What causes dc bias energy to be absorbed by avalanche electrons and given up to the microwave field applied to an avalanche transit-time diode?

What causes dc bias energy to be absorbed by avalanche  electrons and given up to the microwave field applied to an  avalanche transit-time diode?
by

1 Answer

Answer :

The negative-resistance property.
by

Related questions

What is the junction arrangement of the original avalanche transit-time diode?

Description : What is the junction arrangement of the original avalanche transit-time diode?

Last Answer : Pnin.

Avalanche breakdown in a diode occurs when a. Potential barrier is reduced to zero. b. Forward current exceeds certain value. c. Reverse bias exceeds a certain value. d. None of these

Description : Avalanche breakdown in a diode occurs when a. Potential barrier is reduced to zero. b. Forward current exceeds certain value. c. Reverse bias exceeds a certain value. d. None of these

Last Answer : c. Reverse bias exceeds a certain value.

During avalanche effect breakdown, what limits current flow through the diode?

Description : During avalanche effect breakdown, what limits current flow through the diode?

Last Answer : an external current-limiting resistor

What is the doping level of an avalanche effect diode when compared to the doping level of a Zener-effect diode?

Description : What is the doping level of an avalanche effect diode when compared to the doping level of a Zener-effect diode?

Last Answer : The doping level of an avalanche effect diode is lower.

The electrons in the beam of a klystron are speeded up by a high dc potential applied to what elements?

Description : The electrons in the beam of a klystron are speeded up by a high dc potential applied to what elements?

Last Answer : The accelerator grid and the buncher grids.

What type of bias makes a diode act as a closed switch?

Description : What type of bias makes a diode act as a closed switch?

Last Answer : Forward bias.

When a reverse bias is applied to a diode, it will a. Raise the potential barrier b. Lower the potential barrier c. Increases the majority-carrier a current greatly d. None of these

Description : When a reverse bias is applied to a diode, it will a. Raise the potential barrier b. Lower the potential barrier c. Increases the majority-carrier a current greatly d. None of these

Last Answer : a. Raise the potential barrier

When reverse bias is applied to a junction diode, it

Description : When reverse bias is applied to a junction diode, it  1.increases the potential barrier 2.decreases the potential barrier 3.greatly increases the minority carrier current 4.greatly increases the majority carrier current 

Last Answer : When reverse bias is applied to a junction diode, it increases the potential barrier 

To properly bias an NPN transistor, what polarity voltage is applied to the collector, and what is its relationship to the base voltage?

Description : To properly bias an NPN transistor, what polarity voltage is applied to the collector, and what is its relationship to the base voltage?

Last Answer : Positive, more positive.

Why does using ac vice dc bias voltage result in a stronger output signal?

Description : Why does using ac vice dc bias voltage result in a stronger output signal?

Last Answer : Because an ac bias voltage of the proper frequency and level places the input signal away from both steps in the magnetism curve. The result is two undistorted output signals that are combined into one strong output.

What are three advantages of adding an ac bias voltage to the input signal instead of adding a fixed dc bias voltage?

Description : What are three advantages of adding an ac bias voltage to the input signal instead of adding a fixed dc bias voltage?

Last Answer : a. Reproduces a stronger output signal. b. Greatly improves the SNR. c. Greatly reduces the natural tape hiss.

Why does adding dc vice ac bias voltage to the input signal result in a poor signal-to-noise ratio (SNR)?

Description : Why does adding dc vice ac bias voltage to the input signal result in a poor signal-to-noise ratio (SNR)?

Last Answer : With dc bias, the SNR is poor because only a small portion of the magnetism curve is straight enough to use, thus the output signal is weak compared with the natural tape hiss.

How does dc bias added to the input signal correct the distortion in the output signal?

Description : How does dc bias added to the input signal correct the distortion in the output signal?

Last Answer : The dc bias moves the input signal away from the step in the magnetism curve. This prevents the input signal from crossing the zero-point of the magnetism curve.

For highly doped diode: a) Zener breakdown is likely to take place b) Avalanche breakdown is likely to take place c) Either (a) or (b) can take place d) Neither (a) nor (b) can take place

Description : For highly doped diode: a) Zener breakdown is likely to take place b) Avalanche breakdown is likely to take place c) Either (a) or (b) can take place d) Neither (a) nor (b) can take place

Last Answer : Ans: A

Component 'CR1' shown in the illustration is called a/an _______________. EL-0085 A. avalanche diode B. Zener diode C. breakdown diode D. all of the above

Description : Component 'CR1' shown in the illustration is called a/an _______________. EL-0085 A. avalanche diode B. Zener diode C. breakdown diode D. all of the above

Last Answer : Answer: D

Which of the following is the fastest light sensor? ∙ A. PIN photodiode ∙ B. Photovoltaic diode ∙ C. Photodiode ∙ D. Avalanche photodiode

Description : Which of the following is the fastest light sensor? ∙ A. PIN photodiode ∙ B. Photovoltaic diode ∙ C. Photodiode ∙ D. Avalanche photodiode

Last Answer : Avalanche photodiode

Which of the following is the fastest light sensor? ∙ A. PIN photodiode ∙ B. Photovoltaic diode ∙ C. Photodiode ∙ D. Avalanche photodiode

Description : Which of the following is the fastest light sensor? ∙ A. PIN photodiode ∙ B. Photovoltaic diode ∙ C. Photodiode ∙ D. Avalanche photodiode

Last Answer : D. Avalanche photodiode

Which of the following is the fastest light sensor ∙ a. PIN photodiode ∙ b. Photovoltaic diode ∙ c. Phototransistor ∙ d. Avalanche photodiode

Description : Which of the following is the fastest light sensor ∙ a. PIN photodiode ∙ b. Photovoltaic diode ∙ c. Phototransistor ∙ d. Avalanche photodiode

Last Answer : ∙ d. Avalanche photodiode

Which of the following is NOT a common light detector ∙ a. PIN photodiode ∙ b. Photovoltaic diode ∙ c. Photodiode ∙ d. Avalanche photodiode

Description : Which of the following is NOT a common light detector ∙ a. PIN photodiode ∙ b. Photovoltaic diode ∙ c. Photodiode ∙ d. Avalanche photodiode

Last Answer : ∙ b. Photovoltaic diode

Avalanche diode

Description : Avalanche diode

Last Answer : .embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }

Avalanche break down in a semiconductor diode occurs when

Last Answer : Avalanche break down in a semiconductor diode occurs when Reverse bias exceeds a certain value

A large negative voltage is applied to the plate of a diode, and a largewhat tube parameter has been exceeded?

Description : A large negative voltage is applied to the plate of a diode, and a largewhat tube parameter has been exceeded?

Last Answer : Peak Inverse Voltage (PIV).

An ac voltage is applied across a diode. The tube will conduct when

Description : An ac voltage is applied across a diode. The tube will conduct when

Last Answer : Positive.

In reference to the schematic symbol for a diode, do electrons flow toward or away from the arrow?

Description : In reference to the schematic symbol for a diode, do electrons flow toward or away from the arrow?

Last Answer : Toward the arrow.

The interaction between an external field and the binding force of an atom causes electrons to do what?

Description : The interaction between an external field and the binding force of an atom causes electrons to do what?

Last Answer : Wobble at a natural resonant frequency.

A synchronous motor maintains synchronism with the rotating field because _____________. A. field strength varies directly with rotor slip B. DC current applied to the rotor coils causes the rotor magnets to lock in with the rotating flux of the stator C. the stator poles are dragged around due to the flux created by the excitation current D. the stator flux rotates in the opposite direction

Description : A synchronous motor maintains synchronism with the rotating field because _____________. A. field strength varies directly with rotor slip B. DC current applied to the rotor coils causes the rotor ... the flux created by the excitation current D. the stator flux rotates in the opposite direction

Last Answer : Answer: B

Describe avalanche multiplication.

Description : Describe avalanche multiplication.

Last Answer : The electrons initially generated by the incident photons accelerate as they move through the APD active region. As these electrons collide with electrons in the semiconductor material, they cause a fraction of them to become part of the photocurrent.

What are the electrons called that give up energy to the ac field in a magnetron?

Description : What are the electrons called that give up energy to the ac field in a magnetron?

Last Answer : Working electrons.

How much time a diode takes to switch ON in forward bias

Description : How much time a diode takes to switch ON in forward bias condition.

Last Answer : t=0 sec.

Junction breakdown occurs: a) With forward bias b) With reverse bias c) Under high temperature condition d) Because of excess heating of the diode

Description : Junction breakdown occurs: a) With forward bias b) With reverse bias c) Under high temperature condition d) Because of excess heating of the diode

Last Answer : Ans: B

When using an ohmmeter to test a semiconductor diode, you find a low resistance in both the forward and reverse bias directions. This indicates that the diode has a/an ____________. A. open B. short C. good resistive quality D. good capacitive quality

Description : When using an ohmmeter to test a semiconductor diode, you find a low resistance in both the forward and reverse bias directions. This indicates that the diode has a/an ____________. A. open B. short C. good resistive quality D. good capacitive quality

Last Answer : Answer: B

A device used to avoid the relay destroying the op-amp is A. diode B. LED C. reverse bias diode D. forward biased diode

Description :  A device used to avoid the relay destroying the op-amp is A. diode B. LED C. reverse bias diode D. forward biased diode

Last Answer : reverse bias diode

On increasing the reverse bias to a large value in a p-n junction diode current (a) Increases slowly (b) Remains fixed (c) Suddenly increases (d) Decreases slowly

Description : On increasing the reverse bias to a large value in a p-n junction diode current (a) Increases slowly (b) Remains fixed (c) Suddenly increases (d) Decreases slowly

Last Answer : (c) Suddenly increases

Photo diode operates in the _______ condition (a) Forward bias (b) null (c) both a & d (d) reverse bias

Description : Photo diode operates in the _______ condition (a) Forward bias (b) null (c) both a & d (d) reverse bias

Last Answer : (d) reverse bias

Explain with neat sketch construction of PIN Diode. Draw its characteristics in reverse bias mode.

Description : Explain with neat sketch construction of PIN Diode. Draw its characteristics in reverse bias mode. 

Last Answer : Construction A PIN diode is made up of three semiconductor materials; two heavily doped P- and N- type material separated by an intrinsic (undoped) semiconductor (I) as shown in above figure ... . This advantage allows the PIN diode to process even weak signals.  Characteristics

Define i)P-N junction diode ii) Depletion layer iii)Forward bias iv)Reverse bias of P-N junction diode

Description : Define i)P-N junction diode ii) Depletion layer iii)Forward bias iv)Reverse bias of P-N junction diode

Last Answer : i)P-N junction diode: It is a semiconductor device in which half of its region is P-type and other half is N-type.  ii) Depletion layer: The region where free electrons and free holes are absent ... and negative terminal is connected to p-side of p-n junction diode, it is said to be reverse bias.

Explain the forward bias characteristics of a P-N Junction diode.

Description : Explain the forward bias characteristics of a P-N Junction diode. 

Last Answer : forward and reverse characteristics of P-N junction diode.

A diode in which the change in reverse bias voltage varies the capacitance is called as

Description : A diode in which the change in reverse bias voltage varies the capacitance is called as A) Varactor diode B) Switching diode C) Tunnel diode D) Zener-diode  

Last Answer : A diode in which the change in reverse bias voltage varies the capacitance is called as Varactor diode

To turn a UJT ON, the forward bias on emitter diode should be:

Description : To turn a UJT ON, the forward bias on emitter diode should be:  1. more than the peak point voltage 2. less than the peak point voltage 3. Equal to the peak point voltage 4. Equal to the stand - off voltage  

Last Answer : To turn a UJT ON, the forward bias on emitter diode should be: more than the peak point voltage 

can zener diode be used in forward bias?

Last Answer : Yes it can be, and it will act like a normal PN junction diode. The characteristic of ZENER diode is exactly same as PN junction diode in forward Bias.

At frequencies above 100 megahertz, the intrinsic (i) region causes a pin diode to act as what?

Description : At frequencies above 100 megahertz, the intrinsic (i) region causes a pin diode to act as what?

Last Answer : Variable resistance.

How do uhf tubes counter the effects of transit time?

Description : How do uhf tubes counter the effects of transit time?

Last Answer : By reducing the spacing between tube elements.

What effect does transit time have on a conventional triode operated at uhf frequencies?

Description : What effect does transit time have on a conventional triode operated at uhf frequencies?

Last Answer : It causes the control grid to short to the cathode

Trade-offs between competing effects are necessary for high speed response. Which competing effect (fast transit time, low capacitance, or high quantum efficiency) requires a thin active area?

Description : Trade-offs between competing effects are necessary for high speed response. Which competing effect (fast transit time, low capacitance, or high quantum efficiency) requires a thin active area?

Last Answer : Fast transit time.

What characteristic of a gunn oscillator is inversely proportional to the transit time of the domain across the semiconductor?

Description : What characteristic of a gunn oscillator is inversely proportional to the transit time of the domain across the semiconductor?

Last Answer : The frequency.

How does transit time affect the relationship of the grid voltage and the plate current at high frequencies?

Description : How does transit time affect the relationship of the grid voltage and the plate current at high frequencies?

Last Answer : Transit time causes the grid voltage and plate current to be out of phase

DC Specific: How can I get from Arlington (Clarendon/Courthouse) to Glover Park (north of Georgetown) with public transit?

Description : DC Specific: How can I get from Arlington (Clarendon/Courthouse) to Glover Park (north of Georgetown) with public transit?

Last Answer : Did you try the Metro Trip Planner?

The constant-speed electrons of an electron bunch in a reflex klystron must remain in the repeller field for what minimum time?

Description : The constant-speed electrons of an electron bunch in a reflex klystron must remain in the repeller field for what minimum time?

Last Answer : Three-quarter cycle.

What type of bias (positive or negative) is added to a negative damper for the most positive extremity of the wave shape to be clamped above 0 volts?

Description : What type of bias (positive or negative) is added to a negative damper for the most positive extremity of the wave shape to be clamped above 0 volts?

Last Answer : Positive bias.

A negative damper with negative bias clamps the most positive extremity of the output wave shape to what polarity (positive or negative)?

Description : A negative damper with negative bias clamps the most positive extremity of the output wave shape to what polarity (positive or negative)?

Last Answer : Negative potential.