Upto the critical radius of insulation, added insulation, will (A) Increase the heat loss (B) Decrease heat loss and will have no effect beyond that (C) Decrease heat flux (D) Reduce convection heat loss compared to conduction heat less

Upto the critical radius of insulation, added insulation, will
(A) Increase the heat loss
(B) Decrease heat loss and will have no effect beyond that
(C) Decrease heat flux
(D) Reduce convection heat loss compared to conduction heat less
by

1 Answer

Answer :

Option B
by

Related questions

Heat flux increases with temperature drop beyond the Leiden frost point in the plot of heat flux vs. temperature drop for a boiling liquid, because (A) Convection becomes important (B) Conduction becomes important (C) Radiation becomes important (D) Sub-cooled boiling occurs

Description : Heat flux increases with temperature drop beyond the Leiden frost point in the plot of heat flux vs. temperature drop for a boiling liquid, because (A) Convection becomes important (B) Conduction becomes important (C) Radiation becomes important (D) Sub-cooled boiling occurs

Last Answer : (C) Radiation becomes important

In the stratosphere, why does temperature increase with increasing height? (a) Conduction. (b) Convection. (c) Greater absorption of ultraviolet radiation at the top of the strato- sphere. (d) The pressure and density rapidly decrease as you go up through the strato- sphere, thus the ideal gas law requires temperature to increase too.

Description : In the stratosphere, why does temperature increase with increasing height? (a) Conduction. (b) Convection. (c) Greater absorption of ultraviolet radiation at the top of the strato- sphere. (d ... you go up through the strato- sphere, thus the ideal gas law requires temperature to increase too.

Last Answer : Greater absorption of ultraviolet radiation at the top of the strato- sphere.

Loss of heat from untagged steam pipe to the ambient air is by (A) Conduction (B) Convection (C) Radiation (D) All (A), (B) & (C)

Description : Loss of heat from untagged steam pipe to the ambient air is by (A) Conduction (B) Convection (C) Radiation (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

The atmosphere is heated mainly by – (1) Insulation (2) Conduction (3) Radiation (4) Convection

Description : The atmosphere is heated mainly by – (1) Insulation (2) Conduction (3) Radiation (4) Convection

Last Answer : (3) Radiation Explanation: Changes in weather involve air movements, formation of clouds, and precipitation. Energy is needed to make all these things happen. That energy comes from the sun. Heat energy ... radiation. Hot bodies such as the sun radiate their energy mainly in the form of short waves.

Ocean currents are an example of – (1) convection (2) conduction (3) insulation (4) radiation

Description : Ocean currents are an example of – (1) convection (2) conduction (3) insulation (4) radiation

Last Answer : (1) convection Explanation: Heat is transferred by convection in numerous examples of naturally occurring fluid flow, such as: wind, oceanic currents, and movements within the Earth's atmosphere. ... transfer heat from the surplus to deficit heat zones and set the oceanic circulation in motion.

Insulators perform which of the following functions? a) Conduction b) Convection c) Provide electrical insulation d) Allows current leakage at interfaces

Description : Insulators perform which of the following functions? a) Conduction b) Convection c) Provide electrical insulation d) Allows current leakage at interfaces

Last Answer : c) Provide electrical insulation

An electroscope charged WITHOUT contacting a charged body is charged by: w) induction x) conduction y) convection z) insulation

Description : An electroscope charged WITHOUT contacting a charged body is charged by: w) induction x) conduction y) convection z) insulation

Last Answer : ANSWER: W -- INDUCTION

Ocean currents are an example of (1) convection (2) conduction (3) insulation (4) radiation

Description : Ocean currents are an example of (1) convection (2) conduction (3) insulation (4) radiation

Last Answer : convection

reduction in thermal resistance during heat transfer does not occur in the (A) Convection heat transfer by stirring the fluid and cleaning the heating surface (B) Conduction heat transfer by reduction in the material thickness and increase in the thermal conductivity (C) Radiation heat transfer by increasing the temperature and reducing the emissivity (D) None of these

Description : reduction in thermal resistance during heat transfer does not occur in the (A) Convection heat transfer by stirring the fluid and cleaning the heating surface (B) Conduction heat transfer by ... Radiation heat transfer by increasing the temperature and reducing the emissivity (D) None of these

Last Answer : Option C

The critical radius of insulation for a spherical shell is (where, K = thermal conductivity of insulating material h0 = heat transfer coefficient at the outer surface) (A) K/h0 (B) 2K/h0 (C) h0 /K (D) h0 /2K

Description : The critical radius of insulation for a spherical shell is (where, K = thermal conductivity of insulating material h0 = heat transfer coefficient at the outer surface) (A) K/h0 (B) 2K/h0 (C) h0 /K (D) h0 /2K

Last Answer : (B) 2K/h0

The critical radius of insulation for cylindrical pipe is (where, hi = heat transfer coefficient at inside of the pipe) (A) K/h0 (B) 2K/h0 (C) hi /K (D) 2hi /K

Description : The critical radius of insulation for cylindrical pipe is (where, hi = heat transfer coefficient at inside of the pipe) (A) K/h0 (B) 2K/h0 (C) hi /K (D) 2hi /K

Last Answer : (A) K/h0

What is the critical radius of insulation (cms) for a metallic cylinder, if the convective heat transfer co-efficient with the ambient atmosphere is 5 W/m2. °K? Thermal conductivity of metal and insulation material are 40 and 0.1 W/m.°K respectively. (A) 2 (B) 8 (C) 10 (D) 40

Description : What is the critical radius of insulation (cms) for a metallic cylinder, if the convective heat transfer co-efficient with the ambient atmosphere is 5 W/m2. °K? Thermal conductivity of metal and insulation material are 40 and 0.1 W/m.°K respectively. (A) 2 (B) 8 (C) 10 (D) 40

Last Answer : (A) 2

For a given ambient air temperature with increase in the thickness of insulation of a hot cylindrical pipe, the rate of heat loss from the surface would (A) Decrease(B) Increase(C) First decrease and then increase(D) First increase and then decrease

Description : For a given ambient air temperature with increase in the thickness of insulation of a hot cylindrical pipe, the rate of heat loss from the surface would (A) Decrease (B) Increase (C) First decrease and then increase (D) First increase and then decrease

Last Answer : (D) First increase and then decrease

Which of the following statements regarding evacuated tube collectors (ETC) are true? i) ETC is used for high temperatures upto 150oC ii) because of use of vacuum between two concentric glass tube, higher amount of heat is retained in ETC iii) heat loss due to conduction back to atmosphere from ETC is high iv) performance of evacuated tube is highly dependent upon the ambient temperature i & iii b) ii & iii c) i & iv d) i & ii

Description : Which of the following statements regarding evacuated tube collectors (ETC) are true? i) ETC is used for high temperatures upto 150oC ii) because of use of vacuum between two concentric glass tube, higher amount of heat is ... upon the ambient temperature i & iii b) ii & iii c) i & iv d) i & ii

Last Answer : d) i & ii

The mcrease in heat dissipation by air blasts is due to increase in (a) conduction (b) convection (e) radiation (d) any ofthe above

Description : The mcrease in heat dissipation by air blasts is due to increase in (a) conduction (b) convection (e) radiation (d) any ofthe above

Last Answer : (b) convection

Solid type cables are considered unreliable beyond 66 kV because (a) insulation may melt due to higher temperature (b) skin effect dominates on the conductor (c) of corona loss between conductor and sheath material (d) there is a danger of breakdown of insulation due to the presence of voids

Description : Solid type cables are considered unreliable beyond 66 kV because (a) insulation may melt due to higher temperature (b) skin effect dominates on the conductor (c) of corona loss between conductor and sheath material (d) there is a danger of breakdown of insulation due to the presence of voids

Last Answer : (d) there is a danger of breakdown of insulation due to the presence of voids

Heat transfer in the laminar sub-layer in case of a liquid flowing through a pipe, is mostly by (A) Eddies current (B) Conduction (C) Convection (D) None of these

Description : Heat transfer in the laminar sub-layer in case of a liquid flowing through a pipe, is mostly by (A) Eddies current (B) Conduction (C) Convection (D) None of these

Last Answer : (B) Conduction

The Fourier number (defined as a.t/L 2 ) is used in the analysis of problem involving heat transfer by (A) Forced convection (B) Natural convection(C) Transient conduction(D) Steady state conduction

Description : The Fourier number (defined as a.t/L 2 ) is used in the analysis of problem involving heat transfer by (A) Forced convection (B) Natural convection (C) Transient conduction (D) Steady state conduction

Last Answer : (C) Transient conduction

Fourier's law applies to the heat transfer by (A) Convection (B) Radiation (C) Conduction (D) All (A), (B) & (C)

Description : Fourier's law applies to the heat transfer by (A) Convection (B) Radiation (C) Conduction (D) All (A), (B) & (C)

Last Answer : (C) Conduction

In which mode of heat transfer, the Biot number is important? (A) Transient heat conduction (B) Natural convection (C) Forced convection (D) Radiation

Description : In which mode of heat transfer, the Biot number is important? (A) Transient heat conduction (B) Natural convection (C) Forced convection (D) Radiation

Last Answer : (A) Transient heat conduction

Mode of heat transfer in which the fluid moves under the influence of changes in fluid pressure produced by external work is called (A) Radiation (B) Natural convection (C) Forced convection (D) Conduction

Description : Mode of heat transfer in which the fluid moves under the influence of changes in fluid pressure produced by external work is called (A) Radiation (B) Natural convection (C) Forced convection (D) Conduction

Last Answer : (C) Forced convection

Mode of heat transfer involved in the cooling of air cooled internal combustion engine is (A) Conduction(B) Natural convection(C) Forced convection(D) None of these

Description : Mode of heat transfer involved in the cooling of air cooled internal combustion engine is (A) Conduction (B) Natural convection (C) Forced convection (D) None of these

Last Answer : (B) Natural convection

When warm and cold liquids are mixed, the heat transfer is mainly by (A) Conduction (B) Convection (C) Radiation (D) Both (A) & (C

Description : When warm and cold liquids are mixed, the heat transfer is mainly by (A) Conduction (B) Convection (C) Radiation (D) Both (A) & (C

Last Answer : (B) Convection

If heat transfer rate varies with the time, it is termed as (A) Forced convection (B) Steady state conduction (C) Monochromatic radiation (D) None of these

Description : If heat transfer rate varies with the time, it is termed as (A) Forced convection (B) Steady state conduction (C) Monochromatic radiation (D) None of these

Last Answer : (D) None of these

In pipe flow, heat is transferred from hot wall to the liquid by(A) Conduction only (B) Forced convection only (C) Forced convection and conduction (D) Free and forced convection

Description : In pipe flow, heat is transferred from hot wall to the liquid by(A) Conduction only (B) Forced convection only (C) Forced convection and conduction (D) Free and forced convection

Last Answer : (C) Forced convection and conduction

View factor is important in heat transfer by (A) Steady state conduction (B) Natural convection (C) Forced convection (D) Radiation

Description : View factor is important in heat transfer by (A) Steady state conduction (B) Natural convection (C) Forced convection (D) Radiation

Last Answer : (D) Radiation

Pick out the wrong statement. (A) Fluid movement under the influence of buoyant forces resulting from change in density takes place in case of natural convection (B) The ratio NNu /NRe . Npr is called the Stanton number (C) The Peclet number is a measure of the ratio of energy transport by convection to that by conduction (D) The Colburn jH factor for heat transfer is given by Nst Npr

Description : Pick out the wrong statement. (A) Fluid movement under the influence of buoyant forces resulting from change in density takes place in case of natural convection (B) The ratio NNu /NRe . Npr is ... convection to that by conduction (D) The Colburn jH factor for heat transfer is given by Nst Npr

Last Answer : (D) The Colburn jH factor for heat transfer is given by Nst Npr

When the ratio of the Grashoff number and to the square of Reynolds number is one, the dominant mechanism of heat transfer is: (A) Free convection (B) Entry length problem in laminar forced conduction (developing thermal boundary layer) (C) Mixed convection (both free and forced) (D) Forced convection

Description : When the ratio of the Grashoff number and to the square of Reynolds number is one, the dominant mechanism of heat transfer is: (A) Free convection (B) Entry length problem in laminar forced ... (developing thermal boundary layer) (C) Mixed convection (both free and forced) (D) Forced convection

Last Answer : (C) Mixed convection (both free and forced)

Heat transfer by __________ may not necessarily require the presence of a medium. (A) Conduction (B) Natural convection (C) Forced convection (D) Radiation

Description : Heat transfer by __________ may not necessarily require the presence of a medium. (A) Conduction (B) Natural convection (C) Forced convection (D) Radiation

Last Answer : (D) Radiation

Pick out the correct statement. (A) 1 kcal/hr.m.°C is equal to 1 BTU/hr. ft.°F (B) In steady state heat conduction, the only property of the substance which determines the temperature distribution, is the thermal conductivity (C) In unsteady state heat conduction, heat flows in the direction of temperature rise (D) In heat transfer by forced convection, Grashoff number is very important

Description : Pick out the correct statement. (A) 1 kcal/hr.m.°C is equal to 1 BTU/hr. ft.°F (B) In steady state heat conduction, the only property of the substance which determines the ... in the direction of temperature rise (D) In heat transfer by forced convection, Grashoff number is very important

Last Answer : (B) In steady state heat conduction, the only property of the substance which determines the temperature distribution, is the thermal conductivity

In furnaces operating at very high temperature (say) 1250°C, e.g. soaking pit), the maximum heat transfer takes place by (A) Conduction (B) Convection (C) Radiation (D) Cannot be predicted

Description : In furnaces operating at very high temperature (say) 1250°C, e.g. soaking pit), the maximum heat transfer takes place by (A) Conduction (B) Convection (C) Radiation (D) Cannot be predicted

Last Answer : (C) Radiation

In reverberatory furnace, charge is heated mainly by (A) Conduction (B) Natural convection (C) Radiation of heat from the roof of the combustion chamber (D) None of these

Description : In reverberatory furnace, charge is heated mainly by (A) Conduction (B) Natural convection (C) Radiation of heat from the roof of the combustion chamber (D) None of these

Last Answer : (C) Radiation of heat from the roof of the combustion chamber

Maximum heat transfer in high temperature furnaces is by (A) Conduction (B) Convection (C) Radiation (D) Either (A), (B) or (C); depends on the type of furnace

Description : Maximum heat transfer in high temperature furnaces is by (A) Conduction (B) Convection (C) Radiation (D) Either (A), (B) or (C); depends on the type of furnace

Last Answer : (C) Radiation

In salt bath furnace, heat is transferred to the charge mainly by (A) Conduction (B) Convection (C) Radiation (D) None of these

Description : In salt bath furnace, heat is transferred to the charge mainly by (A) Conduction (B) Convection (C) Radiation (D) None of these

Last Answer : (A) Conduction

Gibbs phase rule finds application, when heat transfer occurs by (A) Conduction (B) Convection (C) Radiation (D) Condensation

Description : Gibbs phase rule finds application, when heat transfer occurs by (A) Conduction (B) Convection (C) Radiation (D) Condensation

Last Answer : (D) Condensation

In a furnace with heating element temperature at 1700°C, the dominant mechanism of heat transfer will be (A) Conduction (B) Radiation (C) Natural convection (D) Forced convection

Description : In a furnace with heating element temperature at 1700°C, the dominant mechanism of heat transfer will be (A) Conduction (B) Radiation (C) Natural convection (D) Forced convection

Last Answer : (B) Radiation

Heat transfer by __________ is almost absent in case of fluidised bed drying operation. (A) Radiation (B) Conduction (C) Convection (D) Both (B) & (C)

Description : Heat transfer by __________ is almost absent in case of fluidised bed drying operation. (A) Radiation (B) Conduction (C) Convection (D) Both (B) & (C)

Last Answer : A) Radiation

Heat transfer to the water wall in a high pressure water wall type boiler furnace is mainly by (A) Conduction (B) Convection (C) Radiation (D) Both 'a' & 'b'

Description : Heat transfer to the water wall in a high pressure water wall type boiler furnace is mainly by (A) Conduction (B) Convection (C) Radiation (D) Both 'a' & 'b'

Last Answer : Option C

The critical radius 'r' of insulation on a pipe is given by (A) r = 2k/h (B) r = k/h (C) r = k/2h (D) r = h/k

Description : The critical radius 'r' of insulation on a pipe is given by (A) r = 2k/h (B) r = k/h (C) r = k/2h (D) r = h/k

Last Answer : (B) r = k/h

In the free convection regime of pool boiling, the heat flux is proportional to (A) Δt 1/2 (B) Δt 2 (C) Δt 5/4 (D) Δt

Description : In the free convection regime of pool boiling, the heat flux is proportional to (A) Δt 1/2 (B) Δt 2 (C) Δt 5/4 (D) Δt

Last Answer : (C) Δt 5/4

A steam carrying pipeline is insulated with two layers of insulating materials with the inferior insulation material forming the inner part. If the two insulating layers are interchanged, the heat conducted will (A) Increase (B) Decrease (C) Remain unaffected (D) May increase or decrease; depends on the thickness of each layer

Description : A steam carrying pipeline is insulated with two layers of insulating materials with the inferior insulation material forming the inner part. If the two insulating layers are interchanged, the heat conducted ... ) Remain unaffected (D) May increase or decrease; depends on the thickness of each layer

Last Answer : Option C

Which form of heat transfer travels the fastest,convection or conduction?

Description : Which form of heat transfer travels the fastest,convection or conduction?

Last Answer : Conductor. A solid object is much better at conducting than gas, that’s why wires are wired. Air has a higher resitance to change, but also changes more than a static object, with different currents and influencing variables like humidity, barometric pressure etc.

By which of the following methods could a cup of hot coffee lose heat if placed on a metal table in a room? (a) Conduction and radiation (b) Conduction and convection (c) Convection and radiation (d) Conduction, convection, radiation and evaporation

Description : By which of the following methods could a cup of hot coffee lose heat if placed on a metal table in a room? (a) Conduction and radiation (b) Conduction and convection (c) Convection and radiation (d) Conduction, convection, radiation and evaporation

Last Answer : Ans:(d)

By what process is heat transmitted from the filament of an evacuated electric bulb to the glass? (a) Conduction (b) Convection (c) Radiation (d) Heat cannot be transmitted through vacuum

Description : By what process is heat transmitted from the filament of an evacuated electric bulb to the glass? (a) Conduction (b) Convection (c) Radiation (d) Heat cannot be transmitted through vacuum

Last Answer : Ans:(c)

Even after sunset, the air near the Earth's surface continue to receive heat due to – (1) Insolation (2) Terrestrial Radiation (3) Conduction (4) Convection

Description : Even after sunset, the air near the Earth's surface continue to receive heat due to – (1) Insolation (2) Terrestrial Radiation (3) Conduction (4) Convection

Last Answer : (2) Terrestrial Radiation Explanation: Even after the sunset when the sun goes down, the incoming radiation from the sun stops, but there is still a lot of radiation that has been absorbed ... i.e. terrestrial radiation heats up the atmosphere more than the incoming solar radiation i.e. insolation

Transfer of heat energy from a heater coil to the cooking vessel takes place through the process of- (1) Convection only (2) Conduction and convection only (3) Radiation and convection only (4) Convection, conduction and radiation

Description : Transfer of heat energy from a heater coil to the cooking vessel takes place through the process of- (1) Convection only (2) Conduction and convection only (3) Radiation and convection only (4) Convection, conduction and radiation

Last Answer : (3) Radiation and convection only Explanation: Conduction is the transfer of heat energy by direct contact, convection is the movement of heat by actual motion of matter; radiation is the transfer of energy with the help of electromagnetic waves.

Heat is transmitted from higher temperature to lower temperature through the actual motion of the molecules in – (1) Conduction (2) Convection (3) Radiation (4) Both conduction and convection

Description : Heat is transmitted from higher temperature to lower temperature through the actual motion of the molecules in – (1) Conduction (2) Convection (3) Radiation (4) Both conduction and convection

Last Answer : (2) Convection Explanation: The process of heat transfer from one place to an-other place without the movement of particles is called conduction Example: Heat transfer through Metal rods. On the ... heated particles of the substance. The fluids (liquids and gases) are heated by this process.

Heat is transmitted from higher temperature to lower temperature through the actual motion of the molecules in - (1) Conduction (2) Convection (3) Radiation (4) Both conduction and convection

Description : Heat is transmitted from higher temperature to lower temperature through the actual motion of the molecules in - (1) Conduction (2) Convection (3) Radiation (4) Both conduction and convection

Last Answer : (2) Convection Explanation: The process of heat transfer from one place to another place without the movement of particles is called conduction,

Heat transfer horizontally within the atmosphere is called – (1) Conduction (2) Convection (3) Absorption (4) Advection

Description : Heat transfer horizontally within the atmosphere is called – (1) Conduction (2) Convection (3) Absorption (4) Advection

Last Answer : (4) Advection Explanation: Convection transfers heat vertically into the atmosphere. In order for heat to be transferred to other regions, it must be transferred horizontally by the wind. The horizontal ... advection is the transport of pollutants or silt in a river by bulk water flow downstream.

Heat from the sun reaches earth by the process of – (1) Conduction (2) Convection (3) Radiation (4) All of the above

Description : Heat from the sun reaches earth by the process of – (1) Conduction (2) Convection (3) Radiation (4) All of the above

Last Answer : (3) Radiation Explanation: In physics, radiation is a process in which energetic particles or energetic waves travel through vacuum, or through mattercontaining media that are not required for their propagation.