In a moving coil instrument, the deflecting torque is proportional to

by

1 Answer

Answer :

 In a moving coil instrument, the deflecting torque is proportional to Current.

by

Related questions

In a moving iron meter, the deflecting torque is proportional to

Last Answer : In a moving iron meter, the deflecting torque is proportional to Square of the current through the coil.

In a ballistic galvanometer, the deflecting torque is proportional to

Last Answer :  In a ballistic galvanometer, the deflecting torque is proportional to the current through coil.

In the case of PMMC rectifier type instruments, the deflecting torque is proportional to

Last Answer : In the case of PMMC rectifier type instruments, the deflecting torque is proportional to Average value of AC current.

When both deflecting and controlling torque act, the pointer of an indicating instrument comes to

Description : When both deflecting and controlling torque act, the pointer of an indicating instrument comes to

Last Answer : rest

If the pointer of an indicating instrument is in motion, then what opposes deflecting torque?

Description : If the pointer of an indicating instrument is in motion, then what opposes deflecting torque?

Last Answer : damping and controlling torque

The damping torque must operate only when the moving system of the indicating instrument is:

Last Answer : The damping torque must operate only when the moving system of the indicating instrument is: Actually moving

A moving coil instrument has a resistance of 10 W and gives full scale deflection when carrying

Description : A moving coil instrument has a resistance of 10 W and gives full scale deflection when carrying a current of 50 mA. To measure current upto 100 A, we will have to connect • 10 W resistance in series • 10 W resistance in parallel • 10/1999 W resistance in series • 10/1999 W resistance in parallel

Last Answer : A moving coil instrument has a resistance of 10 W and gives full scale deflection when carrying a current of 50 mA. To measure current upto 100 A, we will have to connect 10/1999 W resistance in parallel

A moving coil instrument is used as an ohmmeter. The indicating scale of the meter will be

Last Answer : A moving coil instrument is used as an ohmmeter. The indicating scale of the meter will be Hyperbolic.

In a dynamo-meter type of moving coil instrument a swamping resistance is provided in order to:

Last Answer : In a dynamo-meter type of moving coil instrument a swamping resistance is provided inorder to: Provide equal time constant for moving coil and fixed coil, when used for ac measurement

A moving-coil permanent-magnet instrument can be used as flux-meter?

Last Answer : A moving-coil permanent-magnet instrument can be used as flux-meter by eliminating the control springs.

A moving-coil permanent-magnet instrument can be used as what by using a low resistance shunt?

Last Answer : A moving-coil permanent-magnet instrument can be used as ammeter by using a low resistance shunt.

The torque produced in wattmeter is proportional to

Description : The torque produced in wattmeter is proportional to

Last Answer : A

The effect of stray magnetic fields on the actuating torque of a portable instrument is maximum when the

Description : The effect of stray magnetic fields on the actuating torque of a portable instrument is maximum when the operating field of the instrument and the stray fields are  A) Perpendicular B) Parallel C) Inclined at 60" D) Inclined at 30°

Last Answer : The effect of stray magnetic fields on the actuating torque of a portable instrument is maximum when the operating field of the instrument and the stray fields are Parallel 

In a portable instrument, the controlling torque is provided by?

Last Answer : In a portable instrument, the controlling torque is provided by spring.

In a gravity controlled instrument, the deflection angle is proportional to

Last Answer :  In a gravity controlled instrument, the deflection angle is proportional to sine inverse of measurand.

The gravity controlled instrument has crowded scale because current is proportional to?

Last Answer : The gravity controlled instrument has crowded scale because current is proportional to sine of deflection angle.

A PMMC instrument has FSD of 100 μA and a coil resistance of 1 kΩ. To convert the instrument into an

Description : A PMMC instrument has FSD of 100 μA and a coil resistance of 1 kΩ. To convert the instrument into an ammeter with full scale deflection of 100 mA, the required shunt resistance is (A) 1 Ω (B) 1.001 Ω (C) 0.5 Ω (D) 10 Ω

Last Answer : A PMMC instrument has FSD of 100 μA and a coil resistance of 1 kΩ. To convert the instrument into an ammeter with full scale deflection of 100 mA, the required shunt resistance is 1.001 Ω

A permanent magnet moving coil ammeter has a coil resistance of 99 ohm and Full Scale Deflection (FSD)

Description : A permanent magnet moving coil ammeter has a coil resistance of 99 ohm and Full Scale Deflection (FSD) current of 0.1mA. Shunt resistance is 1 ohm. Current through the meter at 0.5 F.S.D is:

Last Answer : A permanent magnet moving coil ammeter has a coil resistance of 99 ohm and Full Scale Deflection (FSD) current of 0.1mA. Shunt resistance is 1 ohm. Current through the meter at 0.5 F.S.D is: 0.05mA

Permanent magnet moving coil instruments are used for

Description : Permanent magnet moving coil instruments are used for

Last Answer : PMME are mostly used for measuring voltage and current.

A moving coil of meter has 100 turns, and a length and depth of 10mm and 20mm respectively. It is positioned

Description : A moving coil of meter has 100 turns, and a length and depth of 10mm and 20mm respectively. It is positioned in a uniform radial flux density of 200 mT. The coil carrier current capacity is 50 mA. The torque on the coil is

Last Answer : A moving coil of meter has 100 turns, and a length and depth of 10mm and 20mm respectively. It is positioned in a uniform radial flux density of 200 mT. The coil carrier current capacity is 50 mA. The torque on the coil is 200µNm

In moving coil meters, damping is provided by

Last Answer : In moving coil meters, damping is provided by eddy current disk.

In Weston synchronoscope the moving coil is connected across?

Last Answer : In Weston synchronoscope the moving coil is connected across bus-bars.

The resistance in the circuit of the moving coil of a dynamometer wattmeter should be?

Last Answer : The resistance in the circuit of the moving coil of a dynamometer wattmeter should be high.

As the deflection of the moving system increases, the controlling torque in an indicating instrument.

Description : As the deflection of the moving system increases, the controlling torque in an indicating instrument.

Last Answer : increases

Eddy current damping cannot be used for moving iron instrument because

Description : Eddy current damping cannot be used for moving iron instrument because

Last Answer : Eddy current damping cannot be used for moving iron instrument because the presence of a permanent magnet required for such purpose would affect the deflection and hence the reading of the instrument

A moving iron instrument can be used for?

Last Answer : A moving iron instrument can be used for both D.C. and A.C.

Explain the construction and working of moving coil instrument.

Description : Explain the construction and working of moving coil instrument.

Last Answer : Construction: The moving part is a coil wound on a light aluminium frame, mounted on a shaft made of stainless steel which is pivoted at either ends on jewel bearing made of sapphire. The coil is placed between ... . Where B is magnetic flux, N is number of turns and L is length of coil. 

Current range extension in moving coil instruments can be achieved by placing a ___ in shunt with the instrument.

Description : Current range extension in moving coil instruments can be achieved by placing a ___ in shunt with the instrument.

Last Answer : low resistance resistor

Permanent-magnet moving coil instrument can be used in

Description : Permanent-magnet moving coil instrument can be used in

Last Answer : dc work only

What is the reason why the scale of a permanent-magnet moving coil instrument is uniform?

Description : What is the reason why the scale of a permanent-magnet moving coil instrument is uniform?

Last Answer : because it is spring controlled

What is the typical full-scale deflection current of a moving coil instrument?

Description : What is the typical full-scale deflection current of a moving coil instrument?

Last Answer : 50mA

Permanent Magnet Moving Coil (PMMC) Instrument

Description : Permanent Magnet Moving Coil (PMMC) Instrument

Last Answer : Permanent Magnet Moving Coil (PMMC) Instrument

A permanent magnet moving coil instrument gives full scale deflection of 25mA when a voltage of 75mV is applied across it. Calculate: (i) Resistance of shunt required for full scale deflection of 150 A. (ii) Series resistance for full scale deflection of 500 V.

Description : A permanent magnet moving coil instrument gives full scale deflection of 25mA when a voltage of 75mV is applied across it. Calculate: (i) Resistance of shunt required for full scale deflection of 150 A. (ii) Series resistance for full scale deflection of 500 V.

Last Answer : Answer :

Name the material used for :- (i) Moving coil (ii) Permanent magnet in PMMC instrument.

Description : Name the material used for :- (i) Moving coil (ii) Permanent magnet in PMMC instrument.

Last Answer : (i) Material used for Moving coil: Copper, Aluminum( some times)  (ii) Permanent magnets are made of special alloys such as :  Aluminum-Nickel-Cobalt (Alnicos)  Strontium-Iron  Neodymium-Iron-Boron  Samarium-Cobalt.

A moving coil instrument of resistance 5 Ohm requires a potential difference of 75 mV to give a full scale...

Description : A moving coil instrument of resistance 5 Ohm requires a potential difference of 75 mV to give a full scale deflection. The value of shunt resistance needed to give a full scale deflection at 30 A is

Last Answer : A moving coil instrument of resistance 5 Ohm requires a potential difference of 75 mV to give a full scale deflection. The value of shunt resistance needed to give a full scale deflection at 30 A is 2.5 milliOhm

In laser printers, printing is achieved by deflecting laser beam on to __________ surface of a drum. A. Magnetic B. Electric C. Photosensitive D. None of the Above

Description : In laser printers, printing is achieved by deflecting laser beam on to __________ surface of a drum. A. Magnetic B. Electric C. Photosensitive D. None of the Above

Last Answer : C. Photosensitive

Minimum radius of a simple circular curve deflecting through 5°, is (A) 1618.9 m (B) 1816.9 m (C) 1718.9 m (D) 1817.9 m

Description : Minimum radius of a simple circular curve deflecting through 5°, is (A) 1618.9 m (B) 1816.9 m (C) 1718.9 m (D) 1817.9 m

Last Answer : Answer: Option C

Ideally, the damping torque should be

Description : Ideally, the damping torque should be  (1) Proportional to velocity of the moving system and operating current.  (2) Proportional to the velocity of the moving system but independent of operating ... operating current.  (4) Independent of the velocity of the moving system and operating current.

Last Answer : Ideally, the damping torque should be Proportional to the velocity of the moving system but independent of operating current. 

The meter which does not have any component in it to provide control torque is

Description : The meter which does not have any component in it to provide control torque is (A) Electrodynamometer for current measurement (B) Electrodynamometer for voltage measurement (C) Electrodynamometer for power measurement. (D) Electrodynamometer for power factor measurement.

Last Answer : The meter which does not have any component in it to provide control torque is Electrodynamometer for power factor measurement.

In an energy meter braking torque is produced to

Last Answer : In an energy meter braking torque is produced to maintain steady speed and equal to driving torque

In a meggar controlling torque is provided by?

Last Answer : In a meggar controlling torque is provided by coil.

In a shaft shear stress intensity at a point is not (A) Directly proportional to the distance from the axis (B) Inversely proportional to the distance from the axis (C) Inversely proportional to the polar moment of inertia (D) Directly proportional to the applied torque

Description : In a shaft shear stress intensity at a point is not (A) Directly proportional to the distance from the axis (B) Inversely proportional to the distance from the axis (C) Inversely proportional to the polar moment of inertia (D) Directly proportional to the applied torque

Last Answer : (B) Inversely proportional to the distance from the axis

The torque, in a _____________is proportional to the square of the armature current (A) DC shunt motor (B) stepper motor (C) 2-phase servomotor (D) DC series motor

Description : The torque, in a _____________is proportional to the square of the armature current (A) DC shunt motor (B) stepper motor (C) 2-phase servomotor (D) DC series motor

Last Answer : (D) DC series motor

The torque, in a_______ is proportional to the square of the armature current.

Description : The torque, in a_______ is proportional to the square of the armature current. (A) DC shunt motor (C) 2 -phase servomotor (B) stepper motor (D) DC series motor

Last Answer : The torque, in a DC series motor is proportional to the square of the armature current. 

The armature torque of the D.C. shunt motor is proportional to?

Last Answer : The armature torque of the D.C. shunt motor is proportional to armature current.

iv) A rectangular coil free to rotate is placed in uniform magnetic field with its plane parallel to the magnetic lines of force. Then the coil willa) rotate to maximize the magnetic flux through its plane. b)rotate to minimize the magnetic flux through its plane.c) not experience any torque since the magnetic flux through its plane is zero.d) experience the constant torque equal to NBIA

Description : iv) A rectangular coil free to rotate is placed in uniform magnetic field with its plane parallel to the magnetic lines of force. Then the coil willa) rotate to maximize the magnetic flux through ... since the magnetic flux through its plane is zero.d) experience the constant torque equal to NBIA

Last Answer : iv) A rectangular coil free to rotate is placed in uniform magnetic field with its plane parallel ... d) experience the constant torque equal to NBIA

The rectangular coil of area A is in a field B. Find the torque about the Z-axis when the coil lies in the position shown and carries a current I.

Description : The rectangular coil of area A is in a field B. Find the torque about the Z-axis when the coil lies in the position shown and carries a current I.

Last Answer : The rectangular coil of area A is in a field B. Find the torque about the Z-axis when the coil ... 2IAM in positive Z-axis D. 2IAB in negative Z-axis

A 100 turns coil shown in figure carries a current of 2 amp in a magnetic field `B=0.2 Wb//m^(2)`. The torque acting on the coil is

Description : A 100 turns coil shown in figure carries a current of 2 amp in a magnetic field `B=0.2 Wb//m^(2)`. The torque acting on the coil is

Last Answer : A 100 turns coil shown in figure carries a current of 2 amp in a magnetic field `B=0.2 Wb//m^( ... N-m` tending to rotate the side AD into of the page

A circular coil of `20turns` and radius `10cm` carries a current of `5A`. It is placed in a uniform magnetic field of `0*10T`. Find the torque acting

Description : A circular coil of `20turns` and radius `10cm` carries a current of `5A`. It is placed in a uniform magnetic field of `0*10T`. Find the torque acting

Last Answer : A circular coil of `20turns` and radius `10cm` carries a current of `5A`. It is placed in a uniform magnetic ... Nm B. 3.14 Nm C. 0.314 Nm D. zero

Current `i` is carried in a wire of length `L`. If the wire is turned into a circular coil, the maximum magnitude of torque in a given magnetic field

Description : Current `i` is carried in a wire of length `L`. If the wire is turned into a circular coil, the maximum magnitude of torque in a given magnetic field

Last Answer : Current `i` is carried in a wire of length `L`. If the wire is turned into a circular coil, the maximum magnitude ... iB)/(4pi)` D. `(L^(2)B)/(4pi)`