What are the ways to reduce system loss ?

What are the ways to reduce system loss ?
by

1 Answer

Answer :

( a) Monitor meter readings and coordinate with bills , ( b) Collection of outstanding bills , ( c) Detection of illegal electricity connections , ( d) Improvement of billing system , ( e) Elevation of transmission voltage
by

Related questions

How to reduce eddy current loss ?

Description : How to reduce eddy current loss ?

Last Answer : Answer : If you want to reduce the current loss, you must make the laminations of the core as thin as possible. And if the laminations can be well laminated or insulated then the eddy current loss can be greatly reduced.

What is System Loss ?

Description : What is System Loss ?

Last Answer : Answer : System loss is the loss of power due to transmission of energy from the point of production to the point of use , waste of machinery including the own use of the production center , technical and non-technical losses etc.

What is Unemployment System Loss ?

Description : What is Unemployment System Loss ?

Last Answer : ( a) Consumption loss , ( b) Billing loss , ( c) Collection loss

How many types of system loss in the context of Bangladesh ?

Description : How many types of system loss in the context of Bangladesh ?

Last Answer : There are two types of system loss. Namely- (a) technical loss , ( b) unskilled loss

In what ways can RLC be solved in parallel circuit ?

Description : In what ways can RLC be solved in parallel circuit ?

Last Answer : Answer : vector or phaser method , admixture method , vector algebra method , equivalent impedance method.

What is Hysteresis Loss ?

Description : What is Hysteresis Loss ?

Last Answer : We know that transformers are made of electromagnetic materials like iron , ferrite cores etc. Now when this transformer is repeatedly magnetized and de-magnetized by an alternating current, the ... , generators , fans. However, generators and transformers try to control this hysteresis loss.

What is Eddie Current Loss ?

Description : What is Eddie Current Loss ?

Last Answer : The iron loss of the transformer depends on the maximum flux density and the supply frequency. Since the transformer is always fixed i.e. fixed frequency and supply and fixed then here core and ... here is considered as constant or unchanged loss. And this is basically known as Eddie Current Loss.

What is the reason why wattmeter indicates only copper loss during transformer short circuit test ?

Description : What is the reason why wattmeter indicates only copper loss during transformer short circuit test ?

Last Answer : Answer : The voltage applied in this test is limited to 5% to 10% of the rated voltage . As a result, much less mutual flux ( Φm) is produced in the core than normal mutual flux. Since ... Φm² , the core loss is practically zero. Thus the whole of the wattmeter reading is considered copper loss.

Why is core loss zero during short circuit test ?

Description : Why is core loss zero during short circuit test ?

Last Answer : The voltage applied by the varicus on the high side is very low , so the mutual flux in the core is also very low. So core loss is zero.

What is Copper Loss ?

Description : What is Copper Loss ?

Last Answer : Copper loss is the loss due to the ohmic resistance of the primary and secondary windings of the transformer.

On what does the core loss of a transformer depend ?

Description : On what does the core loss of a transformer depend ?

Last Answer : The core loss of the transformer depends on the voltage applied to the primary.

What is Hysteresis Loss ?

Description : What is Hysteresis Loss ?

Last Answer : Hysteresis Loss Wh = nh / B ^ 1.6 max fv

What is Stress Loss ?

Description : What is Stress Loss ?

Last Answer : Magnetic loss and mechanical loss together are called stress loss.

What effect does increased heat loss have on resistance ?

Description : What effect does increased heat loss have on resistance ?

Last Answer : As the heat decreases, the resistance decreases. Note: In the case of semiconductors, the resistance increases as the heat decreases. As the heat increases, the resistance increases.

What are technical system losses ?

Description : What are technical system losses ?

Last Answer : Waste due to transportation, waste due to equipment, waste due to own use of power plant.

What is base or radix in number system ?

Description : What is base or radix in number system ?

Last Answer : The number of individual digits used in each numbering system is called the base or radix of that numbering system .

What is the conductivity of molar ?

Description : What is the conductivity of molar ?

Last Answer : The density of a solution as cm. When one mole of electrolytic substance is dissolved in it, the conductivity obtained by multiplying it by the relative conductivity of the solution is called molecular conductivity of the solution .

How do I purchase a product ?

Description : How do I purchase a product ?

Last Answer : From Alibaba you can purchase products by paying MASTER CARD or through bank.

What is an analog signal ?

Description : What is an analog signal ?

Last Answer : Signals whose values ​​change continuously are called analog signals. For example- voltage of electricity supplied to the house.

What is Zener Diod ?

Description : What is Zener Diod ?

Last Answer : Zener diode is a special type of diode which, like ordinary diode, not only conducts current in the forward direction , but also in the opposite direction if the voltage exceeds the level of breakdown ... diode is to use the shunt regulator and the voltage reference as the voltage of the circuit.

What is the multiplying factor of shunt ?

Description : What is the multiplying factor of shunt ?

Last Answer : Answer : The ratio of load or matte current to ammeter current is called shunt multiplying power.

What is ammeter shunt ?

Description : What is ammeter shunt ?

Last Answer : A small amount of radial coupling in parallel with the coil to increase the range of ammeter is called ammeter shunt.

What is short circuit current ?

Description : What is short circuit current ?

Last Answer : Answer : A fault in an electrical system whose current, before or after the current flows through the load, is combined with one or more phases of neutral current which causes more current to flow than normal. The current is called short circuit current.

What is a current limiting reactor ? How many types and what are they ?

Description : What is a current limiting reactor ? How many types and what are they ?

Last Answer : Answer : A current limiting reactor is basically an inductive coil which limits the short circuit current by providing inductive reactance when required. Types: 1. Based on the structure- a) Dry type ... reactor. Basbar reactors are again of 2 types- a) Ring system reactor b) Tiber system reactor

What is the method of diagnosing short circuit current ?

Description : What is the method of diagnosing short circuit current ?

Last Answer : There are three methods for determining short circuit current , namely- 1) Ohmic method 2) Per unit method 3.) Percentage reactance method.

What are symmetrical and asymmetrical faults ?

Description : What are symmetrical and asymmetrical faults ?

Last Answer : Symmetrical Fault: The same amount in each phase due to the float in the electrical system. The fault that causes hot current to flow is called semantic fault. Circuit breaker ratings are determined by ... through each fan is called an asymmetrical fault. The relay is set via asymmetrical font.

What is Basbar and Bas Kaplar ?

Description : What is Basbar and Bas Kaplar ?

Last Answer : Basbar : Basbar is basically a sheet or color of copper or aluminum. It is the job of the bus driver to deliver power to one or more lads with power from one or more cables. Bus ... is basically a combination of circuit breaker and isolator. There are fire proof walls around the bus coupler.

Why is the busbar sectionalized ?

Description : Why is the busbar sectionalized ?

Last Answer : Answer : If an error occurs in any part of the busbar, the operation of the entire busbar system will not stop. The maximum success of this system is due to the interconnection of different sections of the circuit and the smooth distribution in the outgoing circuit.

title : _

Description : title : _

Last Answer : Basbar is a type of copper and aluminum conductive sheet or mata rod , which collects electrical energy from one or more circuits and distributes that energy through one or more circuits.

Write different font names or different short circuit font names ?

Description : Write different font names or different short circuit font names ?

Last Answer : There are two main types of short circuit faults. Namely- 1. Semantic faults and 2. Asymmetrical font Symmetrical fault - a) Short circuit three phases together b) Short circuit asymmetrical fault with three ... result c) Double line to ground font d) Two phase one Circuit and third phase earth.

What is Electrical Fault ? What is the cause of the fault ?

Description : What is Electrical Fault ? What is the cause of the fault ?

Last Answer : Answer : Fault: When two or more conductors come in contact with each other while operating at normal voltage difference, the result is said to be organized. Causes of Fault: Faults are organized due to ... loss of line c) Lightning charge d) Voltage drop e) Loss of unbalance and stability etc.

What features should a switchgear have ?

Description : What features should a switchgear have ?

Last Answer : Switchgear should have the following characteristics- a) Sensitivity b) Detection ability c) Reliability d) High speed e) Durability. F) Expansion advantage g) Simplicity.

What are the components of switch gear ?

Description : What are the components of switch gear ?

Last Answer : The components of switch gear are: circuit breaker , relay , instrument transformer , housing , conductor etc.

What do you mean by switchgear ?

Description : What do you mean by switchgear ?

Last Answer : Answer : Switch gear does not mean a single corner object. It refers to the position of the electromagnetic system, including the connective , isolating , and maintenance equipment of normal activity .

What is an Earth Electrode ?

Description : What is an Earth Electrode ?

Last Answer : Puta metal part in the soil which connects to the soil is called earth electrode. Thank you all for today's electrical questions and answers.

What is Earthing Lead ?

Description : What is Earthing Lead ?

Last Answer : The wire that connects the earth continuity wire and the earth electrode is called the earthing lead.

What earthing is done in hilly areas ?

Description : What earthing is done in hilly areas ?

Last Answer : Sheet earthing is done in hilly areas. Shit electrodes are placed by digging trenches on the slopes of the hill.

What should be the size of rod earthing ?

Description : What should be the size of rod earthing ?

Last Answer : In case of iron or steel rod the diameter is 16 mm but in case of copper rod it is 12.5 mm. In both cases the length is at least 2.5 m. Is to be.

What does earth continuity mean ?

Description : What does earth continuity mean ?

Last Answer : The conduction wire that connects the earthing lead to the metal cover of electrical furniture, appliances, or wiring is called the earth continuity wire.

Which earthing is less expensive ?

Description : Which earthing is less expensive ?

Last Answer : Rod earthing is the least expensive. Because the soil does not have to be eroded, the cost is less than other earthing.

What should be the size of the pipe electrode ?

Description : What should be the size of the pipe electrode ?

Last Answer : The size of the pipe electrode should be 36 mm diameter 2 to 2.75 m long galvanized iron or steel pipe.

How many types of earthing and what are they ?

Description : How many types of earthing and what are they ?

Last Answer : There are two types of earthing , namely _ a) system earthing b) equipment earthing.

What are the essential elements for earthing ?

Description : What are the essential elements for earthing ?

Last Answer : They are _ a) earthen continuity b) earthing lead c) earthy electrode

What is the best earthing method ?

Description : What is the best earthing method ?

Last Answer : Pipe earthing method is best. This is because it is less expensive and when the soil dries out in the dry season , regular earthing can be done by pouring water through the pipes.

What is Neutral Plan ?

Description : What is Neutral Plan ?

Last Answer : A plane at infinite distance , where the value of electric field intensity and potential V is zero , is called Neautral Plan .

On what subject does inductance in transmission line depend ?

Description : On what subject does inductance in transmission line depend ?

Last Answer : a) On the line b) Conductor spacing c) Conductor radius

What does GMD & GMR mean ?

Description : What does GMD & GMR mean ?

Last Answer : GMD = Geometrical Mean Distance GMR = Geometrical Mean Radiue.

What is the best economic pf ?

Description : What is the best economic pf ?

Last Answer : Improving the power factor means maximum annual savings , which is called the best economic power factor.

What is Tariff ?

Description : What is Tariff ?

Last Answer : Answer : The amount that the power company charges per unit ( kWH) of electricity is called electricity tariff or tax.

What is Diversity Factor ?

Description : What is Diversity Factor ?

Last Answer : Diversity factor is the sum of the individual maximum demand and the ratio of the maximum demand of the plant.