The information in ROM is stored (A) By the user any number of times. (B) By the manufacturer during fabrication of the device. (C) By the user using ultraviolet light. (D) By the user once and only once.

The information in ROM is stored
(A) By the user any number of times.
(B) By the manufacturer during fabrication of the device.
(C) By the user using ultraviolet light.
(D) By the user once and only once.
by

1 Answer

Answer :

(B) By the manufacturer during fabrication of the device.
by

Related questions

In a RAM, information can be stored (A) By the user, number of times. (B) By the user, only once. (C) By the manufacturer, a number of times. (D) By the manufacturer only once.

Description : In a RAM, information can be stored (A) By the user, number of times. (B) By the user, only once. (C) By the manufacturer, a number of times. (D) By the manufacturer only once.

Last Answer : Ans: A RAM is used by the user, number of times.

The ______ can be programmed one time either the manufacturer or the computer user.Once programmed it cannot be modified. A. PROM B. EPROM C. RAM D. ROM

Description : The ______ can be programmed one time either the manufacturer or the computer user.Once programmed it cannot be modified. A. PROM B. EPROM C. RAM D. ROM

Last Answer : D. ROM

The access time of ROM using bipolar transistors is about (A) 1 sec (B) 1 msec (C) 1 µsec (D) 1 nsec.

Description : The access time of ROM using bipolar transistors is about (A) 1 sec (B) 1 msec (C) 1 µsec (D) 1 nsec.

Last Answer : Ans: C The access time of ROM using bipolar transistors is about 1 µ sec.

EPROM contents can be erased by exposing it to (A) Ultraviolet rays. (B) Infrared rays. (C) Burst of microwaves. (D) Intense heat radiations.

Description : EPROM contents can be erased by exposing it to (A) Ultraviolet rays. (B) Infrared rays. (C) Burst of microwaves. (D) Intense heat radiations.

Last Answer : (A) Ultraviolet rays. EPROM contents can be erased by exposing it to Ultraviolet rays (The Ultraviolet light passes through a window in the IC package to the EPROM chip where it releases stored charges. Thus the stored contents are erased).

Which of following can not be accessed randomly (A) DRAM. (B) SRAM. (C) ROM. (D) Magnetic tape.

Description : Which of following can not be accessed randomly (A) DRAM. (B) SRAM. (C) ROM. (D) Magnetic tape.

Last Answer : Ans: D Magnetic tape can only be accessed sequentially.

Which of following requires refreshing? (A) SRAM. (B) DRAM. (C) ROM. (D) EPROM.

Description : Which of following requires refreshing? (A) SRAM. (B) DRAM. (C) ROM. (D) EPROM.

Last Answer : (B) DRAM

The process of entering data into a ROM is called (A) burning in the ROM (B) programming the ROM (C) changing the ROM (D) charging the ROM

Description : The process of entering data into a ROM is called (A) burning in the ROM (B) programming the ROM (C) changing the ROM (D) charging the ROM

Last Answer : Ans: B The process of entering data into ROM is known as programming the ROM.

Which of the memory is volatile memory (A) ROM (B) RAM (C) PROM (D) EEPROM

Description : Which of the memory is volatile memory (A) ROM (B) RAM (C) PROM (D) EEPROM

Last Answer : Ans: B RAM is a volatile memory (Volatile memory means the contents of the RAM get erased as soon as the power goes off.)

Words having 8-bits are to be stored into computer memory. The number of lines required for writing into memory are (A) 1. (B) 2. (C) 4. (D) 8.

Description : Words having 8-bits are to be stored into computer memory. The number of lines required for writing into memory are (A) 1. (B) 2. (C) 4. (D) 8.

Last Answer : Ans: D Because 8-bit words required 8 bit data lines.

The logic 0 level of a CMOS logic device is approximately (A) 1.2 volts (B) 0.4 volts (C) 5 volts (D) 0 volts

Description : The logic 0 level of a CMOS logic device is approximately (A) 1.2 volts (B) 0.4 volts (C) 5 volts (D) 0 volts

Last Answer : Ans: D CMOS logic low level is 0 volts approx.

A device which converts BCD to Seven Segment is called (A) Encoder (B) Decoder (C) Multiplexer (D) Demultiplexer

Description : A device which converts BCD to Seven Segment is called (A) Encoder (B) Decoder (C) Multiplexer (D) Demultiplexer

Last Answer : Ans: B A device which converts BCD to Seven Segment is called DECODER. (A decoder coverts binary words into alphanumeric characters.)

The device which changes from serial data to parallel data is (A) COUNTER (B) MULTIPLEXER (C) DEMULTIPLEXER (D) FLIP-FLOP

Description : The device which changes from serial data to parallel data is (A) COUNTER (B) MULTIPLEXER (C) DEMULTIPLEXER (D) FLIP-FLOP

Last Answer : Ans: C The device which changes from serial data to parallel data is demultiplexer. (A demultiplexer takes in data from one line and directs it to any of its N outputs depending on the status of the select inputs.)

1’s complement representation of decimal number of -17 by using 8 bit representation is (A) 1110 1110 (B) 1101 1101 (C) 1100 1100 (D) 0001 0001

Description : 1’s complement representation of decimal number of -17 by using 8 bit representation is (A) 1110 1110 (B) 1101 1101 (C) 1100 1100 (D) 0001 0001

Last Answer : (A) 1110 1110

A 4-bit synchronous counter uses flip-flops with propagation delay times of 15 ns each. The maximum possible time required for change of state will be (A) 15 ns. (B) 30 ns. (C) 45 ns. (D) 60 ns.

Description : A 4-bit synchronous counter uses flip-flops with propagation delay times of 15 ns each. The maximum possible time required for change of state will be (A) 15 ns. (B) 30 ns. (C) 45 ns. (D) 60 ns.

Last Answer : Ans: A 15 ns because in synchronous counter all the flip-flops change state at the same time.

A weighted resistor digital to analog converter using N bits requires a total of (A) N precision resistors. (B) 2N precision resistors. (C) N + 1 precision resistors. (D) N – 1 precision resistors.

Description : A weighted resistor digital to analog converter using N bits requires a total of (A) N precision resistors. (B) 2N precision resistors. (C) N + 1 precision resistors. (D) N – 1 precision resistors.

Last Answer : (A) N precision resistors.

The output of a JK flipflop with asynchronous preset and clear inputs is ‘1’. The output can be changed to ‘0’ with one of the following conditions. (A) By applying J = 0, K = 0 and using a clock. (B) By applying J = 1, K = 0 and using the clock. (C) By applying J = 1, K = 1 and using the clock. (D) By applying a synchronous preset input.

Description : The output of a JK flipflop with asynchronous preset and clear inputs is 1'. The output can be changed to 0' with one of the following conditions. (A) By applying J = 0, K = 0 and using a clock. (B) ... (C) By applying J = 1, K = 1 and using the clock. (D) By applying a synchronous preset input.

Last Answer : Ans: C Preset state of JK Flip-Flop =1 With J=1 K=1 and the clock next state will be complement of the present state.

Data can be changed from special code to temporal code by using (A) Shift registers (B) counters (C) Combinational circuits (D) A/D converters.

Description : Data can be changed from special code to temporal code by using (A) Shift registers (B) counters (C) Combinational circuits (D) A/D converters.

Last Answer : Ans: A Data can be changed from special code to temporal code by using Shift Registers. (A Register in which data gets shifted towards left or right when clock pulses are applied is known as a Shift Register.)

How is preheat for tack welds during assembly and fit up determined? a) By the welders as they have extensive knowledge b) The fabrication specification/WPS will give the requirements c) The fabrication drawing will give all the information d) Any temperature will do as it is only a tack weld

Description : How is preheat for tack welds during assembly and fit up determined? a) By the welders as they have extensive knowledge b) The fabrication specification/WPS will give the requirements c) The fabrication drawing will give all the information d) Any temperature will do as it is only a tack weld

Last Answer : b) The fabrication specification/WPS will give the requirements

Convert the decimal number 3.375 to binary. 132) A) 0101.1100 B) 0011.1010 C) 0011.0011 D) 0011.01

Description : Convert the decimal number 3.375 to binary. 132) A) 0101.1100 B) 0011.1010 C) 0011.0011 D) 0011.01

Last Answer : D) 0011.01

Any number with an exponent of one is equal to 128) A) two. B) itself. C) zero. D) on

Description : Any number with an exponent of one is equal to 128) A) two. B) itself. C) zero. D) on

Last Answer : B) itself.

Convert the binary number 0001.0010 to decimal. 121) A) 1.20 B) 1.40 C) 1.125 D)

Description : Convert the binary number 0001.0010 to decimal. 121) A) 1.20 B) 1.40 C) 1.125 D)

Last Answer : C) 1.125

How many different symbols are used in the octal number system? 108) A) ten B) two C) seven D) eight

Description : How many different symbols are used in the octal number system? 108) A) ten B) two C) seven D) eight

Last Answer : D) eight

Convert the binary number 10010.0100 to decimal. 103) A) 16.25 B) 18.25 C) 18.40 D) 24.50

Description : Convert the binary number 10010.0100 to decimal. 103) A) 16.25 B) 18.25 C) 18.40 D) 24.50

Last Answer : B) 18.25

Convert the decimal number 0.0625 to binary. 100) A) 0000.0111 B) 0000.1110 C) 0000.0011 D) 0000.0001

Description : Convert the decimal number 0.0625 to binary. 100) A) 0000.0111 B) 0000.1110 C) 0000.0011 D) 0000.0001

Last Answer : D) 0000.0001

Which numbering formats are really codes rather than true number systems? 96) A) hexadecimal and octal B) binary and octal C) decimal and binary D) BCD and ASCII

Description : Which numbering formats are really codes rather than true number systems? 96) A) hexadecimal and octal B) binary and octal C) decimal and binary D) BCD and ASCII

Last Answer : Which numbering formats are really codes rather than true number systems?

Convert the decimal number 10.5 to binary. 92) A) 1100.1000 B) 1010.0101 C) 1010.1000 D) 1011.1000

Description : Convert the decimal number 10.5 to binary. 92) A) 1100.1000 B) 1010.0101 C) 1010.1000 D) 1011.1000

Last Answer : C) 1010.1000

Convert the decimal number 14.875 to binary. 87) A) 1110.0111 B) 1110.1110 C) 1111.1011 D) 1100.1100

Description : Convert the decimal number 14.875 to binary. 87) A) 1110.0111 B) 1110.1110 C) 1111.1011 D) 1100.1100

Last Answer : B) 1110.1110

What numeric symbols are used in the binary number system? 58) A) 0 through 8 B) 0, 1, 2 C) 1, 2 D) 0, 1

Description : What numeric symbols are used in the binary number system? 58) A) 0 through 8 B) 0, 1, 2 C) 1, 2 D) 0, 1

Last Answer : D) 0, 1

How many unique numeric symbols are used in the decimal number system? 47) A) unlimited B) nine C) one D) ten

Description : How many unique numeric symbols are used in the decimal number system? 47) A) unlimited B) nine C) one D) ten

Last Answer : D) ten

How many symbols are used in the hexadecimal number system? 15) A) sixteen B) six C) ten D) twelve

Description : How many symbols are used in the hexadecimal number system? 15) A) sixteen B) six C) ten D) twelve

Last Answer : A) sixteen

Convert the decimal number 6.75 to binary. 14) A) 0110.1100 B) 0111.1100 C) 0110.0110 D) 0110.1010

Description : Convert the decimal number 6.75 to binary. 14) A) 0110.1100 B) 0111.1100 C) 0110.0110 D) 0110.1010

Last Answer : A) 0110.1100

Convert the decimal number 12.125 to binary. 12) A) 1100.0110 B) 1110.0010 C) 1100.0010 D) 1010.1100

Description : Convert the decimal number 12.125 to binary. 12) A) 1100.0110 B) 1110.0010 C) 1100.0010 D) 1010.1100

Last Answer : C) 1100.0010

Convert the binary number 0000.1010 to decimal. 6) A) 0.10 B) 0.55 C) 0.50 D) 0.625

Description : Convert the binary number 0000.1010 to decimal. 6) A) 0.10 B) 0.55 C) 0.50 D) 0.625

Last Answer : D) 0.625

Any number with an exponent of zero is equal to 2) A) itself. B) ten. C) zero. D) one.

Description : Any number with an exponent of zero is equal to 2) A) itself. B) ten. C) zero. D) one.

Last Answer : D) one.

The decimal equivalent of Binary number 10101 is (A) 21 (B) 31 (C) 26 (D) 28

Description : The decimal equivalent of Binary number 10101 is (A) 21 (B) 31 (C) 26 (D) 28

Last Answer : (A) 21

The 2’s complement of the number 1101110 is (A) 0010001. (B) 0010001. (C) 0010010. (D) None.

Description : The 2’s complement of the number 1101110 is (A) 0010001. (B) 0010001. (C) 0010010. (D) None.

Last Answer : Ans: C 1’s complement of 1101110 is = 0010001 Thus 2’s complement of 1101110 is = 0010001 + 1 = 0010010

The result of adding hexadecimal number A6 to 3A is (A) DD. (B) E0. (C) F0. (D) EF.

Description : The result of adding hexadecimal number A6 to 3A is (A) DD. (B) E0. (C) F0. (D) EF.

Last Answer : (B) E0.

The number of control lines for 32 to 1 multiplexer is (A) 4. (B) 5. (C) 16. (D) 6.

Description : The number of control lines for 32 to 1 multiplexer is (A) 4. (B) 5. (C) 16. (D) 6.

Last Answer : Ans: B The number of control lines for 32 (2^5) and to select one input among them total 5 select lines are required.

The number of flip flops contained in IC 7490 is (A) 2. (B) 3. (C) 4. (D) 10.

Description : The number of flip flops contained in IC 7490 is (A) 2. (B) 3. (C) 4. (D) 10.

Last Answer : (A) 2.

The number of control lines for 16 to 1 multiplexer is (A) 2. (B) 4. (C) 3. (D) 5.

Description : The number of control lines for 16 to 1 multiplexer is (A) 2. (B) 4. (C) 3. (D) 5.

Last Answer : (B) 4.

Which of the following memories stores the most number of bits (A) a 5M×8 memory. (B) a 1M × 16 memory. (C) a 5M × 4 memory. (D) a 1M ×12 memory.

Description : Which of the following memories stores the most number of bits (A) a 5M×8 memory. (B) a 1M × 16 memory. (C) a 5M × 4 memory. (D) a 1M ×12 memory.

Last Answer : Ans: A 5Mx8 = 5 x 220 x 8 = 40M (max)

The excess 3 code of decimal number 26 is (A) 0100 1001 (B) 01011001 (C) 1000 1001 (D) 01001101

Description : The excess 3 code of decimal number 26 is (A) 0100 1001 (B) 01011001 (C) 1000 1001 (D) 01001101

Last Answer : Ans: B (26)10 in BCD is ( 00100110 ) BCD Add 011 to each BCD 01011001 for excess – 3

The decimal equivalent of Binary number 11010 is (A) 26. (B) 36. (C) 16. (D) 23.

Description : The decimal equivalent of Binary number 11010 is (A) 26. (B) 36. (C) 16. (D) 23.

Last Answer : (A) 26.

In successive-approximation A/D converter, offset voltage equal to 1/2 LSB is added to the D/A converter’s output. This is done to (A) Improve the speed of operation. (B) Reduce the maximum quantization error. (C) Increase the number of bits at the output. (D) Increase the range of input voltage that can be converted

Description : In successive-approximation A/D converter, offset voltage equal to 1/2 LSB is added to the D/A converter's output. This is done to (A) Improve the speed of operation. (B) Reduce the maximum ... Increase the number of bits at the output. (D) Increase the range of input voltage that can be converted

Last Answer : (B) Reduce the maximum quantization error.

The A/D converter whose conversion time is independent of the number of bits is (A) Dual slope (B) Counter type (C) Parallel conversion (D) Successive approximation.

Description : The A/D converter whose conversion time is independent of the number of bits is (A) Dual slope (B) Counter type (C) Parallel conversion (D) Successive approximation.

Last Answer : Ans: C The A/D converter whose conversion time is independent of the Number of bits is Parallel conversion. (This type uses an array of comparators connected in parallel and comparators compare the input voltage at a particular ratio of the reference voltage).

-8 is equal to signed binary number (A) 10001000 (B) 00001000 (C) 10000000 (D) 11000000

Description : -8 is equal to signed binary number (A) 10001000 (B) 00001000 (C) 10000000 (D) 11000000

Last Answer : (A) 10001000

The code where all successive numbers differ from their preceding number by single bit is (A) Binary code. (B) BCD. (C) Excess – 3. (D) Gray.

Description : The code where all successive numbers differ from their preceding number by single bit is (A) Binary code. (B) BCD. (C) Excess – 3. (D) Gray.

Last Answer : Ans: D The code where all successive numbers differ from their preceding number by single bit is Gray Code. (It is an unweighted code. The most important characteristic of this code is that only a single bit change occurs when going from one code number to next.)

The 2’s complement of the number 1101101 is (A) 0101110 (B) 0111110 (C) 0110010 (D) 0010011

Description : The 2’s complement of the number 1101101 is (A) 0101110 (B) 0111110 (C) 0110010 (D) 0010011

Last Answer : (D) 0010011 Ans: D The 2’s complement of the number 1101101 is 0010011 (1’s complement of the number 1101101 is 0010010 2’s complement of the number 1101101is 0010010 + 1 =0010011)

The Gray code for decimal number 6 is equivalent to (A) 1100 (B) 1001 (C) 0101 (D) 0110

Description : The Gray code for decimal number 6 is equivalent to (A) 1100 (B) 1001 (C) 0101 (D) 0110

Last Answer : (C) 0101

The hexadecimal number ‘A0’ has the decimal value equivalent to (A) 80 (B) 256 (C) 100 (D) 160

Description : The hexadecimal number ‘A0’ has the decimal value equivalent to (A) 80 (B) 256 (C) 100 (D) 160

Last Answer : (D) 160