Avalanche break down in a semiconductor diode occurs when

by

1 Answer

Answer :

Avalanche break down in a semiconductor diode occurs when Reverse bias exceeds a certain value

by

Related questions

In a semiconductor diode, p-side is earthed and to n-side is applied a potential of -2 volt; the diode shall (a) Conduct (b) Not conduct (c) Conduct partially (d) Break down

Description : In a semiconductor diode, p-side is earthed and to n-side is applied a potential of -2 volt; the diode shall (a) Conduct (b) Not conduct (c) Conduct partially (d) Break down

Last Answer : a) Conduct

Avalanche breakdown in a diode occurs when a. Potential barrier is reduced to zero. b. Forward current exceeds certain value. c. Reverse bias exceeds a certain value. d. None of these

Description : Avalanche breakdown in a diode occurs when a. Potential barrier is reduced to zero. b. Forward current exceeds certain value. c. Reverse bias exceeds a certain value. d. None of these

Last Answer : c. Reverse bias exceeds a certain value.

Zener effect and avalanche effect are the two possible break down mechanisms that helps the external current . Why ?

Description : Zener effect and avalanche effect are the two possible break down mechanisms that helps the external current . Why ?

Last Answer : Zener effect : The electric field in the depletion layer reach a point that it can break the covalent bonds and generate electron-hole pairs. Avalanche breakdown : The minority carriers that ... field gain sufficient kinetic energy to be able to break covalent bond in atoms which they collide.

For highly doped diode: a) Zener breakdown is likely to take place b) Avalanche breakdown is likely to take place c) Either (a) or (b) can take place d) Neither (a) nor (b) can take place

Description : For highly doped diode: a) Zener breakdown is likely to take place b) Avalanche breakdown is likely to take place c) Either (a) or (b) can take place d) Neither (a) nor (b) can take place

Last Answer : Ans: A

Component 'CR1' shown in the illustration is called a/an _______________. EL-0085 A. avalanche diode B. Zener diode C. breakdown diode D. all of the above

Description : Component 'CR1' shown in the illustration is called a/an _______________. EL-0085 A. avalanche diode B. Zener diode C. breakdown diode D. all of the above

Last Answer : Answer: D

During avalanche effect breakdown, what limits current flow through the diode?

Description : During avalanche effect breakdown, what limits current flow through the diode?

Last Answer : an external current-limiting resistor

What is the doping level of an avalanche effect diode when compared to the doping level of a Zener-effect diode?

Description : What is the doping level of an avalanche effect diode when compared to the doping level of a Zener-effect diode?

Last Answer : The doping level of an avalanche effect diode is lower.

What causes dc bias energy to be absorbed by avalanche electrons and given up to the microwave field applied to an avalanche transit-time diode?

Description : What causes dc bias energy to be absorbed by avalanche electrons and given up to the microwave field applied to an avalanche transit-time diode?

Last Answer : The negative-resistance property.

What is the junction arrangement of the original avalanche transit-time diode?

Description : What is the junction arrangement of the original avalanche transit-time diode?

Last Answer : Pnin.

Which of the following is the fastest light sensor? ∙ A. PIN photodiode ∙ B. Photovoltaic diode ∙ C. Photodiode ∙ D. Avalanche photodiode

Description : Which of the following is the fastest light sensor? ∙ A. PIN photodiode ∙ B. Photovoltaic diode ∙ C. Photodiode ∙ D. Avalanche photodiode

Last Answer : Avalanche photodiode

Which of the following is the fastest light sensor? ∙ A. PIN photodiode ∙ B. Photovoltaic diode ∙ C. Photodiode ∙ D. Avalanche photodiode

Description : Which of the following is the fastest light sensor? ∙ A. PIN photodiode ∙ B. Photovoltaic diode ∙ C. Photodiode ∙ D. Avalanche photodiode

Last Answer : D. Avalanche photodiode

Which of the following is the fastest light sensor ∙ a. PIN photodiode ∙ b. Photovoltaic diode ∙ c. Phototransistor ∙ d. Avalanche photodiode

Description : Which of the following is the fastest light sensor ∙ a. PIN photodiode ∙ b. Photovoltaic diode ∙ c. Phototransistor ∙ d. Avalanche photodiode

Last Answer : ∙ d. Avalanche photodiode

Which of the following is NOT a common light detector ∙ a. PIN photodiode ∙ b. Photovoltaic diode ∙ c. Photodiode ∙ d. Avalanche photodiode

Description : Which of the following is NOT a common light detector ∙ a. PIN photodiode ∙ b. Photovoltaic diode ∙ c. Photodiode ∙ d. Avalanche photodiode

Last Answer : ∙ b. Photovoltaic diode

Avalanche diode

Description : Avalanche diode

Last Answer : .embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }

When using an ohmmeter to test a semiconductor diode, you find a low resistance in both the forward and reverse bias directions. This indicates that the diode has a/an ____________. A. open B. short C. good resistive quality D. good capacitive quality

Description : When using an ohmmeter to test a semiconductor diode, you find a low resistance in both the forward and reverse bias directions. This indicates that the diode has a/an ____________. A. open B. short C. good resistive quality D. good capacitive quality

Last Answer : Answer: B

A semiconductor that decreases in resistance with an increase in temperature is known as a _____________. A. resistor B. thermistor C. diode D. thermopile

Description : A semiconductor that decreases in resistance with an increase in temperature is known as a _____________. A. resistor B. thermistor C. diode D. thermopile

Last Answer : Answer: B

It is the made from semiconductor material such as aluminum-galium-arsenide or gallium-arsenide-phosphide. A. APD B. Injection laser diode C. Light emitting diode D. Positive-intrinsic-negative

Description : It is the made from semiconductor material such as aluminum-galium-arsenide or gallium-arsenide-phosphide. A. APD B. Injection laser diode C. Light emitting diode D. Positive-intrinsic-negative

Last Answer : C. Light emitting diode

What is a semiconductor diode or junction diode?

Description : What is a semiconductor diode or junction diode?

Last Answer : A diode is a single crystal of semiconducting material which is doped one side with a donor impurity and the other side with acceptor impurity.

What type of PN diode is formed by using a fine metal wire and a section of N-type semiconductor material?

Description : What type of PN diode is formed by using a fine metal wire and a section of N-type semiconductor material?

Last Answer : Point-contact.

The reverse current through semiconductor diode is due to (a) Minority carrier (b) majority carrier (c) electrons (d) holes

Description : The reverse current through semiconductor diode is due to (a) Minority carrier (b) majority carrier (c) electrons (d) holes

Last Answer : (a) Minority carrier

A semiconductor device made up of a single p-n Junction is called a: w) transistor x) diode y) Fet z) integrated circuit

Description : A semiconductor device made up of a single p-n Junction is called a: w) transistor x) diode y) Fet z) integrated circuit

Last Answer : ANSWER: X -- DIODE

Which semiconductor device acts like a diode and two transistor : -

Description : Which semiconductor device acts like a diode and two transistor : -  a) SCR b) Triac c) UJT d) Diac

Last Answer : Which semiconductor device acts like a diode and two transistor : - UJT

n-type semiconductor can be made by adding ____ to intrinsic semiconductor

Description : n-type semiconductor can be made by adding ____ to intrinsic semiconductor (A) Boron (B) Arsenic (C) Carbon (D) Germanium

Last Answer : n-type semiconductor can be made by adding Arsenic to intrinsic semiconductor

A snubber circuit is connected to the power semiconductor device to reduce the

Description : A snubber circuit is connected to the power semiconductor device to reduce the (A) turn-on time (B) turn-off time (C) electrical stresses (D) thermal resistance

Last Answer : A snubber circuit is connected to the power semiconductor device to reduce the electrical stresses

The Semiconductor strain gauges typically have much higher gauge factors than those of metallic strain

Description : The Semiconductor strain gauges typically have much higher gauge factors than those of metallic strain gauges, primarily due to : (A) higher temperature sensitivity (B) higher Poisson’s ratio (C) higher piezoresitive coefficient (D) higher magnetostrictive coefficient

Last Answer : The Semiconductor strain gauges typically have much higher gauge factors than those of metallic strain gauges, primarily due to : higher piezoresitive coefficient

When the temperature of a doped semiconductor is increased, its conductivity...

Description : When the temperature of a doped semiconductor is increased, its conductivity  (1) Decreases (2) Increases (3) Does not change (4) Increases or decreases depending on whether it is p-type or n-type

Last Answer : When the temperature of a doped semiconductor is increased, its conductivity Increases.

Which of the following semiconductor materials is (are) used for manufacturing solar cells?

Description : Which of the following semiconductor materials is (are) used for manufacturing solar cells?  (1) Gallium arsenide (2) Indium arsenide (3) Cadmium sulfide (4) All of these

Last Answer : All of these.

In a P type semiconductor

Last Answer : In a P type semiconductor At room temperature the hole concentration equals the acceptor concentration

Do holes move in semiconductor?

Description : Do holes move in semiconductor?

Last Answer : Never,holes is just our assumption we say the vacancy of electrons is hole.hole are always remain just electrons move through it.means vacancy change in continuous manner.it look like hole are moving.

Categories of semiconductor components (Integrated circuit families)

Last Answer : Categories of semiconductor components (Integrated circuit families) Integrated circuits are made from semiconductor material These are divided into three main categories A) ... minus, true or false etc. common families include Transistor Transistor Logic (TTL), CMOS, MOSFET.

Suggest the diode material suitable to rectify 0.5V AC signal.

Description : Suggest the diode material suitable to rectify 0.5V AC signal.

Last Answer : The diode material suitable to rectify 0.5V AC signal is silicon

Draw symbols of zener diode and LED.

Description : Draw symbols of zener diode and LED.

Last Answer : Symbol of zener diode : Symbol of LED

The following is not an application of varactor diode:

Description : The following is not an application of varactor diode:  a) Parametric amplifier b) Frequency tuner c) Voltage controlled oscillator d) Phase shifter

Last Answer : The following is not an application of varactor diode:  a) Parametric amplifier b) Frequency tuner c) Voltage controlled oscillator d) Phase shifter

A light emitting diode (L.E.D.) can be made from:

Description : A light emitting diode (L.E.D.) can be made from:

Last Answer : Different compound use to get various colors Ex:-  GaAs (gallium arsenide) > infared GaAsP (gallium arsenide phosphide) > Red, gallium(III) phosphide > green, InGaN (Indium gallium nitride) > Blue

A single-phase full-bridge diode rectifier delivers a load current of 10A, which is ripple free.

Description : A single-phase full-bridge diode rectifier delivers a load current of 10A, which is ripple free. Average and rms values of diode currents are respectively   (a) 10A, 7.07A (b) 5A, 10A (c) 5A, 7.07A (d) 7.07A, 5A

Last Answer : A single-phase full-bridge diode rectifier delivers a load current of 10A, which is ripple free. Average and rms values of diode currents are respectively 5A, 7.07A

Which diode exhibits negative resistance characteristic?

Description : Which diode exhibits negative resistance characteristic? (A) LED (B) Zener (C) Tunnel diode (D) PN diode

Last Answer : Which diode exhibits negative resistance characteristic? (A) LED (B) Zener (C) Tunnel diode (D) PN diode

A PIN diode is: ....

Description : A PIN diode is:  (1) A metal semiconductor point-contact diode (2) A microwave mixer diode (3) Often used as a microwave detector (4) Suitable for use as a microwave switch

Last Answer : A PIN diode is: Suitable for use as a microwave switch.

Gunn diode is a: ...

Description : Gunn diode is a:  (1) Negative resistance device (2) Positive resistance device (3) High noise device (4) Low frequency device

Last Answer : Gunn diode is a: Negative resistance device.

A Zener diode is operated in the - - - -region

Last Answer : A Zener diode is operated in the Breakdown Region 

A Zener diode is operated in the …… mode as a voltage stabiliser.

Last Answer : A Zener diode is operated in the Reverse bias around the knee of breakdown region mode as a voltage stabilizer.

How can you identify a zener diode?

Description : How can you identify a zener diode?

Last Answer : It  conducts  current  in  either  direction.

How do we test a diode?

Description : How do we test a diode?

Last Answer : test

Applications of zener diode

Last Answer : Applications of zener diode are : Zener diode can be use for voltage regulator. Zener diode can be use for clippers or limiters. Zener diode can be use for overvoltage protection. Zener ... reference. Zener diode can be use as transistor regulator. These are some applications of zener diode.

What is the depletion region of a diode?

Description : What is the depletion region of a diode?

Last Answer : During the fussion In diode the some hole and electrons from both side created one layer at middle Its width  increase when diode is in reverse bias conditions And decreased in.forward bias conditions.

How much time a diode takes to switch ON in forward bias

Description : How much time a diode takes to switch ON in forward bias condition.

Last Answer : t=0 sec.

what is the leakage current of diode?

Last Answer : In Reverse bias of diode when the cathode is connected to positive and anode is connected to negative very small current flows this very small current is known as leakage current of diode.

when a diode conducts?

Last Answer : Diode conducts when the anode voltage is greater than the cathode voltage.

Diode have how many terminals?

Last Answer : Diode have two terminals.

What is diode?

Description : What is diode?

Last Answer : Diode (1) a two-terminal device that permits the flow of electric current in only one direction. Diodes are most often constructed by abutting n-type and p-type regions of a semiconductor, ... power applications (rectifier diodes). (2) a two terminal device that conducts in only one direction.