Description : Is the total useful information processed or communicated over a specific amount of time A. Baud rate B. Bit rate C. Information theory D. Throughput
Last Answer : D. Throughput
Description : The maximum throughput for pure ALOHA is________per cent. A) 12.2 B) 18.4 C) 36.8 D) none of the above
Last Answer : 18.4
Description : When propagationspeed is multiplied by propagation time, we get the ________. A) throughput B) wavelength of thesignal C) distortionfactor D) distancea signal or bit has traveled
Last Answer : distancea signal or bit has traveled
Description : Undercharging of coal in the by-product coke ovens results in (A) Decrease in the c.v. of coke oven gas (B) Increase in its throughput (C) Increase in the c.v. of coke oven gas
Last Answer : (A) Decrease in the c.v. of coke oven gas
Description : A network with bandwidth of 10 Mbps can pass only an average of 12,000 frames per minute with each frame carrying an average of 10,000 bits. What is the throughput of this network ? a. 1 Mbps b. 2 Mbps c. 10 Mbps d. 12 Mbps
Last Answer : b. 2 Mbps
Description : A network with bandwidth of 10 Mbps can pass only an average of 15,000 frames per minute with each frame carrying an average of 8,000 bits. What is the throughput of this network? a. 2 Mbps b. 60 Mbps c. 120 Mbps
Last Answer : a. 2 Mbps
Description : A pure ALOHA Network transmits 200 bit frames using a shared channel with 200 Kbps bandwidth. If the system (all stations put together) produces 500 frames per second, then the throughput of the system is ______. a. 0.384 b. 0.184 c. 0.286 d. 0.58
Last Answer : b. 0.184
Description : A sender uses the Stop-and-Wait ARQ protocol for reliable transmission of frames. Frames are of size 1000 bytes and the transmission rate at the sender is 80 Kbps (1Kbps = 1000 bits/second). Size of ... is lost, the sender throughput is __________ bytes/second. a. 2500 b. 2000 c. 1500 d. 500
Last Answer : a. 2500
Description : While transferring files between server and client, if the transmission rates along the path is 10Mbps, 20Mbps, 30Mbps, 40Mbps. The throughput is usually a. 20Mbps b. 10Mbps c. 40Mbps d. 50Mbps
Last Answer : b. 10Mbps
Description : In a network, when the load is below the capacity of the network, the throughput ______________ A. increases sharply B. increases proportionally with the load C. declines sharply D. declines proportionally with the load
Last Answer : B. increases proportionally with the load
Description : In a network, after the load reaches the capacity,throughput _______. A. increases sharply B. increases proportionally with the load C. declines sharply D. declines proportionally with the load
Last Answer : C. declines sharply
Description : What are the advantages of HDFS federation in Hadoop? a) Isolation b) Namespace scalability c) Improves throughput d) All of the above
Last Answer : All of the above
Description : The ____ of can assembly line to be I/t p: a. Clock period b. Pipelining c. Throughput d. Flow through
Last Answer : c. Throughput
Description : Who is the determined by the time taken by the stages the requires the most processing time: a. Clock period b. Flow through c. Throughput d. None of these
Last Answer : a. Clock period
Description : Ti is the time taken for the ith stage and there are n stages in the: a. Throughput b. Assembly line c. Both A and B d. None of these
Last Answer : b. Assembly line
Description : The time taken for all stages of the assembly line to become active is called the: a. Flow through time b. Clock period c. Throughput d. All of these
Last Answer : a. Flow through time
Description : How much water is lost through a commercial cooling tower system with a throughput of about 600 GPM?
Last Answer : This question depends on many factors. It sounds like the tower is small. A rule of thumb suggests that the tower will see an evaporation loss of about 0.1% of the circulation flowrate for each ... and blow down. Blow down is simply a purge of tower water to prohibit the buildup of solids.
Description : _____ is suitable for IOT applications to have low latency or high throughput requirements. A. REST B. Publish-Subscriber C. Push-Pull D. WebSocket
Last Answer : D. WebSocket
Description : The .............. measures the relative strengths of two signals or a signal at two different points. (A) frequency (B) attenuation (C) throughput (D) decibel
Last Answer : (D) decibel
Description : A network with bandwidth of 10 Mbps can pass only an average of 15,000 frames per minute with each frame carrying an average of 8,000 bits. What is the throughput of this network ? (A) 2 Mbps (B) 60 Mbps (C) 120 Mbps (D) 10 Mbps
Last Answer : (A) 2 Mbps Explanation: In data transmission, throughput is the amount of data moved successfully from one place to another in a given period of time, and typically measured in bits per second (bps), ... second (Mbps) or gigabits per second (Gbps). Here, Throughput = 15000 x 8000/60 = 2 Mbps
Description : A pure ALOHA Network transmit 200 bit frames using a shared channel with 200 Kbps bandwidth. If the system (all stations put together) produces 500 frames per second, then the throughput of the system is .............. (A) 0.384 (B) 0.184 (C) 0.286 (D) 0.586
Last Answer : (B) 0.184
Description : A network with bandwidth of 10 Mbps can pass only an average of 12,000 frames per minute with each frame carrying an average of 10,000 bits. What is the throughput of this network ? (A) 1 Mbps (B) 2 Mbps (C) 10 Mbps (D) 12 Mbps
Last Answer : (B) 2 Mbps