Which of the following instruments can be used to measure AC current only?

Which of the following instruments can be used to measure AC current only?

(a) Permanent Magnet Type ammeter(b) Induction type ammeter (c) Moving iron voltmeter(d) Moving iron ammeter
by

1 Answer

Answer :

(b) Induction type ammeter
by

Related questions

_____ instruments are those which measure the total quantity of electricity delivered in a particular time.

Last Answer : Integrating instruments are those which measure the total quantity of electricity delivered in a particular time.

Which instruments are those which measure the total quantity of electricity delivered in a particular time?

Last Answer : Integrating instruments are those which measure the total quantity of electricity delivered in a particular time.

An unshielded moving iron voltmeter is used to measure the voltage in an AC circuit. The stray DC magnetic

Description : An unshielded moving iron voltmeter is used to measure the voltage in an AC circuit. The stray DC magnetic field having a component along the axis will be  (1) unaffected (2) decreased (3) increased (4) either decreased or increased depending on the direction of the DC field

Last Answer : An unshielded moving iron voltmeter is used to measure the voltage in an AC circuit. The stray DC magnetic field having a component along the axis will be either decreased or increased depending on the direction of the DC field

can ammeter measure ac?

Last Answer : Yes it can...

Eddy current damping is normally used in the instruments of

Description : Eddy current damping is normally used in the instruments of (a) Induction type (b) Moving iron type (c) Permanent magnet moving coil type (d) Nothing can be said 

Last Answer : Permanent  magnetic  moving  coil  instrument.

Instruments of Measure The device used ' for the measurement of current, voltage and resistance is: A. AVO meter B. Galvanometer C. Ammeter D. Ohm meter

Description : Instruments of Measure The device used ' for the measurement of current, voltage and resistance is: A. AVO meter B. Galvanometer C. Ammeter D. Ohm meter

Last Answer : ANSWER: A

Which of the following instruments can be used for measurement of very high value resistances such as

Description : Which of the following instruments can be used for measurement of very high value resistances such as insulation resistance in industries? A) Wheatstone bridge B) Megger C) Ohm-meter D) Resistive potentiometer 

Last Answer : Which of the following instruments can be used for measurement of very high value resistances such as insulation resistance in industries? A) Wheatstone bridge B) Megger C) Ohm-meter D) Resistive potentiometer 

Highest flux density exists inside which of the following instruments?

Description :  Highest flux density exists inside which of the following instruments? A) Electrodynamic instruments B) Hot wire instruments C) Moving iron instruments D) Moving coil instruments

Last Answer : Highest flux density exists inside which of the following instruments? A) Electrodynamic instruments B) Hot wire instruments C) Moving iron instruments D) Moving coil instruments 

The type of instruments used mainly for standardizing instruments in laboratories is

Description : The type of instruments used mainly for standardizing instruments in laboratories is (a) Indicating instrument (b) Integrating instrument (c) Absolute instrument (d) Recording instrument  

Last Answer : Ans:Option C

Electrostatic type instruments are primarily used as

Description : Electrostatic type instruments are primarily used as 

Last Answer : Voltmeter

The force required to move the pointer in an indicating instruments is

Description : The force required to move the pointer in an indicating instruments is

Last Answer : The force required to move the pointer in an indicating instruments is deflecting force

Horizontally mounted moving iron instruments use

Description : Horizontally mounted moving iron instruments use   (a) Eddy current damping (b) Electromagnetic damping (c) Fluid friction damping (d) Air friction damping

Last Answer : Horizontally mounted moving iron instruments use Air friction damping

Permanent magnet moving coil instruments are used for

Description : Permanent magnet moving coil instruments are used for

Last Answer : PMME are mostly used for measuring voltage and current.

Thermocouple instruments are also known as

Last Answer : Thermocouple instruments are also known as Rectifier instruments.

PMMC type instruments normally use

Last Answer : PMMC type instruments normally use Eddy current damping.

Electrostatic instruments are normally used for

Last Answer :  Electrostatic instruments are normally used for High voltage measurements.

Jewels are used in instruments for the purpose of

Last Answer : Jewels are used in instruments for the purpose of Bearing.

The thermocouple instruments do not have

Last Answer : The thermocouple instruments do not have High degree of measuring accuracy.

In the case of PMMC rectifier type instruments, the deflecting torque is proportional to

Last Answer : In the case of PMMC rectifier type instruments, the deflecting torque is proportional to Average value of AC current.

The electrostatic instruments can be used without serious loss of accuracy upto ......... frequency

Last Answer : The electrostatic instruments can be used without serious loss of accuracy upto 100kHz frequency.

The use of _____ instruments is merely confined within laboratories as standardising instruments.

Description : The use of _____ instruments is merely confined within laboratories as standardising instruments.

Last Answer : The use of absolute instruments is merely confined within laboratories as standardizing instruments.

Air friction damping is used in the instruments which is:

Last Answer : Air friction damping is used in the instruments which is: Moving iron

Moving iron and PMMC instruments can be distinguished from each other by looking at:

Last Answer : Moving iron and PMMC instruments can be distinguished from each other by looking at: Scale

Commonly used instruments in power system measurement are?

Last Answer : Commonly used instruments in power system measurement are induction.

Operating torques in analogue instruments are?

Last Answer : Operating torques in analogue instruments are deflecting, control and damping.

The power factor of a single phase load can be calculated if the instruments available are?

Last Answer : The power factor of a single phase load can be calculated if the instruments available are three ammeters or three voltmeters.

The switch board instruments?

Last Answer : The switch board instruments should be mounted in vertical position.

In majority of instruments damping is provided by?

Last Answer : In the majority of instruments, damping is provided by eddy currents.

According to application, instruments are classified as?

Last Answer : According to application, instruments are classified as switch board, portable.

The use of which instruments is merely confined within laboratories as standardizing instruments?

Last Answer : The use of absolute instruments is merely confined within laboratories as standardizing instruments.

What do you mean by secondary instruments?

Description : What do you mean by secondary instruments?

Last Answer : The instruments which will give the direct readings are called secondary instruments

What type of meter is used to measure current?

Description : What type of meter is used to measure current?

Last Answer : Ammeter

An internal resistance is placed in series with the meter movement of which of the following instruments? A. AC ammeter B. DC ammeter C. DC voltmeter D. Frequency meter

Description : An internal resistance is placed in series with the meter movement of which of the following instruments? A. AC ammeter B. DC ammeter C. DC voltmeter D. Frequency meter

Last Answer : Answer: C

When reading AC current with the multimeter shown in the illustration and you are unsure of the range, the range switch should be set to ___________. EL-0047 A. 10 MA/ 10 AMP with leads in the (-10 A) and (+10 A) jacks B. 10 MA/ 10 AMP with leads in the (-COMMON) and (+) jacks C. 10 MA/ 10 AMP with leads in the (-COMMON) and (+10 A) jacks D. unable to measure AC current with this multimeter

Description : When reading AC current with the multimeter shown in the illustration and you are unsure of the range, the range switch should be set to ___________. EL-0047 A. 10 MA/ 10 AMP with leads in the (-10 A ... leads in the (-COMMON) and (+10 A) jacks D. unable to measure AC current with this multimeter

Last Answer : Answer: D

If reading AC current with the illustrated device and unsure of the range as a precaution , the first step should be to _________. EL-0047 A. secure power and test for voltage B. disconnect the lead to be tested and connect the meter in series C. connect the meter to measure resistance and use Ohm's law to calculate current D. unable to safely measure current with the device

Description : If reading AC current with the illustrated device and unsure of the range as a precaution , the first step should be to _________. EL-0047 A. secure power and test for voltage B. disconnect the ... resistance and use Ohm's law to calculate current D. unable to safely measure current with the device

Last Answer : Answer: A

When attempting to measure AC current with the device shown and you are unsure of the range, the range switch should be set to __________. EL-0047 A. 10 MA / AMPS with leads in the (-10 A) and (+10 A) jacks B. 10 MA / AMPS with leads in the (-COMMON) and (+) jacks C. 10 MA / AMPS with leads in the (-COMMON) and (+10 A) jacks D. unable to accurately measure AC current with this device as illustrated

Description : When attempting to measure AC current with the device shown and you are unsure of the range, the range switch should be set to __________. EL-0047 A. 10 MA / AMPS with leads in the (-10 A) and ... (-COMMON) and (+10 A) jacks D. unable to accurately measure AC current with this device as illustrated

Last Answer : Answer: D

Two stator windings of AC servomotors are oriented:

Description : Two stator windings of AC servomotors are oriented: A) 90 degree (mechanical) apart B) 90 degree (electrical) apart C) 180 degree (mechanical) apart D) 180 degree (electrical) apart

Last Answer : Two stator windings of AC servomotors are oriented: 90 degree (electrical) apart 

In a standard multimeter for measuring AC voltage, parameter of _____ voltage is measured

Description : In a standard multimeter for measuring AC voltage, parameter of _____ voltage is measured

Last Answer : In a standard multimeter for measuring AC voltage, parameter of RMS voltage is measured

In an ac tachometer, the two stator field coils are mounted

Description : In an ac tachometer, the two stator field coils are mounted

Last Answer : In an ac tachometer, the two stator field coils are mounted in space quadrate

An ac voltmeter using full -wave rectification and having a sinusoidal input has an ac sensitivity equal to

Description : An ac voltmeter using full -wave rectification and having a sinusoidal input has an ac sensitivity equal to  (1) 1.414 times dc sensitivity (2) dc sensitivity (3) 0.9 times dc sensitivity (4) 0.707 times dc sensitivity

Last Answer : An ac voltmeter using full -wave rectification and having a sinusoidal input has an ac sensitivity equal to 0.9 times dc sensitivity

For measurement of radio frequency ac signals __________ type meter is used

Description : For measurement of radio frequency ac signals __________ type meter is used

Last Answer : For measurement of radio frequency ac signals thermo-couple type meter is used

The most commonly used null deflector in a power frequency ac bridge is a:

Last Answer : The most commonly used null deflector in a power frequency ac bridge is a: Vibration galvanometer.

In an AC. co-ordinate potentiometer, the currents in the phase and quadrature potentiometer are adjusted to be?

Last Answer : In an AC. co-ordinate potentiometer, the currents in the phase and quadrature potentiometer are adjusted to be out of phase by 90°.

Instruments used to measure air pressure are called?

Description : Instruments used to measure air pressure are called?

Last Answer : Barometer

Which of the following instruments is used to measure humidity? (1) Kata Thermometer (2) Anemometer (3) Sling Psychrometer (4) Clinical Thermometer

Description : Which of the following instruments is used to measure humidity? (1) Kata Thermometer (2) Anemometer (3) Sling Psychrometer (4) Clinical Thermometer

Last Answer : (3) Sling Psychrometer Explanation: A psychrometer consists of two thermometers, one which is dry and one which is kept moist with distilled water on a sock or wick. The two thermometers are ... is sometimes used for field measurements, but is being replaced by more convenient electronic sensors.

Which of the following instruments measure the amplitude of a vibrating body? (A) Vibrometers (B) Seismometer (C) Both (a) and (b) (D) None of these

Description : Which of the following instruments measure the amplitude of a vibrating body? (A) Vibrometers (B) Seismometer (C) Both (a) and (b) (D) None of these

Last Answer : (C) Both (a) and (b)

The instruments which are used to measure the ___________ of a vibrating body are called vibration measuring instrument. (A) displacement (B) velocity (C) acceleration (D) all of the above

Description : The instruments which are used to measure the ___________ of a vibrating body are called vibration measuring instrument. (A) displacement (B) velocity (C) acceleration (D) all of the above

Last Answer : (D) all of the above

Which of the following instruments measure the amplitude of a vibrating body? (A) Vibrometers (B) Seismometer (C) Both (a) and (b) (D) None of these

Description : Which of the following instruments measure the amplitude of a vibrating body? (A) Vibrometers (B) Seismometer (C) Both (a) and (b) (D) None of these

Last Answer : (C) Both (a) and (b)

Which of the following instruments is used to measure flow on the application of Bernoulli's theorem? (A) Venturimeter (B) Orifice plate (C) Nozzle (D) All of the above

Description : Which of the following instruments is used to measure flow on the application of Bernoulli's theorem? (A) Venturimeter (B) Orifice plate (C) Nozzle (D) All of the above

Last Answer : Answer: Option D

The research instruments that a marketing researcher can make use of area. A. Questionnaires, Qualitative measure and mechanical devices B. Questionnaires, experimental research and behavioral data C. Questionnaires, qualitative measure and experimental research D. Qualitative measure, Experimental research and survey research E. Experimental research, behavioral data and mechanical devices.

Description : The research instruments that a marketing researcher can make use of area. A. Questionnaires, Qualitative measure and mechanical devices B. Questionnaires, experimental research and behavioral data ... research and survey research E. Experimental research, behavioral data and mechanical devices.

Last Answer : A. Questionnaires, Qualitative measure and mechanical devices