What is a re-wearable fuse ?

1 Answer

Answer :

: A fuse that can be activated by inserting a new wire is called a reusable fuse.

Related questions

Description : In which plug fuse is used ?

Last Answer : Used in three pins

Description : What is a fuse ?

Last Answer : An electrical device used to prevent excess current in an electrical circuit is called a fuse.

Description : What is the function of fuse ?

Last Answer : The function of the fuse is to protect the whole circuit from overheating due to high voltage.

Description : What is a fuse ?

Last Answer : fuse _ _ _

Description : Why is there no fuse in the neutral line ?

Last Answer : There will be no benefit if the fuse is in the neutral line. This means that the problem of the fuse is not removed. Cannot protect over voltage or current. Electronics will not be able to protect the device from damage. That is why the neutral fuse is not given to him.

Description : Which wire is the fuse connected to ?

Last Answer : The fuse is connected to the live wire.

Description : What to do when changing the fuse ?

Last Answer : The main switch has to be turned off when changing the fuse.

Description : Can Arduino be used for building a smart wearable device?

Last Answer : Yes, Arduino can be used for building a smart wearable device by using sensors to measure various physiological parameters such as heart rate and temperature, and by using communication modules to transmit data to a control system to optimize wearable device management.

Description : Can Arduino be used for building a smart wearable device?

Last Answer : Yes, Arduino can be used for building a smart wearable device by using sensors to measure body movements, temperature, and other parameters, and by using communication modules to transmit data to a mobile app or a control system.

Description : Can Arduino be used for building a wearable device?

Last Answer : Yes, Arduino can be used for building a wearable device by using sensors to measure various aspects of the user's health or behavior, and by using communication modules to transmit the data to a display or a mobile app.

Description : Can I use Arduino for wearable technology applications?

Last Answer : Yes, Arduino can be used for wearable technology applications by interfacing with various sensors, actuators, and other components to create custom wearable devices and applications, such as health monitors or smart clothing.

Description : Can I use Arduino to build a wearable device?

Last Answer : Yes, Arduino can be used to build a wearable device by interfacing with various sensors, displays, and other components to create custom wearable applications, such as fitness trackers or smart watches.

Description : What's the best wearable light for a 5k runner?

Last Answer : answer:LL Bean sellsn my favorite, which I wear when the power is out,but it would work fine for a runner. I find it comfortable; the straps can be adjusted and I do have a lot of a ... .com/llb/shop/76207?feat=507967-GN2&page=trailblazer-4-led-headlamp The four LEDs give you a very bright light.

Description : How can I hang - or otherwise store - cardigans while keeping them in wearable condition?

Last Answer : answer:This has an easy solution. Buy a set of satin-covered padded hangers. Like these I’ve had some for over 40 years (although I do tend to fold my cashmere sweaters and keep them in drawers.)

Description : Men's Style: Is linen clothing wearable, or should I go back to Cuba?

Last Answer : They sound nice. Linen looks fine in the appropriate climes. I wouldn’t wear it in Manhattan. Florida, why not?

Description : What are the Best Wearable devices for Seniors?

Last Answer : There are many brands of activity finders, smart watches, medical alert devices to secure our still, active an independent beloved seniors.

Description : What is a technology‐enabled microchip implanted into the human body? a. Wearable computer b. GPS c. Implant chip d. None of the above

Last Answer : c. Implant chip

Description : What is a fully‐equipped computer that you wear as a piece of clothing or attached to a piece of clothing similar to the way you would carry your cell phone on your belt? a. Wearable computer b. GPS c. Implant chip d. None of the above

Last Answer : a. Wearable computer

Description : IOT devices are various types, for instance______________. A. Wearable sensors. B. Smart watches. C. LED lights. D. All of the above

Last Answer : D. All of the above 

Description : Explain the materials used in wearable antennas with their properties

Last Answer : 1. The Substrate:   The fabric textile material to be used should have more dielectric permittivity. o Low dielectric constant o Nominal thickness value. o Low moisture content of fabric. ... . Conducting material having low and stable electrical resistance, flexible in nature eg.: Copper, Nickel 

Description : What is the conductivity of molar ?

Last Answer : The density of a solution as cm. When one mole of electrolytic substance is dissolved in it, the conductivity obtained by multiplying it by the relative conductivity of the solution is called molecular conductivity of the solution .

Description : How do I purchase a product ?

Last Answer : From Alibaba you can purchase products by paying MASTER CARD or through bank.

Description : What is an analog signal ?

Last Answer : Signals whose values ​​change continuously are called analog signals. For example- voltage of electricity supplied to the house.

Description : What is Zener Diod ?

Last Answer : Zener diode is a special type of diode which, like ordinary diode, not only conducts current in the forward direction , but also in the opposite direction if the voltage exceeds the level of breakdown ... diode is to use the shunt regulator and the voltage reference as the voltage of the circuit.

Description : What is the multiplying factor of shunt ?

Last Answer : Answer : The ratio of load or matte current to ammeter current is called shunt multiplying power.

Description : What is ammeter shunt ?

Last Answer : A small amount of radial coupling in parallel with the coil to increase the range of ammeter is called ammeter shunt.

Description : What is short circuit current ?

Last Answer : Answer : A fault in an electrical system whose current, before or after the current flows through the load, is combined with one or more phases of neutral current which causes more current to flow than normal. The current is called short circuit current.

Description : What is a current limiting reactor ? How many types and what are they ?

Last Answer : Answer : A current limiting reactor is basically an inductive coil which limits the short circuit current by providing inductive reactance when required. Types: 1. Based on the structure- a) Dry type ... reactor. Basbar reactors are again of 2 types- a) Ring system reactor b) Tiber system reactor

Description : What is the method of diagnosing short circuit current ?

Last Answer : There are three methods for determining short circuit current , namely- 1) Ohmic method 2) Per unit method 3.) Percentage reactance method.

Description : What are symmetrical and asymmetrical faults ?

Last Answer : Symmetrical Fault: The same amount in each phase due to the float in the electrical system. The fault that causes hot current to flow is called semantic fault. Circuit breaker ratings are determined by ... through each fan is called an asymmetrical fault. The relay is set via asymmetrical font.

Description : What is Basbar and Bas Kaplar ?

Last Answer : Basbar : Basbar is basically a sheet or color of copper or aluminum. It is the job of the bus driver to deliver power to one or more lads with power from one or more cables. Bus ... is basically a combination of circuit breaker and isolator. There are fire proof walls around the bus coupler.

Description : Why is the busbar sectionalized ?

Last Answer : Answer : If an error occurs in any part of the busbar, the operation of the entire busbar system will not stop. The maximum success of this system is due to the interconnection of different sections of the circuit and the smooth distribution in the outgoing circuit.

Description : title : _

Last Answer : Basbar is a type of copper and aluminum conductive sheet or mata rod , which collects electrical energy from one or more circuits and distributes that energy through one or more circuits.

Description : Write different font names or different short circuit font names ?

Last Answer : There are two main types of short circuit faults. Namely- 1. Semantic faults and 2. Asymmetrical font Symmetrical fault - a) Short circuit three phases together b) Short circuit asymmetrical fault with three ... result c) Double line to ground font d) Two phase one Circuit and third phase earth.

Description : What is Electrical Fault ? What is the cause of the fault ?

Last Answer : Answer : Fault: When two or more conductors come in contact with each other while operating at normal voltage difference, the result is said to be organized. Causes of Fault: Faults are organized due to ... loss of line c) Lightning charge d) Voltage drop e) Loss of unbalance and stability etc.

Description : What features should a switchgear have ?

Last Answer : Switchgear should have the following characteristics- a) Sensitivity b) Detection ability c) Reliability d) High speed e) Durability. F) Expansion advantage g) Simplicity.

Description : What are the components of switch gear ?

Last Answer : The components of switch gear are: circuit breaker , relay , instrument transformer , housing , conductor etc.

Description : What do you mean by switchgear ?

Last Answer : Answer : Switch gear does not mean a single corner object. It refers to the position of the electromagnetic system, including the connective , isolating , and maintenance equipment of normal activity .

Description : What is an Earth Electrode ?

Last Answer : Puta metal part in the soil which connects to the soil is called earth electrode. Thank you all for today's electrical questions and answers.

Description : What is Earthing Lead ?

Last Answer : The wire that connects the earth continuity wire and the earth electrode is called the earthing lead.

Description : What earthing is done in hilly areas ?

Last Answer : Sheet earthing is done in hilly areas. Shit electrodes are placed by digging trenches on the slopes of the hill.

Description : What should be the size of rod earthing ?

Last Answer : In case of iron or steel rod the diameter is 16 mm but in case of copper rod it is 12.5 mm. In both cases the length is at least 2.5 m. Is to be.

Description : What does earth continuity mean ?

Last Answer : The conduction wire that connects the earthing lead to the metal cover of electrical furniture, appliances, or wiring is called the earth continuity wire.

Description : Which earthing is less expensive ?

Last Answer : Rod earthing is the least expensive. Because the soil does not have to be eroded, the cost is less than other earthing.

Description : What should be the size of the pipe electrode ?

Last Answer : The size of the pipe electrode should be 36 mm diameter 2 to 2.75 m long galvanized iron or steel pipe.

Description : How many types of earthing and what are they ?

Last Answer : There are two types of earthing , namely _ a) system earthing b) equipment earthing.

Description : What are the essential elements for earthing ?

Last Answer : They are _ a) earthen continuity b) earthing lead c) earthy electrode

Description : What is the best earthing method ?

Last Answer : Pipe earthing method is best. This is because it is less expensive and when the soil dries out in the dry season , regular earthing can be done by pouring water through the pipes.

Description : What is Neutral Plan ?

Last Answer : A plane at infinite distance , where the value of electric field intensity and potential V is zero , is called Neautral Plan .

Description : On what subject does inductance in transmission line depend ?

Last Answer : a) On the line b) Conductor spacing c) Conductor radius