The intercept of a staff (A) Is maximum if the staff is held truly normal to the line of sight (B) Is minimum if the staff is held truly normal to the line of sight (C) Decreases if the staff is tilted away from normal (D) Increases if the staff is tilted towards normal

The intercept of a staff
(A) Is maximum if the staff is held truly normal to the line of sight
(B) Is minimum if the staff is held truly normal to the line of sight
(C) Decreases if the staff is tilted away from normal
(D) Increases if the staff is tilted towards normal
by

1 Answer

Answer :

(B) Is minimum if the staff is held truly normal to the line of sight
by

Related questions

Tilt of the staff in stadia tacheometry increases the intercept if it is (A) Away from the telescope pointing down hill (B) Towards the telescope pointing up-hill (C) Away from the telescope pointing up-hill (D) None of these

Description : Tilt of the staff in stadia tacheometry increases the intercept if it is (A) Away from the telescope pointing down hill (B) Towards the telescope pointing up-hill (C) Away from the telescope pointing up-hill (D) None of these

Last Answer : (C) Away from the telescope pointing up-hill

The staff intercept will be (A) Greater farther off the staff is held (B) Smaller, farther off the staff is held (C) Smaller, nearer the staff is held (D) Same, wherever the staff is held

Description : The staff intercept will be  (A) Greater farther off the staff is held  (B) Smaller, farther off the staff is held  (C) Smaller, nearer the staff is held  (D) Same, wherever the staff is held 

Last Answer : (B) Smaller, farther off the staff is held 

If the intercept on a vertical staff is observed as 0.75 m from a tachometer, the horizontal distance between tachometer and staff (A) 7.5 m (B) 25 m (C) 50 m (D) 75 m

Description : If the intercept on a vertical staff is observed as 0.75 m from a tachometer, the horizontal distance between tachometer and staff (A) 7.5 m (B) 25 m (C) 50 m (D) 75 m

Last Answer : (D) 75 m

Resting face height in edentulous patients: A. Decreases when head is tilted back (the opposite is true B. Increases when lower denture is inserted C. Does not change over time

Description : Resting face height in edentulous patients: A. Decreases when head is tilted back (the opposite is true B. Increases when lower denture is inserted C. Does not change over time

Last Answer : B. Increases when lower denture is inserted

What is TRUE about vertical dimension: A. Does not change for the whole life B. Decreases when head is tilted back (is the opposite and if is tilted forward decreases, patient supine reduced, stress and pain also reduced) C. Increases when a lower denture is placed in mouth

Description : What is TRUE about vertical dimension:  A. Does not change for the whole life   B. Decreases when head is tilted back (is the opposite and if is tilted forward decreases, patient  supine reduced, stress and pain also reduced)  C. Increases when a lower denture is placed in mouth 

Last Answer : C. Increases when a lower denture is placed in mouth 

In tangential tacheometry, an ordinary level staff is used (A) Leaning towards the instrument for inclined sights upward (B) Leaning away from the instrument for inclined sights downwards (C) Vertical in all cases (D) None of these

Description : In tangential tacheometry, an ordinary level staff is used (A) Leaning towards the instrument for inclined sights upward (B) Leaning away from the instrument for inclined sights downwards (C) Vertical in all cases (D) None of these

Last Answer : (C) Vertical in all cases

A dumpy level was set up at the midpoint between two pegs A and B, 50 m apart and the staff readings at and were 1.22 and 1.06. With the level set up at , the readings at and were 1.55 and 1.37. The collimation error per 100 m length of sight is (A) 0.02 m inclined upwards (B) 0.04 m inclined downwards (C) 0.04 m inclined upward (D) None of these

Description : A dumpy level was set up at the midpoint between two pegs A and B, 50 m apart and the staff  readings at and were 1.22 and 1.06. With the level set up at , the readings at  and were 1.55 and ... upwards  (B) 0.04 m inclined downwards  (C) 0.04 m inclined upward  (D) None of these

Last Answer : (B) 0.04 m inclined downwards 

A back sight (A) Is always taken on a point of known elevation or can be computed (B) Is added to the known level to obtain the instrument height (C) Taken on an inverted staff is treated as negative (D) All the above

Description : A back sight  (A) Is always taken on a point of known elevation or can be computed  (B) Is added to the known level to obtain the instrument height  (C) Taken on an inverted staff is treated as negative  (D) All the above 

Last Answer : (D) All the above 

Keeping the instrument height as 1½ m, length of staff 4 m, the up gradient of the ground 1 in 10, the sight on the up slope must be less than (A) 25 cm (B) 20 m (C) 45 m (D) 10 m

Description : Keeping the instrument height as 1½ m, length of staff 4 m, the up gradient of the ground 1 in 10,  the sight on the up slope must be less than  (A) 25 cm  (B) 20 m  (C) 45 m  (D) 10 m

Last Answer : (C) 45 m 

Keeping the instrument height as 1.5 m, length of staff 4 m, the slope of the ground as 1 in 10, the sight on the down-slope, must be less than (A) 30 m (B) 25 m (C) 20 m (D) 15 m

Description : Keeping the instrument height as 1.5 m, length of staff 4 m, the slope of the ground as 1 in 10, the  sight on the down-slope, must be less than  (A) 30 m  (B) 25 m  (C) 20 m  (D) 15 m 

Last Answer : (B) 25 m 

The difference of level between a point below the plane of sight and one above, is the sum of two staff readings and an error would be produced equal to (A) The distance between the zero of gradient and the foot of the staff (B) Twice the distance between the zero of graduation and the foot of the staff (C) Thrice the distance between the zero of graduation and the foot of the staff (D) None of the above

Description : The difference of level between a point below the plane of sight and one above, is the sum of two staff readings and an error would be produced equal to (A) The distance between the zero of ... Thrice the distance between the zero of graduation and the foot of the staff (D) None of the above

Last Answer : (B) Twice the distance between the zero of graduation and the foot of the staff

During levelling if back sight is more than foresight (A) The forward staff is at lower point (B) The back staff is at lower point (C) The difference in level, cannot be ascertained (D) None of these

Description : During levelling if back sight is more than foresight (A) The forward staff is at lower point (B) The back staff is at lower point (C) The difference in level, cannot be ascertained (D) None of these

Last Answer : (B) The back staff is at lower point

Pick up the correct statement from the following: (A) The lines of sight while observing back sight and fore sight lie in the same horizontal plane (B) The staff readings are measurements made vertically downwards from a horizontal plane (C) The horizontal plane with reference to which staff readings are taken, coincides with the level surface through the telescope axis (D) All the above

Description : Pick up the correct statement from the following: (A) The lines of sight while observing back sight and fore sight lie in the same horizontal plane (B) The staff readings are measurements made ... readings are taken, coincides with the level surface through the telescope axis (D) All the above

Last Answer : (D) All the above

Pick up the correct statement from the following: (A) An observation or the resulting reading with the level on a levelling staff is called sight (B) A back sight is the first sight taken after setting up the instrument in any position (C) The first sight on each change point is a fore sight (D) All the above

Description : Pick up the correct statement from the following: (A) An observation or the resulting reading with the level on a levelling staff is called sight (B) A back sight is the first sight taken after setting up ... position (C) The first sight on each change point is a fore sight (D) All the above

Last Answer : (D) All the above

With increase in moisture content, the bulking of sand (A) Increases (B) Decreases (C) First increases to a certain maximum value and then decreases (D) First decreases to a certain minimum value and then increases

Description : With increase in moisture content, the bulking of sand (A) Increases (B) Decreases (C) First increases to a certain maximum value and then decreases (D) First decreases to a certain minimum value and then increases

Last Answer : Answer: Option C

While all rivers of Peninsular India flow into the Bay of Bengal, Narmada and Tapti flow into the Arabian Sea because these two rivers: (A) Follow the slope of these rift valleys (B) The general slope of the Indian peninsula is from east to west (C) The Indian peninsula north of the Satpura ranges, is tilted towards the west (D) The Indian peninsula south of the satpura ranges is tilted towards east

Description : While all rivers of Peninsular India flow into the Bay of Bengal, Narmada and Tapti flow into the Arabian Sea because these two rivers: (A) Follow the slope of these rift valleys (B) The ... is tilted towards the west (D) The Indian peninsula south of the satpura ranges is tilted towards east

Last Answer : Answer: A  In the Deccan region, most of the major river systems flowing generally in east direction fall into Bay of Bengal. The major east flowing rivers are Godavari, Krishna, Cauvery, Mahanadi, etc. Narmada and Tapti are major West flowing rivers

For water-ethanol system, the minimum reflux ratio (A) Is computed from the slope of the upper operating line that is tangent to the equilibrium curve (B) Is computed from the intercept of the operating line (C) Cannot be computed (D) Is the optimum reflux ratio

Description : For water-ethanol system, the minimum reflux ratio (A) Is computed from the slope of the upper operating line that is tangent to the equilibrium curve (B) Is computed from the intercept of the operating line (C) Cannot be computed (D) Is the optimum reflux ratio

Last Answer : (A) Is computed from the slope of the upper operating line that is tangent to the equilibrium curve

In tacheometrical observations, vertical staff holding is generally preferred to normal staffing, due to (A) Ease of reduction of observations (B) Facility of holding (C) Minimum effect of careless holding on the result (D) None of these

Description : In tacheometrical observations, vertical staff holding is generally preferred to normal staffing, due to (A) Ease of reduction of observations (B) Facility of holding (C) Minimum effect of careless holding on the result (D) None of these

Last Answer : (C) Minimum effect of careless holding on the result

Which one of the following statements is not correc t? (a) Parallax error is eliminated when there is no change in the staff reading when eye is moved up and down (b) The objective lens is to be focused towards a white or bright background for clear visibility of cross-hairs (c) Temporary adjustments of the dumpy level are to be performed at every set up (d) The eyepiece need not be adjusted after the first set up when the same surveyor is taking readings

Description : Which one of the following statements is not correc t? (a) Parallax error is eliminated when there is no change in the staff reading when eye is moved up and down (b) The objective lens is ... (d) The eyepiece need not be adjusted after the first set up when the same surveyor is taking readings

Last Answer : (b) The objective lens is to be focused towards a white or bright background for clear visibility of cross-hairs

One of the major disadvantages of the Matrix form of organization structure is that– (A) it does not pinpoint product profit responsibility (B) it is not oriented towards results (C) there is possibility of disunity of command (D) it generates rivalry between line and staff members

Description : One of the major disadvantages of the Matrix form of organization structure is that– (A) it does not pinpoint product profit responsibility (B) it is not oriented towards results (C) there is possibility of disunity of command (D) it generates rivalry between line and staff members

Last Answer : Answer: there is possibility of disunity of command

The rate of most enzyme catalysed reactions changes with pH. As the pH increases, this rate (A) reaches a minimum, then increases (B) reaches a maximum, then decreases (C) increases (D) decreases

Description : The rate of most enzyme catalysed reactions changes with pH. As the pH increases, this rate (A) reaches a minimum, then increases (B) reaches a maximum, then decreases (C) increases (D) decreases

Last Answer : Answer : B

In a battery ignition system, the intensity of spark is A. minimum at low engine speed B. minimum at low engine speed and increases with engine speed C. maximum al low engine speed and decreases with engine speed D. maximum at low engine speed

Description : In a battery ignition system, the intensity of spark is A. minimum at low engine speed B. minimum at low engine speed and increases with engine speed C. maximum al low engine speed and decreases with engine speed D. maximum at low engine speed

Last Answer : ANSWER : C

What happens when water is cooled from 8°C to 0°C? 1. Its volume decreases uniformly, becoming minimum at 0°C. 2. Its density increases uniformly, attaining maximum value at 0°C. 3. Its volume decreases up to 4°C and then increases 4. Its density increases up to 4°C and then decreases. Which of the above answers is/are correct? (a) Only 1 (b) Only 2 (c) 3 and 4 (d) 1 and 2

Description : What happens when water is cooled from 8°C to 0°C? 1. Its volume decreases uniformly, becoming minimum at 0°C. 2. Its density increases uniformly, attaining maximum value at 0°C. 3. Its volume decreases up to 4°C and then increases ... is/are correct? (a) Only 1 (b) Only 2 (c) 3 and 4 (d) 1 and 2

Last Answer : Ans:(c)

In an oil-lubricated journal bearing, coefficient of friction between the journal and the bearing. [IES-1995] (a) Remains constant at all speeds. (b) is minimum at zero speed and increases monotonically with increase in speed. (c) is maximum at zero speed and decreases monotonically with increase in speed. (d) becomes minimum at an optimum speed and then increases with further increase in speed.

Description : In an oil-lubricated journal bearing, coefficient of friction between the journal and the bearing. [IES-1995] (a) Remains constant at all speeds. (b) is minimum at zero speed and increases ... speed. (d) becomes minimum at an optimum speed and then increases with further increase in speed.

Last Answer : (d) becomes minimum at an optimum speed and then increases with further increase in speed.

When an exothermic reversible reaction is conducted adiabatically, the rate of reaction (A) Continuously increases (B) Continuously decreases (C) Passes through a maximum (D) Passes through a minimum

Description : When an exothermic reversible reaction is conducted adiabatically, the rate of reaction (A) Continuously increases (B) Continuously decreases (C) Passes through a maximum (D) Passes through a minimum

Last Answer : (C) Passes through a maximum

A level when set up 25 m from peg A and 50 m from peg B reads 2.847 on a staff held on A and 3.462 on a staff held on B, keeping bubble at its centre while reading. If the reduced levels of A and B are 283.665 m and 284.295 m respectively, the collimation error per 100 m is (A) 0.015 m (B) 0.030 m (C) 0.045 m (D) 0.060 m

Description : A level when set up 25 m from peg A and 50 m from peg B reads 2.847 on a staff held on A and 3.462 on a staff held on B, keeping bubble at its centre while reading. If the reduced levels of A and B are 283.665 m ... collimation error per 100 m is (A) 0.015 m (B) 0.030 m (C) 0.045 m (D) 0.060 m

Last Answer : (D) 0.060 m

R.L. of floor at a building is 74.4 m, staff reading on the floor is 1.625 and staff reading when it is held inverted with bottom touching the ceiling of a hall is 2.870; then the height of the ceiling above the floor is (a) 3.593 m (b) 3.953 m (c) 4.495 m (d) 4. 594 m

Description : R.L. of floor at a building is 74.4 m, staff reading on the floor is 1.625 and staff reading when it is held inverted with bottom touching the ceiling of a hall is 2.870; then the height of the ceiling above the floor is (a) 3.593 m (b) 3.953 m (c) 4.495 m (d) 4. 594 m

Last Answer : (c) 4.495 m

As the reflux ratio in a distillation column is increased from the minimum, the (A) Slope of the operating line in stripping section decreases (B) Number of plates decreases very slowly first and then more and more rapidly (C) Total cost first decreases and then increases (D) Liquid flow increases while the vapor flow decreases for a system

Description : As the reflux ratio in a distillation column is increased from the minimum, the (A) Slope of the operating line in stripping section decreases (B) Number of plates decreases very slowly first ... decreases and then increases (D) Liquid flow increases while the vapor flow decreases for a system

Last Answer : (C) Total cost first decreases and then increases

Pick out the correct statement. (A) The slope of the stripping line is always less than unity (B) For a given separation in a binary distillation column, with increase in reflux ratio (above the minimum reflux ratio), the fixed cost of the distillation column first increases and then decreases (C) In Ponchon-Savarit method of no. of theoretical plate determination, the stripping and rectifying operating lines are vertical at total reflux (D) Kremser-Brown-Souder's equation is used to calculate the efficiency of a plate tower

Description : Pick out the correct statement. (A) The slope of the stripping line is always less than unity (B) For a given separation in a binary distillation column, with increase in reflux ratio ( ... (D) Kremser-Brown-Souder's equation is used to calculate the efficiency of a plate tower

Last Answer : C) In Ponchon-Savarit method of no. of theoretical plate determination, the stripping and rectifying operating lines are vertical at total reflux

A sewer is laid from a manhole to a manhole , 250 m away along a gradient of 1 in 125. If the reduced level of the invert at is 205.75 m and the height of the boning rod is 3 m, the reduced level of the sight rail at , is (A) 208.75 m (B) 202.75 m (C) 206.75 m (D) 211.75 m

Description : A sewer is laid from a manhole to a manhole , 250 m away along a gradient of 1 in 125. If the  reduced level of the invert at is 205.75 m and the height of the boning rod is 3 m, the reduced  level of the sight rail at , is  (A) 208.75 m  (B) 202.75 m  (C) 206.75 m  (D) 211.75 m

Last Answer : (C) 206.75 m 

The absolute minimum sight distance required for stopping a vehicle moving with a speed of 80 kmph, is (A) 120 m (B) 200 m (C) 640 m (D) None of these

Description : The absolute minimum sight distance required for stopping a vehicle moving with a speed of 80 kmph, is (A) 120 m (B) 200 m (C) 640 m (D) None of these

Last Answer : Answer: Option A

If N is the algebraic difference of grades, S is the minimum sight distance in metres, the length (L) of a summit curve is (A) NS/4 (B) NS²/4 (C) N²S/4(D) (NS)²/4

Description : If N is the algebraic difference of grades, S is the minimum sight distance in metres, the length (L) of a summit curve is (A) NS/4 (B) NS²/4 (C) N²S/4 (D) (NS)²/4

Last Answer : Answer: Option B

If N is the net difference of grades, S is the minimum overtaken sight distance in metres, the length (L) of a summit curve, is (A) NS/4 (B) NS²/4 (C) NS²/4.8 (D) NS²/9.6

Description : If N is the net difference of grades, S is the minimum overtaken sight distance in metres, the length (L) of a summit curve, is (A) NS/4 (B) NS²/4 (C) NS²/4.8 (D) NS²/9.6

Last Answer : Answer: Option D

Length of vehicles does not affect (A) Extra widening (B) Minimum radius of turning (C) Passing sight distance (D) Width of shoulders

Description : Length of vehicles does not affect (A) Extra widening (B) Minimum radius of turning (C) Passing sight distance (D) Width of shoulders

Last Answer : Answer: Option D

As the ball falls towards the ground, its velocity A. increases B. decreases C. remains constant D. becomes zero

Description : As the ball falls towards the ground, its velocity A. increases B. decreases C. remains constant D. becomes zero

Last Answer :  increases

In a telescope the object glass of focal length 14 cm, is located at 20 cm from the diaphragm. The focussing lens is midway between them when a staff 16.50 m away is focussed. The focal length of the focussing lens, is (A) 5.24 cm (B) 6.24 cm (C) 7.24 cm (D) 8.24 cm

Description : In a telescope the object glass of focal length 14 cm, is located at 20 cm from the diaphragm. The focussing lens is midway between them when a staff 16.50 m away is focussed. The focal length of the focussing lens, is (A) 5.24 cm (B) 6.24 cm (C) 7.24 cm (D) 8.24 cm

Last Answer : (C) 7.24 cm

With the increase in the amount of compaction energy (A) Optimum water content increases but maximum dry density decreases (B) Optimum water content decreases but maximum dry density increases (C) Both optimum water content and maximum dry density increase (D) Both optimum water content and maximum dry density decrease

Description : With the increase in the amount of compaction energy (A) Optimum water content increases but maximum dry density decreases (B) Optimum water content decreases but maximum dry density increases ( ... and maximum dry density increase (D) Both optimum water content and maximum dry density decrease

Last Answer : Answer: Option B

Diagonal tension in a beam (A) Is maximum at neutral axis (B) Decreases below the neutral axis and increases above the neutral axis (C) Increases below the neutral axis and decreases above the neutral axis (D) Remains same

Description : Diagonal tension in a beam (A) Is maximum at neutral axis (B) Decreases below the neutral axis and increases above the neutral axis (C) Increases below the neutral axis and decreases above the neutral axis (D) Remains same

Last Answer : Answer: Option C

When the compaction energy increases the compaction of soils: (a) Both of OMC and maximum dry density decrease (b) Both of OMC and maximum dry density increase (c) OMC decreases but maximum dry density decrease (c) OMC increases but maximum dry density increase

Description : When the compaction energy increases the compaction of soils: (a) Both of OMC and maximum dry density decrease (b) Both of OMC and maximum dry density increase (c) OMC decreases but maximum dry density decrease (c) OMC increases but maximum dry density increase

Last Answer : (c) OMC decreases but maximum dry density decrease

Does the sense of sight usually affect your reaction towards something?

Description : Does the sense of sight usually affect your reaction towards something?

Last Answer : Well you use all your senses in order to interpet something but when one sense is taken away your others are hightened. I can’t say it will frighten me but it would make my other sense more aware of them in a different way instead of using sight as a mean to seeing something.

I start the day small and round. Buried alive without a frown. I am fed and nourished where I stay, slowly growing in a patient way. Finally I break through my dark brown cage. Reaching towards a puffy lane. But I will never be truly free, from the cage that always binds me What am I? -Riddles

Description : I start the day small and round. Buried alive without a frown. I am fed and nourished where I stay, slowly growing in a patient way. Finally I break through my dark brown cage. Reaching towards a puffy lane. But I will never be truly free, from the cage that always binds me What am I? -Riddles

Last Answer : A Seed.

The drain which is provided parallel to roadway to intercept and divert the water from hill slopes is known as (A) Sloping drain (B) Catch-water drain (C) Side drain (D) Cross drain

Description : The drain which is provided parallel to roadway to intercept and divert the water from hill slopes is known as (A) Sloping drain (B) Catch-water drain (C) Side drain (D) Cross drain

Last Answer : Answer: Option B

If L is the length of vehicles in metres, C is the clear distance between two consecutive vehicles (stopping sight distance), V is the speed of vehicles in km/hour, the maximum number N of vehicles/hour, is (A) N = 1000 V / (L + C) (B) N = (L + C) / 1000 V (C) N = 1000 L / (C + V) (D) N = 1000 C / (L + V)

Description : If L is the length of vehicles in metres, C is the clear distance between two consecutive vehicles (stopping sight distance), V is the speed of vehicles in km/hour, the maximum number N of vehicles/hour, is (A) N = 1000 V / (L + C ... ) / 1000 V (C) N = 1000 L / (C + V) (D) N = 1000 C / (L + V)

Last Answer : Answer: Option A

The maximum safe speed on roads, depends on the (A) Type of road surface (B) Type of curves (C) Sight distance (D) All the above

Description : The maximum safe speed on roads, depends on the (A) Type of road surface (B) Type of curves (C) Sight distance (D) All the above

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) At a particular speed of operation, the head produced decreases with the increase of discharge (B) At zero discharge, discharge valve remaining closed, the head developed is maximum which is known as shut-off head (C) At a particular speed the discharge at which efficiency of a pump is maximum, is known as normal discharge (D) All the above

Description : Pick up the correct statement from the following: (A) At a particular speed of operation, the head produced decreases with the increase of discharge (B) At zero discharge, discharge valve remaining closed ... which efficiency of a pump is maximum, is known as normal discharge (D) All the above

Last Answer : (D) All the above

What is the equation of the line having the y-intercept –1 and parallel to the line y = 5x – 7 ? -Maths 9th

Description : What is the equation of the line having the y-intercept –1 and parallel to the line y = 5x – 7 ? -Maths 9th

Last Answer : Slope of AB = \(rac{2-4}{1-0}\) = -2, Slope of BC = \(rac{3-2}{3-1}\) = \(rac{1}{2}\)Slope of AC = \(rac{3-4}{3-0}\) = \(-rac{1}{3}\)Slope of AB × Slope of BC = -2 x \(rac{1}{2}\) = -1∴ AB ⊥ BC, i.e, ∠B = 90º ⇒ ΔABC is a right angled.

What is the equation of the straight line which passes through (3, 4) and the sum of whose x-intercept and y-intercept is 14 ? -Maths 9th

Description : What is the equation of the straight line which passes through (3, 4) and the sum of whose x-intercept and y-intercept is 14 ? -Maths 9th

Last Answer : (a) 4x + 3y = 24 Let the x-intercept = a. Then, y-intercept = 14 - a ∴ Eqn of the straight line is \(rac{x}{a}\) + \(rac{y}{14-a}\) = 1Since it passes through (3, 4), so\(rac{3}{a}\) + \(rac{4}{14-a}\) = 1⇒ 3(14 - ... = 1 ⇒ x + y = 7or \(rac{x}{6}\) + \(rac{y}{8}\) = 1 ⇒ 8x + 6y = 48 ⇒ 4x + 3y = 24.

What is the equation of a line that has a slope of 1/2 and goes through the point (8,8) Write your answer in slope-intercept form?

Description : What is the equation of a line that has a slope of 1/2 and goes through the point (8,8) Write your answer in slope-intercept form?

Last Answer : The answer is:y = 1/2x + 4

Which of the following equations of a line is in slope-intercept form?

Description : Which of the following equations of a line is in slope-intercept form?

Last Answer : y= 2x -6

What is The equation of a line in slope-intercept form for a line with slope = 2 and y-intercept at (0,3)?

Description : What is The equation of a line in slope-intercept form for a line with slope = 2 and y-intercept at (0,3)?

Last Answer : -1