Does being thick increase or decrease the current carrying capacity ?

Does being thick increase or decrease the current carrying capacity ?
by

1 Answer

Answer :

: The thicker it is, the greater the current carrying capacity.
by

Related questions

For a wall carrying heavy load on low bearing capacity soil, (A) Lean concrete bed is provided (B) Thick concrete bed is provided (C) Reinforced concrete bed is provided (D) Both (a) and (c) of the above

Description : For a wall carrying heavy load on low bearing capacity soil, (A) Lean concrete bed is provided (B) Thick concrete bed is provided (C) Reinforced concrete bed is provided (D) Both (a) and (c) of the above

Last Answer : Answer: Option D

Electric cables are formed of stranded wire to ____________. A. increase the current carrying capability for a given size wire B. increase their flexibility C. decrease the weight for a given size wire D. assure good conductivity at junction points

Description : Electric cables are formed of stranded wire to ____________. A. increase the current carrying capability for a given size wire B. increase their flexibility C. decrease the weight for a given size wire D. assure good conductivity at junction points

Last Answer : Answer: B

What is capacity factor ?

Description : What is capacity factor ?

Last Answer : The ratio between the total power produced at a given time and if the plant is running at full capacity at that time, is called capacity factor.

What is the thermal capacity ? What is thermal capacity ?

Description : What is the thermal capacity ? What is thermal capacity ?

Last Answer : The amount of heat required to increase the temperature of an object by 1c is called the thermal reaction of that object.

What is the way to increase the stability of UPS ?

Description : What is the way to increase the stability of UPS ?

Last Answer : Ways to increase the stability of UPS If you want to get full service from UPS, you have to keep an eye on some important things. Many users turn off the computer after working on the computer as ... keep UPST fully charged at all times and will enable it to provide better service for a long time.

Recycling back of outlet stream to the reactor from an ideal CSTR carrying out a first order liquid phase reaction will result in __________ in conversion. (A) Decrease (B) Increase (C) No change (D) Either (A) or (B), depends on the type of reaction

Description : Recycling back of outlet stream to the reactor from an ideal CSTR carrying out a first order liquid phase reaction will result in __________ in conversion. (A) Decrease (B) Increase (C) No change (D) Either (A) or (B), depends on the type of reaction

Last Answer : (C) No change

A steam carrying pipeline is insulated with two layers of insulating materials with the inferior insulation material forming the inner part. If the two insulating layers are interchanged, the heat conducted will (A) Increase (B) Decrease (C) Remain unaffected (D) May increase or decrease; depends on the thickness of each layer

Description : A steam carrying pipeline is insulated with two layers of insulating materials with the inferior insulation material forming the inner part. If the two insulating layers are interchanged, the heat conducted ... ) Remain unaffected (D) May increase or decrease; depends on the thickness of each layer

Last Answer : Option C

which would most likely increase the carrying capacity for humans in a certain region ( apex )?

Description : which would most likely increase the carrying capacity for humans in a certain region ( apex )?

Last Answer : crops that grow more reliably

What might humans do to increase the earths carrying capacity for all-species?

Description : What might humans do to increase the earths carrying capacity for all-species?

Last Answer : Humans need to maintain enough space and resources to increase the earth's capacity for all species. They have to make sure that they and other people have enough to survive.

The maximum load carried by a pile, when it continues to sink without further increase of load, is known as (A) Ultimate load carrying capacity (B) Ultimate bearing capacity (C) Ultimate bearing resistant (D) All the above

Description : The maximum load carried by a pile, when it continues to sink without further increase of load, is known as (A) Ultimate load carrying capacity (B) Ultimate bearing capacity (C) Ultimate bearing resistant (D) All the above

Last Answer : Answer: Option D

The best compromise between the increase of the length of a highway and reduction in its load carrying capacity, is the ruling gradient (A) 1 in 10 (B) 1 in 15 (C) 1 in 20 (D) 1 in 25

Description : The best compromise between the increase of the length of a highway and reduction in its load carrying capacity, is the ruling gradient (A) 1 in 10 (B) 1 in 15 (C) 1 in 20 (D) 1 in 25

Last Answer : Answer: Option C

The purpose of lateral ties in short R.C. columns is to (a) Increase the load carrying capacity of column (b) Facilitate compaction of concrete (c) Facilitate construction (d) Avoid buckling of longitudinal bars

Description : The purpose of lateral ties in short R.C. columns is to (a) Increase the load carrying capacity of column (b) Facilitate compaction of concrete (c) Facilitate construction (d) Avoid buckling of longitudinal bars

Last Answer : (d) Avoid buckling of longitudinal bars

The purpose of lateral ties in short reinforced concrete columns is to [ A ] Facilitate construction [ B ] Facilitate compaction of concrete [ C ] Increase the load carrying capacity of the columns [ D ] Avoid buckling of longitudinal bars

Description : The purpose of lateral ties in short reinforced concrete columns is to [ A ] Facilitate construction [ B ] Facilitate compaction of concrete [ C ] Increase the load carrying capacity of the columns [ D ] Avoid buckling of longitudinal bars

Last Answer : [ D ] Avoid buckling of longitudinal bars

Leaf spring for vehicles are nipped to (a) To vary the effective length of the spring (b) to increase the interleaf friction (c) Improve the load carrying capacity of spring (d) ensure that all leaves are uniformly stressed during loading

Description : Leaf spring for vehicles are nipped to (a) To vary the effective length of the spring (b) to increase the interleaf friction (c) Improve the load carrying capacity of spring (d) ensure that all leaves are uniformly stressed during loading

Last Answer : (d) ensure that all leaves are uniformly stressed during loading

What is short circuit current ?

Description : What is short circuit current ?

Last Answer : Answer : A fault in an electrical system whose current, before or after the current flows through the load, is combined with one or more phases of neutral current which causes more current to flow than normal. The current is called short circuit current.

What is a current limiting reactor ? How many types and what are they ?

Description : What is a current limiting reactor ? How many types and what are they ?

Last Answer : Answer : A current limiting reactor is basically an inductive coil which limits the short circuit current by providing inductive reactance when required. Types: 1. Based on the structure- a) Dry type ... reactor. Basbar reactors are again of 2 types- a) Ring system reactor b) Tiber system reactor

What is the method of diagnosing short circuit current ?

Description : What is the method of diagnosing short circuit current ?

Last Answer : There are three methods for determining short circuit current , namely- 1) Ohmic method 2) Per unit method 3.) Percentage reactance method.

How to reduce eddy current loss ?

Description : How to reduce eddy current loss ?

Last Answer : Answer : If you want to reduce the current loss, you must make the laminations of the core as thin as possible. And if the laminations can be well laminated or insulated then the eddy current loss can be greatly reduced.

What is Eddie Current Loss ?

Description : What is Eddie Current Loss ?

Last Answer : The iron loss of the transformer depends on the maximum flux density and the supply frequency. Since the transformer is always fixed i.e. fixed frequency and supply and fixed then here core and ... here is considered as constant or unchanged loss. And this is basically known as Eddie Current Loss.

What is the no-load current of transformer ?

Description : What is the no-load current of transformer ?

Last Answer : The small amount of current flowing in the primary winding in the no-load condition of the transformer is called no-load current.

What is the value of voltage and current of transformer ?

Description : What is the value of voltage and current of transformer ?

Last Answer : The value of voltage and current of the transformer depends on the number of patches of wires in the transformer.

What is quadratic current ?

Description : What is quadratic current ?

Last Answer : The vertical component of the current in an inductive or capacitive circuit which is at an angle of 90 সাথে with the voltage is called quadraturer or reactive current. Dear Reader, These were the important questions and answers of Circuit 1 today. Stay with us to get more such questions and answers.

Why is the current behind the voltage in the RLC circuit ?

Description : Why is the current behind the voltage in the RLC circuit ?

Last Answer : Inductance prevents any change in current or flux. So the current stays behind the voltage.

What are the types of electric current ?

Description : What are the types of electric current ?

Last Answer : There are two types of electric current , for example , ( a) direct current . And (b) alternating current .

What is current ?

Description : What is current ?

Last Answer : Answer : The rate at which free electrons located in a substance flow in a certain direction is called current .

What is the current source of Karshof ?

Description : What is the current source of Karshof ?

Last Answer : Karshoff's current formula: The algebraic sum of the combined currents at any point in a circuit is equal. Or the incoming current and the outgoing current are equal at any point in a circuit.

What is required to generate current ?

Description : What is required to generate current ?

Last Answer : Power generation or power generation or power generation or power generation is the production of power from any other primary energy source. The first basic theory of power generation was ... . Other sources used to generate electricity include solar energy and thermal energy stored underground.

How many units and what are the current levels ?

Description : How many units and what are the current levels ?

Last Answer : There are many common units of current measurement. 1. CGS power unit 2. CGS electromagnetic unit 3. Practical unit 4. International unit.

What is Alternating Current ?

Description : What is Alternating Current ?

Last Answer : An alternating current is a current that changes direction as it flows, and its value changes every moment.

What is the practical unit of current ?

Description : What is the practical unit of current ?

Last Answer : The practical unit of current is ampere ( Amp).

What is the international unit of current measurement ?

Description : What is the international unit of current measurement ?

Last Answer : The international unit of current measurement is Ampere , which is abbreviated as 'A' .

What is the relation of current with power ?

Description : What is the relation of current with power ?

Last Answer : The relationship of power , P to current , I is proportional. For example: P = VI, P = I ^ 2 * R

What is meant by constant current source ? What is a constant current source ?

Description : What is meant by constant current source ? What is a constant current source ?

Last Answer : A voltage source whose internal impedance is much higher than that of external load impedance is called a constant current source.

What is the current source of Ohm ?

Description : What is the current source of Ohm ?

Last Answer : : The current flowing through a conductor at a fine temperature is proportional to the voltage of the conductor. I = where , I = current , V = voltage R = resistance

What is the relationship between the flow of electrons and the flow of current ?

Description : What is the relationship between the flow of electrons and the flow of current ?

Last Answer : The flow of current depends on the flow of electrons. Current flows only when electrons flow.

Why is the electric current absorbed in the coil ?

Description : Why is the electric current absorbed in the coil ?

Last Answer : Electromagnetic induction results in energy.

A pile is being driven with a drop hammer weighing 1800 kg and having a free fall of 1.00 m. If the penetration with last blow is 5 mm, the load carrying capacity of the pile, -according to the Engineering News formula, is (A) 100 tonnes (B) 50 tonnes (C) 20 tonnes (D) 10 tonnes

Description : A pile is being driven with a drop hammer weighing 1800 kg and having a free fall of 1.00 m. If the penetration with last blow is 5 mm, the load carrying capacity of the pile, -according to the Engineering News formula, is (A) 100 tonnes (B) 50 tonnes (C) 20 tonnes (D) 10 tonnes

Last Answer : (D) 10 tonnes

TIG welding, thoriated tungsten electrodes are used, because it (A) Has higher current carrying capacity (B) Has better electron emissivity (C) Is stronger than ordinary tungsten (D) Is easy to prepare

Description : TIG welding, thoriated tungsten electrodes are used, because it (A) Has higher current carrying capacity (B) Has better electron emissivity (C) Is stronger than ordinary tungsten (D) Is easy to prepare

Last Answer : Option B

The current carrying capacity of cables in D.C. is more that in A.C. mainly due to (a) absence of harmonics (b) non-existence of any stability limit (c) smaller dielectric loss (d) absence of ripples (e) none of the above

Description : The current carrying capacity of cables in D.C. is more that in A.C. mainly due to (a) absence of harmonics (b) non-existence of any stability limit (c) smaller dielectric loss (d) absence of ripples (e) none of the above

Last Answer : (c) smaller dielectric loss

The thickness of the layer of insulation on the conductor, in cables, depends upon (a) Reactive power (b) Power factor (c) Voltage (d) Current carrying capacity

Description : The thickness of the layer of insulation on the conductor, in cables, depends upon (a) Reactive power (b) Power factor (c) Voltage (d) Current carrying capacity

Last Answer : (c) Voltage

Comparing the total copper cross sections in terms of current-carrying capacity for a single-phase and ...

Description : Comparing the total copper cross sections in terms of current-carrying capacity for a single-phase and a three-phase 120 V system with effective load resistance of 15Ω, will yield: A. single-phase 32 A; three-phase 16 ... C. single-phase 8 A; three-phase 4 A D. single-phase 16 A; three-phase 0 A

Last Answer : Comparing the total copper cross sections in terms of current-carrying capacity for a single-phase and a three-phase 120 V system with effective load resistance of 15Ω, will yield: single-phase 16 A; three-phase 8 A 

Absorption accompanied by heat evolution results in (A) Increased capacity of the absorber (B) Increase in equilibrium solubility (C) Decrease in equilibrium solubility (D) None of these

Description : Absorption accompanied by heat evolution results in (A) Increased capacity of the absorber (B) Increase in equilibrium solubility (C) Decrease in equilibrium solubility (D) None of these

Last Answer : (C) Decrease in equilibrium solubility

Pick out the wrong statement. (A) In solvent extraction, the distribution co-efficient should be as large as possible for solvent economy (B) With increase in pressure, the solubility of gases in solvent increases at a fixed temperature (C) Decrease in Murphree plate efficiency is an indication of entrainment in distillation column (D) The capacity of a distillation column is maximum at total reflux

Description : Pick out the wrong statement. (A) In solvent extraction, the distribution co-efficient should be as large as possible for solvent economy (B) With increase in pressure, the solubility of ... in distillation column (D) The capacity of a distillation column is maximum at total reflux

Last Answer : (D) The capacity of a distillation column is maximum at total reflux

Multiple effect evaporators ar used to (A) Increase the steam economy & decrease the capacity (B) Increase the steam economy & the capacity (C) Decrease the steam economy & the capacity (D) Decrease the steam economy & increase the capacity

Description : Multiple effect evaporators ar used to (A) Increase the steam economy & decrease the capacity (B) Increase the steam economy & the capacity (C) Decrease the steam economy & the capacity (D) Decrease the steam economy & increase the capacity

Last Answer : (B) Increase the steam economy & the capacity

Weathering of coal during storage causes (A) Reduction in coal size (B) Increase in its friability (C) Decrease in its caking capacity (D) All (A), (B) and (C)

Description : Weathering of coal during storage causes (A) Reduction in coal size (B) Increase in its friability (C) Decrease in its caking capacity (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Effects of shear force and axial force on plastic moment capacity of a structure are respectively to (A) Increase and decrease (B) Increase and increase (C) Decrease and increase (D) Decrease and decrease

Description : Effects of shear force and axial force on plastic moment capacity of a structure are respectively to (A) Increase and decrease (B) Increase and increase (C) Decrease and increase (D) Decrease and decrease

Last Answer : (D) Decrease and decrease

The torsion resisting capacity of a given reinforced concrete section. (a) Decreases with decrease in stirrups spacing. (b) Decreases with increase in longitudinal bars. (c) Does not depend upon stirrups and longitudinal steels. (d) Increases with increase in stirrups and longitudinal steels.

Description : The torsion resisting capacity of a given reinforced concrete section. (a) Decreases with decrease in stirrups spacing. (b) Decreases with increase in longitudinal bars. (c) Does not depend upon stirrups and longitudinal steels. (d) Increases with increase in stirrups and longitudinal steels.

Last Answer : (d) Increases with increase in stirrups and longitudinal steels.

What is one way to lower material costs? a. decrease MTBF b. increase capacity c. increase automation d. none of the above

Description : What is one way to lower material costs? a. decrease MTBF b. increase capacity c. increase automation d. none of the above

Last Answer : a. decrease MTBF

Consequences that are commonly associated with the multisegment targeting strategy are: A)an increase in sales and a decrease in total marketing costs B)the use of excess production capacity and a decrease in total marketing costs C)an increase in sales and the use of excess production capacity D)a decrease in production costs and a decrease in total marketing costs

Description : Consequences that are commonly associated with the multisegment targeting strategy are: A)an increase in sales and a decrease in total marketing costs B)the use of excess production capacity ... excess production capacity D)a decrease in production costs and a decrease in total marketing costs

Last Answer : C)an increase in sales and the use of excess production capacity

Which one of the change may occur due to desertification? a) decrease in atmospheric temperature b) increase in water holding capacity of soil c) increased chances of flood d)conversion of fertile land into a desert

Description : Which one of the change may occur due to desertification? a) decrease in atmospheric temperature b) increase in water holding capacity of soil c) increased chances of flood d)conversion of fertile land into a desert

Last Answer : d)conversion of fertile land into a desert