1 cm = how many mm. ?

1 Answer

Answer :

1 cm = 10 mm.

Related questions

Description : A body is executing simple harmonic motion of amplitude 1 cm. Its velocitywhile passing through the central point is 10 mm/sec. Its frequency will be a.2.99 rps b.2.22 rps c.1 rps d.1.59 rps e.1.77 rps

Last Answer : c. 1 rps

Description : A dash pot consists of a cylinder 10 cm in diameter in which slides a piston 12 cm long having a radial clearance of 1 mm. The cylinder is filled with oil having a viscosity of 1 poise. What will be the resistance offered ... with a velocity of 3 cm/sec a.1090 kg b.100 kg c.10900 kg d.10 kg e.50 kg

Last Answer : c. 10900 kg

Description : A copper wire 4 mm in diameter is evenly wound about a cylinder whose length is 24 cm and diameter 20 cm so as to cover the surface. -Maths 9th

Last Answer : answer:

Description : (a) The length of Ramesh’s notebook is 9 cm 5 mm. What will be its length in cm? (b) The length of a young gram plant is 65 mm. Express its length in cm. -Maths 9th

Last Answer : (a) The length of Ramesh notebook is 9 cm 5 mm The length in cm is [(9 + 5 / 10)] cm = 9.5 cm (b) The length of a gram plant is 65 mm Hence, the length in cm is 65 / 10 = 6.5 cm

Description : Express the following as cm using decimals. (a) 2 mm (b) 30 mm (c) 116 mm (d) 4 cm 2 mm (e) 162 mm (f) 83 mm -Maths 9th

Last Answer : We know that 1 cm = 10 mm 1 mm = 1 / 10 cm (a) 2 mm = 2 / 10 cm = 0.2 cm (b) 30 mm = 30 / 10 cm = 3.0 cm (c) 116 mm = 116 / 10 cm = 11.6 cm (d) 4 cm 2 mm = [(4 + 2 / 10)] cm = 4.2 cm (e) 162 mm = 162 / 10 cm = 16.2 cm (f) 83 mm = 83 / 10 cm = 8.3 cm

Description : which is shorter 13 mm or 1.9 cm?

Last Answer : 1 cm = 10 mmSo 1.9 cm = 19 mm, and 13 mm = 1.3 cm. This means that 13 mm is shorter than 1.9 cm because 13 mm (1.3 cm) is shorter than 19 mm (1.9 cm).

Description : 1 mm. = How many cm. ?

Last Answer : 1 mm = 0.1 cm.

Description : A student measured the diameter of a small steel ball using a screw gauge of least count 0.001 cm. The main scale reading is 5 mm and zero of circular

Last Answer : A student measured the diameter of a small steel ball using a screw gauge of least count 0.001 cm. The main scale ... (C) 0.053 cm (D) 0.529 cm

Description : A rheostat has 100 turns of a wire of radius 0.4 mm having resistivity `4.2xx10^(-7) Omega`m. The diameter of each turn is 3 cm. What is the maximum v

Last Answer : A rheostat has 100 turns of a wire of radius 0.4 mm having resistivity `4.2xx10^(-7) ... the maximum value of resistance that it can introduce ?

Description : How many mm does 3.1 cm equal?

Last Answer : 31

Description : What is 27 cm in mm?

Last Answer : It is 270 mm

Description : What is greater 64 cm or 630 mm?

Last Answer : 64 cm is greater than 630 mm which equals 63 cm

Description : How many millimeters (mm) are equivalent to 2.5 cm?

Last Answer : Feel Free to Answer

Description : Is 35.5 mm greater than 10 cm?

Last Answer : 10 cm is greater than 35.5 mm. (35.5 mm = 3.55 cm)

Description : What is 150 mm cm?

Last Answer : Wrong it's for example : 400 mm = 40 cm

Description : Which of the following statements about septic shock are true? A. A circulating myocardial depressant factor may account for the cardiac dysfunction sometimes seen with shock due to sepsis or ... animal studies that demonstrate a significant improvement in survival with the use of such agents.

Last Answer : Answer: AB DISCUSSION: Shock due to sepsis or SIRS frequently manifests as a hyperdynamic cardiovascular response, consisting of an elevated CI and a decreased SVR or SVRI. Occasionally, ... been encouraging thus far in human clinical trials, despite the promising results from many animal studies

Description : The settlement velocity of a solid (diameter 0.5 mm, specific gravity 1.75) in water having temperature 10°C, is A. 213.5 cm/sec B. 313.5 cm/sec C. 413.5 cm/sec D. 500 cm/sec

Last Answer : ANS: B

Description : At what particular wavelength is solar flux measured? A. 10.7 mm band B. 10.7 m band C. 10.7 cm band D. 10.7 nm band

Last Answer : C. 10.7 cm band

Description : What is the typical separation between the two conductors in a parallel wire line? A. 0.001 to 0.01 m B. 200 to 500 mm C. 0.635 to 15.24 cm D. 2.5 to 5 in.

Last Answer : C. 0.635 to 15.24 cm

Description : Oxygen molecule absorption peaks to electromagnetic wave are at what wavelengths? A. 1.35 cm and 1.7 mm B. 5 mm and 2.5 mm C. 5 cm and 2.5 cm D. 1.35 mm and 1.7 μm

Last Answer : B. 5 mm and 2.5 mm

Description : Which of the following wavelengths where absorption of electromagnetic waves becomes peak due to vibrational resonances in the water vapor molecule? A. 1.35 cm and 1.7 mm B. 1.5 mm and 5 mm C. 1.35 dm and 1.7 cm D. 1.5 cm and 5mm

Last Answer : A. 1.35 cm and 1.7 mm

Description : Oxygen molecule absorption peaks to electromagnetic wave are at what wavelengths? A. 1.35 mm and 1.7 μm B. 1.35 cm and 1.7 mm C. 5 cm and 2.5 cm D. 5 mm and 2.5 mm

Last Answer : D. 5 mm and 2.5 mm

Description : Which of the following wavelengths where absorption of electromagnetic waves becomes peak due to vibrational resonances in the water vapor molecule? A. 1.35 cm and 1.7 mm B. 1.5 mm and 5mm C. 1.35 dm and 1.7cm D. 1.5 cm and 5 mm

Last Answer : A. 1.35 cm and 1.7 mm

Description : The opening of a 200 mesh screen (Taylor series) is (A) 0.0074 cm (B) 0.0074 mm (C) 0.0047 cm (D) 74 milli-micron

Last Answer : (A) 0.0074 cm

Description : If a snail crawls 12 cm in 60 s then it's average speed in mm s-1 is A. 2 mm s-1 B. 5 mm s-1 C. 10 mm s-1 D. 20 mm s-1

Last Answer : 2 mm s-1

Description : From above numerical find the static deflection A 0.0245 mm B 0.0025 mm C 0.0245 m D 0.0245 cm

Last Answer : C 0.0245 m

Description : Most bacterial cells are measured using what metric system of length? a. Millimeters (mm) b. Micrometers (µm) c. Nanometers (nm) d. Centimeters (cm)

Last Answer : b. Micrometers (µm)

Description : A steel rod 1 metre long having square cross section is pulled under a tensile load of 8 tonnes. The  extension in the rod was 1 mm only. If Esteel = 2 × 106  kg/cm2 , the side of the rod, is  (A) 1 cm  (B) 1.5 cm  (C) 2 cm  (D) 2.5 cm 

Last Answer : (C) 2 cm 

Description : A steel bar 5 m × 50 mm is loaded with 250,000 N. If the modulus of elasticity of the material is 0.2  MN/mm2  and Poisson's ratio is 0.25, the change in the volume of the bar is:  (A) 1.125 cm3 (B) 2.125 cm3 (C) 3.125 cm3 (D) 4.125 cm

Last Answer : (C) 3.125 cm

Description : A cantilever of length 2 cm and depth 10 cm tapers in plan from a width 24 cm to zero at its free  end. If the modulus of elasticity of the material is 0.2 × 106  N/mm2 , the deflection of the free end,  is  (A) 2 mm  (B) 3 mm  (C) 4 mm  (D) 5 mm

Last Answer : (D) 5 mm

Description : A steel bar 20 mm in diameter simply-supported at its ends over a total span of 40 cm carries a  load at its centre. If the maximum stress induced in the bar is limited to N/mm2, the bending  strain energy stored in the ... (A) 411 N mm  (B) 511 N mm  (C) 611 N mm  (D) 711 N mm 

Last Answer : (C) 611 N mm 

Description : A steel rod of 2 cm diameter and 5 metres long is subjected to an axial pull of 3000 kg. If E = 2.1 × 106 , the elongation of the rod will be (A) 2.275 mm (B) 0.2275 mm (C) 0.02275 mm (D) 2.02275 mm

Last Answer : (B) 0.2275 mm

Description : If a steel rod of 20 mm diameter and 5 metres long elongates by 2.275 mm when subjected to an  axial pull of 3000 kg, the stress developed, is  (A) 9.5541 kg/cm2 (B) 95.541 kg/cm2 (C) 955.41 kg/cm2 (D) 9554.1 kg/cm

Last Answer : (C) 955.41 kg/cm2

Description : If a steel rod of 20 mm diameter and 5 metres long elongates by 2.275 mm when subjected to an  axial pull of 3000 kg, the stress developed, is  (A) 9.5541 kg/cm2 (B) 95.541 kg/cm2 (C) 955.41 kg/cm2 (D) 9554.1 kg/cm

Last Answer : (C) 955.41 kg/cm2

Description : For determining the ultimate bearing capacity of soil, the recommended size of a square bearing plate to be used in load plate test should be 30 to 75 cm square with a minimum thickness of (A) 5 mm (B) 10 mm (C) 15 mm (D) 25 mm

Last Answer : Answer: Option D

Description : An R.C.C. column of 30 cm diameter is reinforced with 6 bars 12 mm placed symmetrically along the circumference. If it carries a load of 40, 000 kg axially, the stress is (A) 49.9 kg/cm2 (B) 100 kg/cm2 (C) 250 kg/cm2 (D) 175 kg/cm

Last Answer : Answer: Option A

Description : Which of the following ranges identifies the amount of pressure within the endotracheal tube cuff that is believed to prevent both injury and aspiration? a) 20-25 mm Hg water pressure. Usually the ... pressure A measure of 0-5 mm Hg water pressure would indicate that the cuff is underinflated.

Last Answer : a) 20-25 mm Hg water pressure. Usually the pressure is maintained at less than 25 cm water pressure to prevent injury and at more than 20 cm water pressure to prevent aspiration.

Description : If the width of a pavement slab is 7.5 m, thickness 20 cm and working stress 1400 kg/cm2 , spacing of 10 mm tie bars for the longitudinal joint, is (A) 10 cm (B) 20 cm (C) 30 cm (D) 40 cm

Last Answer : Answer: Option C

Description : Bitumen of grade 80/100 means (A) Its penetration value is 8 mm (B) Its penetration value is 10 mm (C) Its penetration value is 8 to 10 mm (D) Its penetration value is 8 to 10 cm

Last Answer : Answer: Option C

Description : In slump test, each layer of concrete is compacted by a steel rod 60 cm long and of 16 mm diameter for (A) 20 times (B) 25 times (C) 30 times (D) 50 time

Last Answer : Answer: Option B

Description : The unit of pressure in S.I. units is  (a) kg/cm2  (b) mm of water column  (c) pascal  (d) dynes per square cm  (e) bars

Last Answer : Answer : c

Description : If the original scale of a negative is 1 : 10,000, the ground resolution, considering that we get nearly 20 lines pair per mm, will be : (a) 50 mm (b) 20 cm (c) 2 m (d) 25 cm

Last Answer : (d) 25 cm

Description : The radius of hydrogen atom is about a) 5 x 10-11 m b) 5 x 10-11 cm c) 5 x 10-11 mm d) 5 x 10-11 dm

Last Answer : a) 5 x 10-11 m

Description : Finished tolerance on 10 cm. long st. edge on surface of head shall be? (i) 0 to 0.1 mm (ii) 0 to 0.2 mm (iii) 0 to 0.4 mm* (iv) 0 to 0.3 mm

Last Answer : (iii) 0 to 0.4 mm*

Description : Finished tolerance on 10 cm long st. edge at the centre on gauge side shall be? (i) ± 0.4 mm (ii) ± 0.1 mm (iii) ± 0.2 mm (iv) ± 0.3 mm*

Last Answer : iv) ± 0.3 mm*

Description : The danger level should be marked with a bright red band …… wide centrally over a white band …… wide for a length of……… a) 5 cm, 10 cm, 60 cms* b) 10 cm, 20 cm, 60 cm c) 15 cm, 30 mm, 60 cm d) None of the above

Last Answer : a) 5 cm, 10 cm, 60 cms*

Last Answer : A wire of 0.14 mm diameter and specific resistance 9.6 micro-ohm-cm is 440 cm long. The resistance of the wire will be 27.4 ohm.