The disc angle of a disc plough ranges from? [a] 40-45 degree [b] 30-35 degree [c] 20-25 degree [d] 45-50 degree [e] None of the above

The disc angle of a disc plough ranges from?
[a] 40-45 degree
[b] 30-35 degree
[c] 20-25 degree
[d] 45-50 degree
[e] None of the above
by

1 Answer

Answer :

[a] 40-45 degree
by

Related questions

Disc angle in a standard disc plough varies from a. 25-35 ° c. 45-55 ° d. 55-65 °

Description : Disc angle in a standard disc plough varies from a. 25-35 ° c. 45-55 ° d. 55-65 °

Last Answer : Ans - b. 42-45 °

The spacing between the discs in the gang bolt ranges cm for lighy duty and cm heavy -duty harrows i. 15-25 and 25-30 c) 40-45 and 45-50 ii. 20-30 and 30-40. d) 15-25 and 32-36

Description : The spacing between the discs in the gang bolt ranges cm for lighy duty and cm heavy -duty harrows i. 15-25 and 25-30 c) 40-45 and 45-50 ii. 20-30 and 30-40. d) 15-25 and 32-36

Last Answer : 15-25 and 25-30

In India post-harvest losses of fruit and vegetable is… per cent of the total production. a) 15-20 b) 50-50 c) 40-45 d) 25-30

Description : In India post-harvest losses of fruit and vegetable is… per cent of the total production. a) 15-20 b) 50-50 c) 40-45 d) 25-30

Last Answer : a) 15-20

Tilt angle of a disc plough is generally— (A) 10° (B) 15° (C) 20° (D) 45°

Description : Tilt angle of a disc plough is generally— (A) 10° (B) 15° (C) 20° (D) 45°

Last Answer : (D) 45°

1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50'. What number is missing? -Riddles

Description : 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50'. What number is missing? -Riddles

Last Answer : 22

P and Q can do a piece of job in 24 days; Q and R can do it in 30 days while R and P can finish it in 40 days. If P, Q, Rworks together, in how many days will they finish the job? In how many days will each one of them finish it, working alone? A) 15,25,35,45 B) 20,30,40,120 C) 20,30,40,50 D) 20,25,30,60

Description : P and Q can do a piece of job in 24 days; Q and R can do it in 30 days while R and P can finish it in 40 days. If P, Q, Rworks together, in how many days will they finish the job? In how many days will each ... finish it, working alone? A) 15,25,35,45 B) 20,30,40,120 C) 20,30,40,50 D) 20,25,30,60 

Last Answer : B Time taken by (P + Q) to finish the job = 24days. (P + Q)'s 1 day's job = 1/24 Time taken by (Q +R) to finish the job = 30days. (Q + R)'s 1 day's job = 1/30 Time taken by (R + P) to finish the ... - {(P + Q)'s 1 day's job } = (1/20 -1/24)=1/120 Hence, R alone can finish the job in 120 days.

What is the size of Basin (sqm) in Check Basin Method of Irrigation? [a] 05- 20 sqm [b] 15- 30 sqm [c] 20- 35 sqm [d] 25- 40 sqm [e] None of the above

Description : What is the size of Basin (sqm) in Check Basin Method of Irrigation? [a] 05- 20 sqm [b] 15- 30 sqm [c] 20- 35 sqm [d] 25- 40 sqm [e] None of the above

Last Answer : [c] 20- 35 sqm

The draft of ‘Victory plough’ is— (A) 80-100 kg (B) 40-50 kg(C) 70-80 kg (D) 10-20 kg

Description : The draft of ‘Victory plough’ is— (A) 80-100 kg (B) 40-50 kg(C) 70-80 kg (D) 10-20 kg

Last Answer : (A) 80-100 kg

Protein content in pulses ranges from(a) 10-15% (b) 20-25% (c) 25-30% (d) 40-45%

Description : Protein content in pulses ranges from(a) 10-15% (b) 20-25% (c) 25-30% (d) 40-45%

Last Answer : (b) 20-25%

Standard disc Plough consists of steel disc of _ diameter a) 20 to 40 cm. c) 60 to 90 cm b) 30 to 60 cm. d) 70 to 100 cm

Description : Standard disc Plough consists of steel disc of _ diameter a) 20 to 40 cm. c) 60 to 90 cm b) 30 to 60 cm. d) 70 to 100 cm

Last Answer :  60 to 90 cm

Where the intensity of dust is not severe generally pre- cleaners a placed above the tractor hood about a) 35 cm b) 40 cm c) 45 cm d) 50 cm

Description : Where the intensity of dust is not severe generally pre- cleaners a placed above the tractor hood about a) 35 cm b) 40 cm c) 45 cm d) 50 cm

Last Answer : a) 35 cm

'Utilities' in a chemical process plant includes compressed air, steam, water, electrical power, oxygen, acetylene, fuel gases etc. Utility costs for ordinary chemical process plants ranges roughly from __________ percent of the total product cost. (A) 1 to 5 (B) 10 to 20 (C) 25 to 35 (D) 35 to 45

Description : 'Utilities' in a chemical process plant includes compressed air, steam, water, electrical power, oxygen, acetylene, fuel gases etc. Utility costs for ordinary chemical process plants ranges roughly from __________ percent of the total product ... 1 to 5 (B) 10 to 20 (C) 25 to 35 (D) 35 to 45

Last Answer : (B) 10 to 20

The average age of the whole class is 12.05 years. The average age of all girls is 12.5 years and the average age of boys is 11.75 years. If the total number of boys is 45 then what is the total number of girls in the class? a) 20 b) 25 c) 30 d) 35 e) 40

Description : The average age of the whole class is 12.05 years. The average age of all girls is 12.5 years and the average age of boys is 11.75 years. If the total number of boys is 45 then what is the total number of girls in the class? a) 20 b) 25 c) 30 d) 35 e) 40

Last Answer : Let the number of girls be x. The number of boys is 45. :. Total age of boys and girls in the class = (x+45) × 12.05 or, (x+45) × 12.05 = 45 × 11.75 + x × 12.5 or, 12.05x + 542.25 = 528.75 + 12.5x or, 13.5 = 0.45x or, x = 13.5/0.45 = 30 Answer is: c)

The normal values of over flow rates for secondary sedimentation tanks, ranges between A. 25,000 to 35,000 litres/sqm/day B. 40,000 to 50,000 litres/sqm/day C. 50,000 to 60,000 litres/sqm/day D. 80,000 to 10,000 litres/sqm/day

Description : The normal values of over flow rates for secondary sedimentation tanks, ranges between A. 25,000 to 35,000 litres/sqm/day B. 40,000 to 50,000 litres/sqm/day C. 50,000 to 60,000 litres/sqm/day D. 80,000 to 10,000 litres/sqm/day

Last Answer : ANS: A

The normal value of over flow rates for plain primary sedimentation tanks, ranges between A. 25,000 to 35,000 litres/sqm/day B. 40,000 to 50,000 litres/sqm/day C. 50,000 to 60,000 litres/sqm/day D. 80,000 to 100,000 litres/sqm/day

Description : The normal value of over flow rates for plain primary sedimentation tanks, ranges between A. 25,000 to 35,000 litres/sqm/day B. 40,000 to 50,000 litres/sqm/day C. 50,000 to 60,000 litres/sqm/day D. 80,000 to 100,000 litres/sqm/day

Last Answer : ANS: B

The normal values of over flow rates for sedimentation tanks using coagulant, ranges between A. 25,000 to 35,000 litres/sqm/day B. 40,000 to 50,000 litres/sqm/day C. 50,000 to 60,000 litres/sqm/day D. 80,000 to 100,000 litres/sqm/day

Description : The normal values of over flow rates for sedimentation tanks using coagulant, ranges between A. 25,000 to 35,000 litres/sqm/day B. 40,000 to 50,000 litres/sqm/day C. 50,000 to 60,000 litres/sqm/day D. 80,000 to 100,000 litres/sqm/day

Last Answer : ANS: C

How many HP for tractor is suitable suitable for 20 hectares farm? A. 10-15 C. 20-25. B. 30-35 D. 40-45

Description : How many HP for tractor is suitable suitable for 20 hectares farm? A. 10-15 C. 20-25. B. 30-35 D. 40-45

Last Answer : 20-25

Standard disc plough diameter size is A. 40 to 60 cm C. 70 to 90 cm B. 60 to 90 cm D. 50 to 70 cm

Description : Standard disc plough diameter size is A. 40 to 60 cm C. 70 to 90 cm B. 60 to 90 cm D. 50 to 70 cm

Last Answer : 60 to 90 cm

Which of the following ranges identifies the amount of pressure within the endotracheal tube cuff that is believed to prevent both injury and aspiration? a) 20-25 mm Hg water pressure. Usually the pressure is maintained at less than 25 cm water pressure to prevent injury and at more than 20 cm water pressure to prevent aspiration. b) 10-15 mm Hg water pressure. A measure of 10–15 mm Hg water pressure would indicate that the cuff is underinflated. c) 30-35 mm Hg water pressure. A measure of 30–35 mm Hg water pressure would indicate that the cuff is overinflated. d) 0-5 mm Hg water pressure A measure of 0-5 mm Hg water pressure would indicate that the cuff is underinflated.

Description : Which of the following ranges identifies the amount of pressure within the endotracheal tube cuff that is believed to prevent both injury and aspiration? a) 20-25 mm Hg water pressure. Usually the ... pressure A measure of 0-5 mm Hg water pressure would indicate that the cuff is underinflated.

Last Answer : a) 20-25 mm Hg water pressure. Usually the pressure is maintained at less than 25 cm water pressure to prevent injury and at more than 20 cm water pressure to prevent aspiration.

Sub soilders are operated at maximum depth of (a) 30-40 cm (b) 45-75 cm (c) 75-90 cm (d) 10-20 cm

Description : Sub soilders are operated at maximum depth of (a) 30-40 cm (b) 45-75 cm (c) 75-90 cm (d) 10-20 cm

Last Answer : (b) 45-75 cm

At what angle must zig zag bracing be installed? a. 35-55 degree b. 35-60 degree c. 25-45 degree d. 35-70 degree

Description : At what angle must zig zag bracing be installed? a. 35-55 degree b. 35-60 degree c. 25-45 degree d. 35-70 degree

Last Answer : a. 35-55 degree

A tractor engine is operated at full load approximately a) 20-25% of the operating times b) 25-30% of the operating time c) 30-35% of the operating time d) 35-40% of operating time

Description : A tractor engine is operated at full load approximately a) 20-25% of the operating times b) 25-30% of the operating time c) 30-35% of the operating time d) 35-40% of operating time

Last Answer : b) 25-30% of the operating time

How much seed per hectare is needed for Berseem ? (a) 18 — 22 kg (b) 25 — 30 kg (c) 30 – 35 kg (d) 15 — 20 kg

Description : How much seed per hectare is needed for Berseem ? (a) 18 — 22 kg (b) 25 — 30 kg (c) 30 – 35 kg (d) 15 — 20 kg

Last Answer : (b) 25 — 30 kg

Horse latitude lies in between north and south latitudinal belt of equator (A)0 to 50 (B) 30 to 35 (C) 20 to 250 (D) 10 to 15

Description : Horse latitude lies in between north and south latitudinal belt of equator (A)0 to 50 (B) 30 to 35 (C) 20 to 250 (D) 10 to 15

Last Answer : (B) 30 to 35

The percentage of chlorine in fresh bleaching powder is roughly (A) 50 to 60 (B) 30 to 35 (C) 40 to 50 (D) 20 to 25

Description : The percentage of chlorine in fresh bleaching powder is roughly (A) 50 to 60 (B) 30 to 35 (C) 40 to 50 (D) 20 to 25

Last Answer : (B) 30 to 35

Ash content in the middling coal (a byproduct of coal washeries) in India ranges between __________ percent. (A) 15 to 25 (B) 35 to 45 (C) 55 to 75 (D) 75

Description : Ash content in the middling coal (a byproduct of coal washeries) in India ranges between __________ percent. (A) 15 to 25 (B) 35 to 45 (C) 55 to 75 (D) 75

Last Answer : (B) 35 to 45

Seed rate of lentil crop is —kg/ha a. 12 to 15 b. 20 to 25 c. 30 to 40 d. 45 to 50

Description : Seed rate of lentil crop is —kg/ha a. 12 to 15 b. 20 to 25 c. 30 to 40 d. 45 to 50

Last Answer : c. 30 to 40

The contribution of Agricultural sector to the gross domestic product (GDP) in India in the year 2004-05 has been nearly (A) 25 % (B) 45 % (C) 35 % (D) 55 %

Description : The contribution of Agricultural sector to the gross domestic product (GDP) in India in the year 2004-05 has been nearly (A) 25 % (B) 45 % (C) 35 % (D) 55 %

Last Answer : (A) 25 %

One gram of glucose produces how much fat or oil (A) 0.25 g (B) 0.35 g (C) 0.45 g (D) 0.32 g

Description : One gram of glucose produces how much fat or oil (A) 0.25 g (B) 0.35 g (C) 0.45 g (D) 0.32 g

Last Answer : (C) 0.45 g

If the spark plugs have become found it should be cleaned after working hours of a) 25 hours b) 30 hours c) 40 hours d) 50 hours

Description : If the spark plugs have become found it should be cleaned after working hours of a) 25 hours b) 30 hours c) 40 hours d) 50 hours

Last Answer : d) 50 hours

Reading of brix hydrometer ranges from a) 0-10 b) 0-15 c) 0-20 d) 0-30

Description : Reading of brix hydrometer ranges from a) 0-10 b) 0-15 c) 0-20 d) 0-30

Last Answer : d) 0-30

Pegging stage in groundnut comes after (a) 30 D.A.S. (b) 45 D.A.S. (c) 55 D.A.S. (d) 35 D.A.S.

Description : Pegging stage in groundnut comes after (a) 30 D.A.S. (b) 45 D.A.S. (c) 55 D.A.S. (d) 35 D.A.S.

Last Answer : (c) 55 D.A.S.

A reinforced concrete cantilever beam is 3.6 m long, 25 cm wide and has its lever arm 40 cm. It carries a load of 1200 kg at its free end and vertical stirrups can carry 1800 kg. Assuming concrete to carry one-third of the diagonal tension and ignoring the weight of the beam, the number of shear stirrups required, is (A) 30 (B) 35 (C) 40 (D) 45

Description : A reinforced concrete cantilever beam is 3.6 m long, 25 cm wide and has its lever arm 40 cm. It carries a load of 1200 kg at its free end and vertical stirrups can carry 1800 kg. Assuming concrete to carry one- ... beam, the number of shear stirrups required, is (A) 30 (B) 35 (C) 40 (D) 45

Last Answer : Answer: Option C

Equipment installation cost in a chemical process plant ranges from __________ percent of the purchased equipment cost. (A) 10 to 20 (B) 35 to 45 (C) 55 to 65 (D) 70 to 80

Description : Equipment installation cost in a chemical process plant ranges from __________ percent of the purchased equipment cost. (A) 10 to 20 (B) 35 to 45 (C) 55 to 65 (D) 70 to 80

Last Answer : (B) 35 to 45

Cost of instrumentation in a modern chemical plant ranges from __________ percent of the total plant cost. (A) 5 to 10 (B) 20 to 30 (C) 40 to 50 (D) 60 to 70

Description : Cost of instrumentation in a modern chemical plant ranges from __________ percent of the total plant cost. (A) 5 to 10 (B) 20 to 30 (C) 40 to 50 (D) 60 to 70

Last Answer : (B) 20 to 30

Menopause usually occurs between (a) 30 and 35 years (b) 35 and 40 years (c) 40 and 45 years (d) 45 and 50 years

Description : Menopause usually occurs between (a) 30 and 35 years (b) 35 and 40 years (c) 40 and 45 years (d) 45 and 50 years

Last Answer : Ans:(d)

In disc ploughs tilt angel varies between b. 25-35° c. 35-45° d. 45-50°

Description : In disc ploughs tilt angel varies between b. 25-35° c. 35-45° d. 45-50°

Last Answer : Ans -   a. 15-25°

The optimum seed rate of Blackgram in rice fallows of Andhra Pradesh ( Kg/ha) a] 10-15 b] 15-20 c] 25-30 d] 40-5

Description : The optimum seed rate of Blackgram in rice fallows of Andhra Pradesh ( Kg/ha) a] 10-15 b] 15-20 c] 25-30 d] 40-5

Last Answer : d] 40-50

Fertilizer dose recommended for a crop of Groundnut is N:P:K, respectively (a) 20-40: 50-60: 30-40 (b) 40-50: 50-60: 30-40 (c) 20-40 : 60-80: 30-50 (d) 40-50 : 60-80: 30-50

Description : Fertilizer dose recommended for a crop of Groundnut is N:P:K, respectively (a) 20-40: 50-60: 30-40 (b) 40-50: 50-60: 30-40 (c) 20-40 : 60-80: 30-50 (d) 40-50 : 60-80: 30-50

Last Answer : (a) 20-40: 50-60: 30-40

The standard angle between the sides of a V-belt is a.30? b.25? c.40? d.45? e.55?

Description : The standard angle between the sides of a V-belt is a.30? b.25? c.40? d.45? e.55?

Last Answer : a. 30?

models of tractor are being produce in India in different HP ranges. A) 39 B) 40 C) 50 D) 45

Description : models of tractor are being produce in India in different HP ranges. A) 39 B) 40 C) 50 D) 45

Last Answer :  39

In finish machining of an island on a casting with CNC milling machine, an end mill with 10 mm diameter is employed. The corner points of the island are represented by (0, 0), (0, 30), (50, 30) and (50, 0). By applying cutter radius right compensation, the trajectory of the cutter will be a.(-5, 0), (-5, 35), (55, 35), (55,-5), (-5,-5) b.(0,-5), (55,-5), (55, 35), (-5, 35), (-5,-5) c.(5, 5), (5, 25), (45, 25), (45, 5), (5, 5) d.(5, 5), (45, 5), (45, 25), (5, 25), (5, 5)

Description : In finish machining of an island on a casting with CNC milling machine, an end mill with 10 mm diameter is employed. The corner points of the island are represented by (0, 0), (0, 30), (50, 30) and (50, 0). By applying cutter radius right ... , 5), (5, 5) d.(5, 5), (45, 5), (45, 25), (5, 25), (5, 5)

Last Answer : a.(-5, 0), (-5, 35), (55, 35), (55,-5), (-5,-5)

If 20 kg of coarse aggregate is sieved through 80 mm, 40 mm, 20 mm, 10 mm, 4.75 mm, 2.36 mm, 1.18 mm, 600 micron, 300 micron and 150 micron standard sieves and the weights retained are 0 kg, 2 kg, 8 kg, 6 kg, 4 kg respectively, the fineness modulus of the aggregate, is (A) 7.30 (B) 7.35 (C) 7.40 (D) 7.45

Description : If 20 kg of coarse aggregate is sieved through 80 mm, 40 mm, 20 mm, 10 mm, 4.75 mm, 2.36 mm, 1.18 mm, 600 micron, 300 micron and 150 micron standard sieves and the weights retained are 0 kg, 2 kg, 8 kg, ... , the fineness modulus of the aggregate, is (A) 7.30 (B) 7.35 (C) 7.40 (D) 7.45

Last Answer : Answer: Option C

The bearing capacity of granite is generally (A) 5 to 10 kg/cm2 (B) 15 to 20 kg/cm2 (C) 30 to 35 kg/cm2 (D) 40 to 45 kg/cm2

Description : The bearing capacity of granite is generally (A) 5 to 10 kg/cm2 (B) 15 to 20 kg/cm2 (C) 30 to 35 kg/cm2 (D) 40 to 45 kg/cm2

Last Answer : Answer: Option C

Knife clips are placed with wearing plates spaced to apart a) 20 to 30 b) 45 to 60 c) 20 to 35 d) 30 to 40

Description : Knife clips are placed with wearing plates spaced to apart a) 20 to 30 b) 45 to 60 c) 20 to 35 d) 30 to 40

Last Answer : 20 to 30

The economical diesel fuels have got octane rating varying from a) 30 to 50 b) 30 to 60 c) 20 to 30 d) 25 to 30

Description : The economical diesel fuels have got octane rating varying from a) 30 to 50 b) 30 to 60 c) 20 to 30 d) 25 to 30

Last Answer : b) 30 to 60

Penetration of disc plough can be improved by a. Increasing disc angle b. Decreasing tilt angle c. Both a & b d. None of these

Description : Penetration of disc plough can be improved by a. Increasing disc angle b. Decreasing tilt angle c. Both a & b d. None of these

Last Answer : b. Decreasing tilt angle

Working width of disc plough can be increased by a) Disc angle b) Gang angle c) Vertical suction d) Horizontal clearance Ans. a

Description : Working width of disc plough can be increased by a) Disc angle b) Gang angle c) Vertical suction d) Horizontal clearance Ans. a

Last Answer : ans a

The adjustment in MB plough for increasing the depth of operation a) Vertical suction b) Horizontal suction c) Gang angle d) Disc angle Ans. a

Description : The adjustment in MB plough for increasing the depth of operation a) Vertical suction b) Horizontal suction c) Gang angle d) Disc angle Ans. a

Last Answer : ans a

The disc angle of a good plough varies between a) 25°-30° b) 10°-15° c) 18°-24° d) 42°-45°

Description : The disc angle of a good plough varies between a) 25°-30° b) 10°-15° c) 18°-24° d) 42°-45°

Last Answer : 42°-45°