One ton of refrigeration is not equivalent to the heat removal rate of (A) 200 BTU/minute (B) 50 kcal/minute (C) 50 kJ/sec (D) 3.5 KW

One ton of refrigeration is not equivalent to the heat removal rate of (A) 200 BTU/minute
(B) 50 kcal/minute
(C) 50 kJ/sec
(D) 3.5 KW
by

1 Answer

Answer :

(C) 50 kJ/sec
by

Related questions

One ton of refrigeration capacity is equivalent to the heat removal rate of (A) 50 kcal/hr (B) 200 BTU/hr (C) 200 BTU/minute

Description : One ton of refrigeration capacity is equivalent to the heat removal rate of (A) 50 kcal/hr (B) 200 BTU/hr (C) 200 BTU/minute

Last Answer : (C) 200 BTU/minute

The benchmarking parameter for a vapour compression refrigeration system is a) kW / kg of refrigerant used b) kcal / m3 of chilled water c) BTU / Ton of Refrigeration d) kW / Ton of Refrigeration

Description : The benchmarking parameter for a vapour compression refrigeration system is a) kW / kg of refrigerant used b) kcal / m3 of chilled water c) BTU / Ton of Refrigeration d) kW / Ton of Refrigeration

Last Answer : d) kW / Ton of Refrigeration

Pick out the wrong statement. (A) A refrigeration cycle violates the second law of thermodynamics (B) Refrigeration cycle is normally represented by a temperature vs. entropy plot (C) In a refrigerator, work required decreases as the temperature of the refrigerator and the temperature at which heat is rejected increases (D) One ton of refrigeration is equivalent to the rate of heat absorption equal to 3.53 kW

Description : Pick out the wrong statement. (A) A refrigeration cycle violates the second law of thermodynamics (B) Refrigeration cycle is normally represented by a temperature vs. entropy plot (C) In a refrigerator, ... (D) One ton of refrigeration is equivalent to the rate of heat absorption equal to 3.53 kW

Last Answer : (A) A refrigeration cycle violates the second law of thermodynamics

The benchmarking parameter for air conditioning equipment is a) kW/Ton of Refrigeration b) kW/ kg of refrigerant handled c) kcal/m3 of chilled water d) Differential temperature across chiller

Description : The benchmarking parameter for air conditioning equipment is a) kW/Ton of Refrigeration b) kW/ kg of refrigerant handled c) kcal/m3 of chilled water d) Differential temperature across chiller

Last Answer : kW/Ton of Refrigeration

The benchmarking parameter for air conditioning equipment is a) kW/Ton of Refrigeration b) kW/ kg of refrigerant handled c) kcal/m3 of chilled water d) Differential temperature across chiLLER

Description : The benchmarking parameter for air conditioning equipment is a) kW/Ton of Refrigeration b) kW/ kg of refrigerant handled c) kcal/m3 of chilled water d) Differential temperature across chiLLER

Last Answer : kW/Ton of Refrigeration

Which one is not an energy consumption benchmark parameter? a) kcal/kWh of electricity generated b) kg/ oC. c) kW/ton of refrigeration d) kWh/kg of yarn

Description : Which one is not an energy consumption benchmark parameter? a) kcal/kWh of electricity generated b) kg/ oC. c) kW/ton of refrigeration d) kWh/kg of yarn

Last Answer : b) kg/ oC.

COP of a refrigerator drawing 1 kW of power per ton of refrigeration is about (A) 0.5 (B) 3.5 (C) 4.5 (D) 8.5

Description : COP of a refrigerator drawing 1 kW of power per ton of refrigeration is about (A) 0.5 (B) 3.5 (C) 4.5 (D) 8.5

Last Answer : (B) 3.5

In S.J. unit, one ton of refrigeration is equal to (a) 210 kJ/min (b) 21 kJ/min (c) 3.5 kJ/min (d) 2.4 kJ/min

Description : In S.J. unit, one ton of refrigeration is equal to (a) 210 kJ/min (b) 21 kJ/min (c) 3.5 kJ/min (d) 2.4 kJ/min

Last Answer : Ans: a

Overall heat transfer co-efficient for cooling of hydrocarbons by water is about (A) 50 -100 Kcal/hr.m2 .°C (B) 50 -100 W/m2 .°K (C) 50 -100 BTU/hr. ft. 2°F (D) 1000 - 1500 BTU/hr. ft. 2°F

Description : Overall heat transfer co-efficient for cooling of hydrocarbons by water is about (A) 50 -100 Kcal/hr.m2 .°C (B) 50 -100 W/m2 .°K (C) 50 -100 BTU/hr. ft. 2°F (D) 1000 - 1500 BTU/hr. ft. 2°F

Last Answer : (C) 50 -100 BTU/hr. ft. 2°F

One ton of refrigeration is equal to the refrigeration effect corresponding to melting of 1000 kg of ice (a) in 1 hour (b) in 1 minute (c) in 24 hours (d) in 12 hours

Description : One ton of refrigeration is equal to the refrigeration effect corresponding to melting of 1000 kg of ice (a) in 1 hour (b) in 1 minute (c) in 24 hours (d) in 12 hours

Last Answer : Ans: c

Which of the following is not the unit of power? (A) kW (kilowatt) (B) hp (horse power) (C) kcal/sec (D) kcal/kg sec

Description : Which of the following is not the unit of power?  (A) kW (kilowatt)  (B) hp (horse power)  (C) kcal/sec  (D) kcal/kg sec 

Last Answer : (D) kcal/kg sec 

Pick out the correct statement. (A) 1 kcal/hr.m.°C is equal to 1 BTU/hr. ft.°F (B) In steady state heat conduction, the only property of the substance which determines the temperature distribution, is the thermal conductivity (C) In unsteady state heat conduction, heat flows in the direction of temperature rise (D) In heat transfer by forced convection, Grashoff number is very important

Description : Pick out the correct statement. (A) 1 kcal/hr.m.°C is equal to 1 BTU/hr. ft.°F (B) In steady state heat conduction, the only property of the substance which determines the ... in the direction of temperature rise (D) In heat transfer by forced convection, Grashoff number is very important

Last Answer : (B) In steady state heat conduction, the only property of the substance which determines the temperature distribution, is the thermal conductivity

In a 100 TPD Sponge Iron plant, the sponge iron is fed to the Induction melting furnace, producing molten steel at 88% yield. The Energy consumption details are as follows: Coal Consumption : 130 TPD GCV of coal : 4500 kcal/kg Power Purchased from Grid : 82400 kWh / day Specific Energy consumption for Kiln producing Sponge Iron: 120 kWh / ton sponge iron Calculate the following 1. Specific Energy Consumption of Induction melting furnace in terms of kWh/ton of molten steel 2. Specific Energy Consumption of the entire plant, in terms of kcal/kg of molten steel (product). 3. Total Energy Consumption of Plant in Tons of Oil Equivalent (TOE )

Description : In a 100 TPD Sponge Iron plant, the sponge iron is fed to the Induction melting furnace,  producing molten steel at 88% yield. The Energy consumption details are as follows: Coal Consumption : 130 ... molten  steel (product). 3. Total Energy Consumption of Plant in Tons of Oil Equivalent (TOE )

Last Answer :  a) Specific Energy Consumption of Induction Melting Furnace  Molten Steel Production from the Induction melting furnace per day  = 100 x 88/100 = 88 TPD Total Energy Consumption of the Plant = 82400 kWh ... mark c) Total Energy consumption of Plant in ToE  = 655864000/107  = 65.586 ToE

A blender has a power of 0.3 kW. It is used to make a fruit smoothie, which takes 50 seconds. How much energy is used Give your answer in kilojoules.kJ?

Description : A blender has a power of 0.3 kW. It is used to make a fruit smoothie, which takes 50 seconds. How much energy is used Give your answer in kilojoules.kJ?

Last Answer : 15 KJ

1 BTU/hr.ft.°F is equal to __________ kcal/hr. m.°C. (A) 1.49 (B) 1 (C) 4.88 (D) None of these

Description : 1 BTU/hr.ft.°F is equal to __________ kcal/hr. m.°C. (A) 1.49 (B) 1 (C) 4.88 (D) None of these

Last Answer : (A) 1.49

A BTU/hr.ft. 2 °F is equal to (A) 1 kcal/hr. m2°C (B) 4.88 kcal/hr. m. 2°C (C) 1 kcal/hr. m2 .°K (D) None of these

Description : A BTU/hr.ft. 2 °F is equal to (A) 1 kcal/hr. m2°C (B) 4.88 kcal/hr. m. 2°C (C) 1 kcal/hr. m2 .°K (D) None of these

Last Answer : (B) 4.88 kcal/hr. m. 2°C

The following heat engine produces power of 100,000 kW. The heat engine operates between 800 K and 300 K. It has a thermal efficiency equal to 50% of that of the Carnot engine for the same temperature. The rate at which heat is absorbed from the hot reservoir is (A) 100,000 kW (B) 160,000 kW (C) 200,000 kW (D) 320,000 kW

Description : The following heat engine produces power of 100,000 kW. The heat engine operates between 800 K and 300 K. It has a thermal efficiency equal to 50% of that of the Carnot engine for the same temperature. The rate at which heat is ... is (A) 100,000 kW (B) 160,000 kW (C) 200,000 kW (D) 320,000 kW

Last Answer : (D) 320,000 kW

The work index in Bond's law for crushing of solids has the following dimensions (A) No units (dimensionless) (B) kWh/ton (C) kW/ton (D) kWh.m1/2 /ton

Description : The work index in Bond's law for crushing of solids has the following dimensions (A) No units (dimensionless) (B) kWh/ton (C) kW/ton (D) kWh.m1/2 /ton

Last Answer : (B) kWh/ton

64-132) rank coal (ASTM) means a coal with 64% (A) Fixed carbon and having a heat value of 13, 200 BTU/1b (B) Ash and a heating value of 13, 200 BTU/1b (C) Fixed carbon and a heating value of 132 BTU/1b (D) None of these

Description : 64-132) rank coal (ASTM) means a coal with 64% (A) Fixed carbon and having a heat value of 13, 200 BTU/1b (B) Ash and a heating value of 13, 200 BTU/1b (C) Fixed carbon and a heating value of 132 BTU/1b (D) None of these

Last Answer : (A) Fixed carbon and having a heat value of 13, 200 BTU/1b

A 50 Hz, 4 pole turboalternator rated at 20 MVA. 13.2 KV has an inertia constant H = 4 KW sec/KVA.

Description : A 50 Hz, 4 pole turboalternator rated at 20 MVA. 13.2 KV has an inertia constant H = 4 KW sec/KVA. The K.E. stored in the rotor at synchronous speed is

Last Answer : A 50 Hz, 4 pole turboalternator rated at 20 MVA. 13.2 KV has an inertia constant H = 4 KW sec/KVA. The K.E. stored in the rotor at synchronous speed is 80 MJ

An engine produces 10 kW brake power while working with a brake thermal efficiency of 30%. If the calorific value of the fuel used is 40000 kJ/kg, then what is the fuel consumption? (a) 1.5 kg/hour (b) 3 kg/hour (c) 0.3 kg/hour (d) 1 kg/hour

Description : An engine produces 10 kW brake power while working with a brake thermal efficiency of 30%. If the calorific value of the fuel used is 40000 kJ/kg, then what is the fuel consumption? (a) 1.5 kg/hour (b) 3 kg/hour (c) 0.3 kg/hour (d) 1 kg/hour

Last Answer : Ans :b

The general rule for rating refrigeration systems (excepting for CO2 system) is to approximate following h.p. per ton of Refrigeration (a) 0.1 to 0.5 h.p. per ton of refrigeration (b) 0.5 to 0.8 h.p. per ton of refrigeration (c) 1 to 2 h.p. per ton of refrigeration (d) 2 to 5 h.p. per ton of refrigeration

Description : The general rule for rating refrigeration systems (excepting for CO2 system) is to approximate following h.p. per ton of Refrigeration (a) 0.1 to 0.5 h.p. per ton of refrigeration (b) 0.5 to 0.8 h.p. per ... (c) 1 to 2 h.p. per ton of refrigeration (d) 2 to 5 h.p. per ton of refrigeration

Last Answer : Ans: c

1 kcal is roughly equal to (A) 4.2 J (B) 42 J (C) 4.2 KJ (D) 42 KJ

Description : 1 kcal is roughly equal to (A) 4.2 J (B) 42 J (C) 4.2 KJ (D) 42 KJ

Last Answer : Answer : C

Water (specific heat cv= 4.2 kJ/ kg ∙ K ) is being heated by a 1500 W h eater. What is the rate of change in temperature of 1kg of the water?  A. 0.043 K/s  B. 0.179 K/s  C. 0.357 K/s  D. 1.50 K/s Formula: Q = mcv ( T)

Description : Water (specific heat cv= 4.2 kJ/ kg ∙ K ) is being heated by a 1500 W h eater. What is the rate of change in temperature of 1kg of the water?  A. 0.043 K/s  B. 0.179 K/s  C. 0.357 K/s  D. 1.50 K/s Formula: Q = mcv ( T)

Last Answer : 0.179 K/s

Reducing suction pressure in refrigeration cycle (a) lowers evaporation temperature (b) increases power required per ton of refrigeration (c) lowers compressor capacity because vapour is lighter (d) all of the above.

Description : Reducing suction pressure in refrigeration cycle (a) lowers evaporation temperature (b) increases power required per ton of refrigeration (c) lowers compressor capacity because vapour is lighter (d) all of the above.

Last Answer : Ans: d

One ton of the refrigeration is (a) the standard unit used in refrigeration problems (b) the cooling effect produced by melting 1 ton of ice (c) the refrigeration effect to freeze 1 ton of water at 0°C into ice at 0°C in 24 hours (d) the refrigeration effect to produce 1 ton of ice at NTP conditions

Description : One ton of the refrigeration is (a) the standard unit used in refrigeration problems (b) the cooling effect produced by melting 1 ton of ice (c) the refrigeration effect to freeze 1 ton of water at ... ice at 0°C in 24 hours (d) the refrigeration effect to produce 1 ton of ice at NTP conditions

Last Answer : Ans: c

A refrigerator is working on reversed carnot cycle between temperature of 30°C to –10°C with capacity of 10 tonnes. Calculate. (i) The COP (ii) Define ton of refrigeration (iii) Give the industrial application of refrigeration

Description : A refrigerator is working on reversed carnot cycle between temperature of 30°C to –10°C with capacity of 10 tonnes. Calculate. (i) The COP (ii) Define ton of refrigeration (iii) Give the industrial application of refrigeration

Last Answer : (ii) Ton of refrigeration: It is defined as the quantity of heat required to be removed from 1Ton water at 0oC to get ice at 0oC in one day. (iii) Industrial applications of refrigeration ... food stuff such as meat, fruit, fruit juice, vegetables etc. 5. Ice cooling of concrete for dam.

1 ton of refrigeration is

Last Answer : 1 ton of refrigeration is 12000 BTU.

The mechanical equivalent of heat is  a. joule  b. calorie  c. Btu  d. Specific heat

Description : The mechanical equivalent of heat is  a. joule  b. calorie  c. Btu  d. Specific heat

Last Answer : joule

We have defined EER by a) BTU/hr/W c) BTU/min/W b) BTU/sec/W d) BTU/hr/V

Description : We have defined EER by a) BTU/hr/W c) BTU/min/W b) BTU/sec/W d) BTU/hr/V

Last Answer : BTU/hr/W

Hot water (0.01 m3 /min) enters the tube side of a counter current shell and tube heat exchanger at 80°C and leaves at 50°C. Cold oil (0.05 m3 /min) of density 800 kg/m3 and specific heat of 2 kJ/kg.K enters at 20°C. The log mean temperature difference in °C is approximately (A) 32 (B) 37 (C) 45 (D) 50

Description : Hot water (0.01 m3 /min) enters the tube side of a counter current shell and tube heat exchanger at 80°C and leaves at 50°C. Cold oil (0.05 m3 /min) of density 800 kg/m3 and specific heat of ... mean temperature difference in °C is approximately (A) 32 (B) 37 (C) 45 (D) 50

Last Answer : (A) 32

. Kick's law assumes that the energy required for size reduction is proportional to the logarithm of the ratio between the initial and the final diameters. The unit of Kick's constant is (A) kW. sec/kg (B) kWh/kg (C) kWh/sec. kg (D) kg/sec

Description : . Kick's law assumes that the energy required for size reduction is proportional to the logarithm of the ratio between the initial and the final diameters. The unit of Kick's constant is (A) kW. sec/kg (B) kWh/kg (C) kWh/sec. kg (D) kg/sec

Last Answer : (A) kW. sec/kg

If 4 kW in antenna produces 50 μV/m in a receiving antenna, a 15 kW will produce _____. A. 200 μV/m B. 10 μV/m C. 100 μV/m D. 20 μV/m

Description : If 4 kW in antenna produces 50 μV/m in a receiving antenna, a 15 kW will produce _____. A. 200 μV/m B. 10 μV/m C. 100 μV/m D. 20 μV/m

Last Answer : C. 100 μV/m

Two alternators rated are 200 KW at 4% regulation, 400 KW 5% regulation operating in parallel at 50HZ , when supply 600 KW the new frequency is a) 50 b) 49 c) 51.3 d) 47.7

Description : Two alternators rated are 200 KW at 4% regulation, 400 KW 5% regulation operating in parallel at 50HZ , when supply 600 KW the new frequency is a) 50 b) 49 c) 51.3 d) 47.7

Last Answer : Ans: 47.7

A 3-phase, 11 kv, 50 Hz, 200 kW load has a power factor of 0.8 lag. ...

Description : A 3-phase, 11 kv, 50 Hz, 200 kW load has a power factor of 0.8 lag. A delta connected 3-phase capacitor is used to improve the power factor to unity. The capacitance perphase of the capacitor in micro-farads is?

Last Answer : A 3-phase, 11 kv, 50 Hz, 200 kW load has a power factor of 0.8 lag. A delta connected 3-phase capacitor is used to improve the power factor to unity. The capacitance perphase of the capacitor in micro-farads is 1.316.

Energy reserves of an average well-fed adult man are about (A) 50,000 kcal (B) 100,000 kcal (C) 200,000 kcal (D) 300,000 kcal

Description : Energy reserves of an average well-fed adult man are about (A) 50,000 kcal (B) 100,000 kcal (C) 200,000 kcal (D) 300,000 kcal

Last Answer : Answer : B

It is desired to concentrate a 20% salt solution (20 kg of salt in 100 kg of solution) to a 30% salt solution in an evaporator. Consider a feed of 300 kg/min at 30°C. The boiling point of the solution is 110°C, the latent heat of vaporisation is 2100 kJ/kg and the specific heat of the solution is 4 kJ/kg.K. The rate at which the heat has to be supplied in (kJ/min) to the evaporator is (A) 3.06 × 10 5 (B) 6.12 × 10 5 (C) 7.24 × 10 5 (D) 9.08 × 10

Description : It is desired to concentrate a 20% salt solution (20 kg of salt in 100 kg of solution) to a 30% salt solution in an evaporator. Consider a feed of 300 kg/min at 30°C. The boiling point of the solution is 110°C, the latent heat of ... 3.06 10 5 (B) 6.12 10 5 (C) 7.24 10 5 (D) 9.08 10

Last Answer : (A) 3.06 × 10

One unit of electricity is equivalent to kcal heat units. a) 800 b) 860 c) 400 d) 680

Description : One unit of electricity is equivalent to kcal heat units. a) 800 b) 860 c) 400 d) 680

Last Answer : 860

32. One unit of electricity is equivalent to kcal heat units. a) 800 b) 860 c) 400 d) 680

Description : One unit of electricity is equivalent to kcal heat units. a) 800 b) 860 c) 400 d) 680

Last Answer : 860

One unit of electricity is equivalent to kcal heat units. c) 800 c) 400 d)860 d) 680

Description : One unit of electricity is equivalent to kcal heat units. c) 800 c) 400 d)860 d) 680

Last Answer : 860

114. One unit of electricity is equivalent to kcal heat units. a) 800 c) 400 b) 860 d) 680

Description : 114. One unit of electricity is equivalent to kcal heat units. a) 800 c) 400 b) 860 d) 680

Last Answer : 860

64-132) rank coal (ASTM) means a coal with 64% (A) Fixed carbon and having a heating value around 13, 200 BTU/1b (B) Ash and heating value around 13, 200 BTU/1b (C) Fixed carbon and heating value around 132 BTU/1b (D) None of these

Description : 64-132) rank coal (ASTM) means a coal with 64% (A) Fixed carbon and having a heating value around 13, 200 BTU/1b (B) Ash and heating value around 13, 200 BTU/1b (C) Fixed carbon and heating value around 132 BTU/1b (D) None of these

Last Answer : (A) Fixed carbon and having a heating value around 13, 200 BTU/1b

The reaction A → B is conducted in an adiabatic plug flow reactor (PFR). Pure A at a concentration of 2 kmol/m3 is fed to the reactor at the rate of 0.01 m3 /s and at a temperature of 500 K. If the exit conversion is 20%, then the exit temperature (in k) is (Data: Heat of reaction at 298 K = - 50000 kJ/ kmole of A reacted Heat capacities CPA = CPB = 100kJ/kmole. K (may be assumed to be independent of temperature)) (A) 400 (B) 500 (C) 600 (D) 1000

Description : The reaction A → B is conducted in an adiabatic plug flow reactor (PFR). Pure A at a concentration of 2 kmol/m3 is fed to the reactor at the rate of 0.01 m3 /s and at a temperature of 500 K. If the exit ... /kmole. K (may be assumed to be independent of temperature)) (A) 400 (B) 500 (C) 600 (D) 1000

Last Answer : (C) 600

Steam side heat transfer co-efficient in an evaporator is in the range of __________ kcal/hr.m2°C. (A) 10-50 (B) 100-500 (C) 1000-1500 (D) 5000-15000

Description : Steam side heat transfer co-efficient in an evaporator is in the range of __________ kcal/hr.m2°C. (A) 10-50 (B) 100-500 (C) 1000-1500 (D) 5000-15000

Last Answer : (D) 5000-15000

Molar heat capacity of water in equilibrium with ice at constant pressure is __________ Kcal/kg mole. °K (A) 0 (B) ∞ (C) 50 (D) 100

Description : Molar heat capacity of water in equilibrium with ice at constant pressure is __________ Kcal/kg mole. °K (A) 0 (B) ∞ (C) 50 (D) 100

Last Answer : (B) ∞

Pick out the wrong statement. (A) Percentage of ash in coke produced from medium coking coal is more than that in coal (B) The calorific value (kcal/Nm3 ) of coke oven gas reduces on removal of hydrogen from it by cryogenic method (C) Ash is normally removed as 'fly-ash' in Kopper-Totzek process of coal gasification (D) Coal based fertiliser plants in India at Talcher (Orissa) and Ramagundam (A.P) employ Kopper-Totzek process of coal gasification

Description : Pick out the wrong statement. (A) Percentage of ash in coke produced from medium coking coal is more than that in coal (B) The calorific value (kcal/Nm3 ) of coke oven gas reduces on ... plants in India at Talcher (Orissa) and Ramagundam (A.P) employ Kopper-Totzek process of coal gasification

Last Answer : (C) Ash is normally removed as 'fly-ash' in Kopper-Totzek process of coal gasification

The power generation potential in mini hydro power plant for a water flow of 3 m3 /sec with a head of 14 meters and with a system efficiency of 55% is a) 226.6 kW b) 76.4 kW c) 23.1 kW d) none of the above

Description : The power generation potential in mini hydro power plant for a water flow of 3 m3 /sec with a head of 14 meters and with a system efficiency of 55% is a) 226.6 kW b) 76.4 kW c) 23.1 kW d) none of the above

Last Answer : a) 226.6 kW

In power transmission equation, P=2ΠNT/60×1000 a. P is in kw and T is maximum torque b. P is in NM/sec and T is maximum torque c. P is in NM/sec and T is mean torque d. P is in kw and T is mean torque

Description : In power transmission equation, P=2ΠNT/60×1000 a. P is in kw and T is maximum torque b. P is in NM/sec and T is maximum torque c. P is in NM/sec and T is mean torque d. P is in kw and T is mean torque

Last Answer : d. P is in kw and T is mean torque