A network with bandwidth of 10 Mbps can pass only an average of 12,000 frames per minute with each frame carrying an average of 10,000 bits. What is the throughput of this network ? a. 1 Mbps b. 2 Mbps c. 10 Mbps d. 12 Mbps

A network with bandwidth of 10 Mbps can
pass only an average of 12,000 frames per
minute with each frame carrying an average
of 10,000 bits. What is the throughput of
this network ?
a. 1 Mbps
b. 2 Mbps
c. 10 Mbps
d. 12 Mbps
by

1 Answer

Answer :

b. 2 Mbps
by

Related questions

A network with bandwidth of 10 Mbps can pass only an average of 15,000 frames per minute with each frame carrying an average of 8,000 bits. What is the throughput of this network? a. 2 Mbps b. 60 Mbps c. 120 Mbps

Description : A network with bandwidth of 10 Mbps can pass only an average of 15,000 frames per minute with each frame carrying an average of 8,000 bits. What is the throughput of this network? a. 2 Mbps b. 60 Mbps c. 120 Mbps

Last Answer : a. 2 Mbps

A network with bandwidth of 10 Mbps can pass only an average of 12,000 frames per minute with each frame carrying an average of 10,000 bits. What is the throughput of this network ? (A) 1 Mbps (B) 2 Mbps (C) 10 Mbps (D) 12 Mbps

Description : A network with bandwidth of 10 Mbps can pass only an average of 12,000 frames per minute with each frame carrying an average of 10,000 bits. What is the throughput of this network ? (A) 1 Mbps (B) 2 Mbps (C) 10 Mbps (D) 12 Mbps

Last Answer : (B) 2 Mbps

A network with bandwidth of 10 Mbps can pass only an average of 15,000 frames per minute with each frame carrying an average of 8,000 bits. What is the throughput of this network ? (A) 2 Mbps (B) 60 Mbps (C) 120 Mbps (D) 10 Mbps

Description : A network with bandwidth of 10 Mbps can pass only an average of 15,000 frames per minute with each frame carrying an average of 8,000 bits. What is the throughput of this network ? (A) 2 Mbps (B) 60 Mbps (C) 120 Mbps (D) 10 Mbps

Last Answer : (A) 2 Mbps Explanation: In data transmission, throughput is the amount of data moved successfully from one place to another in a given period of time, and typically measured in bits per second (bps), ... second (Mbps) or gigabits per second (Gbps). Here, Throughput = 15000 x 8000/60 = 2 Mbps 

A pure ALOHA Network transmits 200 bit frames using a shared channel with 200 Kbps bandwidth. If the system (all stations put together) produces 500 frames per second, then the throughput of the system is ______. a. 0.384 b. 0.184 c. 0.286 d. 0.58

Description : A pure ALOHA Network transmits 200 bit frames using a shared channel with 200 Kbps bandwidth. If the system (all stations put together) produces 500 frames per second, then the throughput of the system is ______. a. 0.384 b. 0.184 c. 0.286 d. 0.58

Last Answer : b. 0.184

A sender uses the Stop-and-Wait ARQ protocol for reliable transmission of frames. Frames are of size 1000 bytes and the transmission rate at the sender is 80 Kbps (1Kbps = 1000 bits/second). Size of an acknowledgement is 100 bytes and the transmission rate at the receiver is 8 Kbps. The one-way propagation delay is 100 milliseconds. Assuming no frame is lost, the sender throughput is __________ bytes/second. a. 2500 b. 2000 c. 1500 d. 500

Description : A sender uses the Stop-and-Wait ARQ protocol for reliable transmission of frames. Frames are of size 1000 bytes and the transmission rate at the sender is 80 Kbps (1Kbps = 1000 bits/second). Size of ... is lost, the sender throughput is __________ bytes/second. a. 2500 b. 2000 c. 1500 d. 500

Last Answer : a. 2500

Determine the maximum length of the cable (in km) for transmitting data at a rate of 500 Mbps in an Ethernet LAN with frames of size 10,000 bits. Assume the signal speed in the cable to be 2,00,000 km/s.b. 2 c. 2.5 d. 5

Description : Determine the maximum length of the cable (in km) for transmitting data at a rate of 500 Mbps in an Ethernet LAN with frames of size 10,000 bits. Assume the signal speed in the cable to be 2,00,000 km/s. b. 2 c. 2.5 d. 5

Last Answer : b. 2

If link transmits 4000 frames per second and each slot has 8 bits, the transmission rate of circuit of this TDM is ______. a. 64 Kbps b. 32 Mbps c. 32 Kbps d. 64 MbpS

Description : If link transmits 4000 frames per second and each slot has 8 bits, the transmission rate of circuit of this TDM is ______. a. 64 Kbps b. 32 Mbps c. 32 Kbps d. 64 MbpS

Last Answer : c. 32 Kbps

Consider a CSMA/CD network that transmits data at a rate of 100 Mbps (108 bits per second) over a 1 km (kilometre) cable with no repeaters. If the minimum frame size required for this network is 1250 bytes, what is the signal speed (km/sec) in the cable? a. 8000 b. 10000 c. 16000 d. 20000

Description : Consider a CSMA/CD network that transmits data at a rate of 100 Mbps (108 bits per second) over a 1 km (kilometre) cable with no repeaters. If the minimum frame size required for this network is 1250 bytes, what is the signal speed (km/sec) in the cable? a. 8000 b. 10000 c. 16000 d. 20000

Last Answer : d. 20000

A 8-Mbps tokenring has atoken holding timer value of 10 msec. What is the longest frame (assumeheader bits are negligible) that canbe sent on this ring? A. 8000 B frame B. 80,000 B frame C. 8 x 105 bit frame D. 10,000 B frame

Description : A 8-Mbps tokenring has atoken holding timer value of 10 msec. What is the longest frame (assumeheader bits are negligible) that canbe sent on this ring? A. 8000 B frame B. 80,000 B frame C. 8 x 105 bit frame D. 10,000 B frame

Last Answer : 10,000 B frame

A pure ALOHA Network transmit 200 bit frames using a shared channel with 200 Kbps bandwidth. If the system (all stations put together) produces 500 frames per second, then the throughput of the system is .............. (A) 0.384 (B) 0.184 (C) 0.286 (D) 0.586

Description : A pure ALOHA Network transmit 200 bit frames using a shared channel with 200 Kbps bandwidth. If the system (all stations put together) produces 500 frames per second, then the throughput of the system is .............. (A) 0.384 (B) 0.184 (C) 0.286 (D) 0.586

Last Answer : (B) 0.184

Assume that we need to download text documents at the rate of 100 pages per minute. A page is an average of 24 lines with 80 characters in each line and each character requires 8 bits. Then the required bit rate of the channel is ................ (A) 1.636 Kbps (B) 1.636 Mbps (C) 2.272 Mbps (D) 3.272 Kbps

Description : Assume that we need to download text documents at the rate of 100 pages per minute. A page is an average of 24 lines with 80 characters in each line and each character requires 8 bits. Then the required bit rate of the channel is ... ...... (A) 1.636 Kbps (B) 1.636 Mbps (C) 2.272 Mbps (D) 3.272 Kbps

Last Answer : Answer: Marks given to all

The distance between two stations M and N is L kilometers. All frames are K bits long. The propagation delay per kilometer is t seconds. Let R bits/second be the channelcapacity. Assuming that processing delay is negligible, the minimum number of bits for the sequence number field in a frame for maximum utilization, when the sliding window protocol used is: a. A b. B c. C d. D

Description : The distance between two stations M and N is L kilometers. All frames are K bits long. The propagation delay per kilometer is t seconds. Let R bits/second be the channel capacity. Assuming that processing ... maximum utilization, when the sliding window protocol used is: a. A b. B c. C d. D

Last Answer : c. C

If link transmits 4000 frames per second and each slot has 8 bits, the transmission rate of circuit of this TDM is ............... (A) 64 Kbps (B) 32 Mbps (C) 32 Kbps (D) 64 Mbps

Description : If link transmits 4000 frames per second and each slot has 8 bits, the transmission rate of circuit of this TDM is ............... (A) 64 Kbps (B) 32 Mbps (C) 32 Kbps (D) 64 Mbps

Last Answer : (C) 32 Kbps

Suppose that the one-way propagation delay for a 100 Mbps Ethernet having 48-bit jamming signal is 1.04 micro-seconds. The minimum frame size in bits is: a. 112 b. 160 c. 208 d. 256

Description : Suppose that the one-way propagation delay for a 100 Mbps Ethernet having 48-bit jamming signal is 1.04 micro-seconds. The minimum frame size in bits is: a. 112 b. 160 c. 208 d. 256

Last Answer : d. 256

How many bytes of data can be sent in 15 seconds over a serial link with baud rate of 9600 in asynchronous mode with odd parity and two stop bits in the frame? a. 10,000 bytes b. 12,000 bytes c. 15,000 bytes d. 27,000 bytes

Description : How many bytes of data can be sent in 15 seconds over a serial link with baud rate of 9600 in asynchronous mode with odd parity and two stop bits in the frame? a. 10,000 bytes b. 12,000 bytes c. 15,000 bytes d. 27,000 bytes

Last Answer : b. 12,000 bytes

There are 10 users plugged into a hub running 10Mbps half-duplex.and a serverconnected to the switch running 10Mbps half- duplex as well. Find the bandwidth does each host have to the server? a. 100 kbps b. 1 Mbps c. 2 Mbps d. 10 Mbps

Description : There are 10 users plugged into a hub running 10Mbps half-duplex.and a server connected to the switch running 10Mbps half- duplex as well. Find the bandwidth does each host have to the server? a. 100 kbps b. 1 Mbps c. 2 Mbps d. 10 Mbps

Last Answer : d. 10 Mbps

What is the bit rate for transmitting uncompressed 800x600 pixel colour frames with 8 bits/pixel at 40 frames/second ? (A) 2.4 Mbps (B) 15.36 Mbps (C) 153.6 Mbps (D) 1536 Mbps

Description : What is the bit rate for transmitting uncompressed 800x600 pixel colour frames with 8 bits/pixel at 40 frames/second ? (A) 2.4 Mbps (B) 15.36 Mbps (C) 153.6 Mbps (D) 1536 Mbps 

Last Answer : (C) 153.6 Mbps Explanation: The number of bits/sec is just 800x600x40x8 or 153.6 Mbps.

The network layer is concerned with __________ of data. a. bits b. frames c. packets d. bytes

Description : The network layer is concerned with __________ of data. a. bits b. frames c. packets d. bytes

Last Answer : c. packets

The _______ layer provides a well defined service interface to the network layer, determining how the bits of the physical layer are grouped into frames A. Data Link B. Physical C. Network D. Session

Description : The _______ layer provides a well defined service interface to the network layer, determining how the bits of the physical layer are grouped into frames A. Data Link B. Physical C. Network D. Session

Last Answer : A. Data Link

The network layer encapsulates the data into _______of data. A. bits B. frames C. packets D. bytes

Description : The network layer encapsulates the data into _______of data. A. bits B. frames C. packets D. bytes

Last Answer : C. packets

The network layer is concerned with __________ of data. a) bits b) frames c) packets d) bytes

Description : The network layer is concerned with __________ of data. a) bits b) frames c) packets d) bytes

Last Answer : c) packets

In an Ethernet local area network, which one of the following statements is TRUE ? a. A station stops to sense the channel once it starts transmitting a frame. b. The purpose of the jamming signal is to pad the frames that are smaller than the minimum frame size. c. A station continues to transmit the packet even after the collision is detected. d. The exponential backoff mechanism reduces the probability of collision on retransmissions

Description : In an Ethernet local area network, which one of the following statements is TRUE ? a. A station stops to sense the channel once it starts transmitting a frame. b. The purpose ... collision is detected. d. The exponential backoff mechanism reduces the probability of collision on retransmissions

Last Answer : The exponential backoff mechanism reduces the probability of collision on retransmissions

The maximum frame length for 10-Mbps Ethernet is ________ bytes. A) 1518 B) 1500 C) 1200 D) none of the abov

Description : The maximum frame length for 10-Mbps Ethernet is ________ bytes. A) 1518 B) 1500 C) 1200 D) none of the abov

Last Answer : 1518

The minimum frame length for 10-Mbps Ethernet is _______bytes. A) 32 B) 80 C) 128 D) none of the above

Description : The minimum frame length for 10-Mbps Ethernet is _______bytes. A) 32 B) 80 C) 128 D) none of the above

Last Answer : none of the above

Suppose the round trip propagation delay for a 10 Mbps Ethernet having 48-bit jamming signal is 46.4 ms. The minimum frame size is a. 94 b. 416 c. 464

Description : Suppose the round trip propagation delay for a 10 Mbps Ethernet having 48-bit jamming signal is 46.4 ms. The minimum frame size is a. 94 b. 416 c. 464

Last Answer : c. 464

In a network, when the load is below the capacity of the network, the throughput ______________ A. increases sharply B. increases proportionally with the load C. declines sharply D. declines proportionally with the load

Description : In a network, when the load is below the capacity of the network, the throughput ______________ A. increases sharply B. increases proportionally with the load C. declines sharply D. declines proportionally with the load

Last Answer : B. increases proportionally with the load

In a network, after the load reaches the capacity,throughput _______. A. increases sharply B. increases proportionally with the load C. declines sharply D. declines proportionally with the load

Description : In a network, after the load reaches the capacity,throughput _______. A. increases sharply B. increases proportionally with the load C. declines sharply D. declines proportionally with the load

Last Answer : C. declines sharply

In a digital transmission, the receiver clock is 0.1 percent faster than the sender clock. How many extra bits per second does the receiver receive if the data rate is 1 Mbps ? (A) 10 bps (B) 100 bps (C) 1000 bps (D) 10000 bps

Description : In a digital transmission, the receiver clock is 0.1 percent faster than the sender clock. How many extra bits per second does the receiver receive if the data rate is 1 Mbps ? (A) 10 bps (B) 100 bps (C) 1000 bps (D) 10000 bps

Last Answer : (C) 1000 bps 

The maximum throughput for pure ALOHA is________per cent. A) 12.2 B) 18.4 C) 36.8 D) none of the above

Description : The maximum throughput for pure ALOHA is________per cent. A) 12.2 B) 18.4 C) 36.8 D) none of the above

Last Answer : 18.4

The synchronous modems are more costly than the asynchronous modems because a. they produce large volume of data b. they contain clock recovery circuits c. they transmit the data with stop and start bits d. they operate with a larger bandwidth e. none of above

Description : The synchronous modems are more costly than the asynchronous modems because a. they produce large volume of data b. they contain clock recovery circuits c. they transmit the data with stop and start bits d. they operate with a larger bandwidth e. none of above

Last Answer : they contain clock recovery circuits

Let G(x) be the generator polynomial used for CRC checking. What is the condition that should be satisfied by G(x) to detect odd number of bits in error? a. G(x) contains more than two terms b. G(x) does not divide 1+x^k, for any k not exceeding the frame length c. 1+x is a factor of G(x) d. G(x) has an odd number of terms

Description : Let G(x) be the generator polynomial used for CRC checking. What is the condition that should be satisfied by G(x) to detect odd number of bits in error? a. G(x) contains more than two terms b. G(x) does ... exceeding the frame length c. 1+x is a factor of G(x) d. G(x) has an odd number of terms

Last Answer : c. 1+x is a factor of G(x)

Suppose a digitized voice channel is made by digitizing 8 kHz bandwidth analog voice signal. It is required to sample the signal at twice the highest frequency (two samples per hertz). What is the bit rate required, if it is assumed that each sample requires 8 bits? (A) 32 kbps (B) 64 kbps (C) 128 kbps (D) 256 kbps

Description : Suppose a digitized voice channel is made by digitizing 8 kHz bandwidth analog voice signal. It is required to sample the signal at twice the highest frequency (two samples per hertz). What is the bit rate required, if it ... sample requires 8 bits? (A) 32 kbps (B) 64 kbps (C) 128 kbps (D) 256 kbps

Last Answer : (C) 128 kbps

The data link layer takes the packets from _________ and encapsulates them into frames for transmission. a) network layer b) physical layer c) transport layer d) application layer

Description : The data link layer takes the packets from _________ and encapsulates them into frames for transmission. a) network layer b) physical layer c) transport layer d) application layer

Last Answer : a) network layer

When propagationspeed is multiplied by propagation time, we get the ________. A) throughput B) wavelength of thesignal C) distortionfactor D) distancea signal or bit has traveled

Description : When propagationspeed is multiplied by propagation time, we get the ________. A) throughput B) wavelength of thesignal C) distortionfactor D) distancea signal or bit has traveled

Last Answer : distancea signal or bit has traveled

While transferring files between server and client, if the transmission rates along the path is 10Mbps, 20Mbps, 30Mbps, 40Mbps. The throughput is usually a. 20Mbps b. 10Mbps c. 40Mbps d. 50Mbps

Description : While transferring files between server and client, if the transmission rates along the path is 10Mbps, 20Mbps, 30Mbps, 40Mbps. The throughput is usually a. 20Mbps b. 10Mbps c. 40Mbps d. 50Mbps

Last Answer : b. 10Mbps

Which of the following statement is true? I. An address with all bits 1 is interpreted as all networks or all hosts. II. The class A network 128.0.0.0 is defined as the loopback network. a. i only b. ii onlyc. Both A and B d. None of the above

Description : Which of the following statement is true? I. An address with all bits 1 is interpreted as all networks or all hosts. II. The class A network 128.0.0.0 is defined as the loopback network. a. i only b. ii only c. Both A and B d. None of the above

Last Answer : a. i only

Standard Ethernet (10-Mbps) uses_______ encoding A) NRZ B) AMI C) Manchester D) differential Manchester

Description : Standard Ethernet (10-Mbps) uses_______ encoding A) NRZ B) AMI C) Manchester D) differential Manchester

Last Answer : Manchester

The IEEE 802.3 Standard defines _________ CSMA/CD as the access method for first-generation 10-Mbps Ethernet. A) 1-persistent B) p-persistent C) non-persistent D) none of the above

Description : The IEEE 802.3 Standard defines _________ CSMA/CD as the access method for first-generation 10-Mbps Ethernet. A) 1-persistent B) p-persistent C) non-persistent D) none of the above

Last Answer : 1-persistent

SONET sends ________ frames per second A) 1000 B) 2000 C) 4000 D) 8000

Description : SONET sends ________ frames per second A) 1000 B) 2000 C) 4000 D) 8000

Last Answer : 2000

A Huffman code: A = 1, B = 000, C = 001, D = 01 ,P(A) = 0.4, P(B) = 0.1, P(C) = 0.2, P(D) = 0.3 The average number of bits per letter is A. 8.0 bit B. 2.0 bit C. 1.9 bit D. 2.1 bit

Description : A Huffman code: A = 1, B = 000, C = 001, D = 01 ,P(A) = 0.4, P(B) = 0.1, P(C) = 0.2, P(D) = 0.3 The average number of bits per letter is A. 8.0 bit B. 2.0 bit C. 1.9 bit D. 2.1 bit

Last Answer : C. 1.9 bit

A Huffman code: A = 1, B = 000, C = 001, D = 01 ,P(A) = 0.4, P(B) = 0.1, P(C) = 0.2, P(D) = 0.3 The average number of bits per letter is a. 8.0 bit b. 2.0 bit c. 1.9 bit d. 2.1 bit

Description : A Huffman code: A = 1, B = 000, C = 001, D = 01 ,P(A) = 0.4, P(B) = 0.1, P(C) = 0.2, P(D) = 0.3 The average number of bits per letter is a. 8.0 bit b. 2.0 bit c. 1.9 bit d. 2.1 bit

Last Answer : c. 1.9 bit

What is the term used todescribethe amount of space you have to transmit to and from the Internet? A) Internet speed B) Network speed C) Router D) Bandwidth

Description : What is the term used todescribethe amount of space you have to transmit to and from the Internet? A) Internet speed B) Network speed C) Router D) Bandwidth

Last Answer : Bandwidth

Usually, it takes10-bits to represent one character. How many characters can betransmittedat a speed of 1200 BPS? A. 10 B. 12 C. 120 D. 1200 E. None of the above

Description : Usually, it takes10-bits to represent one character. How many characters can betransmittedat a speed of 1200 BPS? A. 10 B. 12 C. 120 D. 1200 E. None of the above

Last Answer : 120

Speed of processor chip is measured in (1) Mbps (2) MHz (2) Bits/second (4) Bytes/second

Description : Speed of processor chip is measured in (1) Mbps (2) MHz (2) Bits/second (4) Bytes/second

Last Answer : MHz

What is the average uploading speed of 4G LTE network? a) 1-3 Gbps b) 2-5 Gbps c) 1-3 Mbps d) 2-5 Mbps

Description : What is the average uploading speed of 4G LTE network? a) 1-3 Gbps b) 2-5 Gbps c) 1-3 Mbps d) 2-5 Mbps

Last Answer : d) 2-5 Mbps

address use 7 bits for the <network> and 24 bits for the <host> portion of the IP a. address. b. Class A c. Class B d. Class C e. Class D

Description : address use 7 bits for the and 24 bits for the portion of the IP a. address. b. Class A c. Class B d. Class C e. Class D

Last Answer : a. address.

The _____ layer uses data compression to reduce the number of bits to be transmitted. a. presentation b. network c. data link d. application

Description : The _____ layer uses data compression to reduce the number of bits to be transmitted. a. presentation b. network c. data link d. application

Last Answer : a. presentation

. In addresses for _______ networks, the first 16 bits specify a particular network, and the last 16 bits specify a particular host. A. class A B. class C C. class B D. class D

Description : . In addresses for _______ networks, the first 16 bits specify a particular network, and the last 16 bits specify a particular host. A. class A B. class C C. class B D. class D

Last Answer : C. class B