It is better to paint with a brush or roller

What is easier and what makes less smudges? I haven't bought anything yet so I ask. What do you paint at home?
by

1 Answer

Answer :

Out of necessity, I had to start painting, and without cats, I managed it only with a roller. Where I don't get the paint, I wrap it with varnishing cardboard and use a flat brush in hard-to-reach places. I add: I would never make it with a brush, quite easily with a roller. I have 3.2m carpet walls from wall to wall, full of furniture, I can't clear it, I just move the furniture in various ways and I painted a large library ...
by

Related questions

Does the roller use more paint than the brush?

Description : So far I have known so, but a paint shop salesman says just less.

Last Answer : It's not a good idea to use a roller on a smaller surface because it absorbs a lot of paint that doesn't pay off on a small surface. On the other hand, from the point of view of ... loss that cannot be squeezed out of it is negligible. The surface painted with a roller is also more beautiful.   

For sowing of wheat seed, a suitable metering mechanism is: A. Cup feed B. Cell feed C. Fluted roller D. Brush feed

Description : For sowing of wheat seed, a suitable metering mechanism is: A. Cup feed B. Cell feed C. Fluted roller D. Brush feed

Last Answer : Fluted roller

The metering mechanism used in potato planter is: A. Fluted roller B. Brush feed type C. Picker wheel type D. Cell feed type

Description : The metering mechanism used in potato planter is: A. Fluted roller B. Brush feed type C. Picker wheel type D. Cell feed type

Last Answer :  Picker wheel type

When you paint with a roller, do you ”cut in the wall” first then roll, or roll first then ”cut in”?

Description : When you paint with a roller, do you ”cut in the wall” first then roll, or roll first then ”cut in”?

Last Answer : I worked on a campus paint crew for two years in college, way back. I always prefered to do cutting first, then roll. Both on walls and ceilings. Learned from Supervisor it took less paint, not as ... It would take some experience to be on- point and assured, I would guess. Has anyone tried them?

When applying Cut ins can a paint roller be used?

Description : When applying Cut ins can a paint roller be used?

Last Answer : Need answer

How to Paint with a Roller ?

Description : How to Paint with a Roller ?

Last Answer : How to Paint with a Roller Using a paint roller will make your job painting over flat surfaces like walls and ceilings easier. Here's how to get started painting with a roller. Tools Paint ... the roller frame to free it from paint. Keep repeating both actions until you've completely cleaned both.

how do I paint a extremely small corner that I can't get a paint brush in

Description : how do I paint a extremely small corner that I can't get a paint brush in

Last Answer : Need Answer

Which paint brush is best to use for cutting in paint along the wall near the ceiling?

Description : Which paint brush is best to use for cutting in paint along the wall near the ceiling?

Last Answer : The brush should be small and you should tape the ceiling to protect it but otherwise the brush doesn't matter much.

How to Clean a Paint Brush

Description : How to Clean a Paint Brush

Last Answer : How to Clean a Paint Brush Whether you're an avid painter or a do-it-yourself guy who likes to do paint home improvements, it's likely that you've invested in a few paintbrushes. After several ... you'll end up with a misshapen brush. Wash your hands after you've cleaned and washed the paintbrush.

Better to floss before or after you brush?

Description : Better to floss before or after you brush?

Last Answer : I always brush, floss, then mouthwash. Seemed like a logical progression to me to get the major stuff cleaned with a brush, then get in the cracks with the floss, then rinse it all out with the mouthwash.

Which is more fun ice skating or roller skating?

Description : Which is more fun ice skating or roller skating?

Last Answer : I thought that Ice skating was more fun and less painful. If you’re ice skating and you fall, there’s a good chance you’ll slide. If you’re roller skating, you go down and friction holds you in place. I think that ice skating was more forgiving, as well.

Have you experienced roller coaster of emotions?

Description : Have you experienced roller coaster of emotions?

Last Answer : answer:Feel the emotions. Cry when necessary. Talk to a close friend who is willing to listen. That was how I handled it once I got to the point of not being self destructive (not drinking, not getting stoned, not eating a quart of ice cream.)

Do you like roller coasters?

Description : Do you like roller coasters?

Last Answer : Not really, I have had some fun rides over the years but I don;t really care for the whiplash factor and hoping that the crappy little tow cables are strong enough to not fling me off the pinnacle ... a crazed horse, their is still a modicum of control that is missing from being a mere passenger.

Suppose you were the unfortunate woman that plummeted from the top of the roller coaster in Texas. What would be your last thoughts on the way down?

Description : Suppose you were the unfortunate woman that plummeted from the top of the roller coaster in Texas. What would be your last thoughts on the way down?

Last Answer : Out of those I pick d.

Microneedle roller Retailers?

Description : Microneedle roller Retailers?

Last Answer : Seems like you can only order it on the internet at places like Amazon.com.

What should my Roller Derby name be?

Description : What should my Roller Derby name be?

Last Answer : answer:I just did this a hour ago to name a cat. What are two random things you can see right now?

Are you afraid of roller coasters?

Description : Are you afraid of roller coasters?

Last Answer : Love ‘em. Wooden coasters metal rails. To articulation under-hung with loops.

Where are the best places to roller blade outside in Connecticut and Rhode Island?

Description : Where are the best places to roller blade outside in Connecticut and Rhode Island?

Last Answer : answer:Walnut Hill Park in New Britain CT. Bellevue Ave./Ocean Park Dr. Newport RI East Bay Bike Path 14.5 miles starts in Providence ends in Bristol

Did you ever own a skateboard/roller skates & what were some injuries or at least near misses that occured?

Description : Did you ever own a skateboard/roller skates & what were some injuries or at least near misses that occured?

Last Answer : My 10th grade photo clearly shows a black eye I got from rollerskating.I have also punched my friend in the eye by accident on my way down. Skateboarding, I cracked my ass on the cement. The one trick I want to learn is how to defy gravity.I’m almost there.

Has anyone ever used the level editor in Microsoft Train Simulator to build a roller coaster?

Description : Has anyone ever used the level editor in Microsoft Train Simulator to build a roller coaster?

Last Answer : answer:Yes they have… Here are a couple videos of them.. http://www.youtube.com/watch?v=oYuhHl26_PY http://www.youtube.com/watch?v=UALvvfmyFVo Thanks for asking this question… because I really enjoyed watching the videos.

Should I wear glasses or contacts on a roller coaster?

Description : Should I wear glasses or contacts on a roller coaster?

Last Answer : Contacts are fine. If you’re going on a roller coaster that goes upside down, I’d take them off and store them with all the loose shoes that the attendant keeps as well.

In Roller Coaster Tycoon 3, how do I keep the day mode for a custom scenario?

Description : In Roller Coaster Tycoon 3, how do I keep the day mode for a custom scenario?

Last Answer : Just switch it again. It shouldn’t be such a bother. The data that the game uses to save your game apparently does not include the button or switch that changes this option. I used to own this game, but it’s been awhile.

Any ideas on how to modify a "Roller Girl" costume?

Description : Any ideas on how to modify a "Roller Girl" costume?

Last Answer : Put a flower in your hair.

Is derma roller a scam?

Description : Is derma roller a scam?

Last Answer : My bookie says the odds make it a really long shot.

Anyone know anything about derma roller?

Description : Anyone know anything about derma roller?

Last Answer : Link? I got a derma wand and love it when I take the time to use it.

Which pair of roller blades is best?

Description : Which pair of roller blades is best?

Last Answer : Anything made by K2. I have had mine for years and they’re still in great shape (after near endless use, one summer I rollerbladed 75 miles of the bikeways in Vermont with them and have had many similar trips, they’re rugged).

Best roller coaster park / amusement park in the North East?

Description : Best roller coaster park / amusement park in the North East?

Last Answer : North east U.S. I suppose? I dont know I’d this is north enough for you, but Six Flags Great adventure in Northern Jersey is fun, and Hershey park in Pennsylvania is awesome for kids and adults.

What's the best roller coaster you've ever ridden?

Description : What's the best roller coaster you've ever ridden?

Last Answer : The most exciting roller coaster i have been in would be the one in Six Flags. But my personal favorite has to be the Cyclone in Cony Island. It feels like the roller coaster is about to break any ... and I loved going there when we used to live in Williamsburg. Too bad they are closing it down

If you had a stroke more than two years ago, would you ever go on a roller coaster?

Description : If you had a stroke more than two years ago, would you ever go on a roller coaster?

Last Answer : What was the cause of the stroke?

Anyone know about the Derma Roller?

Description : Anyone know about the Derma Roller?

Last Answer : Caveat emptor

At a roller support the line of reaction and the roller base must be at an angle of a.60? b.90? c.not less than 60? d.not more than 60? e.107 dynes

Description : At a roller support the line of reaction and the roller base must be at an angle of a.60? b.90? c.not less than 60? d.not more than 60? e.107 dynes

Last Answer : b. 90?

Which of the following bearing will have least coefficient of friction a.Single ball bearing b.Cylinderical roller bearing c.Self aligury bearing d.Thrust ball bearing e.Tapered bearing

Description : Which of the following bearing will have least coefficient of friction a.Single ball bearing b.Cylinderical roller bearing c.Self aligury bearing d.Thrust ball bearing e.Tapered bearing

Last Answer : e. Tapered bearing

A roller coaster reaches a velocity of 20 m/s at a location where the radius of curvature is 40 m. Calculate the acceleration in m/s2? a.10 b.9 c.11 d.8 e.107 dynes

Description : A roller coaster reaches a velocity of 20 m/s at a location where the radius of curvature is 40 m. Calculate the acceleration in m/s2? a.10 b.9 c.11 d.8 e.107 dynes

Last Answer : a. 10

what do you get when you combine roller skates & a rocking chair. -Riddles

Description : what do you get when you combine roller skates & a rocking chair. -Riddles

Last Answer : rock N roll

The diameter of a roller is 84 cm and its length is 120 cm. It takes 500 complete revolutions to move once over to level a playground. Find the area of the playground in m2. -Maths 9th

Description : The diameter of a roller is 84 cm and its length is 120 cm. It takes 500 complete revolutions to move once over to level a playground. Find the area of the playground in m2. -Maths 9th

Last Answer : The roller is in the form of a cylinder of diameter = 84 cm ⇒ Radius of the roller(r) = 842 cm = 42 cm Length of the roller (h) = 120 cm Curved surface area of the ... roller = 31680 cm2 = 3168010000m2 ∴ Area of the playground levelled in 500 revolutions = 500 x 3168010000m2 = 1584m2

The diameter of a roller is 84 cm and its length is 120 cm. It takes 500 complete revolutions to move once over to level a playground. Find the area of the playground in m2? -Maths 9th

Description : The diameter of a roller is 84 cm and its length is 120 cm. It takes 500 complete revolutions to move once over to level a playground. Find the area of the playground in m2? -Maths 9th

Last Answer : A roller is shaped like a cylinder. Let h be the height of the roller and r be the radius. h = Length of roller = 120 cm Radius of the circular end of roller = r = (84/2) cm = 42 cm Now, CSA of roller = 2πrh = ... , we have 2 (22/7) 0.7 h = 4.4 Or h = 1 Therefore, the height of the cylinder is 1 m.

The diameter of a garden roller is 1.4 m and it is 2 m long. How much area will it level in 5 revolutions? -Maths 9th

Description : The diameter of a garden roller is 1.4 m and it is 2 m long. How much area will it level in 5 revolutions? -Maths 9th

Last Answer : Radius of a garden roller (r) = 1.4 / 2 = 0.7 m and length of the garden roller (h) = 2 m ∴ Curved surface area of garden roller = 2πrh . So, the area levelled of a garden roller in one revolution is 8.8 m2. Now, area levelled of a garden in 5 revolutions = 8.8 x 5= 44m2

The diameter of a roller is 42 cm and its length is 120 cm. -Maths 9th

Description : The diameter of a roller is 42 cm and its length is 120 cm. -Maths 9th

Last Answer : We have the diameter of a cyclindrial roller = 42 cm ⇒ The radius of cyclindrical roller (r) = 42 / 2 = 21 cm Length of a cyclindrical roller (h) = 120 cm Curved surface of the roller = 2πrh = ... of the playground = Area covered by the roller in 500 complete revolutions = 500 1.584 = 792 m2

The diameter of a garden roller is 1.4 m and it is 2 m long. How much area will it level in 5 revolutions? -Maths 9th

Description : The diameter of a garden roller is 1.4 m and it is 2 m long. How much area will it level in 5 revolutions? -Maths 9th

Last Answer : Radius of a garden roller (r) = 1.4 / 2 = 0.7 m and length of the garden roller (h) = 2 m ∴ Curved surface area of garden roller = 2πrh . So, the area levelled of a garden roller in one revolution is 8.8 m2. Now, area levelled of a garden in 5 revolutions = 8.8 x 5= 44m2

The diameter of a roller is 42 cm and its length is 120 cm. -Maths 9th

Description : The diameter of a roller is 42 cm and its length is 120 cm. -Maths 9th

Last Answer : We have the diameter of a cyclindrial roller = 42 cm ⇒ The radius of cyclindrical roller (r) = 42 / 2 = 21 cm Length of a cyclindrical roller (h) = 120 cm Curved surface of the roller = 2πrh = ... of the playground = Area covered by the roller in 500 complete revolutions = 500 1.584 = 792 m2

A cylindrical roller 2.5 m in length, 1.75 m in radius when rolled on a road was found to cover the area of 5500 m2. -Maths 9th

Description : A cylindrical roller 2.5 m in length, 1.75 m in radius when rolled on a road was found to cover the area of 5500 m2. -Maths 9th

Last Answer : NEED ANSWER

A cylindrical roller 2.5 m in length, 1.75 m in radius when rolled on a road was found to cover the area of 5500 m2. -Maths 9th

Description : A cylindrical roller 2.5 m in length, 1.75 m in radius when rolled on a road was found to cover the area of 5500 m2. -Maths 9th

Last Answer : Solution of the question

The diameter of a roller is 84 cm.. -Maths 9th

Description : The diameter of a roller is 84 cm.. -Maths 9th

Last Answer : Radius of roller = 84/2 cm = 42 cm Length of roller = 120 cm ∴ Curved surface area of roller = 2 πrh = 2 x 22/7 x 42 x 120 = 31680 cm2 As the roller takes 500 complete revolutions to level the playground ∴ Area of play ground = 500 x 31680 cm2 = 15840000 cm2 = 15840000/10000 m2 = 1584 m2

……….. is a medium size scanner which has rolling drum to scan your documents. (a) Drum (b) Handheld (c) Flatbed (d) Roller -Technology

Description : ……….. is a medium size scanner which has rolling drum to scan your documents. (a) Drum (b) Handheld (c) Flatbed (d) Roller -Technology

Last Answer : (a) Drumis a medium size scanner which has rolling drum to scan your documents.

Where can I find good quality electric roller shutters western suburbs in Melbourne?

Description : Where can I find good quality electric roller shutters western suburbs in Melbourne?

Last Answer : Europe Shutter Blinds offers the Motorised Roller Shutters in western, eastern & northern suburbs Melbourne. Our motorised electric rolling shutters are insulated and soundproof. Call us at 1300 734 167 for a free consultation today.

Where can I find modern roller shutters in Melbourne?

Description : Where can I find modern roller shutters in Melbourne?

Last Answer : Europe Shutter Blinds is one of the leading modern roller shutters company in Melbourne, providing specialist roller shutters for both domestic & commercial in Melbourne. Call us now at 03 9357 8903

How can I improve my related rates investigation about roller skates down a hill?

Description : How can I improve my related rates investigation about roller skates down a hill?

Last Answer : I am taking MAA HL syllabus and I'm trying to do a calculus IA on the roller skates and my draft is due in a few days. I am modelling rates of change of roller skate accelerating down a hill, ... that this may too simple of an investigation for a HL syllabus. If anyone can suggest any way to sal

Where can I buy Electric Roller Shutters in Melbourne?

Description : Where can I buy Electric Roller Shutters in Melbourne?

Last Answer : Europe Shutter Blinds offers the Motorised Roller Shutters in western, eastern & northern suburbs Melbourne. Our motorised electric rolling shutters are insulated and soundproof. Call us at 1300 734 167 for a free consultation today.

Where can I find some nature jade roller supplier & manufacturer?

Description : Where can I find some nature jade roller supplier & manufacturer?

Last Answer : Yes, i can. We have produced jade gua sha boards over 20 years old and you rest assure that we can offer many different styles of gua sha board you like and large volume of gua sha board you ... so you can believe us. Welcome to contact and select from us anytime. You can search for the Deyigems

What is a tie roller ? What is the function of tie roller ?

Description : What is a tie roller ? What is the function of tie roller ?

Last Answer : Tie roller is an engineering tool. In civil engineering, GI wire is used to fasten one rod to another. To keep these two or more rods fastened together, the GI has to be gitted or fastened by the GI wire , a tie roller is used to give this strong git. Many also use its versatility.