Description : ..................... is a type of transmission impairment in which the signal loses strength due to the resistance of the transmission medium. (A) Attenuation (B) Distortion (C) Noise (D) Decibel
Last Answer : (A) Attenuation
Description : ________ is a typeof transmission impairment in which the signal loses strength due to the different propagation speeds of each frequency that makes up the signal. A) Attenuation B) Distortion C) Noise D) Decibel
Last Answer : Distortion
Description : ________ is a typeof transmission impairment in which the signal loses strength due to theresistance of the transmission medium. A) Attenuation B) Distortion C) Noise D) Decibel
Last Answer : Attenuation
Description : The loss in signal power as light travels down the fiber is called ............. A) Attenuation B) Propagation C) Scattering D) Interruption
Last Answer : A) Attenuation
Description : _______ is a typeof transmission impairment in which an outside sourcesuch as crosstalk corrupts asignal. A) Attenuation B) Distortion C) Noise D) Decibel
Last Answer : Noise
Description : A network with bandwidth of 10 Mbps can pass only an average of 15,000 frames per minute with each frame carrying an average of 8,000 bits. What is the throughput of this network ? (A) 2 Mbps (B) 60 Mbps (C) 120 Mbps (D) 10 Mbps
Last Answer : (A) 2 Mbps Explanation: In data transmission, throughput is the amount of data moved successfully from one place to another in a given period of time, and typically measured in bits per second (bps), ... second (Mbps) or gigabits per second (Gbps). Here, Throughput = 15000 x 8000/60 = 2 Mbps
Description : A pure ALOHA Network transmit 200 bit frames using a shared channel with 200 Kbps bandwidth. If the system (all stations put together) produces 500 frames per second, then the throughput of the system is .............. (A) 0.384 (B) 0.184 (C) 0.286 (D) 0.586
Last Answer : (B) 0.184
Description : A network with bandwidth of 10 Mbps can pass only an average of 12,000 frames per minute with each frame carrying an average of 10,000 bits. What is the throughput of this network ? (A) 1 Mbps (B) 2 Mbps (C) 10 Mbps (D) 12 Mbps
Last Answer : (B) 2 Mbps
Description : A telephone cable has following primary constants per loop kilometer ,R=30Ω, L=20mH,C=0.06µF,G=0.If the applied signal has an angular frequency of 5000 rad/sec.., Determine (i) Characteristics impedence (ii) Attenuation constant
Last Answer : A telephone cable has following primary constants per loop kilometer ,R=30Ω, L=20mH,C=0.06µF,G=0.If the applied signal has an angular frequency of 5000 rad/sec.., Determine (i) Characteristics impedence (ii) Attenuation constant
Description : Given the following statements: (a) Frequency Division Multiplexing is a technique that can be applied when the bandwidth of a link is greater than combined bandwidth of signals to be transmitted. (b) Wavelength Division Multiplexing (WDM) ... c) is true. (D) (a), (b) and (d) are true; (c) is false.
Last Answer : (D) (a), (b) and (d) are true; (c) is false.
Description : When propagationspeed is multiplied by propagation time, we get the ________. A) throughput B) wavelength of thesignal C) distortionfactor D) distancea signal or bit has traveled
Last Answer : distancea signal or bit has traveled
Description : Suppose a digitized voice channel is made by digitizing 8 kHz bandwidth analog voice signal. It is required to sample the signal at twice the highest frequency (two samples per hertz). What is the bit rate required, if it ... sample requires 8 bits? (A) 32 kbps (B) 64 kbps (C) 128 kbps (D) 256 kbps
Last Answer : (C) 128 kbps
Description : The period of a signal is 10 ms. What is its frequency in Hertz ? (A) 10 (B) 100 (C) 1000 (D) 10000
Last Answer : (B) 100
Description : _________ is the random and unpredictable electric signals from natural causes, both internal and external to the system. A. Interference B. Attenuation C. Distortion D. Noise
Last Answer : D. Noise
Description : Decibel is the unit used for – (1) Speed of light (2) Intensity of heat (3) Intensity of sound (4) Radio wave frequency
Last Answer : (3) Intensity of sound Explanation: The decibel (abbreviated dB) is the unit used to measure the intensity of a sound. The decibel scale is a little odd because the human ear is incredibly ... of a physical quantity (usually power or intensity) relative to a specified or implied reference level.
Description : Describe the -3 decibel (dB) optical power frequency (f3dB).
Last Answer : The -3 decibel (dB) is the lowest frequency at which the magnitude of the fiber frequency response has decreased to one half its zero-frequency value.
Description : Decibel is the unit used for (1) Speed of light (2) Intensity of heat (3) Intensity of sound (4) Radio wave frequency
Last Answer : Intensity of sound
Description : Strengths and Weaknesses of a Company are determined relative to it’s Competitors
Last Answer : True
Description : ------------- are the Resources, Skills and other advantages a Company enjoys relative to it’s competitors : A. Weaknesses B. Strengths C. Threats D. Opportunities
Last Answer : Strengths
Description : ECE Board Exam March 1996 What is the purpose of a beat frequency oscillator (BFO)? A. Aid in the reception of weak voice-modulated signals B. Generates a signal, whose frequency is the ... reception D. Generates an output, whose frequency differs from that of the intermediate frequency by 1 kHz
Last Answer : C. Generates a 1kHz note for Morse code reception
Description : Reduction of signal strength during transmission is called attenuation. -Technology
Last Answer : TrueDuring transmission, the signal strength is reduced, this phenomenon is called attenuation.
Description : The loss in signal power as light travels down a fiber is called a. Dispersion b. Scattering c. Absorption d. Attenuation
Last Answer : d. Attenuation
Description : The random and unpredictable electric signal from natural causes, both internal and external to the system is know as ________. A. Distortion B. Noise C. Attenuation D. Interference
Last Answer : B. Noise
Description : ECE Board Exam November 1996 The loss in signal power as light travels down a fiber is A. attenuation B. propagation C. absorption D. scattering
Last Answer : A. attenuation
Description : Phenomena in which signal transmitted in one circuit creates undesired effect in other circuit is known as A. crosstalk B. signal attenuation C. sampling D. crosslinking
Last Answer : crosslinking
Description : Decrease in strength of signal is known as A. tuning B. modulation C. attenuation D. amplification
Last Answer : attenuation
Description : The loss in signal power as light travels down the fiber is called a. attenuation b. progragation c. scattering d. interruption
Description : _________can impair a signal. A) Attenuation B) Distortion C) Noise D) All of theabove
Last Answer : All of theabove
Description : Attenuation and noise can impair a signal. True False
Description : If the length of the fiber point defect changes with pulse duration, is the OTDR signal deviation a point defect or a region of high fiber attenuation?
Last Answer : A point defect.
Description : Why are visible-light LEDs not used for fiber optics? ∙ a. It has high losses ∙ b. It has short wave ∙ c. It has low attenuation ∙ d. It has weak signal
Last Answer : ∙ a. It has high losses
Description : Band loss is ∙ a. A reduction in transmitter power caused by earth’s surface curvature ∙ b. A reduction in strength of the signal caused by folded dipole bends ∙ c. An attenuation increase caused by bends radiating from the side of the fiber ∙ d. All of these
Last Answer : c. An attenuation increase caused by bends radiating from the side of the fiber
Description : The loss in signal power as light travels down a fiber is called ∙ a. Dispersion ∙ b. Scattering ∙ c. Absorption ∙ d. Attenuation
Last Answer : ∙ d. Attenuation
Description : Pick out the wrong statement pertaining to the properties of glasses. Glasses generally have (A) High electrical insulation properties (B) Sharp melting points (C) Low co-efficient of thermal expansion (D) Compressive strength much greater than their tensile strengths
Last Answer : (B) Sharp melting points
Description : With respect to LIM propelled railway traction system state points of; i) Strengths of LIM ii) Weaknesses of LIM
Last Answer : Strengths of LIM propelled railway traction: 1) Pull produced for propelling the system is independent of adhesion between the wheels of motorized coach and rail. 2) No driving wheels and hence no ... traction is single phase ac power inverters are needed for operation of LIM this adds to cost.
Description : A network that needs human beings to manually route signals is called.... A) Fiber Optic Network B) Bus Network C) T-switched network D) Ring network
Last Answer : C) T-switched network
Description : The ............ layer change bits onto electromagnetic signals. A) Physical B) Transport C) Data Link D) Presentation
Last Answer : A) Physical
Description : Ten signals, each requiring 3000 Hz, are multiplexed on to a single channel using FDM. How much minimum bandwidth is required for the multiplexed channel ? Assume that the guard bands are 300 Hz wide. (A) 30,000 (B) 32,700 (C) 33,000 (D) None of the above
Last Answer : (B) 32,700
Description : Fact-less fact table in a data warehouse contains (A) only measures (B) only dimensions (C) keys and measures (D) only surrogate keys
Last Answer : (D) only surrogate keys
Description : What is the required quality factor for an SSB filter with the following data: center frequency= 1 MHz, the desired attenuation level of the unwanted sideband= 80 dB and the separation between sidebands= 200 Hz? A. 1,250 B. 12,500 C. 125,000 D. 25,000
Last Answer : C. 125,000
Description : What is the current frequency band given most attenuation for satellite communications? A. Ku B. C band C. J D. P
Last Answer : A. Ku
Description : What is the path attenuation between transmitter and receiver at a frequency of 1.2 Ghz and a distance of 11,000 mi? A. 119 dB B. 115dB C. 179dB D. 174dB
Last Answer : C. 179dB
Description : What frequency does oxygen causes excessive attenuation A. 119 GHz B. 183 GHz C. 310 GHz D. 60 GHz
Last Answer : D. 60 GHz
Description : Calculate the attenuation constant of a conductor of conductivity 200 units, frequency 1M radian/s in air. a) 11.2 b) 1.12 c) 56.23 d) 5.62
Last Answer : a) 11.2
Description : Is the attenuation of a coaxial cable independent of frequency?
Last Answer : No.
Description : In electronic circuits, what name is given to a frequency discriminating network designed to select or pass certain bands of frequencies with low attenuation and cause very high attenuation to other frequencies?
Last Answer : ANSWER: FILTER
Description : Consider the formula in image processing RD = 1 - (1/CR) Where CR = n1/n2 CR is called as compression ratio n1 and n2 denotes the number of information carrying units in two datasets that represent ... . (A) Data Compression (B) Data Redundancy (C) Data Relation (D) Data Representation
Last Answer : (B) Data Redundancy
Description : Which one of the following is not an addressing mode? (A) Register indirect (B) Auto increment (C) Relative indexed (D) Immediate operand
Last Answer : (C) Relative indexed