Alignment of highways in hilly regions, is decided on (A) Long stretch of very hard cutting (B) Number of river crossings (C) Natural unstable areas (D) All the above

Alignment of highways in hilly regions, is decided on
(A) Long stretch of very hard cutting
(B) Number of river crossings
(C) Natural unstable areas
(D) All the above
by

1 Answer

Answer :

Answer: Option D
by

Related questions

The usual width of side drains along Highways in hilly region, is (A) 50 cm (B) 60 cm (C) 70 cm (D) 100 cm

Description : The usual width of side drains along Highways in hilly region, is (A) 50 cm (B) 60 cm (C) 70 cm (D) 100 cm

Last Answer : Answer: Option B

The usual width of parapet walls along Highways in hilly region, is (A) 50 cm (B) 60 cm (C) 70 cm (D) 80 cm

Description : The usual width of parapet walls along Highways in hilly region, is (A) 50 cm (B) 60 cm (C) 70 cm (D) 80 cm

Last Answer : Answer: Option B

The width of different roads as recommended in Nagpur plan by the Indian Road Conference for hilly region, is (A) Same for National Highways (B) Different for National Highways (C) Same for State Highways (D) Same for Major District roads

Description : The width of different roads as recommended in Nagpur plan by the Indian Road Conference for hilly region, is (A) Same for National Highways (B) Different for National Highways (C) Same for State Highways (D) Same for Major District roads

Last Answer : Answer: Option B

Selection of the routes, of highways depends upon (A) Feasibility of attaining ruling gradient (B) Avoidance of cutting hard rocks (C) Minimum number of bridges (D) All the above

Description : Selection of the routes, of highways depends upon (A) Feasibility of attaining ruling gradient (B) Avoidance of cutting hard rocks (C) Minimum number of bridges (D) All the above

Last Answer : Answer: Option D

Border Roads Organisation for hilly regions (India), was formed in (A) 1947 (B) 1954 (C) 1958 (D) 1960

Description : Border Roads Organisation for hilly regions (India), was formed in (A) 1947 (B) 1954 (C) 1958 (D) 1960

Last Answer : Answer: Option D

What is the main natural cause of disruption of roads in hilly areas

Description : What is the main natural cause of disruption of roads in hilly areas

Last Answer : landslide

Intersection method of detailed plotting is most suitable for (A) Forests (B) Urban areas (C) Hilly areas (D) Plains

Description : Intersection method of detailed plotting is most suitable for (A) Forests (B) Urban areas (C) Hilly areas (D) Plains

Last Answer : (C) Hilly areas

Deviation of the alignment of a trace cut may be permitted in areas involving (A) Land slides (B) Sand dunes (C) Dens (D) None of these

Description : Deviation of the alignment of a trace cut may be permitted in areas involving (A) Land slides (B) Sand dunes (C) Dens (D) None of these

Last Answer : Answer: Option A

The traffic carrying capacity of a single lane, depends on (A) Type of the vehicles (B) Level crossings (C) Road intersections (D) All the above

Description : The traffic carrying capacity of a single lane, depends on (A) Type of the vehicles (B) Level crossings (C) Road intersections (D) All the above

Last Answer : Answer: Option D

Where are railways developed in hilly areas and why? Trace their history in the colonial period. -Geography

Description : Where are railways developed in hilly areas and why? Trace their history in the colonial period. -Geography

Last Answer : Railway tracts are laid through low hills, gaps or tunnels in the hilly terrains of peninsular region. In the places such as Himalayan regions, it is not favourable to construct railway lines. ... west coast has facilitated the movement of passengers and goods in this most economic region of India.

What steps can be taken to control soil erosion in hilly areas? -Geography

Description : What steps can be taken to control soil erosion in hilly areas? -Geography

Last Answer : The methods of soil conservation in hilly regions are : (i) Plowing along the contour lines decreases the speed of water low down the slopes. (ii) terrace cultivation on slopes decreases ... shelterbelts have led to the stabilization of sand dunes and in stabilizing the desert in western India.

Answer the following questions in about 30 words. What steps can be taken to control soil erosion in the hilly areas ? -SST 10th

Description : Answer the following questions in about 30 words. What steps can be taken to control soil erosion in the hilly areas ? -SST 10th

Last Answer : In the hilly areas soil erosion can be controlled by 1. Ploughing across contour lines can slow down the water flow in the slopes. This is known as Contour ploughing. 2. Making use of terrace ... of grass to check erosion by wind and water. This divides the wind force and causes less damage.

What steps can be taken to control soil erosion in hilly areas? -SST 10th

Description : What steps can be taken to control soil erosion in hilly areas? -SST 10th

Last Answer : (i) Ploughing along the contour lines can decelerate the flow of water down the slopes. This is contour ploughing. (ii) Steps can be cut out on the slopes maping terraces. Terrace cultivation ... erosion. Large fields are divided into strips and strips of grass are left to grow between the crops.

What steps can be taken to control soil erosion in hilly areas? -SST 10th

Description : What steps can be taken to control soil erosion in hilly areas? -SST 10th

Last Answer : Methods of soil conservation: (i) Contour ploughing or ploughing along the contour lines of a highland can decelerate the flow of water down the slopes. (ii) Terrace cultivation or cutting of steps ... . (iv) Afforestation or planting of trees in the hilly regions can help in soil conservation.

What earthing is done in hilly areas ?

Description : What earthing is done in hilly areas ?

Last Answer : Sheet earthing is done in hilly areas. Shit electrodes are placed by digging trenches on the slopes of the hill.

How many hilly areas in Bangladesh ?

Last Answer : 10 percent hilly areas of Bangladesh.

The National Forest Policy of India has recommended ____ percent forest cover for hilly areas.

Description : The National Forest Policy of India has recommended ____ percent forest cover for hilly areas.

Last Answer : The National Forest Policy of India has recommended ____ percent forest cover for hilly areas. A. 67 B. 33 C. 19.4 D. 30

Which of the following are true with respect to Indian Railways? 1. It is the larqest public sector undertaking 2. Indian Railway network is the fourth largest in the world 3. Factories at Kapurthala and Perarnbur manufacture passenger coaches 4. The narrow guage lines are confined to the hilly areas only (a) I, II and III (b) I and II (c) II, III and IV (d) I, II, III and IV

Description : Which of the following are true with respect to Indian Railways? 1. It is the larqest public sector undertaking 2. Indian Railway network is the fourth largest in the world 3. Factories at Kapurthala and Perarnbur manufacture passenger ... III (b) I and II (c) II, III and IV (d) I, II, III and IV

Last Answer : Ans: (d)

Which of the gauges is used in the hilly areas? A. Narrow Gauge B. Meter Gauge C. Broad Gauge D. Special Gauge

Description : Which of the gauges is used in the hilly areas? A. Narrow Gauge B. Meter Gauge C. Broad Gauge D. Special Gauge

Last Answer : A [Narrow Gauge] Explanation: Narrow gauge is used in the hilly areas.

Water pipes in hilly areas often burst on a cold frosty night, because – (1) The material of which pipes are made contracts due to cold and so breaks (2) Water in the pipes freezes and on freezing water expands, so pipes break (3) Frost makes the pipes rusty, so they break (4) None of these

Description : Water pipes in hilly areas often burst on a cold frosty night, because – (1) The material of which pipes are made contracts due to cold and so breaks (2) Water in the pipes freezes and on freezing water expands, so pipes break (3) Frost makes the pipes rusty, so they break (4) None of these

Last Answer : (2) Water in the pipes freezes and on freezing water expands, so pipes break Explanation: The temperature may fall below 0° C during cold frosty nights which converts the water inside the pipes into ice, ... in an increase in volume. This exerts great force on the pipes and as a result, they burst.

The drop man holes are generally provided in sewers for A. Industrial areas B. Large town ships C. Hilly town ships D. Cities in plains

Description : The drop man holes are generally provided in sewers for A. Industrial areas B. Large town ships C. Hilly town ships D. Cities in plains

Last Answer : ANS: C

Goitre is common in hilly areas.

Description : Goitre is common in hilly areas.

Last Answer : Ans: Goitre is common in hilly areas because there is deficiency of Iodine in the water.

Virus free seeds of potato are produced in a. Hilly areas b. Spring crop c. In plains d. Autumn crop

Description : Virus free seeds of potato are produced in a. Hilly areas b. Spring crop c. In plains d. Autumn crop

Last Answer : Hilly areas

Which one is a major environmental and safety hazard for the people in hilly areas in Tripura which can be considered as “cancer of hill slopes” a) Flood (b) Landslide (c) Earthquake (d) Desertification

Description : Which one is a major environmental and safety hazard for the people in hilly areas in Tripura which can be considered as “cancer of hill slopes” a) Flood (b) Landslide (c) Earthquake (d) Desertification

Last Answer : (b) Landslide

Water pipes in hilly areas often burst on a cold frosty night, because (1) the material of which pipes are made contracts due to cold and so breaks (2) water in the pipes freezes and on freezing water expands, so pipes break (3) frost makes the pipes rusty, so they break (4) None of these

Description : Water pipes in hilly areas often burst on a cold frosty night, because (1) the material of which pipes are made contracts due to cold and so breaks (2) water in the pipes freezes and on freezing water expands, so pipes break (3) frost makes the pipes rusty, so they break (4) None of these

Last Answer : water in the pipes freezes and on freezing water expands, so pipes break

(i) Suggest the relevant method of water-proofing used for following construction. 1) Basement of buildings. 2) Swimming pool. 3) Water tank. (ii) Suggest the relevant method of transportation of concrete used for construction in following situation. 1) Concreting in hilly areas. 2) Concreting of high-rise building. 3) Concreting under water.

Description : (i) Suggest the relevant method of water-proofing used for following construction. 1) Basement of buildings. 2) Swimming pool. 3) Water tank. (ii) Suggest the relevant method of transportation of ... 1) Concreting in hilly areas. 2) Concreting of high-rise building. 3) Concreting under water.

Last Answer : Method of water-proofing for: 1) Basement of buildings: Waterproofing by using waterproof sealants. 2) Swimming pool: Waterproofing by spraying or grouting in cracks. 3) Water tank: Waterproofing by ... , concrete pump, slip form technique. 3) Concreting under water: Tremie pipe, grout pipe.

Match the following types of soil and regions where they are found in India: List-I List-II A. Alluvial Soils 1. Highland areas of the Plateau B. Black Soils 2. Periphery of the Plateau C. Red Soils 3. Deccan Lava Tracts D. Laterite Soils 4. River Basins and Coastal Plains Codes: A B C D (a) 4 3 1 2 (b) 4 2 3 1 (c) 1 2 3 4 (d) 4 3 2 1

Description : Match the following types of soil and regions where they are found in India: List-I List-II A. Alluvial Soils 1. Highland areas of the Plateau B. Black Soils 2. Periphery of the Plateau C. Red Soils 3. Deccan Lava Tracts D. Laterite Soils 4. ... C D (a) 4 3 1 2 (b) 4 2 3 1 (c) 1 2 3 4 (d) 4 3 2 1

Last Answer : Ans: (d)

The picture above explains overuse of ground water. In India groundwater is being overused in a. agricultural prosperous regions b. hard rock plateau areas c. south India d. all of the above

Description : The picture above explains overuse of ground water. In India groundwater is being overused in a. agricultural prosperous regions b. hard rock plateau areas c. south India d. all of the above

Last Answer : a. agricultural prosperous regions

Trench method of sugarcane planting is followed in — area a. Coastal area b. plane area c. Hilly area d. River basin

Description : Trench method of sugarcane planting is followed in — area a. Coastal area b. plane area c. Hilly area d. River basin

Last Answer : a. Coastal area

How would you increase the yield of maize crop? (a) Evolve high yielding varieties of seeds to suit different agroclimatic regions (b) Develop high yielding varieties (c) Develop disease-resistant varieties (d) Develop early and very early maturing varieties suitable for rainfall areas

Description : How would you increase the yield of maize crop? (a) Evolve high yielding varieties of seeds to suit different agroclimatic regions (b) Develop high yielding varieties (c) Develop disease-resistant varieties (d) Develop early and very early maturing varieties suitable for rainfall areas

Last Answer : Ans: (a)

The failure of ball bearings used in electric motors can result from _____________. A. failure to clean the bearing before repacking B. failure to maintain proper alignment C. excess lubrication forcing the bearing full of grease and eliminating all areas of expansion D. all of the above

Description : The failure of ball bearings used in electric motors can result from _____________. A. failure to clean the bearing before repacking B. failure to maintain proper alignment C. excess lubrication forcing the bearing full of grease and eliminating all areas of expansion D. all of the above

Last Answer : Answer: D

Variability of rainfall is (i) Largest in regions of high rainfall (ii) Largest in coastal areas (iii) Largest in regions of scanty rainfall The correct answer is (A) Only (i) (B) (i) and (ii) (C) Only (iii) (D) (ii) and (iii)

Description : Variability of rainfall is (i) Largest in regions of high rainfall (ii) Largest in coastal areas (iii) Largest in regions of scanty rainfall The correct answer is (A) Only (i) (B) (i) and (ii) (C) Only (iii) (D) (ii) and (iii)

Last Answer : Answer: Option C

In tropical regions, (A) The surface gets heated more effectively than the arctic areas (B) After heating, the air becomes lighter and is displaced by cool air from the polar regions (C) The rising tropical air flows towards the polar region in the upper strata (D) All of the above

Description : In tropical regions, (A) The surface gets heated more effectively than the arctic areas (B) After heating, the air becomes lighter and is displaced by cool air from the polar regions (C) The rising tropical air flows towards the polar region in the upper strata (D) All of the above

Last Answer : (D) All of the above

Where should I go to find out if trains pass a certain rail road crossings?

Description : Where should I go to find out if trains pass a certain rail road crossings?

Last Answer : Google Earth.

Why do certain vehicles have to stop at train crossings?

Description : Why do certain vehicles have to stop at train crossings?

Last Answer : It’s better to be constantly cautious in those vehicles. Having the rule to stop and ensure that the way is clear reduces the risk of someone not, or forgetting to look both ways and just driving through the crossing as they normally do.

How many types of level crossings or rail crossings and what are they ?

Last Answer : 2 types of level crossing or rail crossing. A. Protected rail crossing or guard controlled rail crossing , b. Unprotected rail crossings or unguarded rail crossings.

How many Animal Crossings are there?

Description : How many Animal Crossings are there?

Last Answer : One for DS : Animal Crossing Wild World One for Wii : Animal Crossing Lets Go To The City One for Gamecube : Animal Crossing Wild World (Same title as Ds) :)

In case of Shot Welded Rails the fish plated joint should be avoided on Level Crossings within a distance of --------- from end of level crossing a) 3 meters b) 4 meters c) 5 meters d) 6 meters*

Description : In case of Shot Welded Rails the fish plated joint should be avoided on Level Crossings within a distance of --------- from end of level crossing a) 3 meters b) 4 meters c) 5 meters d) 6 meters*

Last Answer : d) 6 meters*

The minimum and maximum clearances of check rails at all BG level crossings shall be a) 51 to 57 mm* b) 44 to 48 mm c) 41 to 45 mm d) 55 to 70 mm

Description : The minimum and maximum clearances of check rails at all BG level crossings shall be a) 51 to 57 mm* b) 44 to 48 mm c) 41 to 45 mm d) 55 to 70 mm

Last Answer : a) 51 to 57 mm*

Stop boards on either side of approaches of all unmanned level crossings shall be provided at -------------from the centre line of nearest track. a) 3meters b) 5 meters* c) 6 meters d) 10 meters

Description : Stop boards on either side of approaches of all unmanned level crossings shall be provided at -------------from the centre line of nearest track. a) 3meters b) 5 meters* c) 6 meters d) 10 meters

Last Answer : b) 5 meters*

Periodical Census of traffic at unmanned level Crossings should be done once in a) Once in 6 years b) Every year c) Once in 3 years* d) Once in 5 years

Description : Periodical Census of traffic at unmanned level Crossings should be done once in a) Once in 6 years b) Every year c) Once in 3 years* d) Once in 5 years

Last Answer : c) Once in 3 years*

Pick up the correct statement from the following: (A) Minimum desirable width of medians on rural highways is 5 metres (B) Minimum width of medians should be 3 metres (C) On long bridges and viaducts, the width of medians should be 1.5 m (D) All the above

Description : Pick up the correct statement from the following: (A) Minimum desirable width of medians on rural highways is 5 metres (B) Minimum width of medians should be 3 metres (C) On long bridges and viaducts, the width of medians should be 1.5 m (D) All the above

Last Answer : Answer: Option D

Direct method of contouring is (A) A quick method (B) Adopted for large surveys only(C) Most accurate method (D) Suitable for hilly terrains

Description : Direct method of contouring is (A) A quick method (B) Adopted for large surveys only (C) Most accurate method (D) Suitable for hilly terrains

Last Answer : (C) Most accurate method

Which of the following methods of contouring is most suitable for a hilly terrain? (A) Direct method (B) Square method (C) Cross-sections method (D) Tachometric method

Description : Which of the following methods of contouring is most suitable for a hilly terrain? (A) Direct method (B) Square method (C) Cross-sections method (D) Tachometric method

Last Answer : (D) Tachometric method

Non-recording rain gauges (A) Collect the rain whose volume is measured by means of graduated cylinders (B) Collect the rain which is directly measured by means of graduated cylinders in centimetres of water depth (C) Are generally used in hilly terrain (D) Are cylindrical in shape

Description : Non-recording rain gauges (A) Collect the rain whose volume is measured by means of graduated cylinders (B) Collect the rain which is directly measured by means of graduated cylinders in centimetres of water depth (C) Are generally used in hilly terrain (D) Are cylindrical in shape

Last Answer : Answer: Option B

Widening of the roads on curves in hilly region, is done (A) On the outer side (B) On the inner side (C) On the outer and inner sides equally (D) Less on outer side and more on inner side

Description : Widening of the roads on curves in hilly region, is done (A) On the outer side (B) On the inner side (C) On the outer and inner sides equally (D) Less on outer side and more on inner side

Last Answer : Answer: Option B

According to IRC : 52-1973, for a single lane National Highway in hilly region, (A) Width of the carriageway must be 3.75 m (B) Shoulders on either side must be 1.25 m (C) Total width of the road-way must be 6.25 m (D) Total of the above

Description : According to IRC : 52-1973, for a single lane National Highway in hilly region, (A) Width of the carriageway must be 3.75 m (B) Shoulders on either side must be 1.25 m (C) Total width of the road-way must be 6.25 m (D) Total of the above

Last Answer : Answer: Option D

The gradients of trace cuts for hilly roads, are kept (A) Equal to ruling gradient (B) 10 to 20 per cent easier than ruling gradients (C) 10 to 20 per cent steeper than ruling gradients (D) None of these

Description : The gradients of trace cuts for hilly roads, are kept (A) Equal to ruling gradient (B) 10 to 20 per cent easier than ruling gradients (C) 10 to 20 per cent steeper than ruling gradients (D) None of these

Last Answer : Answer: Option B

A pin-jointed plane frame is unstable if (A) (m + r) < 2j (B) (m + r) = 2j (C) (m + r) > 2j (D) None of the above Where m is number of members, r is reaction components and j is number of joints

Description : A pin-jointed plane frame is unstable if (A) (m + r) < 2j (B) (m + r) = 2j (C) (m + r) > 2j (D) None of the above Where m is number of members, r is reaction components and j is number of joints

Last Answer : (A) (m + r) < 2j

Are there any hard core, old school bike shops in the Napa area that would have a frame alignment jig and a master tech that knows how to use it?

Description : Are there any hard core, old school bike shops in the Napa area that would have a frame alignment jig and a master tech that knows how to use it?

Last Answer : I haven’t a clue where to get your wheels spun but I must thank you for the laugh of the day, priceless and brilliant writing. Reminds me of a friends hoarder husband whose shelves with 10,000 Nat. Geo mags fell over and dented her car in the garage. hahaha