Which gas is liquefied under excessive pressure to form water in the form of soda ?

by

1 Answer

Answer :

Carbon dioxide 6
by

Related questions

Seema visited a Natural Gas Compressing Unit and found that the gas can be liquefied under specific conditions of temperature and pressure. -Maths 9th

Description : Seema visited a Natural Gas Compressing Unit and found that the gas can be liquefied under specific conditions of temperature and pressure. -Maths 9th

Last Answer : Cooling lowers the temperature of compressed gas and helps in liquefying it. Hence , a gas can be liquefied by applying high pressure and lowering the temperature (cooling).

Seema visited a Natural Gas Compressing Unit and found that the gas can be liquefied under specific conditions of temperature and pressure. -Maths 9th

Description : Seema visited a Natural Gas Compressing Unit and found that the gas can be liquefied under specific conditions of temperature and pressure. -Maths 9th

Last Answer : (c) Low temperature and high pressure are required to liquefy gases to liquids. There is a lot of space between the particles of a gas. On applying high pressure, the particles of gas move get ... it. Hence, a gas can be liquefied by applying high pressure and lowering the temperature (cooling).

Pick out the wrong statement. (A) At constant pressure, solubility of a gas in a liquid diminishes with rise in temperature (B) Normally, the gases which are easily liquefied are more soluble in common solvents (C) The gases which are capable of forming ions in aqueous solution are much more soluble in water than in other solvents (D) At constant pressure, solubility of a gas in a liquid increases with rise in temperature

Description : Pick out the wrong statement. (A) At constant pressure, solubility of a gas in a liquid diminishes with rise in temperature (B) Normally, the gases which are easily liquefied are more soluble ... (D) At constant pressure, solubility of a gas in a liquid increases with rise in temperature

Last Answer : (A) At constant pressure, solubility of a gas in a liquid diminishes with rise in temperature

The composition of fresh feed to the high temperature, high pressure urea autoclave is (A) Excess liquid ammonia and liquefied CO2 (B) Excess liquid ammonia and compressed CO2 gas (C) Liquid ammonia and excess compressed CO2 (D) Compressed ammonia gas and excess compressed CO2

Description : The composition of fresh feed to the high temperature, high pressure urea autoclave is (A) Excess liquid ammonia and liquefied CO2 (B) Excess liquid ammonia and compressed CO2 gas (C) Liquid ammonia and excess compressed CO2 (D) Compressed ammonia gas and excess compressed CO2

Last Answer : (B) Excess liquid ammonia and compressed CO2 gas

A gas can be liquefied by pressure alone only, when its temperature is __________ its critical temperature. (A) Less than (B) More than (C) Equal to or higher than (D) Less than or equal to

Description : A gas can be liquefied by pressure alone only, when its temperature is __________ its critical temperature. (A) Less than (B) More than (C) Equal to or higher than (D) Less than or equal to

Last Answer : (D) Less than or equal to

Liquefied Petroleum Gas (LPG) in domestic use cylinders is in the liquid form. The density of LPG in liquid form is about __________ of that of water (i.e. 1 gm/c.c). (A) One fourth (B) One third (C) Half (D) One eighth

Description : Liquefied Petroleum Gas (LPG) in domestic use cylinders is in the liquid form. The density of LPG in liquid form is about __________ of that of water (i.e. 1 gm/c.c). (A) One fourth (B) One third (C) Half (D) One eighth

Last Answer : (C) Half

Hydrogen can be (A) Used in I.C. engines as fuel (B) Liquefied & stored under cryogenic conditions (C) Produced by electrolysis of water (D) All (A), (B) & (C)

Description : Hydrogen can be (A) Used in I.C. engines as fuel (B) Liquefied & stored under cryogenic conditions (C) Produced by electrolysis of water (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

Which of the following gaseous fuels has the highest net calorific value (kcal/Nm3 )? (A) Producer gas (B) Carburetted water gas (C) Natural gas (D) Liquefied petroleum gas

Description : Which of the following gaseous fuels has the highest net calorific value (kcal/Nm3 )? (A) Producer gas (B) Carburetted water gas (C) Natural gas (D) Liquefied petroleum gas

Last Answer : (D) Liquefied petroleum gas

What is liquefied petroleum gas (LPG)?

Description : What is liquefied petroleum gas (LPG)?

Last Answer : Liquefied petroleum gas (LPG) is a type of gas that is compressed for use as a fuel in vehicles.

What is liquefied petroleum gas (LPG)?

Description : What is liquefied petroleum gas (LPG)?

Last Answer : Liquefied petroleum gas (LPG) is a mixture of propane and butane that's stored in a compressed liquid state and can be used as a fuel in certain types of engines.

What is liquefied petroleum gas (LPG)?

Description : What is liquefied petroleum gas (LPG)?

Last Answer : Liquefied petroleum gas

Liquefied Petroleum Gas consists of mainly which gases? -General Knowledge

Description : Liquefied Petroleum Gas consists of mainly which gases? -General Knowledge

Last Answer : The answer is 'Methane, butane and propane'

Liquefied Petroleum Gas consists of mainly which gases? -General Knowledge

Description : Liquefied Petroleum Gas consists of mainly which gases? -General Knowledge

Last Answer : answer:

Liquefied Petroleum Gas consists of mainly which gases? -General Knowledge

Description : Liquefied Petroleum Gas consists of mainly which gases? -General Knowledge

Last Answer : answer:

Domestic cooking gas consists mostly of (1) methane and ethane (2) liquefied butane and isobutene (3) hydrogen and acetylene (4) ethylene and carbon monoxide

Description : Domestic cooking gas consists mostly of (1) methane and ethane (2) liquefied butane and isobutene (3) hydrogen and acetylene (4) ethylene and carbon monoxide

Last Answer : (2) liquefied butane and isobutene Explanation: Domestic gas is another name for Liquefied Petroleum Gas (LPG). Varieties of LPG bought and sold include mixes that are primarily propane (C3H8), primarily ... propane and butane, depending on the season - in winter more propane, in summer more butane.

Liquefied Petroleum Gas consists of mainly which gases?

Description : Liquefied Petroleum Gas consists of mainly which gases?

Last Answer : Methane, butane and propane

. The condensate obtained on compression of wet natural gas is termed as (A) Liquefied natural gasoline (B) Natural gasoline (C) Liquid natural gas (D) None of these

Description : . The condensate obtained on compression of wet natural gas is termed as (A) Liquefied natural gasoline (B) Natural gasoline (C) Liquid natural gas (D) None of these

Last Answer : (B) Natural gasoline

Liquefied petroleum Gas (LPG) used for the household cooking comprises mainly of (A) Propane & butane (B) Butane & ethane (C) Methane & ethane (D) Methane & carbon monoxide

Description : Liquefied petroleum Gas (LPG) used for the household cooking comprises mainly of (A) Propane & butane (B) Butane & ethane (C) Methane & ethane (D) Methane & carbon monoxide

Last Answer : (A) Propane & butane

Mercaptans are added to liquefied petroleum gas (LPG) to (A) Reduce its cost (B) Narrow down its explosion limit (C) Assist in checking its leakage from cylinder (D) Increase its calorific value

Description : Mercaptans are added to liquefied petroleum gas (LPG) to (A) Reduce its cost (B) Narrow down its explosion limit (C) Assist in checking its leakage from cylinder (D) Increase its calorific value

Last Answer : (C) Assist in checking its leakage from cylinder

LPG stands for (A) Liquid petroleum gas (B) Liquefied petrol gas (C) Liquid petrol gas (D) Liquefied petroleum gas

Description : LPG stands for (A) Liquid petroleum gas (B) Liquefied petrol gas (C) Liquid petrol gas (D) Liquefied petroleum gas

Last Answer : (D) Liquefied petroleum gas

Liquefied Petroleum Gas (LPG) is mainly a mixture of (A) Propane & butane (B) Methane & ethane (C) High boiling olefins (D) High boiling naphthenes

Description : Liquefied Petroleum Gas (LPG) is mainly a mixture of (A) Propane & butane (B) Methane & ethane (C) High boiling olefins (D) High boiling naphthenes

Last Answer : (A) Propane & butane

Can a gas with a = 0 be liquefied?

Description : Can a gas with a = 0 be liquefied?

Last Answer : Ans. A gas with a = 0 means absence of intermolecular forces. Hence such a gas cannot be Liquified.

Which of the following fuel gases has the highest calorific value? (A) Natural gas (B) Coal bed methane (CBM) (C) Liquefied petroleum gas (LPG) (D) Sewage gas

Description : Which of the following fuel gases has the highest calorific value? (A) Natural gas (B) Coal bed methane (CBM) (C) Liquefied petroleum gas (LPG) (D) Sewage gas

Last Answer : (C) Liquefied petroleum gas (LPG)

Low grade coal is __________ to produce ammonia synthesis gas. (A) Hydrogenated (B) Liquefied (C) Gasified (D) Dehydrogenated

Description : Low grade coal is __________ to produce ammonia synthesis gas. (A) Hydrogenated (B) Liquefied (C) Gasified (D) Dehydrogenated

Last Answer : (C) Gasified

Fertiliser plants get their N2 requirements (A) By fractionation of liquefied air (B) By dissociating oxides of nitrogen (C) From coal gas (coke oven gas) (D) From producer gas

Description : Fertiliser plants get their N2 requirements (A) By fractionation of liquefied air (B) By dissociating oxides of nitrogen (C) From coal gas (coke oven gas) (D) From producer gas

Last Answer : (A) By fractionation of liquefied air

Which of the following is chiefly present in LPG (Liquefied Petroleum Gas) ? (1) Methane (2) Ethane (3) Propane (4) Butane

Description : Which of the following is chiefly present in LPG (Liquefied Petroleum Gas) ? (1) Methane (2) Ethane (3) Propane (4) Butane

Last Answer : Butane

Consider the following statements 1. Large cold storage plants use ammonia as refrigerant while domestic refrigerators use chlorofluorocarbons. 2. Ammonia can be liquefied at ambient temperatures and at low pressures. 3. Chlorofluorocarbons are air pollutants. The correct statement(s) is/are: (a) 1 and 3 only (b) 2 and 3 only (c) 1, 2 and 3 (d) 3 only

Description : Consider the following statements 1. Large cold storage plants use ammonia as refrigerant while domestic refrigerators use chlorofluorocarbons. 2. Ammonia can be liquefied at ambient temperatures and at low pressures. 3. Chlorofluorocarbons are ... 3 only (b) 2 and 3 only (c) 1, 2 and 3 (d) 3 only

Last Answer : Ans:(a)

L.P.G. is mostly liquefied (1) hydrogen (2) Oxygen (3) butane (4) methane

Description : L.P.G. is mostly liquefied (1) hydrogen (2) Oxygen (3) butane (4) methane

Last Answer : (3) butane Explanation: Liquefied petroleum gas or liquid petroleum gas (LPG) is mostly propane (C3H8), or butane (C4H10). They are most commonly mixtures of these two hydrocarbon gases that ... northern hemisphere winter, the mixes contain more propane, while in summer, they contain more butane.

Explain how can gases be liquefied?

Description : Explain how can gases be liquefied?

Last Answer : Ans. Gases can be liquefied by decrease of temperature and increase of pressure.

Name a liquefied metal which expands on solidification.

Description : Name a liquefied metal which expands on solidification.

Last Answer : Gallium (Ga) is a silvery white metal, liquid at room temp. It expands by 3.1% on solidifica-tion.

L.P.G. is mostly liquefied (1) hydrogen (2) oxygen (3) butane (4) methane

Description : L.P.G. is mostly liquefied (1) hydrogen (2) oxygen (3) butane (4) methane

Last Answer : butane

Motor starter or controller contacts may become welded together if the contacts _____________. A. open too quickly and arc B. close under excessive pressure C. open or close too quickly D. close under excessive starting current

Description : Motor starter or controller contacts may become welded together if the contacts _____________. A. open too quickly and arc B. close under excessive pressure C. open or close too quickly D. close under excessive starting current

Last Answer : Answer: D

The hammer blow in pipes occurs when (A) There is excessive leakage in the pipe (B) The pipe bursts under high pressure of fluid(C) The flow of fluid through the pipe is suddenly brought to rest by closing of the valve (D) The flow of fluid through the pipe is gradually brought to rest by closing of the valve

Description : The hammer blow in pipes occurs when (A) There is excessive leakage in the pipe (B) The pipe bursts under high pressure of fluid (C) The flow of fluid through the pipe is suddenly brought to ... valve (D) The flow of fluid through the pipe is gradually brought to rest by closing of the valve

Last Answer : Answer: Option C

8.Distinguish among soda water, milk and muddy water in a tabular form under the following heads : (i)Stability (ii)Filterability (iii)Type of mixture (iv) Tyndall effect -Chemistry

Description : 8.Distinguish among soda water, milk and muddy water in a tabular form under the following heads : (i)Stability (ii)Filterability (iii)Type of mixture (iv) Tyndall effect -Chemistry

Last Answer : Here is the answer ..Sorry for bad handwriting...Hope it helps....They contain different types of minerals To achieve different tastes, club soda, sparkling, and tonic water cont A) homogeneity: ... . ... The main difference between the two is that tonic water also contains quinine and sweeteners.

Excessive use of chemical fertilisers causes shrivelling of the roots and wilting of the plant, because the (A) Osmotic pressure of the soil water becomes less than that of the plant sap (B) Soil becomes too alkaline (C) Osmotic pressure of the soil water becomes higher than that of the plant sap (D) Soil becomes too acidic

Description : Excessive use of chemical fertilisers causes shrivelling of the roots and wilting of the plant, because the (A) Osmotic pressure of the soil water becomes less than that of the plant sap (B) Soil ... pressure of the soil water becomes higher than that of the plant sap (D) Soil becomes too acidic

Last Answer : (C) Osmotic pressure of the soil water becomes higher than that of the plant sa

In a rapid sand filter, air binding is caused due to excessive (A) Negative pressure (B) Pressure (C) Turbidity (D) Water pressure

Description : In a rapid sand filter, air binding is caused due to excessive  (A) Negative pressure  (B) Pressure  (C) Turbidity  (D) Water pressure

Last Answer : (A) Negative pressure

Due to which of the following factors the brush wear rate is altered ? (a) Speed of the machine (b) Contact pressure (c) Surface conditions of brush and commutator (d) Excessive sparking (e) All of the above

Description : Due to which of the following factors the brush wear rate is altered ? (a) Speed of the machine (b) Contact pressure (c) Surface conditions of brush and commutator (d) Excessive sparking (e) All of the above

Last Answer : Ans: E

Division of labour is the result of - (1) Complicated work (2) excessive pressure (3) excess supply of labour (4) specialization

Description : Division of labour is the result of - (1) Complicated work (2) excessive pressure (3) excess supply of labour (4) specialization

Last Answer : (4) specialisation Explanation: Division of Labor is the "specialization" of cooperative labor in specific, circumscribed tasks and like roles. It is a process whereby the production process is broken down into a sequence of stages and workers are assigned to particular stages.

Blood pressure may be increased by the excessive secretion of (1) Thyroxine (2) Testosterone (3) Estradiol (4) Estrol

Description : Blood pressure may be increased by the excessive secretion of (1) Thyroxine (2) Testosterone (3) Estradiol (4) Estrol

Last Answer : (1) Thyroxine Explanation: With its excess secretion, also known as hyper secretion, thyroxin (T4) causes an increased heart rate, high blood pressure, possible palpitations, and could lead to heart failure. It is related to hyperthyroidism.

A loud buzzing noise at the contacts of a magnetic controller could indicate _____________. A. weak contact spring pressure B. misalignment of the magnet faces C. excessive line current D. mechanical binding

Description : A loud buzzing noise at the contacts of a magnetic controller could indicate _____________. A. weak contact spring pressure B. misalignment of the magnet faces C. excessive line current D. mechanical binding

Last Answer : Answer: B

The pitting of controller contacts can be caused by _____________. A. excessive spring pressure B. insufficient contact pressure C. continuous motor overload D. all of the above

Description : The pitting of controller contacts can be caused by _____________. A. excessive spring pressure B. insufficient contact pressure C. continuous motor overload D. all of the above

Last Answer : Answer: B

Magnetic controller contacts may become welded together during operation because of _____________. A. excessive magnetic gap B. low contact pressure C. an open coil D. excessive ambient temperature

Description : Magnetic controller contacts may become welded together during operation because of _____________. A. excessive magnetic gap B. low contact pressure C. an open coil D. excessive ambient temperature

Last Answer : Answer: B

Magnetic controller contacts may become welded together during operation due to _____________. A. an open coil B. low contact pressure C. excessive ambient temperature D. excessive magnetic gap

Description : Magnetic controller contacts may become welded together during operation due to _____________. A. an open coil B. low contact pressure C. excessive ambient temperature D. excessive magnetic gap

Last Answer : Answer: B

If unprepared, what strategic pressures are recognized as key factors that can weaken the Organization ? A. Competitive and Environmental pressure B. Control at the expense of flexibility C. Lack of Planners D. Competitive & Environmental pressures and excessive control

Description : If unprepared, what strategic pressures are recognized as key factors that can weaken the Organization ? A. Competitive and Environmental pressure B. Control at the expense of flexibility C. Lack of Planners D. Competitive & Environmental pressures and excessive control

Last Answer : Competitive & Environmental pressures and excessive control

Prime coking coal is always blended with medium or non- coking coal before carbonisation (A) To check against its excessive swelling during heating, which may exert high pressure and damage coke oven walls (B) Because, it alone produces unreactive coke (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Prime coking coal is always blended with medium or non- coking coal before carbonisation (A) To check against its excessive swelling during heating, which may exert high pressure and damage coke oven walls (B) Because, it alone produces unreactive coke (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

Purpose of relief valve in a reciprocating pump is to (A) Protect the pump against developing excessive pressure (B) Facilitate unidirectional flow of liquid (C) Reduce the discharge pressure (D) Control the rate of discharge

Description : Purpose of relief valve in a reciprocating pump is to (A) Protect the pump against developing excessive pressure (B) Facilitate unidirectional flow of liquid (C) Reduce the discharge pressure (D) Control the rate of discharge

Last Answer : (A) Protect the pump against developing excessive pressure

Which of the following terms refers most precisely to a localized skin infection of a single hair follicle? a) Furuncle Furuncles occur anywhere on the body, but are most prevalent in areas subjected to irritation, pressure friction, and excessive perspiration, such as the back of the neck, the axillae, or the buttocks.

Description : Which of the following terms refers most precisely to a localized skin infection of a single hair follicle? a) Furuncle Furuncles occur anywhere on the body, but are most prevalent in areas ... Comedone. Comedones are the primary lesions of acne, caused by sebum blockage in the hair follicle.

Last Answer : a) Furuncle Furuncles occur anywhere on the body, but are most prevalent in areas subjected to irritation, pressure friction, and excessive perspiration, such as the back of the neck, the axillae, or the buttocks.

Rocks formed due to alteration of original structure due to heat and excessive pressure are called (A) Sedimentary rocks (B) Igneous rocks (C) Metamorphic rocks (D) None of these

Description : Rocks formed due to alteration of original structure due to heat and excessive pressure are called (A) Sedimentary rocks (B) Igneous rocks (C) Metamorphic rocks (D) None of these

Last Answer : Answer: Option C

Which of the following needs to be incorporated to prevent the low pressure turbine exhaust wetness from being excessive? a) Double regeneration b) Double carbonization c) Double reheat d) Double cooling

Description : Which of the following needs to be incorporated to prevent the low pressure turbine exhaust wetness from being excessive? a) Double regeneration b) Double carbonization c) Double reheat d) Double cooling

Last Answer : c) Double reheat

These bends are caused by excessive pressure and tension and generally occur while fiber are bent during handling or installation. ∙ A. microbending ∙ B. macrobending ∙ C. constant-radius bending ∙ D. kinks

Description : These bends are caused by excessive pressure and tension and generally occur while fiber are bent during handling or installation. ∙ A. microbending ∙ B. macrobending ∙ C. constant-radius bending ∙ D. kinks

Last Answer : C. constant-radius bending