# The horizontal intercept of dc load line is the same as ideal

The horizontal intercept of dc load line is the same as ideal cut off point.

## Related questions

Description : If the intercept on a vertical staff is observed as 0.75 m from a tachometer, the horizontal distance between tachometer and staff (A) 7.5 m (B) 25 m (C) 50 m (D) 75 m

Last Answer : (D) 75 m

Description : Pick out the wrong statement. (A) A particular chemical reaction is more temperature sensitive at low temperatures (B) A very high value of equilibrium constant, K (K >> 1) indicates that the ... ) Non-ideal flow takes place in reactors due to recycling, channeling or by creation of stagnant regions

Last Answer : (C) The intercept of the Arrhenius plot is called the 'activation energy

Description : What is the equation of the line having the y-intercept –1 and parallel to the line y = 5x – 7 ? -Maths 9th

Last Answer : Slope of AB = \(rac{2-4}{1-0}\) = -2, Slope of BC = \(rac{3-2}{3-1}\) = \(rac{1}{2}\)Slope of AC = \(rac{3-4}{3-0}\) = \(-rac{1}{3}\)Slope of AB × Slope of BC = -2 x \(rac{1}{2}\) = -1∴ AB ⊥ BC, i.e, ∠B = 90º ⇒ ΔABC is a right angled.

Description : What is the equation of the straight line which passes through (3, 4) and the sum of whose x-intercept and y-intercept is 14 ? -Maths 9th

Last Answer : (a) 4x + 3y = 24 Let the x-intercept = a. Then, y-intercept = 14 - a ∴ Eqn of the straight line is \(rac{x}{a}\) + \(rac{y}{14-a}\) = 1Since it passes through (3, 4), so\(rac{3}{a}\) + \(rac{4}{14-a}\) = 1⇒ 3(14 - ... = 1 ⇒ x + y = 7or \(rac{x}{6}\) + \(rac{y}{8}\) = 1 ⇒ 8x + 6y = 48 ⇒ 4x + 3y = 24.

Description : What is the equation of a line that has a slope of 1/2 and goes through the point (8,8) Write your answer in slope-intercept form?

Description : Which of the following equations of a line is in slope-intercept form?

Last Answer : y= 2x -6

Description : What is The equation of a line in slope-intercept form for a line with slope = 2 and y-intercept at (0,3)?

Description : When a graph is plotted between log x/m and log p, it is straight line with an angle `45^(@)` and intercept 0.3010 on y - axis. If initial pressure is

Last Answer : When a graph is plotted between log x/m and log p, it is straight line with an angle `45 ... adsorbent : (Report your answer after multiplying by 10)

Description : If the Slope of a line is 6.4 and the y intercept is.5?

Last Answer : Then the straight line equation is y = 6.4x+.5 whereas 6.4 isthe slope and .5 is the y intercept

Description : What slope-intercept equation for a line the coefficient of the -term gives the slope?

Last Answer : The "slope-intercept" form of a line is an equation of theform:y = mx + bThe "m" term - the coefficient you are asking for - is the slopeof the line. The "b" is the y-intercept.

Description : What slope-intercept equation for a line the coefficient of the -term gives the slope?

Last Answer : The "slope-intercept" form of a line is an equation of theform:y = mx + bThe "m" term - the coefficient you are asking for - is the slopeof the line. The "b" is the y-intercept.

Description : What is the equation in slope intercept form of the line that has a slope of 2 and contains the point 1 1?

Last Answer : In slope-point form a line with slope m through point (X, Y) has equation: y - Y = m(x - X) â†’ y = mx + Y - mX â†’ y = mx + c where: m is the slope c = Y - mx is the intercept â†’ The line with slope 2 through the point (1, 1) has equation: y = 2x + 1 - 2Ã—1 â†’ y = 2x - 1

Description : Why equation of the line that passes through point (4,12) and has the y-intercept of -2?

Description : What is the y-intercept of the line given by the equation y= 3x + 4?

Description : Write the equation in slope-intercept form of the line that has a slope of 2 and y-intercept of -2.?

Description : Identify an equation in slope-intercept from for the line parallel to y=4x-9 that passes through (-5,3)?

Description : For water-ethanol system, the minimum reflux ratio (A) Is computed from the slope of the upper operating line that is tangent to the equilibrium curve (B) Is computed from the intercept of the operating line (C) Cannot be computed (D) Is the optimum reflux ratio

Last Answer : (A) Is computed from the slope of the upper operating line that is tangent to the equilibrium curve

Description : The intercept of a staff (A) Is maximum if the staff is held truly normal to the line of sight (B) Is minimum if the staff is held truly normal to the line of sight (C) Decreases if the staff is tilted away from normal (D) Increases if the staff is tilted towards normal

Last Answer : (B) Is minimum if the staff is held truly normal to the line of sight

Description : A dc shunt generator has a speed of 800 rpm when delivering 20 A to the load at the terminal voltage of 220V. If the same machine is run as a motor it takes a line current of 20A from 220V supply. The speed of ... . (B) more than 800 rpm. (C) less than 800 rpm. (D) both higher or lower than 800 rpm.

Last Answer : (C) less than 800 rpm.

Description : Can two non vertical parallel lines can have the same y-intercept?

Last Answer : No, they cannot - unless the two lines are effectively the sameline.

Description : The staff intercept will be  (A) Greater farther off the staff is held  (B) Smaller, farther off the staff is held  (C) Smaller, nearer the staff is held  (D) Same, wherever the staff is held

Last Answer : (B) Smaller, farther off the staff is held

Description : On moving the feed line (q-line) from saturated liquid feed (vertical position) to saturated vapor feed (horizontal feed), if the slope of both the operating lines are to be increased, then it will result in (A) Greater degree of separation with a fixed number of trays (B) Increased reboiler load

Last Answer : (C) Increased reflux ratio

Description : A cable with a uniformly distributed load per horizontal metre run will take the following shape (A) Straight line (B) Parabola (C) Hyperbola (D) Elliptical

Description : For any part of a beam subjected to uniformly distributed load, bending moment diagram is (a) Horizontal straight line (b) Vertical straight line (c) Line inclined to x-axis (d) Parabola

Description : For any part of a beam subjected to uniformly distributed load, Shear force diagram is (a) Horizontal straight line (b) Vertical straight line (c) Line inclined to x-axis (d) Parabola

Last Answer : (c) Line inclined to x-axis

Description : For any part of a beam between two concentrated load, Bending moment diagram is a (a) Horizontal straight line (b) Vertical straight line (c) Line inclined to x-axis (d) Parabola

Last Answer : (c) Line inclined to x-axis

Description : 7-For any part of the beam, between two concentrated load Shear force diagram is a (a) Horizontal straight line (b) Vertical straight line (c) Line inclined to x-axis (d) Parabola

Description : In a cantilever carrying a uniformly varying load starting from zero at the free end, the Bending moment diagram is (a) A horizontal line parallel to x-axis (b) A line inclined to x-axis (c) Follows a parabolic law (d) Follows a cubic law

Last Answer : (d) Follows a cubic law

Description : In a cantilever carrying a uniformly varying load starting from zero at the free end, the shear force diagram is (a) A horizontal line parallel to x-axis (b) A line inclined to x-axis (c) Follows a parabolic law (d) Follows a cubic law

Last Answer : (c) Follows a parabolic law

Description : State the need of biasing and describe the concept of DC load line

Last Answer : Need of Biasing for Transistor: The transistor should be biased in the active region if it is to be used for amplification and in saturation and cut off if it is used as a switch. 2. The Q ... The position of operating point on the load line is dependent on the application of the transistor.

Description :  Three different points are shown on a dc load line. The upper point represents the : -  a) minimum current gain b) quiescent point c) saturation point d) cutoff point

Last Answer :  Three different points are shown on a dc load line. The upper point represents the : -  saturation point

Description : An ideal horizontal transition curve is a (a) Parabola (b) Circle (c) Clothoid spiral (d) Hyperbola

Last Answer : (c) Clothoid spiral

Description : A horizontal load of 120 kg/mt is to be carried by a cable suspended between supports at same level and 60 mts apart. If the maximum permissible tension is 36,000 kg the required length of cable is a.63.3 mets b.62.5 mts c.60.8 mts d.107 dynes e.60.1 mts

Last Answer : e. 60.1 mts

Description : A single word which is versatile, it can be a letter, unknown to the problem, a variable, a target, a love, an intercept, and a type of chromosome. What am I? -Riddles

Description : rewrite the equation 4x + 4y = 20 in slope-intercept form. -General Knowledge

Last Answer : 4x + 4y = 20 written in slope-intercept form is y = -x + 5. 4x + 4y = 20 4y = -4x + 20 (4y = -4x + 20)/(4) y = -x + 5.

Description : What is the y intercept of the function?

Last Answer : If the function is in this form:y = mx + bThen b is the y-intercept. For example if the function is y = 2x + 4 then the y-intercept is 4.

Description : What is the y-intercept for the equation y=-11x-4?

Description : what- use the slopes and y- intercept of the lines to determine the number of solutions to the system?

Last Answer : which of these describes the type of system above

Description : Which of these describes the y-intercept?

Last Answer : the y- value of the point where the line crosses the y- axis

Description : What is the equation for 5 slope and 9 y intercept?

Last Answer : The equation is y = 5x + 9

Description : What is slope intercept form using m and amp b?

Last Answer : The equation of a straight line is y = mx+b whereas m is theslope and b is the y intercept

Description : What is the slope intercept of the equation 9x-4y7?

Last Answer : 9x-4y=7 in slope intercept form

Description : What is the x intercept when any equation has a y value of?

Last Answer : y must have a value of 0 at the x-intercept.

Description : Can you write a linear equation in the slope intercept form using the points (34) and (58)?

Last Answer : If you mean points of (3, 4) and (5, 8) then the slope is 2 andthe equation is y=2x-2

Description : When should you use slope intercept form?

Description : Why can a function have multiple x-intercepts but only one y-intercept?

Last Answer : It can, but only if the line drawn is a curve. ---------------------------------------------------------------------------------- The function is a polynomial of the form: y = f(x) = ... value, eg y = xÂ² has y = 4 for x = Â 2). Thus there will only be one y value for x = 0, ie only one y-intecept.

Description : In Lineweaver-Burk plot, the y-intercept represents (A) Vmax (B) Km (C) Km (D) 1/Km