If a snail crawls 12 cm in 60 s then it's average speed in mm s-1 is A. 2 mm s-1 B. 5 mm s-1 C. 10 mm s-1 D. 20 mm s-1

If a snail crawls 12 cm in 60 s then it's average speed in mm s-1 is

A. 2 mm s-1

B. 5 mm s-1

C. 10 mm s-1

D. 20 mm s-1
by

1 Answer

Answer :

2 mm s-1
by

Related questions

Speed of snail as compared to speed of a car will be in units A. cm s-1 B. m s-1 C. km s-1 D. km h-1

Description : Speed of snail as compared to speed of a car will be in units A. cm s-1 B. m s-1 C. km s-1 D. km h-1

Last Answer :  cm s-1

The danger level should be marked with a bright red band …… wide centrally over a white band …… wide for a length of……… a) 5 cm, 10 cm, 60 cms* b) 10 cm, 20 cm, 60 cm c) 15 cm, 30 mm, 60 cm d) None of the above

Description : The danger level should be marked with a bright red band …… wide centrally over a white band …… wide for a length of……… a) 5 cm, 10 cm, 60 cms* b) 10 cm, 20 cm, 60 cm c) 15 cm, 30 mm, 60 cm d) None of the above

Last Answer : a) 5 cm, 10 cm, 60 cms*

In the first two years of life, a human baby crawls about 10 km. Crossing the distance ?

Description : In the first two years of life, a human baby crawls about 10 km. Crossing the distance ?

Last Answer : In the first two years of life, a human baby crawls about 150 km. Transcends distance.

Two waves, each of amplitude 1.5 mm and frequency 10 Hz, are travelling in opposite direction with a speed of 20 mm/s. The distance in mm between adjacent nodes is : (1) 1.0 (2) 1.2 (3) 1.5 (4) 2.0

Description : Two waves, each of amplitude 1.5 mm and frequency 10 Hz, are travelling in opposite direction with a speed of 20 mm/s. The distance in mm between adjacent nodes is : (1) 1.0 (2) 1.2 (3) 1.5 (4) 2.0

Last Answer : (1) 1.0 Explanation: Since the amplitudes, frequency and the speed of both the waves are in same, hence the wavelength of the composite wave will be the same as the single wave.

Two waves, each of amplitude 1.5 mm and frequency 10 Hz, are travelling in opposite direction with a speed of 20 mm/s. The distance in mm between adjacent nodes is : (1) 1.0 (2) 1.2 (3) 1.5 (4) 2.0

Description : Two waves, each of amplitude 1.5 mm and frequency 10 Hz, are travelling in opposite direction with a speed of 20 mm/s. The distance in mm between adjacent nodes is : (1) 1.0 (2) 1.2 (3) 1.5 (4) 2.0

Last Answer : 2mm

In slump test, each layer of concrete is compacted by a steel rod 60 cm long and of 16 mm diameter for (A) 20 times (B) 25 times (C) 30 times (D) 50 time

Description : In slump test, each layer of concrete is compacted by a steel rod 60 cm long and of 16 mm diameter for (A) 20 times (B) 25 times (C) 30 times (D) 50 time

Last Answer : Answer: Option B

In the first year of life, a human baby crawls about how many km. Crossing the distance ?

Description : In the first year of life, a human baby crawls about how many km. Crossing the distance ?

Last Answer : In the first year of life, a human baby crawls a distance of about 40 km.

Hemant sold 10 sarees for a total profit of Rs. 460 and 12 sarees for a total profit of Rs. 144. At what profit per saree should he sell the remaining 20 sarees so that he gets an average profit of Rs. 18 per sarees? A. Rs 7.10 B. Rs 7.60 C. Rs 7.99 D. Rs 8

Description : Hemant sold 10 sarees for a total profit of Rs. 460 and 12 sarees for a total profit of Rs. 144. At what profit per saree should he sell the remaining 20 sarees so that he gets an average profit of Rs. 18 per sarees? A. Rs 7.10 B. Rs 7.60 C. Rs 7.99 D. Rs 8

Last Answer : Answer – B (Rs 7.60) Explanation – Total profit required = Rs.(42 x 18) = Rs.756 Profit on 22 sarees = Rs. (460 + 144) = Rs. 604 Profit on 20 sarees = Rs. (756 – 604) = Rs. 152 Average profit on these sarees = Rs.(152/20) = Rs. 7.60

Which of the following ranges identifies the amount of pressure within the endotracheal tube cuff that is believed to prevent both injury and aspiration? a) 20-25 mm Hg water pressure. Usually the pressure is maintained at less than 25 cm water pressure to prevent injury and at more than 20 cm water pressure to prevent aspiration. b) 10-15 mm Hg water pressure. A measure of 10–15 mm Hg water pressure would indicate that the cuff is underinflated. c) 30-35 mm Hg water pressure. A measure of 30–35 mm Hg water pressure would indicate that the cuff is overinflated. d) 0-5 mm Hg water pressure A measure of 0-5 mm Hg water pressure would indicate that the cuff is underinflated.

Description : Which of the following ranges identifies the amount of pressure within the endotracheal tube cuff that is believed to prevent both injury and aspiration? a) 20-25 mm Hg water pressure. Usually the ... pressure A measure of 0-5 mm Hg water pressure would indicate that the cuff is underinflated.

Last Answer : a) 20-25 mm Hg water pressure. Usually the pressure is maintained at less than 25 cm water pressure to prevent injury and at more than 20 cm water pressure to prevent aspiration.

If the width of a pavement slab is 7.5 m, thickness 20 cm and working stress 1400 kg/cm2 , spacing of 10 mm tie bars for the longitudinal joint, is (A) 10 cm (B) 20 cm (C) 30 cm (D) 40 cm

Description : If the width of a pavement slab is 7.5 m, thickness 20 cm and working stress 1400 kg/cm2 , spacing of 10 mm tie bars for the longitudinal joint, is (A) 10 cm (B) 20 cm (C) 30 cm (D) 40 cm

Last Answer : Answer: Option C

The diameter of the Vicat plunger is 10 mm and its length varies from (A) 20 mm to 30 mm (B) 30 mm to 40 mm (C) 40 mm to 50 mm (D) 50 mm to 60 mm

Description : The diameter of the Vicat plunger is 10 mm and its length varies from (A) 20 mm to 30 mm (B) 30 mm to 40 mm (C) 40 mm to 50 mm (D) 50 mm to 60 mm

Last Answer : Answer: Option C

A dash pot consists of a cylinder 10 cm in diameter in which slides a piston 12 cm long having a radial clearance of 1 mm. The cylinder is filled with oil having a viscosity of 1 poise. What will be the resistance offered by the piston to sliding with a velocity of 3 cm/sec a.1090 kg b.100 kg c.10900 kg d.10 kg e.50 kg

Description : A dash pot consists of a cylinder 10 cm in diameter in which slides a piston 12 cm long having a radial clearance of 1 mm. The cylinder is filled with oil having a viscosity of 1 poise. What will be the resistance offered ... with a velocity of 3 cm/sec a.1090 kg b.100 kg c.10900 kg d.10 kg e.50 kg

Last Answer : c. 10900 kg

In case of Raymond pile (A) Lengths vary from 6 m to 12 m (B) Diameter of top of piles varies from 40 cm to 60 cm (C) Diameter of pile at bottom varies from 20 cm to 28 cm (D) All the above

Description : In case of Raymond pile (A) Lengths vary from 6 m to 12 m (B) Diameter of top of piles varies from 40 cm to 60 cm (C) Diameter of pile at bottom varies from 20 cm to 28 cm (D) All the above

Last Answer : Answer: Option D

If the original scale of a negative is 1 : 10,000, the ground resolution, considering that we get nearly 20 lines pair per mm, will be : (a) 50 mm (b) 20 cm (c) 2 m (d) 25 cm

Description : If the original scale of a negative is 1 : 10,000, the ground resolution, considering that we get nearly 20 lines pair per mm, will be : (a) 50 mm (b) 20 cm (c) 2 m (d) 25 cm

Last Answer : (d) 25 cm

Angular velocity of second hand of clock is 0.105 rad s-1 and length of hand is 1.8 cm, then speed of tip of hand is A. 0.189 cm s-1 B. 1 cm s-1 C. 0.189 m s-1 D. 2 m s-1

Description : Angular velocity of second hand of clock is 0.105 rad s-1 and length of hand is 1.8 cm, then speed of tip of hand is A. 0.189 cm s-1 B. 1 cm s-1 C. 0.189 m s-1 D. 2 m s-1

Last Answer : 0.189 cm s-1

Water flow to a terminal 3 mm diameter and has an average speed of 2 m/s. What is the rate of flow in cubic meter/mm?  a. 0.0001m³/min  b. 0.076 m³/min  c. 0.085 m³/min  d. 0.097 m³/min

Description : Water flow to a terminal 3 mm diameter and has an average speed of 2 m/s. What is the rate of flow in cubic meter/mm?  a. 0.0001m³/min  b. 0.076 m³/min  c. 0.085 m³/min  d. 0.097 m³/min

Last Answer : 0.085 m³/min

While traveling in a straight line, a car uniformly changes its speed from 50 kilometers per hour to 110 kilometers per hour in 5 seconds. The acceleration of the car during this time is: w) 5 kilometers per hour per second x) 12 kilometers per hour per second y) 50 kilometers per hour per second z) 60 kilometers per hour per second

Description : While traveling in a straight line, a car uniformly changes its speed from 50 kilometers per hour to 110 kilometers per hour in 5 seconds. The acceleration of the car during this time is: w) 5 ... per hour per second y) 50 kilometers per hour per second z) 60 kilometers per hour per second

Last Answer : ANSWER: X -- 12 KILOMETERS PER HOUR PER SECOND

Liquid A and liquid B exert same amount of pressure on each other, but the density of A is twice the density of B. The height of liquid B is 10 cm, then the height of liquid A would be A. 5 cm B. 10 cm C. 20 cm D. 40 cm

Description : Liquid A and liquid B exert same amount of pressure on each other, but the density of A is twice the density of B. The height of liquid B is 10 cm, then the height of liquid A would be A. 5 cm B. 10 cm C. 20 cm D. 40 cm

Last Answer : 5 cm

An intense rain is falling at a uniform rate of 7.5 cm/hour for a period of 60 minutes on a basin whose area is 500 hectares. If the average infiltration capacity during the entire rain period is assumed to be 1.5 cm/hr, the maximum run-off rate based on 10 minute peak percentage of 16% from distributing graph of the basin, is (A) 40 cumecs (B) 60 cumecs (C) 80 cumecs (D) 100 cumecs

Description : An intense rain is falling at a uniform rate of 7.5 cm/hour for a period of 60 minutes on a basin whose area is 500 hectares. If the average infiltration capacity during the entire rain period is assumed to be 1.5 ... of the basin, is (A) 40 cumecs (B) 60 cumecs (C) 80 cumecs (D) 100 cumecs

Last Answer : Answer: Option C

If you walk towards a plane mirror at a speed of 10 cm/s, at what speed does your image approach you? (a) 5 cm/s (b) 10 cm/s (c) 20 cm/s (d) Information inadequate

Description : If you walk towards a plane mirror at a speed of 10 cm/s, at what speed does your image approach you? (a) 5 cm/s (b) 10 cm/s (c) 20 cm/s (d) Information inadequate

Last Answer : Ans:(c)

If aggregates completely pass through a sieve of size 75 mm and are retained on a sieve of size 60 mm, the particular aggregate will be flaky if its minimum dimension is less than (A) 20.5 mm (B) 30.5 mm (C) 40.5 mm (D) 50.5 mm

Description : If aggregates completely pass through a sieve of size 75 mm and are retained on a sieve of size 60 mm, the particular aggregate will be flaky if its minimum dimension is less than (A) 20.5 mm (B) 30.5 mm (C) 40.5 mm (D) 50.5 mm

Last Answer : Answer: Option C

Smoke point of a good burning kerosene may be around __________ mm. (A) 0-5 (B) 20-25 (C) 60-75 (D) 100-120

Description : Smoke point of a good burning kerosene may be around __________ mm. (A) 0-5 (B) 20-25 (C) 60-75 (D) 100-120

Last Answer : (B) 20-25

If a steel rod of 20 mm diameter and 5 metres long elongates by 2.275 mm when subjected to an axial pull of 3000 kg, the stress developed, is (A) 9.5541 kg/cm2 (B) 95.541 kg/cm2 (C) 955.41 kg/cm2 (D) 9554.1 kg/cm

Description : If a steel rod of 20 mm diameter and 5 metres long elongates by 2.275 mm when subjected to an  axial pull of 3000 kg, the stress developed, is  (A) 9.5541 kg/cm2 (B) 95.541 kg/cm2 (C) 955.41 kg/cm2 (D) 9554.1 kg/cm

Last Answer : (C) 955.41 kg/cm2

If a steel rod of 20 mm diameter and 5 metres long elongates by 2.275 mm when subjected to an axial pull of 3000 kg, the stress developed, is (A) 9.5541 kg/cm2 (B) 95.541 kg/cm2 (C) 955.41 kg/cm2 (D) 9554.1 kg/cm

Description : If a steel rod of 20 mm diameter and 5 metres long elongates by 2.275 mm when subjected to an  axial pull of 3000 kg, the stress developed, is  (A) 9.5541 kg/cm2 (B) 95.541 kg/cm2 (C) 955.41 kg/cm2 (D) 9554.1 kg/cm

Last Answer : (C) 955.41 kg/cm2

A jet of water of cross-sectional area 20 sq. cm impinges on a plate at an angle of 60? with a velocity of 10 m/sec. Neglecting the friction between the jet and plate (density of water 1000/9.81 kgm-1 sec2 per cubic meter), the force exerted by the jet on the plate would be in the range a.15 - 20 kg b.20 - 25 kg c.5 - 10 kg d.25 - 30 kg e.10 - 15 kg

Description : A jet of water of cross-sectional area 20 sq. cm impinges on a plate at an angle of 60? with a velocity of 10 m/sec. Neglecting the friction between the jet and plate (density of water 1000/9.81 kgm-1 sec2 per cubic meter), the ... a.15 - 20 kg b.20 - 25 kg c.5 - 10 kg d.25 - 30 kg e.10 - 15 kg

Last Answer : a. 15 - 20 kg

A compound bar consists of two bars of equal length. Steel bar cross-section is 3500 mm2 and that of brass bar is 3000 mm2 . These are subjected to a compressive load 100,000 N. If Eb = 0.2 MN/mm2 and Eb = 0.1 MN/mm2 , the stresses developed are: (A) b = 10 N/mm2s = 20 N/mm2(B) b = 8 N/mm2s = 16 N/mm2(C) b = 6 N/mm2s = 12 N/mm2(D) b = 5 N/mm2s = 10 N/mm

Description : A compound bar consists of two bars of equal length. Steel bar cross-section is 3500 mm2 and that  of brass bar is 3000 mm2 . These are subjected to a compressive load 100,000 N. If Eb = 0.2  MN/mm2  and Eb = 0.1 ... 6 N/mm2 s  = 12 N/mm2 (D) b = 5 N/mm2 s  = 10 N/mm

Last Answer : (A) b = 10 N/mm2 s  = 20 N/mm

A steel bar 20 mm in diameter simply-supported at its ends over a total span of 40 cm carries a load at its centre. If the maximum stress induced in the bar is limited to N/mm2, the bending strain energy stored in the bar, is (A) 411 N mm (B) 511 N mm (C) 611 N mm (D) 711 N mm

Description : A steel bar 20 mm in diameter simply-supported at its ends over a total span of 40 cm carries a  load at its centre. If the maximum stress induced in the bar is limited to N/mm2, the bending  strain energy stored in the ... (A) 411 N mm  (B) 511 N mm  (C) 611 N mm  (D) 711 N mm 

Last Answer : (C) 611 N mm 

An R.C.C. column of 30 cm diameter is reinforced with 6 bars 12 mm placed symmetrically along the circumference. If it carries a load of 40, 000 kg axially, the stress is (A) 49.9 kg/cm2 (B) 100 kg/cm2 (C) 250 kg/cm2 (D) 175 kg/cm

Description : An R.C.C. column of 30 cm diameter is reinforced with 6 bars 12 mm placed symmetrically along the circumference. If it carries a load of 40, 000 kg axially, the stress is (A) 49.9 kg/cm2 (B) 100 kg/cm2 (C) 250 kg/cm2 (D) 175 kg/cm

Last Answer : Answer: Option A

For reinforced concrete work, aggregates having a nominal size of -------- are generally used [ A ] 20 mm [ B ] 40 mm [ C ] 50 mm [ D ] 60 mm

Description : For reinforced concrete work, aggregates having a nominal size of -------- are generally used [ A ] 20 mm [ B ] 40 mm [ C ] 50 mm [ D ] 60 mm

Last Answer : [ A ] 20 mm

A close-coiled helical spring of stiffness 30 N/mm is arranged in series with another such spring of stiffness 60 N/mm. The stiffness of composite unit is (a) 20 N/mm (b) 30 N/mm (c) 45 N/mm (d) 90 N/mm

Description : A close-coiled helical spring of stiffness 30 N/mm is arranged in series with another such spring of stiffness 60 N/mm. The stiffness of composite unit is (a) 20 N/mm (b) 30 N/mm (c) 45 N/mm (d) 90 N/mm

Last Answer : (a) 20 N/mm

A uniformly distributed load of 20 kN/m acts on a simply supported beam of rectangular cross section of width 20 mm and depth 60 mm. What is the maximum bending stress acting on the beam of 5m? a. 5030 Mpa b. 5208 Mpa c. 6600 Mpa d. Insufficient data

Description : A uniformly distributed load of 20 kN/m acts on a simply supported beam of rectangular cross section of width 20 mm and depth 60 mm. What is the maximum bending stress acting on the beam of 5m? a. 5030 Mpa b. 5208 Mpa c. 6600 Mpa d. Insufficient data

Last Answer : b. 5208 Mpa

What is the difference between rail flange of 60 kg & 52 rail section a. 20 mm b. 18 mm c. 14 mm* d. 16 mm

Description : What is the difference between rail flange of 60 kg & 52 rail section a. 20 mm b. 18 mm c. 14 mm* d. 16 mm

Last Answer : c. 14 mm

A copper wire 4 mm in diameter is evenly wound about a cylinder whose length is 24 cm and diameter 20 cm so as to cover the surface. -Maths 9th

Description : A copper wire 4 mm in diameter is evenly wound about a cylinder whose length is 24 cm and diameter 20 cm so as to cover the surface. -Maths 9th

Last Answer : answer:

Two concave lenses of 60 cm focal length are cemented on either side of a convex lens of 15 cm focal length. The focal length of the combination is (A) 10 cm (B) 20 cm (C) 30 cm (D) 40 cm

Description : Two concave lenses of 60 cm focal length are cemented on either side of a convex lens of 15 cm  focal length. The focal length of the combination is  (A) 10 cm  (B) 20 cm  (C) 30 cm  (D) 40 cm 

Last Answer : (C) 30 cm 

Knife clips are placed with wearing plates spaced from cm apart. A) 10-20cm B) 60-90cm C) 15-25cm D) 20-30cm

Description : Knife clips are placed with wearing plates spaced from cm apart. A) 10-20cm B) 60-90cm C) 15-25cm D) 20-30cm

Last Answer :  20-30cm

The minimum diameter of longitudinal steel should be [ A ] 10 mm [ B ] 12 mm [ C ] 16 mm [ D ] 20 mm

Description : The minimum diameter of longitudinal steel should be [ A ] 10 mm [ B ] 12 mm [ C ] 16 mm [ D ] 20 mm

Last Answer : [ B ] 12 mm

From distribution main of 50 mm size, number of service pipes of 15 mm size can be taken off are ------ a) 6 b)10 c) 12 e):20*

Description : From distribution main of 50 mm size, number of service pipes of 15 mm size can be taken off are ------ a) 6 b)10 c) 12 e):20*

Last Answer : e):20*

From the distribution main of 40 mm size, number of service pipe of 20 mm size can be taken off are ------- a)3 B) 6* c) 10 d) 12

Description : From the distribution main of 40 mm size, number of service pipe of 20 mm size can be taken off are ------- a)3 B) 6* c) 10 d) 12

Last Answer : B) 6*

A train covers the first half of the distance between two stations with a speed of 40 km/h and the other half with 60 km/h. Then its average speed is

Description : A train covers the first half of the distance between two stations with a speed of 40 km/h and the other half with 60 km/h. Then its average speed is

Last Answer : A train covers the first half of the distance between two stations with a speed of 40 km/h and the other half with ... 48 km/h C. 52 km/h D. 100 km/h

A snail drew an s on his car. Why? -Riddles

Description : A snail drew an s on his car. Why? -Riddles

Last Answer : So people can see the S CAR GO.

An electron is travelling at right angles to a uniform magnetic field of flux density 1.2 mT with a speed of 8 × 106 m s-1, the radius of circular path followed by electron is A. 3.8 cm B. 3.7 cm C. 3.6 cm D. 3.5 cm

Description : An electron is travelling at right angles to a uniform magnetic field of flux density 1.2 mT with a speed of 8 × 106 m s-1, the radius of circular path followed by electron is A. 3.8 cm B. 3.7 cm C. 3.6 cm D. 3.5 cm

Last Answer : 3.8 cm

Mean drift velocity of electron in a copper wire having cross-sectional area 5.0 × 10-6 m2 carrying current of 1 A and having number density 8.5 × 1028 m3 is A. 0.015 mm s-1 B. 0.1 mm s-1 C. 0.5 mm s-1 D. 0.25 mm s-1

Description : Mean drift velocity of electron in a copper wire having cross-sectional area 5.0 × 10-6 m2 carrying current of 1 A and having number density 8.5 × 1028 m3 is A. 0.015 mm s-1 B. 0.1 mm s-1 C. 0.5 mm s-1 D. 0.25 mm s-1

Last Answer : 0.015 mm s-1

A straight wire of length 0.20 m moves at a steady speed of 3.0 m s-1 at right angles to the magnetic field of flux density 0.10 T. The e.m.f induced across ends of wire is A. 0.5 V B. 0.06 V C. 0.05 V D. 0.04 V

Description : A straight wire of length 0.20 m moves at a steady speed of 3.0 m s-1 at right angles to the magnetic field of flux density 0.10 T. The e.m.f induced across ends of wire is A. 0.5 V B. 0.06 V C. 0.05 V D. 0.04 V

Last Answer : 0.06 V

A bed of spherical particles (specific gravity 2.5) of uniform size 1500 μm is 0.5 m in diameter and 0.5 m high. In packed bed state, the porosity may be taken as 0.4. Ergun's equation for the above fluid-particle system (in SI units) is given below : Δ P/L = 375 × 10 3 VOM + 10.94 × 10 6 V2 OM (SI units) If water is to be used as the fluidising medium, the minimum fluidisation velocity, VOM is (A) 12 mm/s (B) 16 mm/s (C) 24 mm/s (D) 28 mm/s

Description : A bed of spherical particles (specific gravity 2.5) of uniform size 1500 μm is 0.5 m in diameter and 0.5 m high. In packed bed state, the porosity may be taken as 0.4. Ergun's equation for the above fluid-particle ... fluidisation velocity, VOM is (A) 12 mm/s (B) 16 mm/s (C) 24 mm/s (D) 28 mm/s

Last Answer : (B) 16 mm/s

In a post graduate examination the marks obtained by a student is 75 per paper. If he had obtained 33 marks more in Evs paper & 27 more marks in science paper, then his average per paper is increased by 3 marks. Then how many papers were there in exam? A) 10 B) 12 C) 14 D) 20

Description : In a post graduate examination the marks obtained by a student is 75 per paper. If he had obtained 33 marks more in Evs paper & 27 more marks in science paper, then his average per paper is increased by 3 marks. Then how many papers were there in exam? A) 10 B) 12 C) 14 D) 20

Last Answer : Answer: D)  Let the number of paper be A. Then total marks earned him = 75A from questions, 75A + 33+ 27= 78A 3A = 60=> A=20 = number of subjects

The density of lead is 12 grams per cm3. A lead brick has a mass of 1.5 kilograms. Its dimensions are 10 cm by 5 cm by 4 cm. Is it: w) More than 75% hollow x) Between 50 and 75% hollow y) Between 25 and 50% hollow z) Between 0 and 25% hollow

Description : The density of lead is 12 grams per cm3. A lead brick has a mass of 1.5 kilograms. Its dimensions are 10 cm by 5 cm by 4 cm. Is it: w) More than 75% hollow x) Between 50 and 75% hollow y) Between 25 and 50% hollow z) Between 0 and 25% hollow

Last Answer : ANSWER: Y -- BETWEEN 25 AND 50% HOLLOW

The speed of light in air is – (1) 3 x 10⁸ m/s (2) 3 x 10⁻⁸ cm/s (3) 8 x 10³ m/s (4) Infinity

Description : The speed of light in air is – (1) 3 x 10⁸ m/s (2) 3 x 10⁻⁸ cm/s (3) 8 x 10³ m/s (4) Infinity

Last Answer : (1) 3 x 10⁸ m/s Explanation: Speed of light (in Media) = Speed of Light (in Vacuum) / Refreactive Index of Material. Speed of light in air as taken generally is 3 X 10 power 8 meter per second.

If the phase difference between two points is 120° for a wave with velocity of 360 m/ and frequency 500 Hz, then path difference between the two points is – (1) 1 cm (2) 6 cm (3) 12 cm (4) 24 cm

Description : If the phase difference between two points is 120° for a wave with velocity of 360 m/ and frequency 500 Hz, then path difference between the two points is – (1) 1 cm (2) 6 cm (3) 12 cm (4) 24 cm

Last Answer : (4) 24 cm