5xl016 electrons pass across the section of a conductor in 1 minute 20 sec. The current flowing is

5xl016 electrons pass across the section of a conductor in 1 minute 20 sec. The current flowing is 

by

1 Answer

Answer :

5xl016 electrons pass across the section of a conductor in 1 minute 20 sec. The current flowing is  0.1 mA.

by

Related questions

A potential difference of 10 V is applied across a conductor of resistance `1 k Omega`. Find the number of electrons flowing through the conductor in

Description : A potential difference of 10 V is applied across a conductor of resistance `1 k Omega`. Find the number of electrons flowing through the conductor in

Last Answer : A potential difference of 10 V is applied across a conductor of resistance `1 k Omega`. ... of electrons flowing through the conductor in 5 minutes.

A stready current i is flowing through a conductor of uniform cross-section. Any segment of the conductor has

Description : A stready current i is flowing through a conductor of uniform cross-section. Any segment of the conductor has

Last Answer : A stready current i is flowing through a conductor of uniform cross-section. Any segment of the ... charge D. charge proportional to current `i`

When current of one ampere is flowing across any cross-section of wire in one second, then the quantity of charge is said to be: (a) One coulomb (b) Three coulomb (c) One micro-coulomb (d) None of above

Description : When current of one ampere is flowing across any cross-section of wire in one second, then the quantity of charge is said to be: (a) One coulomb (b) Three coulomb (c) One micro-coulomb (d) None of above

Last Answer : (a) One coulomb

Find the force on a conductor of length 12m and magnetic flux density 20 units when a current of 0.5A is flowing through it. a) 60 b) 120 c) 180 d) 200

Description : Find the force on a conductor of length 12m and magnetic flux density 20 units when a current of 0.5A is flowing through it. a) 60 b) 120 c) 180 d) 200

Last Answer : b) 120

A pipe of I.D. 4 m is bifurcated into two pipes of I.D. 2 m each. If the average velocity of water flowing through the main pipe is 5 m/sec, the average velocity through the bifurcated pipes is (A) 20 m/sec (B) 10 m/sec (C) 5 √2 m/sec (D) 5 m/sec

Description : A pipe of I.D. 4 m is bifurcated into two pipes of I.D. 2 m each. If the average velocity of water flowing through the main pipe is 5 m/sec, the average velocity through the bifurcated pipes is (A) 20 m/sec (B) 10 m/sec (C) 5 √2 m/sec (D) 5 m/sec

Last Answer : (B) 10 m/sec

Shear stress in a fluid flowing in a round pipe (A) Varies parabolically across the cross-section(B) Remains constant over the cross-section(C) Is zero at the centre and varies linearly with the radius(D) Is zero at the wall and increases linearly to the centre

Description : Shear stress in a fluid flowing in a round pipe (A) Varies parabolically across the cross-section (B) Remains constant over the cross-section (C) Is zero at the centre and varies linearly with the radius (D) Is zero at the wall and increases linearly to the centre

Last Answer : (C) Is zero at the centre and varies linearly with the radius

The Bernoulli's equation is based on the assumption that (A) There is no loss of energy of the liquid flowing (B) The velocity of flow is uniform across any cross-section of the pipe (C) No force except gravity acts on the fluid (D) All of the above

Description : The Bernoulli's equation is based on the assumption that (A) There is no loss of energy of the liquid flowing (B) The velocity of flow is uniform across any cross-section of the pipe (C) No force except gravity acts on the fluid (D) All of the above

Last Answer : Answer: Option D

If 120 Coulomb of charge passes through a conductor in 60 sec, the current in the conductor is

Description : If 120 Coulomb of charge passes through a conductor in 60 sec, the current in the conductor is

Last Answer : If 120 Coulomb of charge passes through a conductor in 60 sec, the current in the conductor is 2 A

A rocket is fired vertically from the ground with a resultant vertical acceleration of 10 m/sec the fuel is finished in one minute and it continues to move up. The maximum height reached will be a.2 km b.20 km c.36 km d.10 km e.80 km

Description : A rocket is fired vertically from the ground with a resultant vertical acceleration of 10 m/sec the fuel is finished in one minute and it continues to move up. The maximum height reached will be a.2 km b.20 km c.36 km d.10 km e.80 km

Last Answer : a. 2 km

In a grit chamber of a sewage treatment plant, A. Flow velocity 0.15 m to 0.3 m/sec is kept B. Depth of 0.9 m to 1.20 m is kept C. One minute of detention period is kept D. All the above

Description : In a grit chamber of a sewage treatment plant, A. Flow velocity 0.15 m to 0.3 m/sec is kept B. Depth of 0.9 m to 1.20 m is kept C. One minute of detention period is kept D. All the above

Last Answer : ANS: D

Assertion : Inside a conductor, electrons have no motion in the absence of some potential difference across it. Reason : In the absence of potential d

Description : Assertion : Inside a conductor, electrons have no motion in the absence of some potential difference across it. Reason : In the absence of potential d

Last Answer : Assertion : Inside a conductor, electrons have no motion in the absence of some potential difference ... D. If both Assertion and Reason are false.

When the current i is flowing through a conductor, the drift velocity is v . If 2i current is flowed through the same metal but having double the area

Description : When the current i is flowing through a conductor, the drift velocity is v . If 2i current is flowed through the same metal but having double the area

Last Answer : When the current i is flowing through a conductor, the drift velocity is v . If 2i current is flowed through the same ... (2)` C. `(v)/(4)` D. `v`

The charge flowing in a conductor varies with times as `Q = at - bt^2.` Then, the current

Description : The charge flowing in a conductor varies with times as `Q = at - bt^2.` Then, the current

Last Answer : The charge flowing in a conductor varies with times as `Q = at - bt^2.` Then, the current A. reaches a maximum ... rate of `(-2b)` D. Both (b) and (c)

The magnitude of current flowing between two end points of a conductor is proportional to the potential difference between them and is called as: (1) Avogadro's law (2) Rault's law (3) Ohms law (4) Faraday's law

Description : The magnitude of current flowing between two end points of a conductor is proportional to the potential difference between them and is called as: (1) Avogadro's law (2) Rault's law (3) Ohms law (4) Faraday's law

Last Answer : (3) Ohms law Explanation: According to Ohm's Law, the potential difference (V) between two terminals of a current-carrying conductor is directly proportional to the current (I), flowing through it. -For any Study materialContact WhatsApp: 8337932441 Join Telegram- Click here

___________ is not affected by a magnetic field a) Change in magnetic flux b) a moving electron c) a stationary proton d) current flowing in a conductor

Description : ___________ is not affected by a magnetic field a) Change in magnetic flux b) a moving electron c) a stationary proton d) current flowing in a conductor

Last Answer : c) a stationary proton

The magnitude of current flowing between two end points of a conductor is proportional to the potential difference between them and is called as: (1) Avogadro’s law (2) Rault’s law (3) Ohms law (4) Faraday’s law

Description : The magnitude of current flowing between two end points of a conductor is proportional to the potential difference between them and is called as: (1) Avogadro’s law (2) Rault’s law (3) Ohms law (4) Faraday’s law

Last Answer : Ohms law

A battery of emf 2 V and internal resistance `0.5 Omega` is connected across a resistance of `9.5 Omega`. How many electrons pass through a cross-sect

Description : A battery of emf 2 V and internal resistance `0.5 Omega` is connected across a resistance of `9.5 Omega`. How many electrons pass through a cross-sect

Last Answer : A battery of emf 2 V and internal resistance `0.5 Omega` is connected across a resistance of `9. ... a cross-section of the resistance in 1 second ?

In an experiment on studying the dependence of current flowing through a given resistor on the potential difference applied across it, list two ways how a student would change the values of current in the circuit?

Description : In an experiment on studying the dependence of current flowing through a given resistor on the potential difference applied across it, list two ways how a student would change the values of current in the circuit?

Last Answer : Answer. There are two ways in which a student can change the values of current in the circuit: By increasing or decreasing the number of cells. By changing the value of resistance.

The self-cleansing velocity of water flowing through pipe lines, is A. 2 metres/sec B. 1 metre/sec C. 0.5 metre/sec D. 0.25 metre/sec

Description : The self-cleansing velocity of water flowing through pipe lines, is A. 2 metres/sec B. 1 metre/sec C. 0.5 metre/sec D. 0.25 metre/sec

Last Answer : ANS: A

Water is flowing at 1 m/sec through a pipe (of 10 cm I.D) with a right angle bend. The force in Newtons exerted on the bend by water is (A) 10 √2π (B) 5π/2 (C) 5 √2π (D) 5π/√2

Description : Water is flowing at 1 m/sec through a pipe (of 10 cm I.D) with a right angle bend. The force in Newtons exerted on the bend by water is (A) 10 √2π (B) 5π/2 (C) 5 √2π (D) 5π/√2

Last Answer : (B) 5π/2

A Rotameter through which air at room temperature and atmospheric pressure is flowing gives a certain reading for a flow rate of 100 cc/sec. If helium (molecular weight 4) is used and Rotameter shows the same reading, the flow rate (cc/sec) is(A) 26(B) 42(C) 269(D) 325

Description : A Rotameter through which air at room temperature and atmospheric pressure is flowing gives a certain reading for a flow rate of 100 cc/sec. If helium (molecular weight 4) is used and Rotameter shows the same reading, the flow rate (cc/sec) is (A) 26 (B) 42 (C) 269 (D) 325

Last Answer : (C) 269

Water is flowing through a 1 foot diameter pipe at the rate of 10ft/sec. What is the volume flow rate of water in ft³/sec?  a. 7.85  b. 6.85  c. 8.85  d. 5.85 V = Aν

Description : Water is flowing through a 1 foot diameter pipe at the rate of 10ft/sec. What is the volume flow rate of water in ft³/sec?  a. 7.85  b. 6.85  c. 8.85  d. 5.85 V = Aν

Last Answer : 7.85

Assertion : If a current is flowing through a conducting wire of non-uniform cross-section, drift speed and resistance both will increase at a section

Description : Assertion : If a current is flowing through a conducting wire of non-uniform cross-section, drift speed and resistance both will increase at a section

Last Answer : Assertion : If a current is flowing through a conducting wire of non-uniform cross-section, drift ... . If Assertion is false but Reason is true.

The resistivity of a potentiometer wire is `40xx10^(-8)Omega-m` and its area of cross section is `8xx10^(-6)m^(2)`. If 0.2 A current is flowing throug

Description : The resistivity of a potentiometer wire is `40xx10^(-8)Omega-m` and its area of cross section is `8xx10^(-6)m^(2)`. If 0.2 A current is flowing throug

Last Answer : The resistivity of a potentiometer wire is `40xx10^(-8)Omega-m` and its area of cross section is `8xx10^(-6)m^(2)` ... . `3.2xx10^(-2)V//m` D. `1V//m`

Which of the following situations can be approximated to a steady state heat transfer system? (A) A red hot steel slab (having outside surface temperature as 1300°C) exposed to the atmospheric air at 35°C (B) 10 kg of dry saturated steam at 8 kgf/cm2 flowing through a short length of stainless steel pipe exposed to atmospheric air at 35°C (C) Boiling brine kept in open vessel when the bottom surface temperature of the vessel is maintained constant at 180°C (D) A sub-cooled refrigerant liquid at 8°C flowing at the rate of 6 Kg/minute through a copper pipe exposed to atmospheric air at 35°C

Description : Which of the following situations can be approximated to a steady state heat transfer system? (A) A red hot steel slab (having outside surface temperature as 1300°C) exposed to the atmospheric air at ... flowing at the rate of 6 Kg/minute through a copper pipe exposed to atmospheric air at 35°C

Last Answer : (B) 10 kg of dry saturated steam at 8 kgf/cm2 flowing through a short length of stainless steel pipe exposed to atmospheric air at 35°C

How much work is done in 1 minute by a machine operating at 300 ft. lb-sec?

Description : How much work is done in 1 minute by a machine operating at 300 ft. lb-sec?

Last Answer : Feel Free to Answer

Which of the following statements about septic shock are true? A. A circulating myocardial depressant factor may account for the cardiac dysfunction sometimes seen with shock due to sepsis or SIRS. B. A cardiac index (CI) of 6 liters per minute per square meter of body surface, a pulmonary capillary wedge pressure of 15 mm. Hg, and a systemic vascular resistance index (SVRI) of 800 dynes-sec/(cm 5-m 2) is a hemodynamic profile consistent with septic shock. C. An increase in SvO 2 in septic patients may be explained by the finding of anatomic arteriovenous shunts. D. Results of human trials employing antimediator therapy, such as antiendotoxin antibodies, IL-1 receptor antagonist, and tumor necrosis factor (TNF) antibodies, have confirmed animal studies that demonstrate a significant im

Description : Which of the following statements about septic shock are true? A. A circulating myocardial depressant factor may account for the cardiac dysfunction sometimes seen with shock due to sepsis or ... animal studies that demonstrate a significant improvement in survival with the use of such agents.

Last Answer : Answer: AB DISCUSSION: Shock due to sepsis or SIRS frequently manifests as a hyperdynamic cardiovascular response, consisting of an elevated CI and a decreased SVR or SVRI. Occasionally, ... been encouraging thus far in human clinical trials, despite the promising results from many animal studies

The coefficient of permeability of soils, is generally expressed in (A) cm/sec (B) cm/minute (C) cm2 /sec (D) cm2 /minute

Description : The coefficient of permeability of soils, is generally expressed in (A) cm/sec (B) cm/minute (C) cm2 /sec (D) cm2 /minute

Last Answer : (A) cm/sec

One ton of refrigeration is not equivalent to the heat removal rate of (A) 200 BTU/minute (B) 50 kcal/minute (C) 50 kJ/sec (D) 3.5 KW

Description : One ton of refrigeration is not equivalent to the heat removal rate of (A) 200 BTU/minute (B) 50 kcal/minute (C) 50 kJ/sec (D) 3.5 KW

Last Answer : (C) 50 kJ/sec

Runoff is measured in (A) Cubic metres (B) Cubic metres per sec. (C) Cubic metres per minute (D) Cubic metres per hour

Description : Runoff is measured in (A) Cubic metres (B) Cubic metres per sec. (C) Cubic metres per minute (D) Cubic metres per hour

Last Answer : Answer: Option B

What is the drift velocity of electrons in a copper conductor having a cross-sectional area of `5xx10^(-6) m^(2)` if the current is 10 A. Assume there

Description : What is the drift velocity of electrons in a copper conductor having a cross-sectional area of `5xx10^(-6) m^(2)` if the current is 10 A. Assume there

Last Answer : What is the drift velocity of electrons in a copper conductor having a cross-sectional area of `5xx10^(-6) m^( ... `8.0xx10^(28) "electrons"//m^(3)`.

Which of the follwing characteristies of electrons determines the current in a conductor?

Description : Which of the follwing characteristies of electrons determines the current in a conductor?

Last Answer : Which of the follwing characteristies of electrons determines the current in a conductor? A. Drift ... velocity D. Neither drift nor thermal velocity

Electric current is the flow of electrons through a conductor; the rate of this flow is measured in ___________. A. volts B. amperes C. coulombs D. ohms

Description : Electric current is the flow of electrons through a conductor; the rate of this flow is measured in ___________. A. volts B. amperes C. coulombs D. ohms

Last Answer : Answer: B

Electric current is the flow of electrons through a conductor. The rate of this flow is measured as ___________. A. volts/watt B. amperes/centimetre C. coulombs/second D. ohms/volt

Description : Electric current is the flow of electrons through a conductor. The rate of this flow is measured as ___________. A. volts/watt B. amperes/centimetre C. coulombs/second D. ohms/volt

Last Answer : Answer: C

The force that causes free electrons to move in a conductor as electric current flow is called a/an _____________. A. resistant force B. electromotive force C. inductive force D. dielectric force

Description : The force that causes free electrons to move in a conductor as electric current flow is called a/an _____________. A. resistant force B. electromotive force C. inductive force D. dielectric force

Last Answer : Answer: B

A semi-conductor is damaged & behaves like a conductor, on passing a strong electric current through it, because it heats up the crystals & breaks the covalent bonds resulting in __________ electrons. (A) Lack of free (B) Excess of (C) Decrease in (D) None of these

Description : A semi-conductor is damaged & behaves like a conductor, on passing a strong electric current through it, because it heats up the crystals & breaks the covalent bonds resulting in __________ electrons. (A) Lack of free (B) Excess of (C) Decrease in (D) None of these

Last Answer : (B) Excess of

Forward current through a semi-conductor diode circuit is due to ________ (a) Minority carriers (b) majority carriers (c) holes (d) electrons

Description : Forward current through a semi-conductor diode circuit is due to ________ (a) Minority carriers (b) majority carriers (c) holes (d) electrons

Last Answer : (b) majority carriers

The current through a metallic conductor is due to the motion of a. free electrons b. Protons c. Neutrons d. still under controversy

Description : The current through a metallic conductor is due to the motion of a. free electrons b. Protons c. Neutrons d. still under controversy

Last Answer : a. free electrons

Copper is often used as an electrical conductor because it _______________. A. has high resistance at low temperatures B. has a highly polished surface C. is able to pass current with little opposition D. holds insulation together well

Description : Copper is often used as an electrical conductor because it _______________. A. has high resistance at low temperatures B. has a highly polished surface C. is able to pass current with little opposition D. holds insulation together well

Last Answer : Answer: C

What are electrons flowing through a conducting medium is called?

Description : What are electrons flowing through a conducting medium is called?

Last Answer : current

What are electrons flowing through a conducting medium is called?

Description : What are electrons flowing through a conducting medium is called?

Last Answer : current

One billion electrons pass from a point P towards another point Q in `10^(-3)` s. What is the current in ampere ? What is its direction ?

Description : One billion electrons pass from a point P towards another point Q in `10^(-3)` s. What is the current in ampere ? What is its direction ?

Last Answer : One billion electrons pass from a point P towards another point Q in `10^(-3)` s. What is the current in ampere ? What is its direction ?

Owing to skin effect (a) current flows through the half cross-section of the conductor (b) portion of the conductor near the surface carries more current and core of the conductor carries less current (c) portion of the conductor near the surface carries less current and core of the conductor carries more cur¬rent (d) any of the above (e) none of the above

Description : Owing to skin effect (a) current flows through the half cross-section of the conductor (b) portion of the conductor near the surface carries more current and core of the conductor carries less current (c) ... core of the conductor carries more cur¬rent (d) any of the above (e) none of the above

Last Answer : (b) portion of the conductor near the surface carries more current and core of the conductor carries less current

Calculate the power of a material with electric field 100 units at a distance of 10cm with a current of 2A flowing through it. a) 10 b) 20 c) 40 d) 80

Description : Calculate the power of a material with electric field 100 units at a distance of 10cm with a current of 2A flowing through it. a) 10 b) 20 c) 40 d) 80

Last Answer : b) 20

__________ employs a set of screen across a flow channel for the separation of dirt/rust from a flowing liquid stream. (A) Thickener (B) Classifier (C) Strainer (D) Clarifier

Description : __________ employs a set of screen across a flow channel for the separation of dirt/rust from a flowing liquid stream. (A) Thickener (B) Classifier (C) Strainer (D) Clarifier

Last Answer : (C) Strainer

Barrier potential in a P-N junction is caused by (A) Thermally generated electrons and holes. (B) Diffusion of majority carriers across the junction. (C) Migration of minority carriers across the junction. (D) Flow of drift current.

Description : Barrier potential in a P-N junction is caused by (A) Thermally generated electrons and holes. (B) Diffusion of majority carriers across the junction. (C) Migration of minority carriers across the junction. (D) Flow of drift current.

Last Answer : (B) Diffusion of majority carriers across the junction.

A goods train 110m long is running with the speed of 30 km/hr. in what time will it pass a boy who is running at 3.5 km/hr in the direction opposite to that in which the train is going. A) 9 sec B) 10sec C) 12sec D) 13sec

Description : A goods train 110m long is running with the speed of 30 km/hr. in what time will it pass a boy who is running at 3.5 km/hr in the direction opposite to that in which the train is going. A) 9 sec B) 10sec C) 12sec D) 13sec

Last Answer : ANSWER : C Explanation:  Length of the train = 110 m  Speed of the train = 30 km/hr  Speed of the boy = 3.5 km/hr  Speed of the train relative to man = (30 + 3.5) km/hr  = 33.5 km/hr  Convert km/ ... cover 110 m at 9.30 m/s  = 110 / 9.30  = 11.8 seconds  = 12 sec(approx.).

A passenger train 165 m long which is running at a speed of 30km/hr. In what time will it pass a man who is running at a speed of 3 km/hr in the opposite direction. In which the train is moving. A)14 sec B) 17sec C)16sec D)18sec

Description : A passenger train 165 m long which is running at a speed of 30km/hr. In what time will it pass a man who is running at a speed of 3 km/hr in the opposite direction. In which the train is moving. A)14 sec B) 17sec C)16sec D)18sec

Last Answer : ANSWER: D Explanation:  Speed of the train = 30 km/hr  Speed of man = 3 km/hr  Length of the train = 165m If direction is given in opposite direction then we add both speed.  That is (30 + 3 )= 33 km/hr ... can easily get the distance of m/s  So it cover 165 m  i.e., 165 * 6 /55 = 18 sec.

A current of 4 amperes flowing for 45 minutes deposits 1.062 gm of metal at cathode. Calculate the equivalent weight of the metal. (Given 1 Faraday = 96500 C)

Description : A current of 4 amperes flowing for 45 minutes deposits 1.062 gm of metal at cathode. Calculate the equivalent weight of the metal. (Given 1 Faraday = 96500 C)

Last Answer : Given:  c : 4 amperes   t : 45 minutes : 45 x 60 = 2700 seconds   w : 1.062 gm   1 Faraday : 96500 C  To calculate: Eq. Weight (CE)  According to Faraday's first law:   w = z c t Therefore,  z = w / ct  ... g/c   Now, C.E. = 96500 x E.C.E.   C. E. = 96500 x 0.00009833  C.E. = 9.4888 gm