what is bigger 0.015 or 0.01?

what is bigger 0.015 or 0.01?
by

1 Answer

Answer :

0.015 > 0.010
by

Related questions

What number is bigger 3.01 or 3.10?

Description : What number is bigger 3.01 or 3.10?

Last Answer : 3.1

square cross section b/h/h'=400/400/40mm with a reinforcement ratio of p=0.015 is loaded for action forces of axial load plus uniaxial bending.the column is to be made of C25/30 concrete & S-460 steel.check whether the column AB is short or long?

Description : square cross section b/h/h'=400/400/40mm with a reinforcement ratio of p=0.015 is loaded for action forces of axial load plus uniaxial bending.the column is to be made of C25/30 concrete & S-460 steel.check whether the column AB is short or long?

Last Answer : 10001/999900

Percentage of the heavy water in ordinary water is around (A) 0.015 (B) 7.54 (C) 0.71 (D) 32.97

Description : Percentage of the heavy water in ordinary water is around (A) 0.015 (B) 7.54 (C) 0.71 (D) 32.97

Last Answer : (A) 0.015

Percentage of heavy water in ordinary water is around (A) 0.015 (B) 7.54 (C) 0.71 (D) 32.97

Description : Percentage of heavy water in ordinary water is around (A) 0.015 (B) 7.54 (C) 0.71 (D) 32.97

Last Answer : (A) 0.015

Percentage of U-238 in natural uranium is around (A) 0.71 (B) 99.29 (C) 0.015 (D) 29.71

Description : Percentage of U-238 in natural uranium is around (A) 0.71 (B) 99.29 (C) 0.015 (D) 29.71

Last Answer : (B) 99.29

Maximum permissible sulphur content in steel is __________ percent. (A) 0.015 (B) 0.055 (C) 0.505 (D) 0.805

Description : Maximum permissible sulphur content in steel is __________ percent. (A) 0.015 (B) 0.055 (C) 0.505 (D) 0.805

Last Answer : (B) 0.055

Mean drift velocity of electron in a copper wire having cross-sectional area 5.0 × 10-6 m2 carrying current of 1 A and having number density 8.5 × 1028 m3 is A. 0.015 mm s-1 B. 0.1 mm s-1 C. 0.5 mm s-1 D. 0.25 mm s-1

Description : Mean drift velocity of electron in a copper wire having cross-sectional area 5.0 × 10-6 m2 carrying current of 1 A and having number density 8.5 × 1028 m3 is A. 0.015 mm s-1 B. 0.1 mm s-1 C. 0.5 mm s-1 D. 0.25 mm s-1

Last Answer : 0.015 mm s-1

A level when set up 25 m from peg A and 50 m from peg B reads 2.847 on a staff held on A and 3.462 on a staff held on B, keeping bubble at its centre while reading. If the reduced levels of A and B are 283.665 m and 284.295 m respectively, the collimation error per 100 m is (A) 0.015 m (B) 0.030 m (C) 0.045 m (D) 0.060 m

Description : A level when set up 25 m from peg A and 50 m from peg B reads 2.847 on a staff held on A and 3.462 on a staff held on B, keeping bubble at its centre while reading. If the reduced levels of A and B are 283.665 m ... collimation error per 100 m is (A) 0.015 m (B) 0.030 m (C) 0.045 m (D) 0.060 m

Last Answer : (D) 0.060 m

A structure is erected on an impervious clay whose thickness is 12 m. Drainage is possible both at upper and lower surfaces. Coefficient of consolidation is 0.015 cm2 per minute. For attaining 50% consolidation with a time factor 0.20, the number of days required (A) 3233 (B) 3123 (C) 33331 (D) 3313

Description : A structure is erected on an impervious clay whose thickness is 12 m. Drainage is possible both at upper and lower surfaces. Coefficient of consolidation is 0.015 cm2 per minute. For attaining 50% consolidation with a ... 20, the number of days required (A) 3233 (B) 3123 (C) 33331 (D) 3313

Last Answer : Answer: Option C

Natural water contains approximately __________ percent of heavy water. (A) 0.015 (B) 0.71 (C) 1.2 (D) 3.5

Description : Natural water contains approximately __________ percent of heavy water. (A) 0.015 (B) 0.71 (C) 1.2 (D) 3.5

Last Answer : A) 0.015

Maximum permissible sulphur content in steel is __________ percent. (A) 0.015 (B) 0.055 (C) 0.505

Description : Maximum permissible sulphur content in steel is __________ percent. (A) 0.015 (B) 0.055 (C) 0.505

Last Answer : Option A

Maximum permissible sulphur content in steel is __________ percent. (A) 0.015 (B) 0.055 (C) 0.505 (D) 0.805

Description : Maximum permissible sulphur content in steel is __________ percent. (A) 0.015 (B) 0.055 (C) 0.505 (D) 0.805

Last Answer : Option A

How could you find the y-coordinate of the midpoint of a vertical line segment with endpoint at (00) and (015)?

Description : How could you find the y-coordinate of the midpoint of a vertical line segment with endpoint at (00) and (015)?

Last Answer : If you mean endpoints of (0, 0) and (0, 15) then the midpoint isat (0, 7.5)

What is 015 treas 310 misc pay?

Description : What is 015 treas 310 misc pay?

Last Answer : Teaaaaa

What number is larger .0099 or .015?

Description : What number is larger .0099 or .015?

Last Answer : 0.015 is greater.

When a voltage of 115 VDC is applied to the illustrated circuit with a resistance of 1.74 ohms the current will be _______. EL-0018 A. 66.09 amps B. 116.74 amps C. .026 amps D. .015 amps

Description : When a voltage of 115 VDC is applied to the illustrated circuit with a resistance of 1.74 ohms the current will be _______. EL-0018 A. 66.09 amps B. 116.74 amps C. .026 amps D. .015 amps

Last Answer : Answer: A

Has your iphone/ipod touch been showing weird stuff since 2.0.01 on unlock screen?

Description : Has your iphone/ipod touch been showing weird stuff since 2.0.01 on unlock screen?

Last Answer : Yes, but I ignore them.

in titration of 25 mL of the solution containing Cu2+ with the concentration of 0.01 molar , with SCN – (0.01 Molar) , if we use the indicator that changed its color in PSCN= 9. Calculate the error of titration PKSP(CuSCN) =13.4?

Description : in titration of 25 mL of the solution containing Cu2+ with the concentration of 0.01 molar , with SCN – (0.01 Molar) , if we use the indicator that changed its color in PSCN= 9. Calculate the error of titration PKSP(CuSCN) =13.4?

Last Answer : just the color change from the indicator. Thus, a careful selection of the indicator will reduce the indicator error. For example, if the equivalence point is at a pH of 8.4, then the ... are in the range of aqueous pH changes are of little use. Instead, the titrant and indicator used

(0.2+0.01)(0.2-0.01)=?

Description : (0.2+0.01)(0.2-0.01)=?

Last Answer : 0.0399

`0.01` M HA (aq.) is `2%` dissociated, `[OH^(-)]` of solution is :

Description : `0.01` M HA (aq.) is `2%` dissociated, `[OH^(-)]` of solution is :

Last Answer : `0.01` M HA (aq.) is `2%` dissociated, `[OH^(-)]` of solution is : A. `2xx10^(-4)` B. `10^(-8)` C. `5xx10^(-11)` D. `2xx10^(-12)`

0.01 mole of iodoform `(CHI_(3))` reacts with Ag to produce a gas whose volume at NTP is `2CHI_(3)+6Ag to6Agl(s)+C_(2)H_(2)(g)`

Description : 0.01 mole of iodoform `(CHI_(3))` reacts with Ag to produce a gas whose volume at NTP is `2CHI_(3)+6Ag to6Agl(s)+C_(2)H_(2)(g)`

Last Answer : 0.01 mole of iodoform `(CHI_(3))` reacts with Ag to produce a gas whose volume at NTP is `2CHI_(3)+6Ag ... mL B. 112 mL C. 336 mL D. None of these

Gold numbers of some colloids are : Gelatin : 0.005 - 0.01 , Gum Arabic : 0.15 - 0.25, Oleate : 0.04 - 1.0, Starch : 15 - 25. Which among these is a b

Description : Gold numbers of some colloids are : Gelatin : 0.005 - 0.01 , Gum Arabic : 0.15 - 0.25, Oleate : 0.04 - 1.0, Starch : 15 - 25. Which among these is a b

Last Answer : Gold numbers of some colloids are : Gelatin : 0.005 - 0.01 , Gum Arabic : 0.15 - 0.25, Oleate ... ? A. Gelatin B. Starch C. Gum Arabic D. Oleate

Gold numbers of protective colloids A, B, C and D are `0.50, 0.01, 0.10` and `0.005` respectively. The correct order of their protective powers is

Description : Gold numbers of protective colloids A, B, C and D are `0.50, 0.01, 0.10` and `0.005` respectively. The correct order of their protective powers is

Last Answer : Gold numbers of protective colloids A, B, C and D are `0.50, 0.01, 0.10` and `0.005` respectively. The correct ... lt A lt C` D. `D lt A lt C lt B`

25 mL of a solution of `Fe^(2+)` ions was titrated with a solution of the oxidizing agent `Cr_(2)O_(7)^(2-)` . 50 mL of 0.01 M `K_(2)Cr_(2)O_(7)` solu

Description : 25 mL of a solution of `Fe^(2+)` ions was titrated with a solution of the oxidizing agent `Cr_(2)O_(7)^(2-)` . 50 mL of 0.01 M `K_(2)Cr_(2)O_(7)` solu

Last Answer : 25 mL of a solution of `Fe^(2+)` ions was titrated with a solution of the oxidizing agent `Cr_(2)O_ ... is the molarity of the `Fe^(2+)` solution ?

Co-ordination number of Cr in `CrCl_(3^.)5H_(2)O` is six. The volume of 0.1 N `AgNO_(3)` needed to ppt. the chorine in outer sphere in 200 ml of 0.01

Description : Co-ordination number of Cr in `CrCl_(3^.)5H_(2)O` is six. The volume of 0.1 N `AgNO_(3)` needed to ppt. the chorine in outer sphere in 200 ml of 0.01

Last Answer : Co-ordination number of Cr in `CrCl_(3^.)5H_(2)O` is six. The volume of 0.1 N `AgNO_(3)` ... of 0.01 M solution of he possible complex es is/are:

The acceleration due to gravity is determined by using a simple pendulum of length l = (100 ± 0.1) cm. If its time period is T = (2 ± 0.01)

Description : The acceleration due to gravity is determined by using a simple pendulum of length l = (100 ± 0.1) cm. If its time period is T = (2 ± 0.01)

Last Answer : The acceleration due to gravity is determined by using a simple pendulum of length l = (100 ... the maximum percentage error in the measurement of g.

The force between two long parallel wires A and B carrying current is `0.004 Nm^(-1)`. The conductors are 0.01 m apart. If the current in conductor A

Description : The force between two long parallel wires A and B carrying current is `0.004 Nm^(-1)`. The conductors are 0.01 m apart. If the current in conductor A

Last Answer : The force between two long parallel wires A and B carrying current is `0.004 Nm^(-1)`. The conductors are 0.01 m ... . `50 A ` C. `10 A` D. `100 A`

A galvanometer having internal resistance `10 Omega` required `0.01` A for a full scale deflection. To convert this galvanometer to a voltmeter of ful

Description : A galvanometer having internal resistance `10 Omega` required `0.01` A for a full scale deflection. To convert this galvanometer to a voltmeter of ful

Last Answer : A galvanometer having internal resistance `10 Omega` required `0.01` A for a full scale deflection. ... Omega` in series D. `12010 Omega` in parallel

Is 0.029 greater than 0.01?

Description : Is 0.029 greater than 0.01?

Last Answer : Yes

Why is 0.1 and 0.01 not equal to each other?

Description : Why is 0.1 and 0.01 not equal to each other?

Last Answer : The first is one tenth, the second is one hundredth, ten timesless.

What is 8.2762 rounded to the nearest 0.01?

Description : What is 8.2762 rounded to the nearest 0.01?

Last Answer : It is 8.28 when rounded to the nearest hundredth

In a number sequence what is 0.001 0.01 0.1 1?

Description : In a number sequence what is 0.001 0.01 0.1 1?

Last Answer : Each successive number is ten times the one before it.

What is the Next number in the sequence 0.001 0.01 0.1 1?

Description : What is the Next number in the sequence 0.001 0.01 0.1 1?

Last Answer : 10

What does a correlation coefficient of r -0.01 imply about the graph of a data set?

Description : What does a correlation coefficient of r -0.01 imply about the graph of a data set?

Last Answer : It suggests that there is very little evidence of a linear relationship between the variables.

1.01 or 0.11?

Description : 1.01 or 0.11?

Last Answer : I think 1.01 is greater than 0.11

What is the midpoint of 0 and 0.01?

Description : What is the midpoint of 0 and 0.01?

Last Answer : pls help and have a fun time finding it.

The percentage of fluoride present in dental enamel is (A) 0.01–0.02 (B) 0.05–0.10 (C) 0.15–0.20 (D) 0.20–0.40

Description : The percentage of fluoride present in dental enamel is (A) 0.01–0.02 (B) 0.05–0.10 (C) 0.15–0.20 (D) 0.20–0.40

Last Answer : Answer : A

The percentage of fluoride present in normal bone is (A) 0.01–0.03 (B) 0.04–0.08 (C) 0.10–0.12 (D) 0.15–0.2

Description : The percentage of fluoride present in normal bone is (A) 0.01–0.03 (B) 0.04–0.08 (C) 0.10–0.12 (D) 0.15–0.2

Last Answer : Answer : A

Safe and adequate daily dietary intake of chromium in adults in mg is (A) 0.01–0.02 (B) 0.02–0.03 (C) 0.03–0.04 (D) 0.05–0.2

Description : Safe and adequate daily dietary intake of chromium in adults in mg is (A) 0.01–0.02 (B) 0.02–0.03 (C) 0.03–0.04 (D) 0.05–0.2

Last Answer : Answer : D

In a food chain, the solar energy utilized by plants is only (1) 10 per cent (2) 1 per cent (3) 0.1 per cent (4) 0.01 per cent

Description : In a food chain, the solar energy utilized by plants is only (1) 10 per cent (2) 1 per cent (3) 0.1 per cent (4) 0.01 per cent

Last Answer : (3) 0.1 per cent Explanation: Plants, on average, capture only about 0.1 percent of the solar energy reaching Earth. However, it does not mean that the other 99.9 percent is a ... energy being changed from light to chemical energy is lost as heat that dissipates into the surrounding environment.

Maximum permissible concentration of copper in drinking water in mg/L, is – (1) 0.01 (2) 0.05 (3) 1.0 (4) 2.0

Description : Maximum permissible concentration of copper in drinking water in mg/L, is – (1) 0.01 (2) 0.05 (3) 1.0 (4) 2.0

Last Answer : (3) 1.0 Explanation: The 1959 WHO International Standards for Drinking Water suggested that concentrations of copper greater than 1.5 mg/litre would markedly impair the potability of the water. However, ... 1.0 mg/litre was established for copper, based on its laundry and other staining properties.

The percentage of carbon in cost iron is (1) 0.01 to 0.25 (2) 0.5 to 1.5 (3) 6 to 3 (4) 3 to 5

Description : The percentage of carbon in cost iron is (1) 0.01 to 0.25 (2) 0.5 to 1.5 (3) 6 to 3 (4) 3 to 5

Last Answer : (4) 3 to 5 Explanation: Cast Iron is a hard, brittle, nonmalleable iron-carbon alloy, cast into shape. It contains 2 to 4.5 percent carbon, 0.5 to 3 percent silicon, and lesser amounts of sulfur, manganese, and phosphorus.

Threshold limit value of copper in the atmospheric air is - (1) 0.001 mg/m3 (2) 0.01 mg/m3 (3) 1.0 mg/m3 (4) 5.0 mg/m3

Description : Threshold limit value of copper in the atmospheric air is - (1) 0.001 mg/m3 (2) 0.01 mg/m3 (3) 1.0 mg/m3 (4) 5.0 mg/m3

Last Answer : (3) 1.0 mg/m3 Explanation: Inspirable copper dust takes a predominantly fibrous effect. The ALV of copper aerosol in the workplace atmosphere is 0.5 mg/m3, while the threshold limit value (TLV) is 1.0 mg/m3.

Maximum permissible concentration of copper in drinking water in mg/L is - (1) 0.01 (2) 0.05 (3) 1.0 (4) 2.0

Description : Maximum permissible concentration of copper in drinking water in mg/L is - (1) 0.01 (2) 0.05 (3) 1.0 (4) 2.0

Last Answer : (3) 1.0 Explanation: In the first edition of the Guidelines for Drinking Water Quality, published in 1984, a guideline value of 1.0 mg/litre was established for copper, based on its laundry and other staining properties.

Hard steel contains – (1) 2 to 5 per cent carbon (2) 0.5 to 1.5 per cent carbon (3) 0.1 to 0.4 per cent carbon (4) 0.01 to 0.04 per cent carbon

Description : Hard steel contains – (1) 2 to 5 per cent carbon (2) 0.5 to 1.5 per cent carbon (3) 0.1 to 0.4 per cent carbon (4) 0.01 to 0.04 per cent carbon

Last Answer : (2) 0.5 to 1.5 per cent carbon Explanation: The term hardened steel is often used for a medium or high carbon steel that has been given the heat treatments of quenching followed by ... In contrast, the same steel composition in annealed state will be softer as required for forming and machining.

A micron is equal to – (1) 0.1 ram (2) 0.01 mm (3) 0.001 mm (4) 0.0001 mm

Description : A micron is equal to – (1) 0.1 ram (2) 0.01 mm (3) 0.001 mm (4) 0.0001 mm

Last Answer : (3) 0.001 mm Explanation: 1 micron = 0.001 millimeters. A micrometre (micron) is one-millionth of a metre (or one-thousandth of a millimetre, 0.001 mm). Its unit symbol in the ... is a common unit of measurement for wavelengths of infrared radiation as well as sizes of cells and bacteria.

Period of oscillation of 3 cm microwaves in seconds is (1) 1 x 10¹⁰ (2) 1 x 10⁻¹⁰ (3) 0.01 (4) 0.001

Description : Period of oscillation of 3 cm microwaves in seconds is (1) 1 x 10¹⁰ (2) 1 x 10⁻¹⁰ (3) 0.01 (4) 0.001

Last Answer : (2) 1 x 10⁻¹⁰ Explanation: The period of oscillation of 3 cm microwaves is 1 x 10^-10 (Physics, Volume 1, by Halliday). The period of oscillation is the smallest interval of time in which a system undergoing oscillation returns to the state it was in at the beginning of the oscillation.

Hazen’s formula VS = 418 (GS – Gw)d [(3T + 70)/100] is used for the settlement velocity of the particles of diameter A. Less than 0.01 mm B. Less than 0.05 mm C. Less than 0.1 mm D. Greater than 0.1 mm

Description : Hazen’s formula VS = 418 (GS – Gw)d [(3T + 70)/100] is used for the settlement velocity of the particles of diameter A. Less than 0.01 mm B. Less than 0.05 mm C. Less than 0.1 mm D. Greater than 0.1 mm

Last Answer : ANS: D

An electrical component is connected across a 120 volt 60 hertz AC supply. What is the current drawn by the component if the impedance is 200 ohms? A. 0.01 amperes B. 0.60 amperes C. 1.67 amperes D. 100 amperes

Description : An electrical component is connected across a 120 volt 60 hertz AC supply. What is the current drawn by the component if the impedance is 200 ohms? A. 0.01 amperes B. 0.60 amperes C. 1.67 amperes D. 100 amperes

Last Answer : Answer: B

A conductor with a cross-sectional area of one circular mil would have a diameter of _____________. A. 0.1 inches B. 0.01 inches C. 0.001 inches D. 0.0001 inches

Description : A conductor with a cross-sectional area of one circular mil would have a diameter of _____________. A. 0.1 inches B. 0.01 inches C. 0.001 inches D. 0.0001 inches

Last Answer : Answer: C