What is base or radix in number system ?

What is base or radix in number system ?
by

1 Answer

Answer :

The number of individual digits used in each numbering system is called the base or radix of that numbering system .
by

Related questions

What does the base, or radix, of a number system tell you about the system?

Description : What does the base, or radix, of a number system tell you about the system?

Last Answer : The number of symbols used in the system

Another name for base is __________ a) root b) radix c) entity d) median

Description : Another name for base is __________ a) root b) radix c) entity d) median

Last Answer : Answer: b Explanation: Another name for base is radix. Base refers to the number of digits that a particular number system consists of. The base of decimal number system is 10 , binary is 2 and so on

Why is the base part of the transistor thin ?

Description : Why is the base part of the transistor thin ?

Last Answer : Transistors are made to amplify electrical signals. The active region of the transistor is the ground / back. The thinner the back , the stronger the discharging collector's electric field. As a result, if a ... gain ( B) will be excessive. This is why the base part of the transistor is thinned.

What is back or base ? What is the back or base ?

Description : What is back or base ? What is the back or base ?

Last Answer : The middle part of a transistor which forms two pn junctions is called back.

The value of radix in binary number system is _____________ a) 2 b) 8 c) 10 d) 1

Description : The value of radix in binary number system is _____________ a) 2 b) 8 c) 10 d) 1

Last Answer : Answer: a Explanation: In a binary number system, the value of base or radix is 2. The binary system uses only two digits for the representation of numbers, therefore its base id chosen to be 2

Write the radix of binary,octal,decimal and hexadecimal number system.

Description : Write the radix of binary,octal,decimal and hexadecimal number system.

Last Answer : Radix of: Binary – 2 Octal - 8 Decimal - 10 Hexadecimal -16

An I/O device which provides photographic outputs for printing galleys, is the 1) Camera printer 2) Automatic typesetter 3) Radix printer 4) All of these

Description : An I/O device which provides photographic outputs for printing galleys, is the 1) Camera printer 2) Automatic typesetter 3) Radix printer 4) All of these

Last Answer : 4) All of these

What is radix-2FFT?

Description : What is radix-2FFT?

Last Answer : In an N point sequence, N is expressed as m r and the given sequence is decimated into r point sequences. In radix 2 FFT, the N point sequence is decimated into 2 point sequences and then 2 point DFT is computed

Which of the following sorting algorithm is in-place a) Counting sort b) Radix sort c) Bucket sort d) None

Description : Which of the following sorting algorithm is in-place a) Counting sort b) Radix sort c) Bucket sort d) None

Last Answer : b) Radix sort

Which of the following algorithms sort n integers, having the range 0 to (n2 -1), in ascending order in O(n) time ? (A) Selection sort (B) Bubble sort (C) Radix sort (D) Insertion sort

Description : Which of the following algorithms sort n integers, having the range 0 to (n2 -1), in ascending order in O(n) time ? (A) Selection sort (B) Bubble sort (C) Radix sort (D) Insertion sort

Last Answer : (C) Radix sort

If there are n integers to sort, each integer has d digits and each digit is in the set {1,2, ..., k}, radix sort can sort the numbers in: (A) O(d n k) (B) O(d nk) (C) O((d+n)k) (D) O(d(n+k))

Description : If there are n integers to sort, each integer has d digits and each digit is in the set {1,2, ..., k}, radix sort can sort the numbers in: (A) O(d n k) (B) O(d nk) (C) O((d+n)k) (D) O(d(n+k))

Last Answer : (D) O(d(n+k))

Define following : i. Radix ii. Bit iii. Nibble iv. Byte

Description : Define following : i. Radix ii. Bit iii. Nibble iv. Byte

Last Answer : i. Radix- the base to a given number system is called as radix.  ii. Bit- Single ‗1‘ or ‗0‘ is called as a bit.  iii. Nibble- a group of 4 bits is called as nibble  iv. Byte- a group of 8 bits is called as a byte.

What are the ways to reduce system loss ?

Description : What are the ways to reduce system loss ?

Last Answer : ( a) Monitor meter readings and coordinate with bills , ( b) Collection of outstanding bills , ( c) Detection of illegal electricity connections , ( d) Improvement of billing system , ( e) Elevation of transmission voltage

What is System Loss ?

Description : What is System Loss ?

Last Answer : Answer : System loss is the loss of power due to transmission of energy from the point of production to the point of use , waste of machinery including the own use of the production center , technical and non-technical losses etc.

What is Unemployment System Loss ?

Description : What is Unemployment System Loss ?

Last Answer : ( a) Consumption loss , ( b) Billing loss , ( c) Collection loss

What are technical system losses ?

Description : What are technical system losses ?

Last Answer : Waste due to transportation, waste due to equipment, waste due to own use of power plant.

How many types of system loss in the context of Bangladesh ?

Description : How many types of system loss in the context of Bangladesh ?

Last Answer : There are two types of system loss. Namely- (a) technical loss , ( b) unskilled loss

What is the number of rows of a logical gate with three inputs ?

Description : What is the number of rows of a logical gate with three inputs ?

Last Answer : There are 8 rows of logical gates with three inputs .

What is the number of NAND gate IC ?

Description : What is the number of NAND gate IC ?

Last Answer : NAND gate IC number 7400

What is the conductivity of molar ?

Description : What is the conductivity of molar ?

Last Answer : The density of a solution as cm. When one mole of electrolytic substance is dissolved in it, the conductivity obtained by multiplying it by the relative conductivity of the solution is called molecular conductivity of the solution .

How do I purchase a product ?

Description : How do I purchase a product ?

Last Answer : From Alibaba you can purchase products by paying MASTER CARD or through bank.

What is an analog signal ?

Description : What is an analog signal ?

Last Answer : Signals whose values ​​change continuously are called analog signals. For example- voltage of electricity supplied to the house.

What is Zener Diod ?

Description : What is Zener Diod ?

Last Answer : Zener diode is a special type of diode which, like ordinary diode, not only conducts current in the forward direction , but also in the opposite direction if the voltage exceeds the level of breakdown ... diode is to use the shunt regulator and the voltage reference as the voltage of the circuit.

What is the multiplying factor of shunt ?

Description : What is the multiplying factor of shunt ?

Last Answer : Answer : The ratio of load or matte current to ammeter current is called shunt multiplying power.

What is ammeter shunt ?

Description : What is ammeter shunt ?

Last Answer : A small amount of radial coupling in parallel with the coil to increase the range of ammeter is called ammeter shunt.

What is short circuit current ?

Description : What is short circuit current ?

Last Answer : Answer : A fault in an electrical system whose current, before or after the current flows through the load, is combined with one or more phases of neutral current which causes more current to flow than normal. The current is called short circuit current.

What is a current limiting reactor ? How many types and what are they ?

Description : What is a current limiting reactor ? How many types and what are they ?

Last Answer : Answer : A current limiting reactor is basically an inductive coil which limits the short circuit current by providing inductive reactance when required. Types: 1. Based on the structure- a) Dry type ... reactor. Basbar reactors are again of 2 types- a) Ring system reactor b) Tiber system reactor

What is the method of diagnosing short circuit current ?

Description : What is the method of diagnosing short circuit current ?

Last Answer : There are three methods for determining short circuit current , namely- 1) Ohmic method 2) Per unit method 3.) Percentage reactance method.

What are symmetrical and asymmetrical faults ?

Description : What are symmetrical and asymmetrical faults ?

Last Answer : Symmetrical Fault: The same amount in each phase due to the float in the electrical system. The fault that causes hot current to flow is called semantic fault. Circuit breaker ratings are determined by ... through each fan is called an asymmetrical fault. The relay is set via asymmetrical font.

What is Basbar and Bas Kaplar ?

Description : What is Basbar and Bas Kaplar ?

Last Answer : Basbar : Basbar is basically a sheet or color of copper or aluminum. It is the job of the bus driver to deliver power to one or more lads with power from one or more cables. Bus ... is basically a combination of circuit breaker and isolator. There are fire proof walls around the bus coupler.

Why is the busbar sectionalized ?

Description : Why is the busbar sectionalized ?

Last Answer : Answer : If an error occurs in any part of the busbar, the operation of the entire busbar system will not stop. The maximum success of this system is due to the interconnection of different sections of the circuit and the smooth distribution in the outgoing circuit.

title : _

Description : title : _

Last Answer : Basbar is a type of copper and aluminum conductive sheet or mata rod , which collects electrical energy from one or more circuits and distributes that energy through one or more circuits.

Write different font names or different short circuit font names ?

Description : Write different font names or different short circuit font names ?

Last Answer : There are two main types of short circuit faults. Namely- 1. Semantic faults and 2. Asymmetrical font Symmetrical fault - a) Short circuit three phases together b) Short circuit asymmetrical fault with three ... result c) Double line to ground font d) Two phase one Circuit and third phase earth.

What is Electrical Fault ? What is the cause of the fault ?

Description : What is Electrical Fault ? What is the cause of the fault ?

Last Answer : Answer : Fault: When two or more conductors come in contact with each other while operating at normal voltage difference, the result is said to be organized. Causes of Fault: Faults are organized due to ... loss of line c) Lightning charge d) Voltage drop e) Loss of unbalance and stability etc.

What features should a switchgear have ?

Description : What features should a switchgear have ?

Last Answer : Switchgear should have the following characteristics- a) Sensitivity b) Detection ability c) Reliability d) High speed e) Durability. F) Expansion advantage g) Simplicity.

What are the components of switch gear ?

Description : What are the components of switch gear ?

Last Answer : The components of switch gear are: circuit breaker , relay , instrument transformer , housing , conductor etc.

What do you mean by switchgear ?

Description : What do you mean by switchgear ?

Last Answer : Answer : Switch gear does not mean a single corner object. It refers to the position of the electromagnetic system, including the connective , isolating , and maintenance equipment of normal activity .

What is an Earth Electrode ?

Description : What is an Earth Electrode ?

Last Answer : Puta metal part in the soil which connects to the soil is called earth electrode. Thank you all for today's electrical questions and answers.

What is Earthing Lead ?

Description : What is Earthing Lead ?

Last Answer : The wire that connects the earth continuity wire and the earth electrode is called the earthing lead.

What earthing is done in hilly areas ?

Description : What earthing is done in hilly areas ?

Last Answer : Sheet earthing is done in hilly areas. Shit electrodes are placed by digging trenches on the slopes of the hill.

What should be the size of rod earthing ?

Description : What should be the size of rod earthing ?

Last Answer : In case of iron or steel rod the diameter is 16 mm but in case of copper rod it is 12.5 mm. In both cases the length is at least 2.5 m. Is to be.

What does earth continuity mean ?

Description : What does earth continuity mean ?

Last Answer : The conduction wire that connects the earthing lead to the metal cover of electrical furniture, appliances, or wiring is called the earth continuity wire.

Which earthing is less expensive ?

Description : Which earthing is less expensive ?

Last Answer : Rod earthing is the least expensive. Because the soil does not have to be eroded, the cost is less than other earthing.

What should be the size of the pipe electrode ?

Description : What should be the size of the pipe electrode ?

Last Answer : The size of the pipe electrode should be 36 mm diameter 2 to 2.75 m long galvanized iron or steel pipe.

How many types of earthing and what are they ?

Description : How many types of earthing and what are they ?

Last Answer : There are two types of earthing , namely _ a) system earthing b) equipment earthing.

What are the essential elements for earthing ?

Description : What are the essential elements for earthing ?

Last Answer : They are _ a) earthen continuity b) earthing lead c) earthy electrode

What is the best earthing method ?

Description : What is the best earthing method ?

Last Answer : Pipe earthing method is best. This is because it is less expensive and when the soil dries out in the dry season , regular earthing can be done by pouring water through the pipes.

What is Neutral Plan ?

Description : What is Neutral Plan ?

Last Answer : A plane at infinite distance , where the value of electric field intensity and potential V is zero , is called Neautral Plan .

On what subject does inductance in transmission line depend ?

Description : On what subject does inductance in transmission line depend ?

Last Answer : a) On the line b) Conductor spacing c) Conductor radius

What does GMD & GMR mean ?

Description : What does GMD & GMR mean ?

Last Answer : GMD = Geometrical Mean Distance GMR = Geometrical Mean Radiue.