Description : During turning the traction while operating MB plough a) Plough should be lifted b) Plough should not be lifted c) Stop the tractor and lift the plough d) Unable to lift Ans. a
Last Answer : ans a
Description : Which of the following is not a tractor drawn primary tillage tool? 1. Disc plough 2. rotavator 3. Country plough 4. Bar harrow
Last Answer : ans 3
Description : Which of the following is not a tractor drawn tillage tool? 1. Cultivator 2. Augar plough 3. Harrow 4. Plank
Last Answer : ans 4
Description : is not a tractor drawn tillage tool A. Cultivator B. Augar plough C. Narrow D. Plank
Last Answer : Plank
Description : is not a tractor drawn tillage tool: a) Cultivator c) Augar plough b) Harrow d) Plank
Description : .Increase length of a land slide of a one bottom right hand mould board plough will a) Increase the amount of offset on tractor b) Decrease the amount of offset c) No affect d) Affect Completely
Last Answer : c) No affect
Description : the time taken to plough one acre farm with 35 hp tractor is : A)60 minutes b)75 minutes C)90 minutes d)120 minutes
Last Answer : b)75 minutes
Description : Give two uses of a plough?
Last Answer : fhvc
Description : What are common uses of a John Deere 240 tractor?
Last Answer : The JOHN DEERe 240 tractor is used for mowing the lawn. It comes with garden tractor parts as well. For more information go to www.tractor-review.com/john-deere-240.html.
Description : Why were metals, writing, the wheel and the plough important for the Harappans? -Hindi
Last Answer : answer:
Description : Where has the use of plough been evidenced? -Do You Know?
Description : What is plough Write it's working principle?
Last Answer : Occupation
Description : Why does a farmer plough his fields in summer? (a) To prevent alkalinity of soil (b) To prevent acidity of soil (c) To prevent the surface from becoming hard (d) To fertilize the soil shop.ssbcrack.com
Last Answer : Ans: (c)
Description : Of the following statements about the major soil types, the incorrect one is : (a) alluvial soils are easy to plough (b) red soils are rich in phosphorus, nitrogen and lime content ( ... regions which receive heavy seasonal rainfall (d) black soil is highly retentive of moisture and very productive
Last Answer : Ans: (b)
Description : Rotary plough is used for
Last Answer : Ans.Cut and pulverizes the light soil.
Description : Disc plough is used for
Last Answer : Ans.Deep ploughing in grassed field
Description : Ridge plough is used for
Last Answer : Ans.Earthing-up and form ridges and furrows.
Description : Very often, the farmers add lime to the soil before ploughing because (a) high concentration of lime aids the plant growth (b) lime takes up the extra moisture of the soil (c) the soil becomes soft and it becomes easy to plough (d) lime decreases the acidity of the soil
Last Answer : Ans:(d)
Description : Where has the use of plough been evidenced?
Last Answer : Kalibangan
Description : The instrument, which is used for sowing of seed with fertilizer together at a time, is— (A) Seed drill (B) Dibbler (C) Seed sowing behind plough (D) Ferti-cum Seed drill
Last Answer : (D) Ferti-cum Seed drill
Description : Tilt angle of a disc plough is generally— (A) 10° (B) 15° (C) 20° (D) 45°
Last Answer : (D) 45°
Description : The draft of ‘Victory plough’ is— (A) 80-100 kg (B) 40-50 kg(C) 70-80 kg (D) 10-20 kg
Last Answer : (A) 80-100 kg
Description : What is the field capacity of an Indigenous Plough? [a] 0.4 ha per day of 8 hours [b] 0.6 ha per day of 8 hours [c] 0.8 ha per day of 8 hours [d] 0.2 ha per day of 8 hours
Last Answer : [a] 0.4 ha per day of 8 hours
Description : The disc angle of a disc plough ranges from? [a] 40-45 degree [b] 30-35 degree [c] 20-25 degree [d] 45-50 degree [e] None of the above
Last Answer : [a] 40-45 degree
Description : A mould board of MB plough is made of? a Cast iron b Chilled cast iron c Mild steel d Soft centre steel
Last Answer : d Soft centre steel
Description : Which of the following crops require ridging plough for soil preparation? a. Lemo b. Okra c. Beans d. Potato
Last Answer : d. Potato
Description : Sub soiler plough is best suited for — a. Deep plouging b. Breaking hard pan c. Making ditches d. Inter cultivation
Last Answer : b. Breaking hard pan
Description : Which plough will be used for maximum moisture conservation ? a. M B Plugh b. Cultivator c. Chisel plough d. Disc harrow
Last Answer : c. Chisel plough
Description : Subsoil plough is useful for — a. for deep ploughing b. to break hard pan of soil c. Shallow ploughin
Last Answer : b. to break hard pan of soil
Description : Penetration of disc plough can be improved by a. Increasing disc angle b. Decreasing tilt angle c. Both a & b d. None of these
Last Answer : b. Decreasing tilt angle
Description : In comparison to MB plough, the draft is less in disc plough because a) It roll over the soil instead of sliding b) It has lower contact area c) It has larger cutting edge d) None of these Ans. a
Description : The function of landside in mb plough is to a) Resist the side draft force b) Increase pulverization c) Decrease draft d) All of these Ans. a
Description : Working width of disc plough can be increased by a) Disc angle b) Gang angle c) Vertical suction d) Horizontal clearance Ans. a
Description : The adjustment in MB plough for increasing the depth of operation a) Vertical suction b) Horizontal suction c) Gang angle d) Disc angle Ans. a
Description : A furrow cross-section in a country plough is commonly a) Circular b) Triangular c) Rectangular d) Trapezoidal
Last Answer : ans b
Description : The two primary tillage equipments are 1. MB and disc harrow 2. Disc plough and disc harrow 3. Disc harrow and cultivator 4. MB and subsoiler
Description : Dead furrow is made by 1. One way MB plough 2. 2 way MB plough 3. ridger 4. disc harrow
Last Answer : ans 1
Description : Vertical section of plough influences 1. Pulverization 2. Depth of cut 3. Width of cut 4. direction of pull
Last Answer : ans 2
Description : Power tillers operate most satisfactory with? 1. Rotary tillage 2. Plough 3. Transport carts 4. reapers
Description : Which one of the following is not a secondary tillage tool? 1. Disc Plough 2. Disc harrow 3. Mould Board 4. none of these
Description : Sowing behind the plough can be done by a device known as ……… b. Seed tube c. Plough tube d. None of the above
Last Answer : Ans - a. malobansa
Description : Ridger is also known as riding plough and moulds board plough. a. Single c. Half d. None of the above. Ans - b. Double
Last Answer : Ans - b. Double
Description : This type of plough penetrate deeper than the conventional cultivation machinery and break up the layers of the soil. a. Chisel plough b. Disc plough d. None of the above
Last Answer : Ans - c. sub-soiler plough
Description : It Is used for deep tillage and penetration of soil for storage for rain water in crop root zone. b. Disc plough c. Mould board plough d. None of the above
Last Answer : Ans- a. Chisel plough
Description : plough leaves the soil in rough and more cloddy conditions. b. Mould board c. Both a And b d. None of the above
Last Answer : <!-- [if !supportLists] -->a. <!-- [endif] -->Ans - a. Disc
Description : Disc angle in a standard disc plough varies from a. 25-35 ° c. 45-55 ° d. 55-65 °
Last Answer : Ans - b. 42-45 °
Description : Which one of the following is an accessory to mould board plough? a. Share b. mould board c. frog
Last Answer : <!-- [endif] --> Ans- d. jointer