – Rs. 14 Lakhs viii. Annual cost savings – Rs. 3.5 lakhs. ix. Annual Maintenance cost – Rs. 20,000/- x. Reconditioning and overhaul during 4th year: 5 lakhs xi. Life of the project – 8 years xii. Salvage Value- 2 lakhs Which project should the company choose? The annual discount rate is 12

Description :  A company has to choose between two projects whose cash flows are as indicated  below; Project 1:  i. Investment - Rs. 15 Lakhs ii. Annual cost savings - Rs. 4 lakhs. iii. Bi-annual ... years xii. Salvage Value- 2 lakhs Which project should the company choose? The annual discount rate is 12

Last Answer : Year Project 1 Project 2 Outgo Saving NPV Outgo Saving NPV 0 15.0 0 =-15.0 14.0 0 = -14 1 0 4.0 = (4 / (1+.12)1 = 3.571 0.2 3.5 = (3.3 / (1+.12)1 = 2.95 2 0.5 4.0 = (3.5 / (1+.12)2 = 2.79 0.2 3.5 ... (1+.12)8 = 3.43 0.2 5.5  (3.5+2) = (5.3 / (1+.12)8 = 2.14 NPV = + 2.301 @12% = + 0.15

Draw symbol of (i) Tray Dryer (ii) Plate column (iii) Packed column (iv) Jaw crusher (v) Strirrer (vi) Ball mill.

Description : Draw symbol of (i) Tray Dryer (ii) Plate column (iii) Packed column (iv) Jaw crusher (v) Strirrer (vi) Ball mill.

Last Answer : i)Tray dryer:   ii)Plate column:    iii)Packed column:   iv) Jaw crusher:   v) Stirrer:   vi) Ball mill  

Compare detonation and diesel knock on the basis of (i) Fuel Ignition Temperature (ii) Compression Ratio (iii) Speed (iv) inlet temperature (v) inlet pressure (vi) cylinder wall temperature (vii) cylinder size

Description : Compare detonation and diesel knock on the basis of (i) Fuel Ignition Temperature (ii) Compression Ratio (iii) Speed (iv) inlet temperature (v) inlet pressure (vi) cylinder wall temperature (vii) cylinder size 

Last Answer : Comparison between detonation and diesel knock: Parameter To avoid Detonation in SI Engine  To avoid Diesel knock i) Fuel Ignition Temperature High Low ii) Compression Ratio ... Cylinder wall temperature Low High viii) Cylinder size Small Large