Water is flowing through a 1 foot diameter pipe at the rate of 10ft/sec. What is the volume flow rate of water in ft³/sec?  a. 7.85  b. 6.85  c. 8.85  d. 5.85 V = Aν

Water is flowing through a 1 foot
diameter pipe at the rate of 10ft/sec.
What is the volume flow rate of water in
ft³/sec?
 a. 7.85
 b. 6.85
 c. 8.85
 d. 5.85
V = Aν
by

1 Answer

Answer :

7.85
by

Related questions

A certain fluid is flowing in a 0.5m x 0.3 channel at the rate of 3 m/s and has a specific volume of 0.012 m³/kg. Determined the mass of water flowing in kg/s.  a. 267 kg/s  b. 378 kg/s  c. 375 kg/s  d. 456.5 kg/s m = Aν/V

Description : A certain fluid is flowing in a 0.5m x 0.3 channel at the rate of 3 m/s and has a specific volume of 0.012 m³/kg. Determined the mass of water flowing in kg/s.  a. 267 kg/s  b. 378 kg/s  c. 375 kg/s  d. 456.5 kg/s m = Aν/V

Last Answer : 375 kg/s

A gas having a volume of100 ft³ at 27ºC is expanded to 120 ft³by heated at constant pressure to what temperature has it been heated to have this new volume?  a. 87°C  b. 85°C  c. 76°C  d. 97°C t2= T2–T1

Description : A gas having a volume of100 ft³ at 27ºC is expanded to 120 ft³by heated at constant pressure to what temperature has it been heated to have this new volume?  a. 87°C  b. 85°C  c. 76°C  d. 97°C t2= T2–T1

Last Answer : 87°C

A fluid flows in a steady manner between two section in a flow line at section 1: A 1 = 1ft², V1 = 100fpm, volume1 of 4ft³/lb. at sec2: A2 = 2 ft², p= 0.20 lb/ft³ calculate the velocity at section 2.  a. 625 fpm  b. 567 fpm  c. 356 fpm  d. None of the above

Description : A fluid flows in a steady manner between two section in a flow line at section 1: A 1 = 1ft², V1 = 100fpm, volume1 of 4ft³/lb. at sec2: A2 = 2 ft², p= 0.20 lb/ft³ calculate the velocity at section 2.  a. 625 fpm  b. 567 fpm  c. 356 fpm  d. None of the above

Last Answer : 625 fpm

Water flowing at a 6m/s through a 60 mm pipe is suddenly channeled into a 30 mm pipe. What is the velocity in the small pipe?  a. 34m/s  b. 24m/s  c. 15m/s  d. 27m/s

Description : Water flowing at a 6m/s through a 60 mm pipe is suddenly channeled into a 30 mm pipe. What is the velocity in the small pipe?  a. 34m/s  b. 24m/s  c. 15m/s  d. 27m/s

Last Answer : 24m/s

Wet steam at 1 MPa flowing through a pipe is throttled to a pressure of 0.1 MPa. If the throttling temperature is110°C, What is the quality of the steam in the pipe?  a) 96%  b) 86%  c) 76%  d) 66%

Description : Wet steam at 1 MPa flowing through a pipe is throttled to a pressure of 0.1 MPa. If the throttling temperature is110°C, What is the quality of the steam in the pipe?  a) 96%  b) 86%  c) 76%  d) 66%

Last Answer : 96%

A steam calorimeter receives steam from a pipe at 0.1 MPa and 20°SH. For a pipe steam pressure of 2 MPa, what is the quality of the steam?  a) 95.56%  b) 70.10%  c) 95.20%  d) 85.10% Formula: h1 = hf1 + x1hfg1

Description : A steam calorimeter receives steam from a pipe at 0.1 MPa and 20°SH. For a pipe steam pressure of 2 MPa, what is the quality of the steam?  a) 95.56%  b) 70.10%  c) 95.20%  d) 85.10% Formula: h1 = hf1 + x1hfg1

Last Answer : 265.4°C, 430.7kJ/kg, 71.4kJ/kg, 1.0327kJ/(kg)(K),502.1 kJ/kg

Water flow to a terminal 3 mm diameter and has an average speed of 2 m/s. What is the rate of flow in cubic meter/mm?  a. 0.0001m³/min  b. 0.076 m³/min  c. 0.085 m³/min  d. 0.097 m³/min

Description : Water flow to a terminal 3 mm diameter and has an average speed of 2 m/s. What is the rate of flow in cubic meter/mm?  a. 0.0001m³/min  b. 0.076 m³/min  c. 0.085 m³/min  d. 0.097 m³/min

Last Answer : 0.085 m³/min

A problem Drum ( 3 ft. diameter ; 6 ft. height ) is field with a fluid whose density is 50 lb/ft^3. Determine the total volume of the fluid.  A. 42.41 ft^3  B.44.35 ft^3  C.45.63 ft^3  D.41.23 ft^3 Formula: Vf = (pi d^2 h) / 4

Description : A problem Drum ( 3 ft. diameter ; 6 ft. height ) is field with a fluid whose density is 50 lb/ft^3. Determine the total volume of the fluid.  A. 42.41 ft^3  B.44.35 ft^3  C.45.63 ft^3  D.41.23 ft^3 Formula: Vf = (pi d^2 h) / 4

Last Answer : 42.41 ft^3

3.0 lbm of air are contained at 25 psia and 100 ˚F. Given that Rair = 53.35 ft-lbf/lbm- ˚F, what is the volume of the container?  A.10.7 ft^3  B.14.7 ft^3  C.15 ft^3  D.24.9 ft^3 Formula: use the ideal gas law pV = mRT T = (100 +460) ˚R V = mRT/p

Description : 3.0 lbm of air are contained at 25 psia and 100 ˚F. Given that Rair = 53.35 ft-lbf/lbm- ˚F, what is the volume of the container?  A.10.7 ft^3  B.14.7 ft^3  C.15 ft^3  D.24.9 ft^3 Formula: use the ideal gas law pV = mRT T = (100 +460) ˚R V = mRT/p

Last Answer : 24.9 ft^3

Amount or volume of liquid that pass in a given limit of time  a. Flow rate  b. Volume  c. Time  d. None of the above

Description : Amount or volume of liquid that pass in a given limit of time  a. Flow rate  b. Volume  c. Time  d. None of the above

Last Answer : Flow rate

If air is at pressure, p, of 3200 lbf/ft2 , and at a temperature, T, of 800 ˚R, what is the specific volume, v? (R=5303 ft-lbf/lbm-˚R, and air can be modeled as an ideal gas.)  A.9.8 ft^3/lbm  B.11.2 ft^3/lbm  C.13.33 ft^3/lbm  D.14.2 ft^3/lbm Formula: pv = RT v = RT / p

Description : If air is at pressure, p, of 3200 lbf/ft2 , and at a temperature, T, of 800 ˚R, what is the specific volume, v? (R=5303 ft-lbf/lbm-˚R, and air can be modeled as an ideal gas.)  A.9.8 ft^3/lbm  B.11.2 ft^3/lbm  C.13.33 ft^3/lbm  D.14.2 ft^3/lbm Formula: pv = RT v = RT / p

Last Answer : 13.33 ft^3/lbm

The loss of head due to viscosity for laminar flow in pipes is (where d = Diameter of pipe, l = Length of pipe, v w = Specific weight of the flowing liquid) (A) 4 (B) 8 (C) 16 (D) 32

Description : The loss of head due to viscosity for laminar flow in pipes is (where d = Diameter of pipe, l = Length of pipe, v w = Specific weight of the flowing liquid) (A) 4 (B) 8 (C) 16 (D) 32

Last Answer : Answer: Option D

Is a steady flow process at total constant pressure through a control volume for which there is no heat?  a. Adiabatic Saturation Process  b. Dew point  c. Adiabatic Ratio  d. None of the above

Description : Is a steady flow process at total constant pressure through a control volume for which there is no heat?  a. Adiabatic Saturation Process  b. Dew point  c. Adiabatic Ratio  d. None of the above

Last Answer : Adiabatic Saturation Process

What is defined as a process during which a fluid flows through a control volume steadily?  A. Transient-flow process  B. Steady and uniform process  C. Uniform-flow process  D. Steady-flow process

Description : What is defined as a process during which a fluid flows through a control volume steadily?  A. Transient-flow process  B. Steady and uniform process  C. Uniform-flow process  D. Steady-flow process

Last Answer : Steady-flow process

essure drop (Δp) for a fluid flowing in turbulent flow through a pipe is a function of velocity (V) as (A) V1.8 (B) V-0.2 (C) V2.7 (D) V

Description : essure drop (Δp) for a fluid flowing in turbulent flow through a pipe is a function of velocity (V) as (A) V1.8 (B) V-0.2 (C) V2.7 (D) V

Last Answer : (D) V

For a perfect gas, according to Boyle’s law (where p = Absolute pressure, v = Volume, and T = Absolute temperature)  A. p v = constant, if T is kept constant  B. v/T = constant, if p is kept constant  C. p/T = constant, if v is kept constant  D. T/p = constant, if v is kept constant

Description : For a perfect gas, according to Boyle’s law (where p = Absolute pressure, v = Volume, and T = Absolute temperature)  A. p v = constant, if T is kept constant  B. v/T = constant, if p is kept constant  C. p/T = constant, if v is kept constant  D. T/p = constant, if v is kept constant

Last Answer : Answer: A

The sum of internal energy (U) and the product of pressure and volume (p.v) is known as  A. workdone  B. entropy  C. enthalpy  D. none of these

Description : The sum of internal energy (U) and the product of pressure and volume (p.v) is known as  A. workdone  B. entropy  C. enthalpy  D. none of these

Last Answer : Answer: C

If a gas is heated against a pressure, keeping the volume constant, then work done will be equal to  (a) + v  (b) – ve  (c) zero  (d) pressure x volume  (e) any where between zero and infinity.

Description : If a gas is heated against a pressure, keeping the volume constant, then work done will be equal to  (a) + v  (b) – ve  (c) zero  (d) pressure x volume  (e) any where between zero and infinity.

Last Answer : Answer : c

A fluid is flowing inside the inner tube of a double pipe heat exchanger with diameter 'd'. For a fixed mass flow rate, the tube side heat transfer co￾efficient for turbulent flow conditions is proportional to (A) d 0.8 (B) d -0.2 (C) d -1 (D) d -1.8

Description : A fluid is flowing inside the inner tube of a double pipe heat exchanger with diameter 'd'. For a fixed mass flow rate, the tube side heat transfer co￾efficient for turbulent flow conditions is proportional to (A) d 0.8 (B) d -0.2 (C) d -1 (D) d -1.8

Last Answer : (B) d -0.2

In a non-flow reversible process for which p = (- 3V+ 15) x 105N/m2,V changes from 1 m to 2 m3. The work done will be about  (a) 100 xlOO5 joules  (b) lxlO5 joules  (c) 10 xlO5 joules  (d) 10 xlO5 kilo joules  (e) 10xl04ki\ojoules.

Description : In a non-flow reversible process for which p = (- 3V+ 15) x 105N/m2,V changes from 1 m to 2 m3. The work done will be about  (a) 100 xlOO5 joules  (b) lxlO5 joules  (c) 10 xlO5 joules  (d) 10 xlO5 kilo joules  (e) 10xl04ki\ojoules.

Last Answer : Answer : c

What remains constant during a steady-flow process?  A. Mass  B. Energy content of the control volume  C. Temperature  D. Mass and energy content of the control volume

Description : What remains constant during a steady-flow process?  A. Mass  B. Energy content of the control volume  C. Temperature  D. Mass and energy content of the control volume

Last Answer : Mass and energy content of the control volume

A car whose mass is 2 metric tons is accelerated uniformly from stand hill to 100 kmph in 5 sec. Find the driving force in Newton’s.  a. 11,120 N  b. 11,320 N  c. 11,420 N  d. 11520 N formula: F= ma / k

Description : A car whose mass is 2 metric tons is accelerated uniformly from stand hill to 100 kmph in 5 sec. Find the driving force in Newton’s.  a. 11,120 N  b. 11,320 N  c. 11,420 N  d. 11520 N formula: F= ma / k

Last Answer : 11,120N

To displace a cubic foot of fresh water, you need _________ force.  a. 62.4 lb  b. 9.81 lb  c. 76 lb  d. 760 lb

Description : To displace a cubic foot of fresh water, you need _________ force.  a. 62.4 lb  b. 9.81 lb  c. 76 lb  d. 760 lb

Last Answer : 62.4 lb

A 10m^3 vessel initially contains 5 m^3 of liquid water and 5 m^3 of saturated water vapor at 100 kPa. Calculate the internal energy of the system using the steam table.  A. 5 x10^5 kJ  B. 8x10^5 kJ  C. 1 x10^6 kJ  D. 2 x10^6 kJ Formula: fromthe steamtable vƒ = 0.001043 m^3 / kg vg = 1.6940 m^3 / kg u ƒ= 417.3 kJ/kg ug= 2506kJ/kg formula: Mvap = V vap/vg M liq = Vliq/ vƒ u =uƒM liq + ug M vap

Description : A 10m^3 vessel initially contains 5 m^3 of liquid water and 5 m^3 of saturated water vapor at 100 kPa. Calculate the internal energy of the system using the steam table.  A. 5 x10^5 kJ  B. 8x10^5 kJ  C. 1 ... 3 kJ/kg ug= 2506kJ/kg formula: Mvap = V vap/vg M liq = Vliq/ vƒ u =uƒM liq + ug M vap

Last Answer : 2 x10^6 kJ

While swimming at depth of120m in a fresh water lake, A fish emits an air bubbles of volume 2.0mm³ atmospheric pressure is 100kPa. What is the pressure of the bubble?  a) 217.7 kPa  b) 317.7 kPa  c) 417.7 kPa  d) 517.7 kPa Formula: P= δh

Description : While swimming at depth of120m in a fresh water lake, A fish emits an air bubbles of volume 2.0mm³ atmospheric pressure is 100kPa. What is the pressure of the bubble?  a) 217.7 kPa  b) 317.7 kPa  c) 417.7 kPa  d) 517.7 kPa Formula: P= δh

Last Answer : 217.7 kPa

The specific heat at constant volume is  A. the amount of heat required to raise the temperature of unit mass of gas through one degree, at constant pressure  B. the amount of heat required to raise the temperature of unit mass of gas through one degree, at constant volume  C. the amount of heat required to raise the temperature of 1 kg of water through one degree  D. any one of the above

Description : The specific heat at constant volume is  A. the amount of heat required to raise the temperature of unit mass of gas through one degree, at constant pressure  B. the amount of heat required to raise ... to raise the temperature of 1 kg of water through one degree  D. any one of the above

Last Answer : Answer: B

It is an energy flux, equal to the rate of energy flow per unit area per unit time across some surface.  a. Irradiance  b. Radiant Intensity  c. Luminosity  d. Brightness

Description : It is an energy flux, equal to the rate of energy flow per unit area per unit time across some surface.  a. Irradiance  b. Radiant Intensity  c. Luminosity  d. Brightness

Last Answer : Luminosity

Calculate: a. Mass flow rate in lb/hr. b. The velocity at section 2 in fps  a. 800,000lb/hr;625ft/s  b. 900,000lb/hr;625 ft/s  c. 888,000lb/hr;269 ft/s  d. 700,000lb/hr;269 ft/s m = A1V!/V1

Description : Calculate: a. Mass flow rate in lb/hr. b. The velocity at section 2 in fps  a. 800,000lb/hr;625ft/s  b. 900,000lb/hr;625 ft/s  c. 888,000lb/hr;269 ft/s  d. 700,000lb/hr;269 ft/s m = A1V!/V1

Last Answer : 900,000 lb/hr;625 ft/s

Molecular volume of any perfect gas at 600 x 103 N/m2 and 27°C will be  (a) 4.17m3/kgmol  (b) 400 m3/kg mol  (c) 0.15 m3/kg mol  (d) 41.7 m3/kg mol  (e) 417m3/kgmol.

Description : Molecular volume of any perfect gas at 600 x 103 N/m2 and 27°C will be  (a) 4.17m3/kgmol  (b) 400 m3/kg mol  (c) 0.15 m3/kg mol  (d) 41.7 m3/kg mol  (e) 417m3/kgmol.

Last Answer : Answer : a

One erg is equivalent to how many joules?  A. 10^-8  B. 10^-7  C. 10^-6  D. 10^-5

Description : One erg is equivalent to how many joules?  A. 10^-8  B. 10^-7  C. 10^-6  D. 10^-5

Last Answer : 10^-7

Hydraulic mean depth (Dm) for a circular pipe of diameter 'D' flowing full is 0.25 D. For a circular channel, at Dm = 0.3 D, gives the condition for the maximum (A) Flow rate (B) Mean velocity (C) Both 'a' & 'b' (D) Neither 'a' nor 'b

Description : Hydraulic mean depth (Dm) for a circular pipe of diameter 'D' flowing full is 0.25 D. For a circular channel, at Dm = 0.3 D, gives the condition for the maximum (A) Flow rate (B) Mean velocity (C) Both 'a' & 'b' (D) Neither 'a' nor 'b

Last Answer : (B) Mean velocity

An ideal gas of volume 1liter and pressure 10 bar undergoes a quasistatic adiabatic expansion until the pressure drops to 1 bar. Assume γ to be 1.4 what is the final volume?  a. 3.18 l  b. 4.18 l  c. 5.18 l  d. 6.18 l

Description : An ideal gas of volume 1liter and pressure 10 bar undergoes a quasistatic adiabatic expansion until the pressure drops to 1 bar. Assume γ to be 1.4 what is the final volume?  a. 3.18 l  b. 4.18 l  c. 5.18 l  d. 6.18 l

Last Answer : 5.18 l

There are 1.36 kg of gas, for which R = 377 J/kg.k and k = 1.25, that undergo a nonflow constant volume process from p1 = 551.6 kPa and t1 = 60°C to p2 = 1655 kPa. During the process the gas is internally stirred and there are also added 105.5 kJ of heat. Determine t2. (Formula: T2= T1p2/ p1)  a. 999 K  b. 888 K  c. 456 K  d. One of the above

Description : There are 1.36 kg of gas, for which R = 377 J/kg.k and k = 1.25, that undergo a nonflow constant volume process from p1 = 551.6 kPa and t1 = 60°C to p2 = 1655 kPa. During the process the gas is internally stirred and ... (Formula: T2= T1p2/ p1)  a. 999 K  b. 888 K  c. 456 K  d. One of the above

Last Answer : 999 K

Steam at 1000 lbf/ft^2 pressure and 300˚R has specific volume of 6.5 ft^3/lbm and a specific enthalpy of 9800 lbf-ft/lbm. Find the internal energy per pound mass of steam.  A.2500 lbf-ft/lbm  B.3300 lbf-ft/lbm  C.5400 lbf-ft/lbm  D.6900 lbf-ft/lbm Formula: h= u+ pV u= h– pV

Description : Steam at 1000 lbf/ft^2 pressure and 300˚R has specific volume of 6.5 ft^3/lbm and a specific enthalpy of 9800 lbf-ft/lbm. Find the internal energy per pound mass of steam.  A.2500 lbf-ft/lbm  B.3300 lbf-ft/lbm  C.5400 lbf-ft/lbm  D.6900 lbf-ft/lbm Formula: h= u+ pV u= h– pV

Last Answer : 3300 lbf-ft/lbm

Gas is enclosed in a cylinder with a weighted piston as the stop boundary. The gas is heated and expands from a volume of 0.04 m^3 to 0.10 m^3 at a constant pressure of 200kPa.Calculate the work done by the system.  A. 8 kJ  B. 10 kJ  C.12 kJ  D.14 kJ Formula: W = p(V2-V1)

Description : Gas is enclosed in a cylinder with a weighted piston as the stop boundary. The gas is heated and expands from a volume of 0.04 m^3 to 0.10 m^3 at a constant pressure of 200kPa.Calculate the work done by the system.  A. 8 kJ  B. 10 kJ  C.12 kJ  D.14 kJ Formula: W = p(V2-V1)

Last Answer : 12 kJ

Find ∫ for steam at 100 psia and 600°F.If h = 1329.6 and v = 6.216  a. 1214 Btu / lb  b. 1234 Btu /lb  c. 1342 Btu / lb  d. 1324 Btu /lb formula: ∫ = h– pv/ J

Description : Find ∫ for steam at 100 psia and 600°F.If h = 1329.6 and v = 6.216  a. 1214 Btu / lb  b. 1234 Btu /lb  c. 1342 Btu / lb  d. 1324 Btu /lb formula: ∫ = h– pv/ J

Last Answer : 1214Btu / lb

The amount of heat required to raise the temperature of the unit mass of gas through one degree at constant volume, is called  A.specific heat at constant volume  B.specific heat at constant pressure  C.kilo Joule  D.none of these

Description : The amount of heat required to raise the temperature of the unit mass of gas through one degree at constant volume, is called  A.specific heat at constant volume  B.specific heat at constant pressure  C.kilo Joule  D.none of these

Last Answer : Answer: A

How many Newton’s (N) in 900,000 dynes?  a) 8 Newton’s  b) 9 Newton’s  c) 7 Newton’s  d) 6 Newton’s Formula: 1Newton (N)=100,000dynes

Description : How many Newton’s (N) in 900,000 dynes?  a) 8 Newton’s  b) 9 Newton’s  c) 7 Newton’s  d) 6 Newton’s Formula: 1Newton (N)=100,000dynes

Last Answer : 9 Newton’s

What is the resulting pressure when one pound of air at 15 psia and 200 ˚F is heated at constant volume to 800 ˚F?  A.15 psia  B. 28.6 psia  C. 36.4 psia.  D. 52.1 psia Formula : T1/p1 = T2/p2 p2= p1T2 / T1

Description : What is the resulting pressure when one pound of air at 15 psia and 200 ˚F is heated at constant volume to 800 ˚F?  A.15 psia  B. 28.6 psia  C. 36.4 psia.  D. 52.1 psia Formula : T1/p1 = T2/p2 p2= p1T2 / T1

Last Answer : 28.6 psia

What do you call a system in which there is a flow of matter through the boundary?  a. Closed system  b. Open system  c. Isolated system  d. All of these

Description : What do you call a system in which there is a flow of matter through the boundary?  a. Closed system  b. Open system  c. Isolated system  d. All of these

Last Answer : Open system

The flow through an open system is _________ if all properties at each point within the system remain constant with respect to time.  a. streamline flow  b. steady flow  c. constant flow  d. algebraic flow

Description : The flow through an open system is _________ if all properties at each point within the system remain constant with respect to time.  a. streamline flow  b. steady flow  c. constant flow  d. algebraic flow

Last Answer : steady flow

If the velocity of flow as well as the diameter of the flowing pipe are respectively doubled through a pipe system in use since long, the head loss will thereafter be (a) Halved (b) Doubled (c) Increased 4 times (d) No change

Description : If the velocity of flow as well as the diameter of the flowing pipe are respectively doubled through a pipe system in use since long, the head loss will thereafter be (a) Halved (b) Doubled (c) Increased 4 times (d) No change

Last Answer : (b) Doubled

A cannon of weight 10 tonnes fires a shell of 50 kg with a muzzle velocity of 900 m/sec at an angle of 30?. The time taken for the shell to emerge from the barrel is 0.004 sec. The velocity of the cannon would be a.3.9 m/sec b.7.8 m/sec c.8.95 m/sec d.1.95 m/sec e.5.85 m/sec

Description : A cannon of weight 10 tonnes fires a shell of 50 kg with a muzzle velocity of 900 m/sec at an angle of 30?. The time taken for the shell to emerge from the barrel is 0.004 sec. The velocity of the cannon would be a.3.9 m/sec b.7.8 m/sec c.8.95 m/sec d.1.95 m/sec e.5.85 m/sec

Last Answer : a. 3.9 m/sec

The rate at which this is quantity passes through a fixed boundary per unit time  a. Flux  b. Existence  c. Irradiance  d. All of these

Description : The rate at which this is quantity passes through a fixed boundary per unit time  a. Flux  b. Existence  c. Irradiance  d. All of these

Last Answer : All of these

Twenty grams of ice at 0˚C melts to water at 0˚C. How much does the entropy of the 20g change in this process?  a. 30.5 J/K  b. 24.6 J/K  c. 21.3 J/K  d. 15.7 J/K

Description : Twenty grams of ice at 0˚C melts to water at 0˚C. How much does the entropy of the 20g change in this process?  a. 30.5 J/K  b. 24.6 J/K  c. 21.3 J/K  d. 15.7 J/K

Last Answer : 24.6 J/K

The self-cleansing velocity of water flowing through pipe lines, is A. 2 metres/sec B. 1 metre/sec C. 0.5 metre/sec D. 0.25 metre/sec

Description : The self-cleansing velocity of water flowing through pipe lines, is A. 2 metres/sec B. 1 metre/sec C. 0.5 metre/sec D. 0.25 metre/sec

Last Answer : ANS: A

Water is flowing at 1 m/sec through a pipe (of 10 cm I.D) with a right angle bend. The force in Newtons exerted on the bend by water is (A) 10 √2π (B) 5π/2 (C) 5 √2π (D) 5π/√2

Description : Water is flowing at 1 m/sec through a pipe (of 10 cm I.D) with a right angle bend. The force in Newtons exerted on the bend by water is (A) 10 √2π (B) 5π/2 (C) 5 √2π (D) 5π/√2

Last Answer : (B) 5π/2

A pipe of I.D. 4 m is bifurcated into two pipes of I.D. 2 m each. If the average velocity of water flowing through the main pipe is 5 m/sec, the average velocity through the bifurcated pipes is (A) 20 m/sec (B) 10 m/sec (C) 5 √2 m/sec (D) 5 m/sec

Description : A pipe of I.D. 4 m is bifurcated into two pipes of I.D. 2 m each. If the average velocity of water flowing through the main pipe is 5 m/sec, the average velocity through the bifurcated pipes is (A) 20 m/sec (B) 10 m/sec (C) 5 √2 m/sec (D) 5 m/sec

Last Answer : (B) 10 m/sec

What is the latent heat of vaporization of water at 1 atm?  A. 2314.8 kJ/kg  B. 2257.1 kJ/kg  C. 2511.7 kJ/kg  D. 2429.8 kJ/kg

Description : What is the latent heat of vaporization of water at 1 atm?  A. 2314.8 kJ/kg  B. 2257.1 kJ/kg  C. 2511.7 kJ/kg  D. 2429.8 kJ/kg

Last Answer : 2257.1 kJ/kg

Find the change in internal energy of 5 lb. of oxygen gas when the temperature changes from 100 ˚F to 120 ˚F. CV = 0.157 BTU/lbm-˚R  A.14.7 BTU  B.15.7 BTU  C. 16.8 BTU  D. 15.9 BTU Formula: U= mcv T

Description : Find the change in internal energy of 5 lb. of oxygen gas when the temperature changes from 100 ˚F to 120 ˚F. CV = 0.157 BTU/lbm-˚R  A.14.7 BTU  B.15.7 BTU  C. 16.8 BTU  D. 15.9 BTU Formula: U= mcv T

Last Answer : 15.7 BTU