Description : Because of a limit on demand for any brand, the primary way a marketer can increase sales beyond a certain point is to: A)show consumers how the brand is better than other brands. B) ... in which consumers can use the product. C)use pioneer promotion D)use reminder and reinforcement advertising.
Last Answer : B)promote more ways in which consumers can use the product.
Description : On an X ray you find the cement of the previous root canal treatment is extending 1mm beyond the apex without any symptoms; what would you do: A. Remove restoration material and retreat B. Apiectomy C. Leave as is until any complications occur
Last Answer : C. Leave as is until any complications occur
Description : How can I increase the volume on my MacBook Pro beyond the volume controls on the keyboard and status bar?
Last Answer : Is buying external speakers out of the question? Other than that, we're talking about messing with system settings, which will most likely blow a speaker. I messed around with fan speeds & broke a ... speakers & if you want more than stereo, buy a surround sound setup with the Griffin FireWave.
Description : When are employment taxes refunded in the previous year?
Last Answer : At the beginning of May
Description : The compression ratio cannot be increased beyond certain limit as it results in a. auto-ignition of fuel b. detonation c. engine knocking d. all the above
Last Answer : ANSWER d. all the above
Description : A material no longer behaves elastically beyond (A) Plastic limit (B) Limiting load (C) Elastic limit (D) Breaking load
Last Answer : (C) Elastic limit
Description : Hooke's law (A) Applies to elastic deformation (B) Applies beyond limit of proportionality in stress-strain curve (C) States that stress is inversely proportional to strain upto elastic limit (D) None of these
Last Answer : (A) Applies to elastic deformation
Description : Consider the following statements: 1. Failure occurs beyond elastic limit 2. Rupture takes place immediately after elastic limit 3. Permanent set occurs beyond elastic limit Which of these are considered in the theories of failure? (a) 1, 2 and 3 (b) 1 and 3 only (c) 2 and 3 only d) 1 and 2 only
Last Answer : d) 1 and 2 only
Description : When stress is increased beyond elastic limit and material is permanently changed this property is a) Permanent stress b) Elasticity c) Yield strength d) Plasticity
Last Answer : d) Plasticity
Description : The limit beyond which the material does not behave elastically is known as (a) Proportional limit (b) Elastic limit (c) Plastic limit (d) Yield Point
Last Answer : (b) Elastic limit
Description : A cupboard in the shape of a rectangular prism has a length of 5 feet, a width of 3 feet, and a height of 7 feet. What is the volume of the cupboard?
Last Answer : 68
Description : While Young's modulus ‘E’ relates to change in length and bulk modulus ‘K’ relates to change in volume, modulus of rigidity ‘G’ relates to change in: A. weight B. density C. shape D. temperature
Last Answer : . shape
Description : When a company adjusts price levels so that it can increase sales volume to levels that match the organisation's expenses, it is said to employ a ---- pricing objective. A)market share B)cash flow C)return on investment D)survival E)profit
Last Answer : D)survival
Description : A solid ball of metal has a spherical cavity inside it. When the ball is heated the volume of the cavity will - (1) increase (2) decrease (3) remain unaffected (4) have its shape changed
Last Answer : (1) increase Explanation: The metal ball can be considered to be made up of several layers of thinner ones. On heating each of these layers will increase in radius.
Description : A solid ball of metal has a spherical cavity inside it. When the ball is heated the volume of the cavity will - (1) Increase (2) decrease (3) remain unaffected (4) have its shape changed
Last Answer : (1) Increase Explanation: The metal ball can be considered to be made up of several layers of thinner ones. On heating each of these layers will increase in radius. As the inner most layer also increases its radius, the volume inside it i.e, the volume of the hollow portion will also increase.
Description : Beyond what point must an object be squeezed for it to become a black hole?
Last Answer : Sxg
Description : Station located on an object which is beyond and is intended to go beyond the major portion of the earth’s atmosphere. A. Terrestrial station B. Space station C. Satellite station D. Mobile satellite station
Last Answer : B. Space station
Description : An object is placed at focus of a concave mirror, image will be formed at : (a) focus (b) between F and C (c) beyond C (d) at infinity
Last Answer : (d) at infinity
Description : An object is placed beyond 2F, in front of a convex lens, image will be formed : (a) between F and 2F (b) at focus (c) at the centre of curvature (d) between focus and Optical centre
Last Answer : (a) between F and 2F
Description : A concave lens can form a real and inverted image, when : (a) Object is placed at 2f (b) Object is placed beyond 2f (c) Object is placed between f and 2f (d) It can never form a real and
Last Answer : (d) It can never form a real and inverted image.
Description : A concave mirror forms real, inverted and enlarged image at infinity. Where is the object kept a) at F b)at C c)between F and C d)beyond C
Last Answer : a) at F
Description : When object is placed _______ in front of convex lens than image formed is virtual, erect, magnified and on same side beyond F . a) between optical centre and F b)At F c)between F and 2F d)2F
Last Answer : a) between optical centre and F
Description : To create an enlarged real image using a concave mirror, the object must be placed: w) beyond the center of curvature. x) between the center and the focus. y) at the focus. z) closer than the focus.
Last Answer : ANSWER: X -- BETWEEN THE CENTER AND THE FOCUS.
Description : If I shave off my eyebrows, how long will it take for them to regrow to their previous volume?
Last Answer : After chemo, two to three months.
Description : How can you increase the volume of an object?
Last Answer : Need answer
Description : Is it possible to hang a hammock beyond its stated length?
Last Answer : It won’t be too comfortable.but it is possible.
Description : Ability of a body to return to its original shape is called?
Last Answer : Elasticity
Description : The ability of a body to return to its original shape is called: a) Plasticity b) Elasticity c) Strain d) Stress
Last Answer : b) Elasticity
Description : The length of the straight portion of a bar beyond the end of the hook, should be at least (A) Twice the diameter (B) Thrice the diameter (C) Four times the diameter (D) Seven times the diameter
Last Answer : Answer: Option D
Description : Two columns 50 cm 50 cm and 60 cm 60 cm carry 80 tonnes and 120 tonnes of loads respectively. The centre to centre distance between columns is 5.00 metres. The permissible bearing capacity of the soil is 20 t ... the foundation slab = 7.00 m (C) Area of footing slab = 11.00 m2 (D) All the above
Last Answer : Option D
Description : The property of the bearing material to yield and adopt its shape to that of journal is called (A) Embeddability (B) Conformability (C) Viscosity (D) Endurance limit stress
Last Answer : (B) Conformability
Description : Distortion or change in shape of a cast partial denture clasp during its clinical use probably indicates that the: A. Ductility was too low B. Hardness was too great C. Ultimate tensile strength was too low D. Tension temperature was too high E. Elastic limit was exceeded
Last Answer : E. Elastic limit was exceeded
Description : What is the sudden return of elastically deformed rock to an undeformed shape?
Last Answer : Feel Free to Answer
Description : STATEMENT-1 : `H_(2)SO_(4)` can not act as reducing agent. STATEMENT-2 : Sulphur can not increase its oxidation number beyond `+6`.
Last Answer : STATEMENT-1 : `H_(2)SO_(4)` can not act as reducing agent. STATEMENT-2 : Sulphur can not increase ... False. D. If both Assertion & Reason are False.
Description : The purpose of a 'slew rate controller' in a circuit such as shown in the illustration is to ______________. EL-0096 A. limit the rate of change of a signal B. introduce a 'live zero' ... linear input into a non-linear output D. reduce air pressure to a value required by a combination circuit
Last Answer : Answer: A
Description : Which of the following statements are correct about Lok Sabha ? (a) The Constitution puts a limit on the size of the Lok Sabha. (b) The size and shape of the Parliamentary Constituencies is determined by the Election Commission. (c) First - ... (c) (C) (a), (c) and (d) (D) (a), (b), (c) and (d)
Description : If a contractor proposes to increase concrete cover beyond contractual specification (i.e. 40mm to 70mm), shall engineers accept the proposal?
Last Answer : In contractual aspect, based on the requirement of General Specification of Civil Engineering Works (1992 Edition), the tolerance of concrete cover is between + ... larger cover. Therefore, with an increase of concrete cover, the crack width will increase which is undesirable.
Description : Presence of carbon monoxide in atmosphere produced by decomposition of chlorophyll and haemoglobin breakdown of some animals, beyond TLV (>50 ppm) (A) Acts as a green house gas thereby raising earth's ... (B) Causes asphyxia (C) Causes increase in sea level (D) Enhances the green house effect
Last Answer : (B) Causes asphyxia
Description : Upto the critical radius of insulation, added insulation, will (A) Increase the heat loss (B) Decrease heat loss and will have no effect beyond that (C) Decrease heat flux (D) Reduce convection heat loss compared to conduction heat less
Last Answer : Option B
Description : Any point beyond PPF is (a) Attainable ; (b) Unattainable ; (c) Attainable with increase in production facilities ; (d) None
Last Answer : (c) Attainable with increase in production facilities
Description : With absorption and decomposition of CO2 in ocean water beyond desired level, there will be : (A) decrease in temperature (B) increase in salinity (C) growth of phytoplankton (D) rise in sea level
Last Answer : Answer: C Phytoplankton are photosynthesizing microscopic organisms that inhabit the upper sunlit layer of almost all oceans and bodies of fresh water. They are agents for "primary production," ... powerful biotoxins. These toxic blooms can kill marine life and people who eat contaminated seafood.
Description : The population of a city in 2000 is 50,000. The average per decade of the previous records of population is 5000 and average percentage per decade is 20%. The population of the city based on geometrical increase method, in the year 2020 will be (A) 56,000 (B) 60,000 (C) 64,000 (D) 72,000
Last Answer : (D) 72,000
Description : A patient who has had a previous stroke and is taking warfarin tells the nurse that he started taking garlic to help reduce his blood pressure. The nurse knows that garlic when taken ... headaches. Garlic and warfarin taken together can greatly increase the INR, increasing the risk of bleeding.
Last Answer : a) can greatly increase the international normalization ratio (INR) and therefore increase the risk of bleeding. Garlic and warfarin taken together can greatly increase the INR, increasing the risk of bleeding.
Description : Utilizing the answer to the previous problem, estimate the overall or average increase in temperature ( ΔT) of the concrete roof from the energy absorbed from the sun during a12hour day. Assume that all of the radiation absorbed goes into ... °C b. 8.9°C c. 9.9°C d. 10.9°C formula: ΔQ = m c ΔT
Last Answer : 7.9 °C
Description : What is the per cent increase in the number of products manufactured by the company in the year 2006 from the previous year ? (Rounded off to two digits after decimal) (1) 19·25 (2) 33·33 (3) 10·45 (4) 42·66 (5) None of these
Last Answer : (5) None of these
Description : Find the percentage change in profit of company M in 2007 from the previous year. 1) 50% increase 2) 20% increase 3) 10% increase 4) 10% decrease
Last Answer : 1) 50% increase
Description : Volumetric Strain is (a)Increase in length / original length (b)Decrease in length / original length (c)Change in volume / original volume (d)All of the above
Last Answer : C is correct
Description : Compressive Strain is (a)Increase in length / original length (a)Decrease in length / original length (c)Change in volume / original volume (d)All of the above
Last Answer : (a)Decrease in length / original length
Description : Tensile Strain is (a)Increase in length / original length (b)Decrease in length / original length (c)Change in volume / original volume (d)All of the above
Last Answer : (a)Increase in length / original lengt