During turning the traction while operating MB plough a) Plough should be lifted b) Plough should not be lifted c) Stop the tractor and lift the plough d) Unable to lift Ans. a

During turning the traction while operating MB plough a) Plough should be lifted b) Plough should not be lifted c) Stop the tractor and lift the plough d) Unable to lift Ans. a
by

1 Answer

Answer :

ans a
by

Related questions

In comparison to MB plough, the draft is less in disc plough because a) It roll over the soil instead of sliding b) It has lower contact area c) It has larger cutting edge d) None of these Ans. a

Description : In comparison to MB plough, the draft is less in disc plough because a) It roll over the soil instead of sliding b) It has lower contact area c) It has larger cutting edge d) None of these Ans. a

Last Answer : ans a

The function of landside in mb plough is to a) Resist the side draft force b) Increase pulverization c) Decrease draft d) All of these Ans. a

Description : The function of landside in mb plough is to a) Resist the side draft force b) Increase pulverization c) Decrease draft d) All of these Ans. a

Last Answer : ans a

The adjustment in MB plough for increasing the depth of operation a) Vertical suction b) Horizontal suction c) Gang angle d) Disc angle Ans. a

Description : The adjustment in MB plough for increasing the depth of operation a) Vertical suction b) Horizontal suction c) Gang angle d) Disc angle Ans. a

Last Answer : ans a

pressure should be high in front wheel of the tractor because of a) high slippage b) low slippage c) high traction d) easy steer ability Ans. d

Description : pressure should be high in front wheel of the tractor because of a) high slippage b) low slippage c) high traction d) easy steer ability Ans. d

Last Answer : ans d

Differential lock in tractor is used to improve a) Lateral stability b) Braking performance c) Hydraulic lift d) Traction of a wheel

Description : Differential lock in tractor is used to improve a) Lateral stability b) Braking performance c) Hydraulic lift d) Traction of a wheel

Last Answer : Braking performance 

Differential lock in tractor is used to improve a) Lateral stability b) Braking performance c) Hydraulic lift d) Traction of a wheel

Description : Differential lock in tractor is used to improve a) Lateral stability b) Braking performance c) Hydraulic lift d) Traction of a wheel

Last Answer : ans d

The traction on rear wheels can be increased by increasing a) Weight on rear wheels b) Weight on front wheels c) Decreasing inflation pressure d) Both a and c Ans. d

Description : The traction on rear wheels can be increased by increasing a) Weight on rear wheels b) Weight on front wheels c) Decreasing inflation pressure d) Both a and c Ans. d

Last Answer : ans d

pressure should be less in rear wheel as compare to front wheel because of a) high traction b) low draft c) high draft d) none of these Ans. a

Description : pressure should be less in rear wheel as compare to front wheel because of a) high traction b) low draft c) high draft d) none of these Ans. a

Last Answer : ans a

The two primary tillage equipments are 1. MB and disc harrow 2. Disc plough and disc harrow 3. Disc harrow and cultivator 4. MB and subsoiler

Description : The two primary tillage equipments are 1. MB and disc harrow 2. Disc plough and disc harrow 3. Disc harrow and cultivator 4. MB and subsoiler

Last Answer : ans 4

Dead furrow is made by 1. One way MB plough 2. 2 way MB plough 3. ridger 4. disc harrow

Description : Dead furrow is made by 1. One way MB plough 2. 2 way MB plough 3. ridger 4. disc harrow

Last Answer : ans 1

The two primary tillage equipments are A. MB and disc harrow B. Disc plough and disc harrow C. Disc harrow and cultivator. D. MB and. Subscriber

Description : The two primary tillage equipments are A. MB and disc harrow B. Disc plough and disc harrow C. Disc harrow and cultivator. D. MB and. Subscriber

Last Answer : MB and disc harrow

Dead furrow is made by A. One way MB plough. B. 2 way MB plough C. Ridger. D. Disc harrow

Description : Dead furrow is made by A. One way MB plough. B. 2 way MB plough C. Ridger. D. Disc harrow

Last Answer : One way MB plough

The draft requirement in MB plough compared to disc plough for same depth of ploughing is: a) Less c) More b) Equal d) None of these

Description : The draft requirement in MB plough compared to disc plough for same depth of ploughing is: a) Less c) More b) Equal d) None of these

Last Answer : More

The plough bottom as combined unit consist of: a) None of these c) Coulter , jointer and frog b) Beam , handle and MB d) Share, landside , frog and MB

Description : The plough bottom as combined unit consist of: a) None of these c) Coulter , jointer and frog b) Beam , handle and MB d) Share, landside , frog and MB

Last Answer : Share, landside , frog and Mb

Jointer and coulter are the parts of :- A. Disc plough C. Indigenous plough B. Harrow plough D. MB plough

Description : Jointer and coulter are the parts of :- A. Disc plough C. Indigenous plough B. Harrow plough D. MB plough

Last Answer : MB plough

Working width of disc plough can be increased by a) Disc angle b) Gang angle c) Vertical suction d) Horizontal clearance Ans. a

Description : Working width of disc plough can be increased by a) Disc angle b) Gang angle c) Vertical suction d) Horizontal clearance Ans. a

Last Answer : ans a

Ridger is also known as riding plough and moulds board plough. a. Single c. Half d. None of the above. Ans - b. Double

Description : Ridger is also known as riding plough and moulds board plough. a. Single c. Half d. None of the above. Ans - b. Double

Last Answer : Ans - b. Double

Which of the following is not a tractor drawn primary tillage tool? 1. Disc plough 2. rotavator 3. Country plough 4. Bar harrow

Description : Which of the following is not a tractor drawn primary tillage tool? 1. Disc plough 2. rotavator 3. Country plough 4. Bar harrow

Last Answer : ans 3

Which of the following is not a tractor drawn tillage tool? 1. Cultivator 2. Augar plough 3. Harrow 4. Plank

Description : Which of the following is not a tractor drawn tillage tool? 1. Cultivator 2. Augar plough 3. Harrow 4. Plank

Last Answer : ans 4

is not a tractor drawn tillage tool A. Cultivator B. Augar plough C. Narrow D. Plank

Description : is not a tractor drawn tillage tool A. Cultivator B. Augar plough C. Narrow D. Plank

Last Answer : Plank

is not a tractor drawn tillage tool: a) Cultivator c) Augar plough b) Harrow d) Plank

Description : is not a tractor drawn tillage tool: a) Cultivator c) Augar plough b) Harrow d) Plank

Last Answer : Plank

Penetration of a trailed type disc harrow is not affected by a) Size of disc b) Angle of disc c) Weight of disc d) Tractor hydraulic system Ans. d

Description : Penetration of a trailed type disc harrow is not affected by a) Size of disc b) Angle of disc c) Weight of disc d) Tractor hydraulic system Ans. d

Last Answer : Ans. d

Shortening of top link of tractor three-point hitch system a) Increases weight transfer on rear wheels b) Decreases weight transfer on rear wheels c) Increases penetration of implement d) Decreases penetration of implement Ans. d

Description : Shortening of top link of tractor three-point hitch system a) Increases weight transfer on rear wheels b) Decreases weight transfer on rear wheels c) Increases penetration of implement d) Decreases penetration of implement Ans. d

Last Answer :  Ans. d

A tractor seat suspension should have its natural frequency in the range of a) 0.5 to 2.0 Hz b) 2.0 to 4.0 Hz c) 4.0 to 6.0 Hz d) 6.0 to 8.0 Hz Ans. a

Description : A tractor seat suspension should have its natural frequency in the range of a) 0.5 to 2.0 Hz b) 2.0 to 4.0 Hz c) 4.0 to 6.0 Hz d) 6.0 to 8.0 Hz Ans. a

Last Answer : ans a

In tractor engine which of the following is a device in which liquid fuel is converted into gaseous fuel? 1. Piston 2. Carburetor 3. Both 1 and 2 4. none of these ans 1

Description : In tractor engine which of the following is a device in which liquid fuel is converted into gaseous fuel? 1. Piston 2. Carburetor 3. Both 1 and 2 4. none of these ans 1

Last Answer : ans 1

position in tractor is allows you to rest the bucket on the ground without down pressure or lift A. Boat. C. Draft control B. Float. D. None of the above

Description : position in tractor is allows you to rest the bucket on the ground without down pressure or lift A. Boat. C. Draft control B. Float. D. None of the above

Last Answer : Float.

A lift of weight W is lifted by a rope with an acceleration f. If the area of cross-section of the rope is A, the stress in the rope is (A) [W (1 + f/G)]/A (B) (1 - g/f)/A (C) [W (2 + f/G)]/A (D) [W (2 + g/f)]/A

Description : A lift of weight W is lifted by a rope with an acceleration f. If the area of cross-section of the rope  is A, the stress in the rope is  (A) [W (1 + f/G)]/A (B) (1 - g/f)/A (C) [W (2 + f/G)]/A (D) [W (2 + g/f)]/A

Last Answer : (A) [W (1 + f/G)]/A

A mould board of MB plough is made of? a Cast iron b Chilled cast iron c Mild steel d Soft centre steel

Description : A mould board of MB plough is made of? a Cast iron b Chilled cast iron c Mild steel d Soft centre steel

Last Answer : d Soft centre steel

For maximum moisture conservation ploughing is done with A. mb plough b. cultivator c. chisel plough d. dice harrow

Description : For maximum moisture conservation ploughing is done with A. mb plough b. cultivator c. chisel plough d. dice harrow

Last Answer : c. chisel plough

The two primery tillage equipment a. MB plough and disc harrow b. Disc plough and disc harrow c. Disc harrow and cultivetor d. MB plough and subsoiler

Description : The two primery tillage equipment a. MB plough and disc harrow b. Disc plough and disc harrow c. Disc harrow and cultivetor d. MB plough and subsoiler

Last Answer : d. MB plough and subsoiler

Dead furrow is made by: a. One way MB plough b. Two way MB plough c. Ridger d. Disc harrow

Description : Dead furrow is made by: a. One way MB plough b. Two way MB plough c. Ridger d. Disc harrow

Last Answer : a. One way MB plough

A coulter attachment is used with: a. Disc harrow b. Seed drill c. MB plough d. Sub soiler

Description : A coulter attachment is used with: a. Disc harrow b. Seed drill c. MB plough d. Sub soiler

Last Answer : c. MB ploug

.Land shipping become necessary often the following implments is used: a. MB plough b. Disc harrow c. Cultivator d. All of these

Description : .Land shipping become necessary often the following implments is used: a. MB plough b. Disc harrow c. Cultivator d. All of these

Last Answer : a. MB plough

The production of tractor is commenced during 1961-62 ,turning out them A) 880. C) 540 B) 860. D)

Description : The production of tractor is commenced during 1961-62 ,turning out them A) 880. C) 540 B) 860. D) 800

Last Answer : 880

A wheeled tractor hauling unit is working on firm earth. The total loaded weight distribution of this unit is: Drive wheels: 25000 kg Scraper wheels: 10000 kg If the coefficient of traction for wheeled tractor on firm earth is 0.5, the rimpull which this tractor can exert without slipping is (A) 10000 kg (B) 12500 kg (C) 22500 kg (D) 5000 kg

Description : A wheeled tractor hauling unit is working on firm earth. The total loaded weight distribution of this unit is: Drive wheels: 25000 kg Scraper wheels: 10000 kg If the coefficient of traction for wheeled tractor on firm ... without slipping is (A) 10000 kg (B) 12500 kg (C) 22500 kg (D) 5000 kg

Last Answer : (B) 12500 kg

Formula for adding weight (ballast) on tractor tyres working in loose wet soil for good traction a)(km/hr × kg/PTO kw)=540 b)( km/hr × kg/PTO kw)=670 c)( km/hr × kg/PTO HP)=540 d)( km/hr × kg/PTO HP)=670

Description : Formula for adding weight (ballast) on tractor tyres working in loose wet soil for good traction a)(km/hr × kg/PTO kw)=540 b)( km/hr × kg/PTO kw)=670 c)( km/hr × kg/PTO HP)=540 d)( km/hr × kg/PTO HP)=670

Last Answer : a)(km/hr × kg/PTO kw)=540

Does it take MB to run Ans Bangla ?

Description : Does it take MB to run Ans Bangla ?

Last Answer : Yes, of course it takes MB. You can't drive for free.

How to run Ans Bangla completely free i.e. without any MB or money ?

Description : How to run Ans Bangla completely free i.e. without any MB or money ?

Last Answer : Ans Bangla Free Basic does not exist so it cannot be run for free at this moment. However, Free Basic will be added very soon. Then you can use it for free.

is a self-propelled power unit having wheels for tracks for operating agriculture implements and machines including trailers. A) Car B) Tractor C) Motorcycle D) Truck

Description : is a self-propelled power unit having wheels for tracks for operating agriculture implements and machines including trailers. A) Car B) Tractor C) Motorcycle D) Truck

Last Answer : Truck

Suppose a few teachers are busy in cracking filthy jokes during their leisure time in school, you are also member of that group but unable to stop them. What would you like to do to avoid it? Options: A) You persuade them not to waste their leisure time in filthy jokes B) You change the group or live in isolation because you don't relish it C) You instruct them to mind their language while cracking jokes in school D) You criticise and remind them of their noble profession

Description : Suppose a few teachers are busy in cracking filthy jokes during their leisure time in school, you are also member of that group but unable to stop them. What would you like to do to ... mind their language while cracking jokes in school D) You criticise and remind them of their noble profession

Last Answer : A) You persuade them not to waste their leisure time in filthy jokes 

Who uses a tractor and a plough?

Description : Who uses a tractor and a plough?

Last Answer : TAFE Motors and Tractors Limited

.Increase length of a land slide of a one bottom right hand mould board plough will a) Increase the amount of offset on tractor b) Decrease the amount of offset c) No affect d) Affect Completely

Description : .Increase length of a land slide of a one bottom right hand mould board plough will a) Increase the amount of offset on tractor b) Decrease the amount of offset c) No affect d) Affect Completely

Last Answer : c) No affect

the time taken to plough one acre farm with 35 hp tractor is : A)60 minutes b)75 minutes C)90 minutes d)120 minutes

Description : the time taken to plough one acre farm with 35 hp tractor is : A)60 minutes b)75 minutes C)90 minutes d)120 minutes

Last Answer : b)75 minutes

The work done in sliding a block of weight of 50 kg up a plane inclined at an angle of 30? to the horizontal so that the block is lifted through 1 m ( a.More than 50 kgm b.50 kgm c.Less than 5 kgm d.15 kgm only e.None of the above

Description : The work done in sliding a block of weight of 50 kg up a plane inclined at an angle of 30? to the horizontal so that the block is lifted through 1 m ( a.More than 50 kgm b.50 kgm c.Less than 5 kgm d.15 kgm only e.None of the above

Last Answer : a. More than 50 kgm

A single purchase crab has a handle 45 cm long and a drum of 25 cm diameter. The pinion has 30 teeth and spur has 150 teeth. The efficiency of the machine is 75%. If the maximum force that can be applied is 500 newtons, the maximum load that can be lifted will be a.9860 N b.6750 N c.20250 N d.1250 N e.13500 N

Description : A single purchase crab has a handle 45 cm long and a drum of 25 cm diameter. The pinion has 30 teeth and spur has 150 teeth. The efficiency of the machine is 75%. If the maximum force that can be applied is ... maximum load that can be lifted will be a.9860 N b.6750 N c.20250 N d.1250 N e.13500 N

Last Answer : b. 6750 N

While increasing the forward speed of the combine harvester speed of reel should be a) Increased in same ratio b) Decreased in same ratio c) No changes d) Doubled Ans. a

Description : While increasing the forward speed of the combine harvester speed of reel should be a) Increased in same ratio b) Decreased in same ratio c) No changes d) Doubled Ans. a

Last Answer : ans a

The nature of loading at various locations and other surfaces conditions called a.friction b.traction c.boundary condition d.surfacing

Description : The nature of loading at various locations and other surfaces conditions called a.friction b.traction c.boundary condition d.surfacing

Last Answer : c.boundary condition

The art of subdividing the structure into a convenient number of smaller elements is knownas a.discretization b.assemblage c.continuum d.traction

Description : The art of subdividing the structure into a convenient number of smaller elements is knownas a.discretization b.assemblage c.continuum d.traction

Last Answer : a.discretization

Suppose the teachers are busy in cracking filthy jokes and you are also there but you are unable to stop them you should (a) Persuade them decently not to waste their time-in-filthy jokes (b) Live in isolations or change the group (c) Instruct them to mind their language while passing leisure time. (d) be critical and remind them for the nobility of their jobs.

Description : Suppose the teachers are busy in cracking filthy jokes and you are also there but you are unable to stop them you should (a) Persuade them decently not to waste their time-in-filthy jokes (b) ... language while passing leisure time. (d) be critical and remind them for the nobility of their jobs.

Last Answer : (a) Persuade them decently not to waste their time-in-filthy jokes

Suppose the teachers are busy in cracking filthy jokes and you are also there but you are unable to stop them you should Options: A) persuade them decently not to waste their time-in-filthy jokes B) live in isolation or change the group C) instruct them to mind their language while passing leisure time D) be critical and remind them for the nobility of their jobs

Description : Suppose the teachers are busy in cracking filthy jokes and you are also there but you are unable to stop them you should Options: A) persuade them decently not to waste their time-in-filthy ... their language while passing leisure time D) be critical and remind them for the nobility of their jobs

Last Answer : A) persuade them decently not to waste their time-in-filthy jokes