ADVM has a 4 ½ digit display. The 1 volts range can read up to :

ADVM has a 4 ½ digit display. The 1 volts range can read up to :
by
edited

1 Answer

Answer :

ADVM has a 4 ½ digit display. The 1 volts range can read up to : 1.9999

by

Related questions

A DVM has a 3 1/2 digit display. The 1 volt range can read upon

Description : A DVM has a 3 1/2 digit display. The 1 volt range can read upon

Last Answer : A DVM has a 3 1/2 digit display. The 1 volt range can read upon 1.999.

State significance of ½ digit with an example

Description : State significance of ½ digit with an example

Last Answer : The number of digit position in a digital meter determine the resolution. ½ digit has a maximum value of 1 and has 2 possible conditions (0 or 1). Hence 3 digit display on a DVM for a 0 -1 ... above 999 up to 1999, to give overlap between ranges for convenience, a process called over ranging. 

In 8085 microprocessor, the digit 5 indicates that the microprocessor needs (1) -5 volts, +5 volts supply (2) +5 volts supply only (3) -5 volts supply only (4) 5 MHz clock

Description : In 8085 microprocessor, the digit 5 indicates that the microprocessor needs (1) -5 volts, +5 volts supply (2) +5 volts supply only (3) -5 volts supply only (4) 5 MHz clock

Last Answer : Answer: 2

½ of the interquartile range is

Description : ½ of the interquartile range is

Last Answer : Ans. Quartile deviation

What type of instrument is used to measure dc voltage of the order 5 volts?

Description : What type of instrument is used to measure dc voltage of the order 5 volts? (A) moving iron type (B) electro-static type (C) moving coil type (D) all of these

Last Answer : Permanent Magnet Moving Coil (PMMC) voltmeter is used to  measure the DC voltage. We can also use moving iron meter, but it has more error compared to moving coil.

A 4-bit R/2R digital-to-analog (DAC) converter has a reference of 5 volts. What is the analog output for the...

Description : A 4-bit R/2R digital-to-analog (DAC) converter has a reference of 5 volts. What is the analog output for the input code 1010:  (1) 0.3125 V (2) 3.125 V (3) 0.78125 V (4) –3.125 V

Last Answer : 3.125V

A crow is sitting on a conductor carrying 11,000 volts

Last Answer : It will not die because it is insulated from earth and other conductors

A digit in base r will have a range from -Technology

Description : A digit in base r will have a range from -Technology

Last Answer : A digit in base R will have a range from0 to R-1.

When the circuit shown in the illustration is operating correctly, the voltage at the reference electrode will be kept in the optimum range of ____________. EL-0090 A. 0.01 - 0.05 volt B. 0.80 - 0.85 volt C. 35 - 60 volts D. 100 - 115 volts

Description : When the circuit shown in the illustration is operating correctly, the voltage at the reference electrode will be kept in the optimum range of ____________. EL-0090 A. 0.01 - 0.05 volt B. 0.80 - 0.85 volt C. 35 - 60 volts D. 100 - 115 volts

Last Answer : Answer: B

If the 'E/P converter' shown in the illustration operated on a range of 1-9 volts and 6-30 PSI, a 5 volt input would yield ______________. EL-0096 A. 9 PSI B. 15 PSI C. 18 PSI D. 24 PSI

Description : If the 'E/P converter' shown in the illustration operated on a range of 1-9 volts and 6-30 PSI, a 5 volt input would yield ______________. EL-0096 A. 9 PSI B. 15 PSI C. 18 PSI D. 24 PSI

Last Answer : Answer: C

I am a five-digit whole number, read the same forward, backward and upside down. My second digit is half my third digit; my fifth digit is the product of my first and last digits; and the sum of my whole is ten. What am I? -Riddles

Description : I am a five-digit whole number, read the same forward, backward and upside down. My second digit is half my third digit; my fifth digit is the product of my first and last digits; and the sum of my whole is ten. What am I? -Riddles

Last Answer : 10801

A three-phase alternator is operating at 450 volts with the switchboard ammeter indicating 300 amps. The kw meter currently indicates 163.6 KW, with a power factor of 0.7. If the power factor increases to 0.8, the KW meter would then read ____________. A. 181.4 KW B. 186.8 KW C. 194.2 KW D. 201.4 KW

Description : A three-phase alternator is operating at 450 volts with the switchboard ammeter indicating 300 amps. The kw meter currently indicates 163.6 KW, with a power factor of 0.7. If the power factor increases to 0.8, the KW meter would then read ____________. A. 181.4 KW B. 186.8 KW C. 194.2 KW D. 201.4 KW

Last Answer : Answer: B

Which of the following names refers to the highest energy spin state of an ¹H nucleus in a magnetic field? A. Spin-up B. Spin-down C. Parallel D. |+½>

Description : Which of the following names refers to the highest energy spin state of an ¹H nucleus in a magnetic field? A. Spin-up B. Spin-down C. Parallel D. |+½>

Last Answer : Spin-down

If cell range A1 : A5 contain the numbers 20, 16, 5, 35 and 7 then = AVERAGE(A1 : A5, 50) will display. -Technology

Description : If cell range A1 : A5 contain the numbers 20, 16, 5, 35 and 7 then = AVERAGE(A1 : A5, 50) will display. -Technology

Last Answer : The correct answer is(a) 22.167

Display the records between two range?

Description : Display the records between two range?

Last Answer : select rownum, empno, ename from emp where rowid in (select rowid from emp where rownum

ABC is a triangle right angled at C. A line through the mid-point M of hypotenuse AB and parallel to BC intersects AC at D. Show that (i) D is the mid-point of AC (ii) MD ⊥ AC (iii) CM = MA = ½ AB -Maths 9th

Description : ABC is a triangle right angled at C. A line through the mid-point M of hypotenuse AB and parallel to BC intersects AC at D. Show that (i) D is the mid-point of AC (ii) MD ⊥ AC (iii) CM = MA = ½ AB -Maths 9th

Last Answer : Solution: (i) In ΔACB, M is the midpoint of AB and MD || BC , D is the midpoint of AC (Converse of mid point theorem) (ii) ∠ACB = ∠ADM (Corresponding angles) also, ∠ACB = 90° , ∠ADM = 90° and MD ⊥ AC (iii ... SAS congruency] AM = CM [CPCT] also, AM = ½ AB (M is midpoint of AB) Hence, CM = MA = ½ AB

If 1 dozen eggs cost $18.00. What will be the cost of 2 ½ dozen eggs?

Description : If 1 dozen eggs cost $18.00. What will be the cost of 2 ½ dozen eggs?

Last Answer : $45, but i don't think you can buy 6 and half eggs, but you do you

Which of the following is not a valid size of a Floppy Disk? A) 8? B) 5 ¼? C) 3 ½? D) 5 ½?

Description : Which of the following is not a valid size of a Floppy Disk? A) 8? B) 5 ¼? C) 3 ½? D) 5 ½?

Last Answer : Answer : D

Km value of enzyme is substrate concentration at (A) ½ Vmax (B) 2 Vmax (C) ½ Vmax (D) 4 Vmax

Description : Km value of enzyme is substrate concentration at (A) ½ Vmax (B) 2 Vmax (C) ½ Vmax (D) 4 Vmax

Last Answer : Answer : D

The Michaelis constant, Km is (A) Numerically equal to ½ Vmax (B) Dependent on the enzyme concentration (C) Independent of pH (D) Numerically equal to the substrate concentration that gives half maximal velocity

Description : The Michaelis constant, Km is (A) Numerically equal to ½ Vmax (B) Dependent on the enzyme concentration (C) Independent of pH (D) Numerically equal to the substrate concentration that gives half maximal velocity

Last Answer : Answer : D

The normal glucose tolerance curve reaches peak is (A) 15 min (B) 1 hr (C) 2 hrs (D) 2 ½ hrs

Description : The normal glucose tolerance curve reaches peak is (A) 15 min (B) 1 hr (C) 2 hrs (D) 2 ½ hrs

Last Answer : B

An observer moves towards a stationary plane mirror at a speed of 1 m/s. His image will move towards him at a speed of (a) 1 m/s (b) 4 m/s (c) 2 m/s (d) ½ m/s

Description : An observer moves towards a stationary plane mirror at a speed of 1 m/s. His image will move towards him at a speed of (a) 1 m/s (b) 4 m/s (c) 2 m/s (d) ½ m/s

Last Answer : Ans:(c)

A body of mass M traveling with velocity v strikes body of mass M at rest. If the two bodies stick together during the collision, the loss of KE in the collision is (a) ½ initial KE (b) initial KE (c) All the initial KE (d) No loss of KE

Description : A body of mass M traveling with velocity v strikes body of mass M at rest. If the two bodies stick together during the collision, the loss of KE in the collision is (a) ½ initial KE (b) initial KE (c) All the initial KE (d) No loss of KE

Last Answer : Ans:(a)

How far away from the surface of the Earth does the acceleration due to gravity become ½ of its value at the surface of Earth? It is at a (a) Distance equal to radius (b) Distance equal to half the radius (c) Distance equal to twice the radius (d) Distance equal to 0.414 times the radius

Description : How far away from the surface of the Earth does the acceleration due to gravity become ½ of its value at the surface of Earth? It is at a (a) Distance equal to radius (b) Distance equal to half the radius (c) Distance equal to twice the radius (d) Distance equal to 0.414 times the radius

Last Answer : Ans:(d)

A particle of mass m moves in a circular path of radius r at constant speed v. Its KE is (a) mv2/r (b) ½ Iw (c) ½ mv2 (d) ½ mrw2

Description : A particle of mass m moves in a circular path of radius r at constant speed v. Its KE is (a) mv2/r (b) ½ Iw (c) ½ mv2 (d) ½ mrw2

Last Answer : Ans:(c)

The ratio of depths at partial flo A. 1 – B. 1 – C. ½ (1 – D. ½ (1 –

Description : The ratio of depths at partial flo A. 1 – B. 1 – C. ½ (1 – D. ½ (1 –

Last Answer : ANS: C

The sewers A. Must be of adequate size to avoid over flow B. Must flow under gravity ½ to ¾ full C. Must be laid at least 2 to 3 m deep to collect /water from the basements D. All the above

Description : The sewers A. Must be of adequate size to avoid over flow B. Must flow under gravity ½ to ¾ full C. Must be laid at least 2 to 3 m deep to collect /water from the basements D. All the above

Last Answer : ANS: D

running partially full with central angle , For a circular sewer of diameter A. d/D = ½ (1 – – B. a/A C. r/R = [1 – D. All the above

Description : running partially full with central angle , For a circular sewer of diameter A. d/D = ½ (1 – – B. a/A C. r/R = [1 – D. All the above

Last Answer : ANS: D

What is the usual electrical length of a driven element in an HF beam antenna? A. ¼ wavelength B. ¾ wavelength C. ½ wavelength D. 1 wavelength

Description : What is the usual electrical length of a driven element in an HF beam antenna? A. ¼ wavelength B. ¾ wavelength C. ½ wavelength D. 1 wavelength

Last Answer : C. ½ wavelength

The antenna effective height is ____ to ____ of the actual height. A. ½ to 2/3 B. ½ to ¾ C. ¼ to 2/3 D. ¼ to ¾

Description : The antenna effective height is ____ to ____ of the actual height. A. ½ to 2/3 B. ½ to ¾ C. ¼ to 2/3 D. ¼ to ¾

Last Answer : A. ½ to 2/3

ECE Board Exam March 1996 SSB transmission requires only ______ of the bandwidth for a DSBFC transmission. A. ¼ B. 2/3 C. ½ D. ¾

Description : ECE Board Exam March 1996 SSB transmission requires only ______ of the bandwidth for a DSBFC transmission. A. ¼ B. 2/3 C. ½ D. ¾

Last Answer : C. ½

ECE Board Exam March 1996 A word in telegraphy consist of __________ characters plus a word space. A. 11 B. 7 and ½ C. 8 D. 5

Description : ECE Board Exam March 1996 A word in telegraphy consist of __________ characters plus a word space. A. 11 B. 7 and ½ C. 8 D. 5

Last Answer : B. 7 and ½

Critical speed of rotation, N (in rps - rotation per second) of a trammel is equal to (where, g = acceleration due to gravity = 9.81 m/sec 2 and, r = radius of trammel, metre.) (A) (1/2π). √(g/r) (B) (1/π). √(g/r) (C) ½ √(g/r) (D) 2π. √(g/r)

Description : Critical speed of rotation, N (in rps - rotation per second) of a trammel is equal to (where, g = acceleration due to gravity = 9.81 m/sec 2 and, r = radius of trammel, metre.) (A) (1/2π). √(g/r) (B) (1/π). √(g/r) (C) ½ √(g/r) (D) 2π. √(g/r)

Last Answer : (A) (1/2π). √(g/r)

Rose budded at 3 ½ feet height is called a. Miniature rose b. Standard rose c. Half standard rose d. Climbing rose

Description : Rose budded at 3 ½ feet height is called a. Miniature rose b. Standard rose c. Half standard rose d. Climbing rose

Last Answer : Standard rose

Dormancy period in potato is about a. 2 Months b. 1 Month c. 3 Months d. ½ Month

Description : Dormancy period in potato is about a. 2 Months b. 1 Month c. 3 Months d. ½ Month

Last Answer : 2 Months

Mark correct option related to preservation period a) Nominal roll cum attendance & destruction of record register is permanent b) All records of registration and parcel dept except foreign article is 1 year c) All records of registration and parcel dept related fo foreign articles is 1 ½ year d) All records of MO is 1 ½ year, IPO 42 months, Book of MO receipt is 2 years e) All the above

Description : Mark correct option related to preservation period a) Nominal roll cum attendance & destruction of record register is permanent b) All records of registration and parcel dept except foreign article is 1 year c) All records ... 1 ½ year, IPO 42 months, Book of MO receipt is 2 years e) All the above

Last Answer : e) All the above

Mark correct option related to preservation period a) All records of mail department except due mail & sorting list 1 year b) Book of post marks(MS 18) & Postman book (MS-27) 1 ½ year c) Enumeration returns (MS-6) 2 years d) All monthly statistical registers 3 years e) All of the above

Description : Mark correct option related to preservation period a) All records of mail department except due mail & sorting list 1 year b) Book of post marks(MS 18) & Postman book (MS-27) 1 ½ year c) Enumeration returns (MS-6) 2 years d) All monthly statistical registers 3 years e) All of the above

Last Answer : e) All of the above

In the manufacture of ortho-phosphoric acid by strong H2SO4 leaching wet process, keeping the reactor temperature above 100°C, results in the formation of undesirable (A) CaSO4 .½ H2O and CaSO4 crystals (B) Pyrophosphoric acid (C) Meta-phosphoric acid (D) All (A), (B) and (C)

Description : In the manufacture of ortho-phosphoric acid by strong H2SO4 leaching wet process, keeping the reactor temperature above 100°C, results in the formation of undesirable (A) CaSO4 .½ H2O and CaSO4 crystals (B) Pyrophosphoric acid (C) Meta-phosphoric acid (D) All (A), (B) and (C)

Last Answer : (A) CaSO4 .½ H2O and CaSO4 crystals

The ratio of circumferential stress to the longitudinal stress in the walls of a cylindrical shell, due to flowing liquid, is (A) ½ (B) 1 (C) 1½ (D) 2

Description : The ratio of circumferential stress to the longitudinal stress in the walls of a cylindrical shell, due  to flowing liquid, is  (A) ½  (B) 1  (C) 1½  (D) 2 

Last Answer : (D) 2 

The area of a plane triangle ABC, having its base AC and perpendicular height , is (A) ½ bh (B) ½ ba sin C (C) ½ bc sin A (D) All the above

Description : The area of a plane triangle ABC, having its base AC and perpendicular height , is  (A) ½ bh (B) ½ ba sin C (C) ½ bc sin A (D) All the above

Last Answer : (D) All the above

If f1 and f2 are the distances from the optical centre of a convex lens of focal length to conjugate two points P1 and P2 respectively, the following relationship holds good (A) f = f1 + f2 (B) f = ½ (f1 + f2) (C) 1/f = 1/f1 + 1/f2 (D) None of these

Description : If f1 and f2 are the distances from the optical centre of a convex lens of focal length to conjugate two points P1 and P2 respectively, the following relationship holds good (A) f = f1 + f2 (B) f = ½ (f1 + f2) (C) 1/f = 1/f1 + 1/f2 (D) None of these

Last Answer : (C) 1/f = 1/f1 + 1/f2

Accuracy of elevation of various points obtained from contour map is limited to (A) ½ of the contour interval (B) ¼ th of the contour interval (C) rd of the contour interval (D) th of the contour interval

Description : Accuracy of elevation of various points obtained from contour map is limited to (A) ½ of the contour interval (B) ¼ th of the contour interval (C) rd of the contour interval (D) th of the contour interval

Last Answer : (A) ½ of the contour interval

If is the difference in level between end points separated by , then the slope correction is [(h²/2l) + (h 4 /8l3 )]. The second term may be neglected if the value of in a 20 m distance is less than (A) ½ m (B) 1 m (C) 2 m (D) 3 m

Description : If is the difference in level between end points separated by , then the slope correction is [(h²/2l) + (h 4 /8l3 )]. The second term may be neglected if the value of in a 20 m distance is less than (A) ½ m (B) 1 m (C) 2 m (D) 3 m

Last Answer : (D) 3 m

Strain energy of a member may be equated to (A) Average resistance × displacement (B) ½ stress × strain × area of its cross-section (C) ½ stress × strain × volume of the member (D) ½ (stress)2 × volume of the member + Young's modulus E

Description : Strain energy of a member may be equated to  (A) Average resistance × displacement  (B) ½ stress × strain × area of its cross-section  (C) ½ stress × strain × volume of the member  (D) ½ (stress)2  × volume of the member + Young's modulus E

Last Answer : (D) ½ (stress)2  × volume of the member + Young's modulus E

If the natural moisture content, the liquid limit and plastic limit of a soil sample are stated as 30.5%, 42.5% and 22.5% respectively, the ratio of liquidity index and plastic index, is (A) (B) ½ (C) 2 (D) 2½

Description : If the natural moisture content, the liquid limit and plastic limit of a soil sample are stated as 30.5%, 42.5% and 22.5% respectively, the ratio of liquidity index and plastic index, is (A) (B) ½ (C) 2 (D) 2½

Last Answer : Answer: Option C

A singly reinforced beam has breadth b, effective depth d, depth of neutral axis n and critical neutral axis n1. If fc and ft are permissible compressive and tensile stresses, the moment to resistance of the beam, is (A) bn (fc /2) (d - n/3) (B) Atft (d - n/3) (C) ½ n1 (1 - n1/3) cbd² (D) All the above

Description : A singly reinforced beam has breadth b, effective depth d, depth of neutral axis n and critical neutral axis n1. If fc and ft are permissible compressive and tensile stresses, the moment to resistance of the beam, is (A) bn (fc ... (B) Atft (d - n/3) (C) ½ n1 (1 - n1/3) cbd² (D) All the above

Last Answer : Answer: Option D

The coefficients of permeability of soils of an unconfined aquifer and another confined aquifer were determined by pumping water from the wells and observing the effect of water table in two test wells at equal distances was found to be equal. The total height of confined aquifer H is given by (A) H = h2 - h1 (B) H = h1 - h2 (C) H = h2 + h1 (D) ½ (h1 + h2)

Description : The coefficients of permeability of soils of an unconfined aquifer and another confined aquifer were determined by pumping water from the wells and observing the effect of water table in two test wells at equal distances was found to be equal. ... (B) H = h1 - h2 (C) H = h2 + h1 (D) ½ (h1 + h2)

Last Answer : Answer: Option D

If B is the width of formation, d is the height of the embankment, side slope S : 1, for a highway with no transverse slope, the area of cross-section is (A) B + d + Sd (B) Bd + Sd2 (C) B × d - Sd1/2 (D) ½ (Bd + Sd2

Description : If B is the width of formation, d is the height of the embankment, side slope S : 1, for a highway with no transverse slope, the area of cross-section is (A) B + d + Sd (B) Bd + Sd2 (C) B × d - Sd1/2 (D) ½ (Bd + Sd2

Last Answer : (B) Bd + Sd2

The cross-sectional area of the embankment of a canal fully in embankment in the given figure is (A) ½ ( + ) h (B) ( + ) h + sb² (C) ( + ) + 2sh² (D) 2 [( + ) (b + sh²)]

Description : The cross-sectional area of the embankment of a canal fully in embankment in the given figure is (A) ½ ( + ) h (B) ( + ) h + sb² (C) ( + ) + 2sh² (D) 2 [( + ) (b + sh²)]

Last Answer : (C) ( + ) + 2sh²