What is meant by constant current source ? What is a constant current source ?

What is meant by constant current source ? What is a constant current source ?
by

1 Answer

Answer :

A voltage source whose internal impedance is much higher than that of external load impedance is called a constant current source.
by

Related questions

What is the current source of Karshof ?

Description : What is the current source of Karshof ?

Last Answer : Karshoff's current formula: The algebraic sum of the combined currents at any point in a circuit is equal. Or the incoming current and the outgoing current are equal at any point in a circuit.

What is the current source of Ohm ?

Description : What is the current source of Ohm ?

Last Answer : : The current flowing through a conductor at a fine temperature is proportional to the voltage of the conductor. I = where , I = current , V = voltage R = resistance

What is meant by transformer ratio ?

Description : What is meant by transformer ratio ?

Last Answer : The relationship between the voltage, the number of punches and the current in the primary and secondary coils of a transformer is called the transformer ratio of the transformer. It can be ... Current Notice the image below. Hopefully it will be helpful to understand the transformation ratio.

What is meant by Voltmeter & Ammeter ?

Description : What is meant by Voltmeter & Ammeter ?

Last Answer : Voltmeter measures the voltage of any load or any line and the voltmeter has to be connected parallel to the load. The ammeter measures the current flowing through a load or the current of an electrical line. The ammeter is connected in series with the load.

What is meant by "integrated circuit" and "open circuit" ?

Description : What is meant by "integrated circuit" and "open circuit" ?

Last Answer : Answer : Integrated circuit refers to a complete electrical path through which electric current can flow through a horizontal electric field.

What is meant by digital electronics ?

Description : What is meant by digital electronics ?

Last Answer : A signal or symbol that has two defined layers , no unknown state, and whose layers change step by step over time and have specific steps , is called digital electronics.

What is meant by Logic Level of Digital Signal ?

Description : What is meant by Logic Level of Digital Signal ?

Last Answer : The voltage used to indicate binary '1' and '0' is called logic level.

What is meant by pulse rate or frequency of digital signal ?

Description : What is meant by pulse rate or frequency of digital signal ?

Last Answer : The number of vibrations per second in a signal is called Pulse rate .

What is meant by Digital Cycle Duty Cycle ?

Description : What is meant by Digital Cycle Duty Cycle ?

Last Answer : Duty Cycle = Vibration / Period X 100% . For example , if tw = T / 2 , Duty cycle = 50% .

What is meant by static properties ?

Description : What is meant by static properties ?

Last Answer : : When the voltages applied to different electrodes of the triode are insufficient or DC and no load resistance is included in the plate circuit and there is no signal at the input , it is called.

What is a short circuit ? What is meant by short circuit ?

Description : What is a short circuit ? What is meant by short circuit ?

Last Answer : : A short circuit is an electromotive circuit that involuntarily causes abnormal current to flow through the connecting wire. In this case electricity has to overcome very little resistance. As a ... sparks of electricity are created. And if an animal touches this circuit, it gets electrocuted.

What is meant by thermal rave ? What is a thermal runway ?

Description : What is meant by thermal rave ? What is a thermal runway ?

Last Answer : Such a phenomenon of automatic destruction of a transistor in a temporary state is called thermal runway.

What is Voltage Source ?

Description : What is Voltage Source ?

Last Answer : It is a source through which a certain amount of voltage is obtained through its endpoints without relying on the value of load resistance. Usually the internal resistance of the voltage source is apporoximately zero.

What is voltage source ?

Description : What is voltage source ?

Last Answer : The source through which a certain amount of voltage or energy is always supplied to the load is called the voltage source.

What is the source of voltage of Karshof ?

Description : What is the source of voltage of Karshof ?

Last Answer : : Karshoff's voltage formula: The algebraic sum of all emfs and all voltage drops in a closed electrical network is zero.

What is the source of Ohm's resistance ?

Description : What is the source of Ohm's resistance ?

Last Answer : : Current flowing through a conductor at a constant temperature is proportional to the voltage across the two ends of the conductor. Or the current flowing through a conductor at a constant ... to the voltage difference between the two ends of that conductor and disproportionate to the resistance.

What is Time Constant ?

Description : What is Time Constant ?

Last Answer : The time required for a circuit to lose 36.6% of the fully charged value of a circuit is called time constant.

What is a tube constant ?

Description : What is a tube constant ?

Last Answer : When designing a vacuum tube, various factors such as the size of the electrode, the space between the electrodes, etc. must be taken into consideration while determining the behavior of the tube in the circuit . These design factors are summarized in sequential numbers , called tube constants.

What is short circuit current ?

Description : What is short circuit current ?

Last Answer : Answer : A fault in an electrical system whose current, before or after the current flows through the load, is combined with one or more phases of neutral current which causes more current to flow than normal. The current is called short circuit current.

What is a current limiting reactor ? How many types and what are they ?

Description : What is a current limiting reactor ? How many types and what are they ?

Last Answer : Answer : A current limiting reactor is basically an inductive coil which limits the short circuit current by providing inductive reactance when required. Types: 1. Based on the structure- a) Dry type ... reactor. Basbar reactors are again of 2 types- a) Ring system reactor b) Tiber system reactor

What is the method of diagnosing short circuit current ?

Description : What is the method of diagnosing short circuit current ?

Last Answer : There are three methods for determining short circuit current , namely- 1) Ohmic method 2) Per unit method 3.) Percentage reactance method.

How to reduce eddy current loss ?

Description : How to reduce eddy current loss ?

Last Answer : Answer : If you want to reduce the current loss, you must make the laminations of the core as thin as possible. And if the laminations can be well laminated or insulated then the eddy current loss can be greatly reduced.

What is Eddie Current Loss ?

Description : What is Eddie Current Loss ?

Last Answer : The iron loss of the transformer depends on the maximum flux density and the supply frequency. Since the transformer is always fixed i.e. fixed frequency and supply and fixed then here core and ... here is considered as constant or unchanged loss. And this is basically known as Eddie Current Loss.

What is the no-load current of transformer ?

Description : What is the no-load current of transformer ?

Last Answer : The small amount of current flowing in the primary winding in the no-load condition of the transformer is called no-load current.

What is the value of voltage and current of transformer ?

Description : What is the value of voltage and current of transformer ?

Last Answer : The value of voltage and current of the transformer depends on the number of patches of wires in the transformer.

What is quadratic current ?

Description : What is quadratic current ?

Last Answer : The vertical component of the current in an inductive or capacitive circuit which is at an angle of 90 সাথে with the voltage is called quadraturer or reactive current. Dear Reader, These were the important questions and answers of Circuit 1 today. Stay with us to get more such questions and answers.

Why is the current behind the voltage in the RLC circuit ?

Description : Why is the current behind the voltage in the RLC circuit ?

Last Answer : Inductance prevents any change in current or flux. So the current stays behind the voltage.

What are the types of electric current ?

Description : What are the types of electric current ?

Last Answer : There are two types of electric current , for example , ( a) direct current . And (b) alternating current .

What is current ?

Description : What is current ?

Last Answer : Answer : The rate at which free electrons located in a substance flow in a certain direction is called current .

Does being thick increase or decrease the current carrying capacity ?

Description : Does being thick increase or decrease the current carrying capacity ?

Last Answer : : The thicker it is, the greater the current carrying capacity.

What is required to generate current ?

Description : What is required to generate current ?

Last Answer : Power generation or power generation or power generation or power generation is the production of power from any other primary energy source. The first basic theory of power generation was ... . Other sources used to generate electricity include solar energy and thermal energy stored underground.

How many units and what are the current levels ?

Description : How many units and what are the current levels ?

Last Answer : There are many common units of current measurement. 1. CGS power unit 2. CGS electromagnetic unit 3. Practical unit 4. International unit.

What is Alternating Current ?

Description : What is Alternating Current ?

Last Answer : An alternating current is a current that changes direction as it flows, and its value changes every moment.

What is the practical unit of current ?

Description : What is the practical unit of current ?

Last Answer : The practical unit of current is ampere ( Amp).

What is the international unit of current measurement ?

Description : What is the international unit of current measurement ?

Last Answer : The international unit of current measurement is Ampere , which is abbreviated as 'A' .

What is the relation of current with power ?

Description : What is the relation of current with power ?

Last Answer : The relationship of power , P to current , I is proportional. For example: P = VI, P = I ^ 2 * R

What is the relationship between the flow of electrons and the flow of current ?

Description : What is the relationship between the flow of electrons and the flow of current ?

Last Answer : The flow of current depends on the flow of electrons. Current flows only when electrons flow.

Why is the electric current absorbed in the coil ?

Description : Why is the electric current absorbed in the coil ?

Last Answer : Electromagnetic induction results in energy.

What is the conductivity of molar ?

Description : What is the conductivity of molar ?

Last Answer : The density of a solution as cm. When one mole of electrolytic substance is dissolved in it, the conductivity obtained by multiplying it by the relative conductivity of the solution is called molecular conductivity of the solution .

How do I purchase a product ?

Description : How do I purchase a product ?

Last Answer : From Alibaba you can purchase products by paying MASTER CARD or through bank.

What is an analog signal ?

Description : What is an analog signal ?

Last Answer : Signals whose values ​​change continuously are called analog signals. For example- voltage of electricity supplied to the house.

What is Zener Diod ?

Description : What is Zener Diod ?

Last Answer : Zener diode is a special type of diode which, like ordinary diode, not only conducts current in the forward direction , but also in the opposite direction if the voltage exceeds the level of breakdown ... diode is to use the shunt regulator and the voltage reference as the voltage of the circuit.

What is the multiplying factor of shunt ?

Description : What is the multiplying factor of shunt ?

Last Answer : Answer : The ratio of load or matte current to ammeter current is called shunt multiplying power.

What is ammeter shunt ?

Description : What is ammeter shunt ?

Last Answer : A small amount of radial coupling in parallel with the coil to increase the range of ammeter is called ammeter shunt.

What are symmetrical and asymmetrical faults ?

Description : What are symmetrical and asymmetrical faults ?

Last Answer : Symmetrical Fault: The same amount in each phase due to the float in the electrical system. The fault that causes hot current to flow is called semantic fault. Circuit breaker ratings are determined by ... through each fan is called an asymmetrical fault. The relay is set via asymmetrical font.

What is Basbar and Bas Kaplar ?

Description : What is Basbar and Bas Kaplar ?

Last Answer : Basbar : Basbar is basically a sheet or color of copper or aluminum. It is the job of the bus driver to deliver power to one or more lads with power from one or more cables. Bus ... is basically a combination of circuit breaker and isolator. There are fire proof walls around the bus coupler.

Why is the busbar sectionalized ?

Description : Why is the busbar sectionalized ?

Last Answer : Answer : If an error occurs in any part of the busbar, the operation of the entire busbar system will not stop. The maximum success of this system is due to the interconnection of different sections of the circuit and the smooth distribution in the outgoing circuit.

title : _

Description : title : _

Last Answer : Basbar is a type of copper and aluminum conductive sheet or mata rod , which collects electrical energy from one or more circuits and distributes that energy through one or more circuits.

Write different font names or different short circuit font names ?

Description : Write different font names or different short circuit font names ?

Last Answer : There are two main types of short circuit faults. Namely- 1. Semantic faults and 2. Asymmetrical font Symmetrical fault - a) Short circuit three phases together b) Short circuit asymmetrical fault with three ... result c) Double line to ground font d) Two phase one Circuit and third phase earth.

What is Electrical Fault ? What is the cause of the fault ?

Description : What is Electrical Fault ? What is the cause of the fault ?

Last Answer : Answer : Fault: When two or more conductors come in contact with each other while operating at normal voltage difference, the result is said to be organized. Causes of Fault: Faults are organized due to ... loss of line c) Lightning charge d) Voltage drop e) Loss of unbalance and stability etc.