Pick out the wrong statement.
(A) Use of different catalysts in a reversible catalytic chemical reaction does
not change the equilibrium composition
(B) Alumina is added as a promoter to iron catalyst in ammonia synthesis
reaction
(C) Activation energy for a reaction is obtained from the intercept of the
Arrhenius plot
(D) Presence of inerts affects the equilibrium conversion of reactants in a
chemical reaction

1 Answer

Answer :

(C) Activation energy for a reaction is obtained from the intercept of the
Arrhenius plot

Related questions

Description : Pick out the wrong statement. (A) A particular chemical reaction is more temperature sensitive at low temperatures (B) A very high value of equilibrium constant, K (K >> 1) indicates that the ... ) Non-ideal flow takes place in reactors due to recycling, channeling or by creation of stagnant regions

Last Answer : (C) The intercept of the Arrhenius plot is called the 'activation energy

Description : For a heterogeneous catalytic reaction (A) Free energy of activation is lowered in the presence of catalyst, which remains unchanged at the end of reaction (B) A relatively small amount of catalyst ... with the reactant (D) The surface of the catalyst does not play an important role during reaction

Last Answer : (A) Free energy of activation is lowered in the presence of catalyst, which remains unchanged at the end of reaction

Description : Pick out the correct statement. (A) In catalytic reactions, the catalyst reacts with the reactants (B) A catalyst initiates a chemical reaction (C) A catalyst lowers the activation energy of ... molecules (D) A catalyst cannot be recovered chemically unchanged at the end of the chemical reaction

Last Answer : (C) A catalyst lowers the activation energy of the reacting molecules

Description : Pick out the wrong statement. (A) A catalyst does not alter the final position of equilibrium in a reversible reaction (B) A catalyst initiates a reaction (C) A catalyst is specific in reaction (D) A catalyst remains unchanged in chemical composition at the end the reaction

Last Answer : (B) A catalyst initiates a reaction

Description : Pick out the correct statement. (A) A catalyst does not change AH of the reaction (B) A catalyst changes the equilibrium point (C) Law of mass action was suggested by Le-Chatelier (D) The difference between the energy of reactants and that of the products is the activation energy

Last Answer : (A) A catalyst does not change AH of the reaction

Description : What happens when a catalyst is added to a system at equilibrium? A The reaction follows an alternative pathway of lower activation energy. B The heat of reaction decreases. C The potential ... decreases. D The potential energy of the products decreases. E The rate of chemical reaction decreases.

Last Answer : A The reaction follows an alternative pathway of lower activation energy.

Description : Which is a catalyst promoter used in catalytic ammonia synthesis reaction? (A) Al2O3 (B) Cr2O3 (C) K2O (D) MnO

Last Answer : (C) K2O

Description : Pick out the wrong statement. (A) Catalytic activity of enzyme catalysed reactions which is affected by temperature, pH value & chemical agents, is maximum at a temperature of about 45°C ... in enzyme catalysed reactions can be calculated by using the thermodynamic properties of substrates & prod

Last Answer : (C) Enzymes help in increasing the activation energy of the reaction

Description : Which one of the following statements regarding a catalyst is not correct? A An enzyme is a catalyst that only binds certain substrates. B An enzyme is a protein that is a highly ... increasing the activation energy. D Catalysts do not alter the equilibrium constant for a chemical reaction.

Last Answer : C Catalysts increase the rate of a reaction by altering the mechanism, thereby increasing the activation energy.

Description : Use of catalyst is a must in the ammonia manufacture, because the reaction is reversible as well as the heat of dissociation of N2 & H2 is high. The presence of promoter along with the catalyst helps in ... B) Increasing the effectiveness (C) Improving the strength & heat resistance (D) All a, b & c

Last Answer : (D) All a, b & c

Description : Catalytic action in a catalytic chemical reaction follows from the ability of catalyst to change the (A) Activation energy (B) Equilibrium constant (C) Heat of reaction (D) None of these

Last Answer : (A) Activation energy

Description : Pick out the wrong statement. (A) Exit age description function (E) and internal age distribution function (I) are related as, E = -(dI/dθ) (B) Chemisorption studies are useful in the ... energy (D) A catalyst increases the potential energy barrier over which the reactants must pass to form products

Last Answer : (D) A catalyst increases the potential energy barrier over which the reactants must pass to form products

Description : Pick out the wrong statement. (A) Lower boiling paraffins have higher octane number than higher paraffins (B) Dehydrogenation of naphthenes to aromatics is a desirable reaction in reforming ... is dearomatised kerosene (D) Catalyst used in catalytic reforming is platinum on silica-alumina base

Last Answer : (C) The most ideal feedstock for thermal reforming is dearomatised kerosene

Description : The equilibrium constant for the reversible reaction as shown in the bellow figure, is affected by the (A) Temperature of the system (B) Presence or absence of inerts (C) Pressure of the system (D) Kinetics of the reaction

Last Answer : (C) Pressure of the system

Description : Pick out the wrong statement. (A) Wine, rum & Vodka are prepared by the formulation of fruit juice, sugar beet & rye respectively (B) Protein catalysts are called enzymes (C) The rate ... concentration of reactants at high concentration of enzymes (D) Total sugar content in molasses is about 10%

Last Answer : (D) Total sugar content in molasses is about 10%

Description : Promoter (A) Initiates a chemical reaction and is a catalyst by itself (B) Alters the position of equilibrium in a reversible reaction (C) Increases the number of active centres by increasing the unevenness of catalyst surface and by creating discontinuities in the crystals (D) All (A), (B) and (C)

Last Answer : (C) Increases the number of active centres by increasing the unevenness of catalyst surface and by creating discontinuities in the crystals

Description : Pick out the wrong statement. (A) 'Hold back' is defined as the fraction of material that stays longer than the mean residence time (B) Study of non-ideal flow reactor is done experimentally ... final stages of reaction (D) A batch reactor cannot be used to study the kinetics of catalytic reaction

Last Answer : (D) A batch reactor cannot be used to study the kinetics of catalytic reaction

Description : During nitric acid manufacture, catalytic oxidation of ammonia at 800°C in presence of platinum catalyst produces nitrogen oxide. Conversion of NH3 to NO is about __________ percent. (A) 38 (B) 68 (C) 82 (D) 98

Last Answer : (D) 98

Description : Pick out the wrong statement. (A) Alkylation produces a larger iso-paraffin (having higher octane number) from the reaction of an olefin with smaller iso-paraffin (B) Catalytic alkylation processes use HF ... (> 1000°C) (D) Gasoline having an octane number of 90 can be produced by alkylation process

Last Answer : (C) All the alkylation processes use very high temperature (> 1000°C)

Description : The equilibrium constant of a catalytic chemical reaction __________ due to the presence of a catalyst. (A) Increases (B) Decreases (C) Remain unaffected (D) Unpredictable from the data

Last Answer : (C) Remain unaffected

Description : A catalyst (A) Initiates a reaction (B) Lowers the activation energy of reacting molecules (C) Is capable of reacting with any one of the reactants (D) Cannot be recovered chemically unchanged at the end of a chemical reaction

Last Answer : (C) Is capable of reacting with any one of the reactants

Description : The role of a catalyst in a chemical reaction is to change the (A) Equilibrium constant (B) Activation energy (C) Final products (D) Heat of reaction

Last Answer : (B) Activation energy

Description : Pick out the correct statement. (A) A catalyst speeds up the forward reaction but slows shown the reverse reaction (B) Addition of catalyst changes the equilibrium constant (C) Pressure changes do not change the equilibrium concentrations (D) The composition of equilibrium is changed by catalyst

Last Answer : (C) Pressure changes do not change the equilibrium concentrations

Description : Pick out the wrong statement. (A) Visible radiation provides the necessary activation energy in photochemical reactions (B) The order and molecularity of a complex reaction may not be the same (C) For ... rate constant (k) (D) Molecularity of the reaction is always a whole number greater than zero

Last Answer : (B) The order and molecularity of a complex reaction may not be the same

Description : Catalyst used in ammonia synthesis uses __________ as a promoter. (A) Pt (B) K2O (C) Al2O3 (D) Ni

Last Answer : (B) K2O

Description : In a reversible chemical reaction having two reactants in equilibrium, if the concentration of the reactants are doubled, then the equilibrium constant will (A) Remain the same (B) Be halved (C) Also be doubled (D) Become one fourth

Last Answer : (A) Remain the same

Description : In a reversible chemical reaction (where, Δx = number of moles of products-number of moles of reactants) (A) Addition of inert gas favours the forward reaction, when Δx is positive (B) Pressure has no effect on equilibrium, when Δn = ... any value of Δx (+ ve, - ve) or zero) (D) All 'a', 'b' & 'c'

Last Answer : D) All 'a', 'b' & 'c'

Description : The catalyst in a first order chemical reaction changes the (A) Equilibrium constant (B) Activation energy (C) Heat of formation of the product (D) Heat of reaction

Last Answer : (B) Activation energy

Description : In autocatalytic reactions, (A) One of the reactants acts as a catalyst (B) One of the products acts as a catalyst (C) Catalysts have very high selectivity (D) No catalyst is used

Last Answer : (B) One of the products acts as a catalyst

Description : Catalyst used in catalytic reforming is (A) Platinum on alumina (B) Nickel (C) Iron (D) Aluminium chloride

Last Answer : (A) Platinum on alumina

Description : Catalyst used in the 'catalytic converter' employed in automobile exhaust line for complete combustion/oxidation of carbon monoxide, nitrogen oxides and hydrocarbons is (A) Alumina (B) Platinum (C) Vanadium pentoxide (D) Iron oxide

Last Answer : Option B

Description : Pick out the correct statement. (A) Reactions with high activation energies are very temperature sensitive (B) Chemical equilibrium is a static state (C) A photochemical reaction is catalysed by ... occurs when the energy of the reacting molecule is less than the activation energy of the reaction

Last Answer : (A) Reactions with high activation energies are very temperature sensitive (B) Chemical equilibrium is a static state

Description : Higher free energy of activation of a chemical reaction (at a given temperature) implies (A) Slower rate of reaction (B) Higher rate of reaction (C) Higher equilibrium conversion (D) Both (B) and (C)

Last Answer : (A) Slower rate of reaction

Description : Pick out the correct statement pertaining to catalytic cracking. (A) With increase in the reactor pressure, octane number of gasoline decreases (B) With increase in the reactor temperature, gasoline yield decreases for a given ... with increase in the catalyst to oil ratio (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Description : Catalyst is a substance, which __________ chemical reaction. (A) Increases the speed of a (B) Decreases the speed of a (C) Can either increase or decrease the speed of a (D) Alters the value of equilibrium constant in a reversible

Last Answer : (C) Can either increase or decrease the speed of a

Description : In ammonia synthesis (N2 + 3H2 = 2NH3 ), there is a decrease in total volume, hence to get high equilibrium conversion, the reaction should becarried out at (A) Low pressure (B) High pressure (C) Very high temperature (D) Atmospheric pressure; as the pressure has no effect on conversion

Last Answer : (B) High pressure

Description : The rate expression for a heterogeneous catalytic reaction is given by, - rA = K.KA PA(1 + KA.PA + KR.PR), where K is surface reaction rate constant and KA and KR are absorption equilibrium constants of A and R respectively. If KR PR ... R and A) (A) E (B) E + ΔHA (C) E + ΔHA - ΔHR ) (D) ΔHA + ΔHR

Last Answer : (C) E + ΔHA - ΔHR )

Description : Though kinetics of ammonia synthesis dictates the use of low temperature for high equilibrium conversion, yet it is kept moderately high (550°C), because at low temperature (A) Rate of reaction is very low ... (C) Space velocity of gas is very low resulting in decreased conversion (D) None of these

Last Answer : (A) Rate of reaction is very low

Description : Pick out the correct statement. (A) A lower temperature favours the reaction of lower activation energy (B) The dispersion number for a reactor/vessel is uL/D (C) The rate controlling step in ... step (D) Pore volume and porosity of a catalyst is measured by Brunauer￾Emmett-Teller (BET) technique

Last Answer : (A) A lower temperature favours the reaction of lower activation energy

Description : (4) None of these Explanation: Catalysis is the change in rate of a chemical reaction due to the participation of a substance called a catalyst. Unlike other reagents that ... may participate in multiple chemical transformations. Catalysts that speed the reaction are called positive catalysts.

Last Answer : Table salt gets moist during rainy season because – (1) sodium chloride is hygroscopic (2) sodium chloride is deliquescent (3) sodium chloride contains some quantity of sodium iodide (4) sodium chloride contains hygroscopic impurities like magnesium chloride

Description : Pick out the wrong statement. (A) In a batch reactor, which is exclusively used for liquid phase reactions; temperature pressure and composition may vary with time (B) In a semi-batch reactor, ... system (D) In a continuous flow reactor, both the reactants and the products flow out continuously

Last Answer : (C) In a continuous flow reactor, uniform concentration cannot be maintained throughout the vessel even in a well agitated system

Description : Pick out the wrong statement. (A) In a multistep reaction, the slowest step is the rate determining step (B) In general, the rate of a reaction becomes triple for every 10°C rise in temperature (C ... energy (D) Molecularity of a reaction cannot be zero but the order of a reaction can be zero

Last Answer : (B) In general, the rate of a reaction becomes triple for every 10°C rise in temperature

Description : Pick out the wrong statement: (A) Chemical reactions with high activation energy are very temperature sensitive (B) A flat velocity profile exists in a plug flow reactor (C) The residence ... D) Half life of a reaction increases with increased initial concentration for reaction orders more than one

Last Answer : (C) The residence time for all the elements of fluid in case of a P.F.R. need not be same

Description : Pick out the wrong statement. (A) The integral method of analysing kinetic data is used when the data is scattered (B) The differential method of analysing kinetic data requires more accurate ... less than one for identical feed composition, flow rate, conversion and for all positive reaction orders

Last Answer : (C) When the reaction rate is independent of temperature, the reaction is said to be of zero order

Description : The excess energy of reactants in a chemical reaction required to dissociate into products is termed as the __________ energy. (A) Activation (B) Potential (C) Binding (D) Threshold

Last Answer : (A) Activation

Description : If the rate of a chemical reaction becomes slower at a given temperature, then the (A) Initial concentration of the reactants remains constant (B) Free energy of activation is lower (C) Entropy changes (D) Free energy of activation is higher

Last Answer : (D) Free energy of activation is higher

Description : The catalytic power of enzymes is due to (a) the presence of amino acids in their structures (b) their high molecular weight (c) their ability to lower the activation energy of the reaction (d) their limited solubility in water and other solvents

Last Answer : Ans:(c)

Description : Pick out the wrong statement. (A) Catalytic hydrogenation of carbon monoxide produces methyl alcohol (B) In nylon-6, the number 6 represents the total number of carbon atoms in the ring (C ... are benzene and chlorine (D) Ethanolamines are produced by using ammonia and ethylene oxide as raw material

Last Answer : (C) Raw materials for DDT manufacture are benzene and chlorine

Description : Oxidation of ortho-xylene in presence of __________ catalyst is done to produce phthalic anhydride on commercial scale. (A) Nickel (B) Vanadium (C) Alumina (D) Iron

Last Answer : (B) Vanadium

Description : . Which of the following is used as a catalyst in fluidised bed catalytic cracking? (A) Silica-magnesia (B) Silica-alumina (C) Bentonite clays (D) All (A), (B) and (C

Last Answer : (D) All (A), (B) and (C