The repeat accuracy of an instrument can be judged from its

by

1 Answer

Answer :

The repeat accuracy of an instrument can be judged from its standard deviation of error.

by

Related questions

In the case of an instrument reading of 8.3 V with a 0 to 150 voltmeter having a guaranteed accuracy of

Description :  In the case of an instrument reading of 8.3 V with a 0 to 150 voltmeter having a guaranteed accuracy of 1% full scale reading, the percentage limiting error is   (A) 1.810% (B) 0.181% (C)12.45% (D) 0.0018%

Last Answer :  In the case of an instrument reading of 8.3 V with a 0 to 150 voltmeter having a guaranteed accuracy of 1% full scale reading, the percentage limiting error is 12.45%

A 0-10 A ammeter has a guaranteed accuracy of 1% of full scale deflection, the limiting error while reading

Description : A 0-10 A ammeter has a guaranteed accuracy of 1% of full scale deflection, the limiting error while reading 2.5 A will be (a) 1% (b) 2% (c) 4% (d) None of these 

Last Answer : A

The electrostatic instruments can be used without serious loss of accuracy upto ......... frequency

Last Answer : The electrostatic instruments can be used without serious loss of accuracy upto 100kHz frequency.

For high accuracy the meter has

Last Answer : For high accuracy the meter has Hand drawn scale.

A 0 to 300V voltmeter has a guaranteed accuracy of 1% of full scale...

Description : A 0 to 300V voltmeter has a guaranteed accuracy of 1% of full scale reading. The voltage measured by the instrument is 83V. The percentage limiting error is

Last Answer : A 0 to 300V voltmeter has a guaranteed accuracy of 1% of full scale reading. The voltage measured by the instrument is 83V. The percentage limiting error is 4.85%.

A 150 V moving iron voltmeter of accuracy class 1.0 reads 75 V when ...

Description : A 150 V moving iron voltmeter of accuracy class 1.0 reads 75 V when used in a circuit under a standard conditions. The maximum possible percentage error in the reading is:

Last Answer : A 150 V moving iron voltmeter of accuracy class 1.0 reads 75 V when used in a circuit under a standard conditions. The maximum possible percentage error in the reading is:  2.0.

In order to achieve high accuracy, the slide wire of a potentiometer should be?

Last Answer : In order to achieve high accuracy, the slide wire of a potentiometer should be as long as possible.

Compare analog instrument to digital instrument on the basis of accuracy, resolution, power required and portability.

Description : Compare analog instrument to digital instrument on the basis of accuracy, resolution, power required and portability. 

Last Answer : Comparison between Analog instruments & Digital instruments: 

The instrument having its deflection depends upon average value is:

Last Answer : The instrument having its deflection depends upon average value is:  Rectifier type

The effect of stray magnetic fields on the actuating torque of a portable instrument is maximum when the

Description : The effect of stray magnetic fields on the actuating torque of a portable instrument is maximum when the operating field of the instrument and the stray fields are  A) Perpendicular B) Parallel C) Inclined at 60" D) Inclined at 30°

Last Answer : The effect of stray magnetic fields on the actuating torque of a portable instrument is maximum when the operating field of the instrument and the stray fields are Parallel 

A moving coil instrument has a resistance of 10 W and gives full scale deflection when carrying

Description : A moving coil instrument has a resistance of 10 W and gives full scale deflection when carrying a current of 50 mA. To measure current upto 100 A, we will have to connect • 10 W resistance in series • 10 W resistance in parallel • 10/1999 W resistance in series • 10/1999 W resistance in parallel

Last Answer : A moving coil instrument has a resistance of 10 W and gives full scale deflection when carrying a current of 50 mA. To measure current upto 100 A, we will have to connect 10/1999 W resistance in parallel

A Pyrheliometer is an instrument to measure :

Description : A Pyrheliometer is an instrument to measure :  (A) temperature of solar photovoltaic cell  (B) intensity of direct solar radiation at normal incidence  (C) intensity of indirect solar radiation  (D) efficiency of a solar photovoltaic cell

Last Answer : A Pyrheliometer is an instrument to measure : intensity of direct solar radiation at normal incidence 

In a PMMC instrument, the damping provided is :

Description : In a PMMC instrument, the damping provided is :  (A) air damping (C) eddy current damping (B) fluid damping (D) magnetic damping using a magnet

Last Answer : In a PMMC instrument, the damping provided is : eddy current damping 

A PMMC instrument has FSD of 100 μA and a coil resistance of 1 kΩ. To convert the instrument into an

Description : A PMMC instrument has FSD of 100 μA and a coil resistance of 1 kΩ. To convert the instrument into an ammeter with full scale deflection of 100 mA, the required shunt resistance is (A) 1 Ω (B) 1.001 Ω (C) 0.5 Ω (D) 10 Ω

Last Answer : A PMMC instrument has FSD of 100 μA and a coil resistance of 1 kΩ. To convert the instrument into an ammeter with full scale deflection of 100 mA, the required shunt resistance is 1.001 Ω

Eddy current damping cannot be used for moving iron instrument because

Description : Eddy current damping cannot be used for moving iron instrument because

Last Answer : Eddy current damping cannot be used for moving iron instrument because the presence of a permanent magnet required for such purpose would affect the deflection and hence the reading of the instrument

Identify the instrument that does not exist (A) Dynamo-meter type ammeter (B) Dynamo-meter type

Description : Identify the instrument that does not exist (A) Dynamo-meter type ammeter (B) Dynamo-meter type wattmeter (C) Moving-iron voltmeter (D) Moving-iron wattmeter

Last Answer : Identify the instrument that does not exist (A) Dynamo-meter type ammeter (B) Dynamo-meter type wattmeter (C) Moving-iron voltmeter (D) Moving-iron wattmeter

Electrostatic instrument uses the principle of the variation of

Last Answer : Electrostatic instrument uses the principle of the variation of Capacitance with the voltage.

In a gravity controlled instrument, the deflection angle is proportional to

Last Answer :  In a gravity controlled instrument, the deflection angle is proportional to sine inverse of measurand.

In a moving coil instrument, the deflecting torque is proportional to

Last Answer :  In a moving coil instrument, the deflecting torque is proportional to Current.

If the instrument is to have a wide range, the instrument should have

Last Answer : If the instrument is to have a wide range, the instrument should have Logarithmic scale.

The error of an instrument is normally given as a percentage of

Last Answer : The error of an instrument is normally given as a percentage of full-scale value.

An instrument to be used for measurement and control should preferably have

Last Answer : An instrument to be used for measurement and control should preferably have Linear output and fast response

For the indicating instrument the preferred damping condition is

Last Answer : For the indicating instrument the preferred damping condition is  a damping coefficient of 0.8 to 1.

A moving coil instrument is used as an ohmmeter. The indicating scale of the meter will be

Last Answer : A moving coil instrument is used as an ohmmeter. The indicating scale of the meter will be Hyperbolic.

The sensitivity of an instrument is

Last Answer : The sensitivity of an instrument is ratio of the change in the magnitude of the output to the corresponding change in the magnitude of the input.

The percentage limiting error, in the case of an instrument reading ...

Description :  The percentage limiting error, in the case of an instrument reading of 8.3V with a 0 to 150V voltmeter having a guaranteed accuracy of 1% full-scale reading is

Last Answer :  The percentage limiting error, in the case of an instrument reading of 8.3V with a 0 to 150V voltmeter having a guaranteed accuracy of 1% full-scale reading is 18.10%.

An instrument transformer is used to extend the range of

Last Answer : An instrument transformer is used to extend the range of induction instrument.

Megger is an instrument used for the measurement of:

Last Answer : Megger is an instrument used for the measurement of: High resistance and insulation resistance

An instrument that is capable of measuring only dc is:

Last Answer : An instrument that is capable of measuring only dc is: Moving coil

PMMC instrument gives uniform scale because:

Description : PMMC instrument gives uniform scale because:

Last Answer : PMMC instrument gives uniform scale because: It uses spring control and The deflection torque is proportional to the instrument current.

The damping torque must operate only when the moving system of the indicating instrument is:

Last Answer : The damping torque must operate only when the moving system of the indicating instrument is: Actually moving

The reliability of the instrument refer to:

Last Answer : The reliability of the instrument refer to: Degree to which repeatability continues to remain within specified limits

The deflection of hot-wire instrument depends on:

Last Answer : The deflection of hot-wire instrument depends on: RMS value of the alternating current

In a dynamo-meter type of moving coil instrument a swamping resistance is provided in order to:

Last Answer : In a dynamo-meter type of moving coil instrument a swamping resistance is provided inorder to: Provide equal time constant for moving coil and fixed coil, when used for ac measurement

A PMMC instrument can be used as a fluxmeter by:

Last Answer : A PMMC instrument can be used as a fluxmeter by: Removing the control spring

Hysteresis of an instrument means:

Last Answer : Hysteresis of an instrument means: The change in the same reading when input is first increased and then decreased.

Instrument transformers are?

Last Answer : Instrument transformers are potential transformers, current transformers.

The rectifier instrument is not free from?

Last Answer : The rectifier instrument is not free from frequency error.

A multirange instrument has?

Last Answer : A multirange instrument has multiple shunt or series resistances inside the meter.

The gravity controlled instrument has crowded scale because current is proportional to?

Last Answer : The gravity controlled instrument has crowded scale because current is proportional to sine of deflection angle.

If an instrument has cramped scale for larger values, then it follows?

Last Answer : If an instrument has cramped scale for larger values, then it follows logarithmic law.

The ratio of maximum displacement deviation to full scale deviation of the instrument is called?

Description : The ratio of maximum displacement deviation to full scale deviation of the instrument is called?

Last Answer : The ratio of maximum displacement deviation to full scale deviation of the instrument is called linearity.

The scale of a rectifier instrument is?

Last Answer : The scale of a rectifier instrument is linear.

A moving iron instrument can be used for?

Last Answer : A moving iron instrument can be used for both D.C. and A.C.

The disc of an instrument using eddy current damping should be of?

Last Answer : The disc of an instrument using eddy current damping should be of conducting and non-magnetic material.

In a portable instrument, the controlling torque is provided by?

Last Answer : In a portable instrument, the controlling torque is provided by spring.

The pointer of an indicating instrument should be?

Last Answer : The pointer of an indicating instrument should be very light.

Which is an instrument which measures insulation resistance of an electric circuit relative to earth and one another?

Last Answer : Meggar is an instrument which measures the insulation resistance of an electric circuit relative to earth and one another.

A moving-coil permanent-magnet instrument can be used as flux-meter?

Last Answer : A moving-coil permanent-magnet instrument can be used as flux-meter by eliminating the control springs.

A moving-coil permanent-magnet instrument can be used as what by using a low resistance shunt?

Last Answer : A moving-coil permanent-magnet instrument can be used as ammeter by using a low resistance shunt.